Great job! Btw. you don't need to buy the Hood Switch original from Saab only, they are identical within an OPEL, Vauxhall etc.! So just look for "Opel 90355463"
I just did this on my 9-5 07 SC A60 and DAMN did I have to dig out the connectors for the sensors. The fabric they were hidden under were glued down GOOD and the back-seat one was a bit confusing because the two connectors that go to the sensor were connected to each other so I wasn't sure if those were it.
Not all Saabs have sensors wiring. On mine 2005 9-5 combi there was only interior lights wiring. I had to replace whole roof wiring, from mirror to trunk lid. Lucky I have another 9-5 for spare parts
My Saab 95 stopped locking with remote. It does locks with the key on the door but not with the remote, Battery is ok, second key has same issue. So, the issue I believe it's on the car. Does anyone know anything about this? Cheers
Hey! Sorry, you have a ng9-3 and it's a completely different car. There might be a similar procedure as in this video, but these instructions don't apply to your car.
I have a swedish 9-3 -09, that i only installed the hoodsensor on and let the SAAB dealer code the alarm to basic stage 1, so it uses the car horn. But it works good. There is a original alarm kit you can buy(atleast in sweden) with the hoodswitch, tilt sensor and siren for the 9-3.
Exactly, the kit is available for purchase, but it's very expensive. I bought a used siren and rebuilt it (see the previous vid) and was able to do it for cheap.
Excellent video as per usual Jon.. will be following the soldering video very soon
Thanks, man :)
Great job!
Btw. you don't need to buy the Hood Switch original from Saab only, they are identical within an OPEL, Vauxhall etc.! So just look for "Opel 90355463"
Thats a great tip, thanks!
I just did this on my 9-5 07 SC A60 and DAMN did I have to dig out the connectors for the sensors. The fabric they were hidden under were glued down GOOD and the back-seat one was a bit confusing because the two connectors that go to the sensor were connected to each other so I wasn't sure if those were it.
Nice video
Where can I find the connection of the siren if it is not in the usual place?!?!
SAAB 9-5 (2006)
You are just wonderful
lol thanks
Not all Saabs have sensors wiring. On mine 2005 9-5 combi there was only interior lights wiring. I had to replace whole roof wiring, from mirror to trunk lid. Lucky I have another 9-5 for spare parts
That's interesting to hear. Which part of the world? EU car? Imported?
Trionic Seven Eu, import from Switzerland. One for parts is MY99 from Germany
My Saab 95 stopped locking with remote. It does locks with the key on the door but not with the remote, Battery is ok, second key has same issue. So, the issue I believe it's on the car. Does anyone know anything about this? Cheers
the "guide" you are talking about is the spare parts programming for twice. its under "body->twice->programming->spare parts programming"
Thanks, Simon! Yes, it became a little hectic when we had to rescue Mattiaz. You're right as always :)
Hmmm. I wonder if I can do this on my US market 2008 9-3 Aero XWD Combi.
Hey! Sorry, you have a ng9-3 and it's a completely different car. There might be a similar procedure as in this video, but these instructions don't apply to your car.
I have a swedish 9-3 -09, that i only installed the hoodsensor on and let the SAAB dealer code the alarm to basic stage 1, so it uses the car horn. But it works good.
There is a original alarm kit you can buy(atleast in sweden) with the hoodswitch, tilt sensor and siren for the 9-3.
Exactly, the kit is available for purchase, but it's very expensive. I bought a used siren and rebuilt it (see the previous vid) and was able to do it for cheap.
Ah, you meant OG9-3. I understand. Yes, my us market 08 NG9-3 already has a hood sensor and uses the horn for the alarm/panic.
09 9-3 is a ng 9-3 so he ment a ng 9-3 i assume , my saab 9-3 2008 uses both siren and horn when the "panicbutton is pushed in
Do you know anything about the install for the alarm siren in a 2011 NG 9-5?
That's a great question! Unfortunately the ng 9-5 is a completely different car.
Vet du hur man kan ta bort larmet ?
Jonathan jag har en saab 9-5 för usa marknaden men har ett larm men inga sensorer o siren
Det finns larm där man bara använder den vanliga tutan, kanske är det det du har?
Are you happy with the battery?
The alarm battery? Yeah, seems to work nicely.
But you didn't test the glass crush sensor.... :O
Brb, breaking a window, haha :D
@@TrionicSeven just arm alarm and play glass breakingg sound from phone :)
Ok