@@dondadaherb4412 I bought clips from Auto Zone. They were actually clips that were made for a Ford 150. They fit just buy a few in case you break one.
Do you know is the fuel pressure regulator part of the fuel pump on a 2008 Dodge Ram 5.7l Hemi? My fuel rail looses pressure when I just activate the fuel pump.
I do appreciate for your video on how to install a new fuel pump.my problem is how to disconnect those values clips I just don’t want to broke any one of them.
Got it. So after you remove the red safety clip there is another tab that you need to press/squeeze to open the quick release and pull away from the pump to take off. Lmk if this helps
My truck just stopped immediately. I'm thinking it's the fuel pump, the engine runs but when you put it in gear and try to drive it stops. What do you think. Thanks for the video
Hello Jabo the Mechanic, I am wondering if you could specify the make/model of the fuel pump that you used? I am currently researching fuel pumps for my 2008 Dodge Ram 1500 after a mechanic shop gave me an estimate of $1180 for a new fuel pump. This seems suspiciously high. Thanks.
Nice job but I still have flashbacks to the last time I replaced a fuel pump on an in tank Silverado on my own. You made it look easy. How long did it take you?
I’m aware it’s been a while but have gig replaced with aftermarket or OEM pump? I’m debating whether it’s worth the $250 for OEM. If you have an aftermarket has it lasted or would you have preferred OEM? Thank you.
You can bypass the relay to add power to the pump to see if it turns on and you need to make sure that you are getting 12v and a good ground at the fuel pump.
I used an ohms meter on the pump connector and saw 14v. I took the tire off to get to it. I ordered my TIPM but don’t need it now since the new pump fixed my problem.
This video gave me the direction and confidence to get my truck back up and running. Thank you for making this video!
Thank you , I helped a friend in need from watching your video
Anyone know where to get the red clip he broke . Dodge doesn’t sell them separately you have to purchase the whole line.
In the same boat need help please
@@dondadaherb4412 bought a pack of clips from Auto Zone surprisingly the clip for a Ford fit hope this helps
@@dondadaherb4412 I bought clips from Auto Zone. They were actually clips that were made for a Ford 150. They fit just buy a few in case you break one.
Did you find an answer?
Did you find an answer?
Did a good job explaining everything
Glad it helped you
@@JaboTheMechanic is it the same for 2006 , do you know?
Yes it is
Do you know is the fuel pressure regulator part of the fuel pump on a 2008 Dodge Ram 5.7l Hemi? My fuel rail looses pressure when I just activate the fuel pump.
I do appreciate for your video on how to install a new fuel pump.my problem is how to disconnect those values clips I just don’t want to broke any one of them.
If they do brake you can buy them at autozone
you must use the right tool, with the screwdriver and hammer you can produce spark and explosion, you must use bronze tool
Thanks for the input
Thanks and the best I have dodge 2500 model 2011 is the fuel pump the same as dodge 1500??
What was pushed after taking the safety clip off? Stuck on pulling that one out
Whats the exact time that you are talking about
Jabo The Mechanic 7:52
Got it. So after you remove the red safety clip there is another tab that you need to press/squeeze to open the quick release and pull away from the pump to take off. Lmk if this helps
My truck just stopped immediately. I'm thinking it's the fuel pump, the engine runs but when you put it in gear and try to drive it stops. What do you think. Thanks for the video
Hey curious what you meant by “8th digit #2 “?? And what the difference in fuel pump price? I’m trying to make sure I get the right one
I believe the difference was the angle of the feed lines. And it was a $400-500 price difference as well. It was ridiculous though
Ahhh. Thanks. But what’s the 8th digit? Digit of what? I’m just trying to understand how to know what part to order
Don’t unplug the trucks battery ?
what brand of pump did you purchase
Hello Jabo the Mechanic, I am wondering if you could specify the make/model of the fuel pump that you used? I am currently researching fuel pumps for my 2008 Dodge Ram 1500 after a mechanic shop gave me an estimate of $1180 for a new fuel pump. This seems suspiciously high. Thanks.
Hi! The fuel will cost around 800 from napa or autozone. Its the tank size you have its the 35 gallon that one is expensive
I’m surprised you didn’t fuck your engine up by the amount of dirt that fell into your tank,
Nice job but I still have flashbacks to the last time I replaced a fuel pump on an in tank Silverado on my own. You made it look easy. How long did it take you?
What do I bypass to see if it’s my fuel pump?
The fuel pump relay
Made in México i like that
I’m aware it’s been a while but have gig replaced with aftermarket or OEM pump? I’m debating whether it’s worth the $250 for OEM. If you have an aftermarket has it lasted or would you have preferred OEM? Thank you.
Why not just dropping the tank all the way?
Great video. How were you able to determine it was the fuel pump and not the fuel pump relay?
You can bypass the relay to add power to the pump to see if it turns on and you need to make sure that you are getting 12v and a good ground at the fuel pump.
@@JaboTheMechanic Do you happen to know how to bypass?
I used an ohms meter on the pump connector and saw 14v. I took the tire off to get to it. I ordered my TIPM but don’t need it now since the new pump fixed my problem.
Just cut a hole in the bed. Quick easy and efficient if you're good with the 4" angle grinder
Fuck! That looks like a shitty job to do.
Its not bad