Anker Make M5 PETG Settings, Time-Lapse, Photos. AnkerMake Silcer PETG settings that I use and work!
Вставка
- Опубліковано 19 гру 2022
- Ankermake Affiliate Link Starter Bundle: www.shareasale.com/m-pr.cfm?m...
Patreon: / micbot
Ankermake Products: shrsl.com/4ee47
Creality Products: shrsl.com/4ee97
LinkTree - 3D Printing Deals Coupons and more: linktr.ee/micbot
Don't forget to use the playback speed button if you need a slower or faster pace video.
My Printers:
AnkerMake M5 - amzn.to/3JljThS
Creality Ender 5 Pro - amzn.to/3wM18Nn
Filament that I use:
ERYONE Silk PLA - amzn.to/3BXXeUT
ERYONE PLA+ - amzn.to/3GgvddD
ERYONE PLA - amzn.to/3I3lYPj
ERYONE TPU - amzn.to/3I7zaTg
ERYONE PETG - amzn.to/3C1ZPNC
Eryone Wood PLA - amzn.to/3JoVpVq
OVERTURE PETG - amzn.to/3I38h2M
OVERTURE TPU - amzn.to/3Gjb5Yd
GIANTARM Wood PLA - amzn.to/3WItcvO
GEEETECH Glow Green - amzn.to/3wIrO1Q
GEEETECH Glow Blue - amzn.to/3jeLs26
eSun PETG - amzn.to/3HGGPHH
eSUN Silk Magic - PLA amzn.to/3GfIkuD
eSun PLA+ - amzn.to/3WpxeKl
eSUN Gloss PLA - amzn.to/3jdIlYr
eSUN PLA-LW PLA - amzn.to/405SEhE
Polymaker Matte PLA - amzn.to/3DqIz5i
Polymaker PLA+ - amzn.to/3Rg722S
Polymaker PETG - amzn.to/3jhT3gk
Polymaker Silk - amzn.to/3XMwHmo
AnkerMake M5 Series:
Part I: Anker Make M5 Unboxing ( • Mic-Bot Product Review... )
Part II: Anker Make M5 Setup ( • Mic-Bot Product Review... )
Part III: Initial Startup/Setup Test Print ( • Anker Make M5 Part III... )
Part IV: PETG Ankermake Settings ( • Anker Make M5 PETG Set... )
Part V: PLA/PLA+ Ankermake Settings ( • AnkerMake M5 Slicer Se... )
Part VI: Ankermake Slicer Walkthrough, App Walkthrough, Misc Settings and More ( • Mic-Bot Product Review... )
Part VII: TPU Settings ( • Ankermake M5 TPU Slice... )
Part VIII: Lithophane Settings and PETG Settings Update
Part IX: Coming Soon
Part X: Coming Soon
AnkerMake M5 Specs:
-5X Faster Printing
-Precise 0.1 mm Detail
-Built-In AI Camera Monitoring
-Auto-Created Timelapses
-Hub Connects Multiple Devices
-7×7 Auto-Leveling 49 Point
-Easy Assembly
-Aluminum Alloy Structure
-Print Volume 235×235×250 mm
-250 mm/s
-Print Materials: PLA/PETG/TPU/ABS
-Extruder Temperature: Maximum 500°F (260℃)
-Heating Plate Temperature: Maximum 212°F (100℃) - Наука та технологія
Your setting worked like magic!! Thank you!!!
You're welcome!
Thank you for sharing your settings.
Hey thanks for the video this has helped a lot. Still working out settings for some prints but overall this is a 100% improvement.
Glad it helped!
Yea very helpful. I was having a terrible time with the settings I used. But after video. The print came out smooth
Great video, very helpful. Can you translate the settings for PrusaSlicer? I know a lot of us are using PrusaSlicer vs AnkerMake Slicer right now.
Yep, the rotation center needs to be changed to center of the part, I agree ++!
That slicer drives me nuts!! I'm using Cura. This slicer is like 7 years behind the times.
Quite literally, it's based on an older Cura version.
@@Geoff_W That makes sense.
Thanks for this, I'm getting some good results with these settings. The only issue I'm having is that even with cooling disabled, the fans always turn on after the first couple layers, and I have to sit around and wait for it so I can go into the app and turn them back off again. Have you run into this issue?
Thanks for watching! You should be able to uncheck the cooling box in expert mode. The fan should not turn at all once it's unchecked. Let me know.
@@MicBot That's what I'm doing, but the printer apparently ignores it. It seems like possibly a software bug.
@@Noctuloquor very strange. I assume you have the latest firmware, 2.0.66?
@@MicBot Yep, firmware 2.0.66, and slicer version 0.9.6_2. I'm going to try making a custom material with Fan Speed set to 0% and see if that fixes it. I'm wondering if maybe the default 100% fan speed for PETG is overriding the print cooling setting.
EDIT: Nope, that didn't fix it.
what version of their slicer are you using? i do not like the way the recent version functions. changing settings is kind of a pain, this looks much nicer
This was the beta version of the ankerslicer from over a year ago. I think v0.6 or 0.7.
I believe Anker has started copying Bambu and locking everything in the new versions of the slicer.
do you have a full version of ankermark software. I have onle bata. Can you post the link please...... thank you
No they are all still in beta
Hi. Thanks for the video. I have yet to do my first print with PETG. Can you tell me what nozzle and bed temperatures you use, also, can you get away with printing direct onto the standard buildplate or do you use a glue stick?
Hello, a 0.4mm or higher works best with PETG. For the bed temps anywhere from 60-70 works. But always refer to the filament manufacturers recommendations. If you're using a PEI spring sheet then no glue is required.
@@MicBot thanks for your prompt reply. Sorry, I should have made it clearer, I meant what nozzle temperature, not size.
@@markmcgee6550 ah no problem. I usually print at 240 for PETG and if the material is infused it specialty PETG, Igo 250-260.
I wanted to test your settings compared to mine, but the slicer has been updated since you printed this and the defaults are no longer the same. Will you export and post your profile?
The same setting I have in the video should apply in expert mode still.
I can double check, I haven't sliced anything in a few days so I probably haven't installed the update yet.
@@MicBot Some of the settings have been renamed, and others are entirely new, along with defaults having been changed, you didn't show in the video what yours were, so IF they were changed we can't know.
could you possibly do an updated version of this because the UI is completely different now , and they use different terminology for the settings because wall thickness isn't a setting in the drop down menu anymore and so are some of the other settings you talked about lol
Hello, thank you for watching. I will try to get my hands on another Ankermake printer and start a new series on the updated settings.
But how did you get the time lapse to work? I can only see record video or screenshot on the android app, nothing in the slicing app or printer firmware.
In the app, clicked "Me" then click time-lapse, click the gear at the top right, click the toggle and time-lapse should now work. Your printer needs to be connected to wifi as well for.the time-lapse to work.
@@MicBot Ah ha! Thank you! I had tried that before but I guess they hadn't saved to my phone yet?
@@abilly you have to keep you printer on long enough for it to upload or just force upload it.
I wonder if these settings will help with my m5c I got a few days ago. Or should I try factory settings first? The m5c has a different hot end.... I live by the filament factory discounted pla I out so I have to try discounted petg
I would try the default settings first to see if Anker figured it out.
@@MicBot It's printing the fan was on 100 I put it to 25. The right side bottom was messed up because it didn't stick to the platform well. Definetly more stringy I will have to do a little sanding.... So I may have to try something for improvements.
I changed the nozzle temp to 245 its sticking and looking alot better.. gonna learn the rest from your vid
@@TcVideoHosting do not turn the fan on. Keep it off.
@@MicBot I have figured out how to make it work with basic settings on m5c The fan does mess you up if the printer is moving to fast . So I use 5% fan or 10% . When it is printing certain grids and going a certain speed then fan will ruin your print.
I am using 248- 250 nozzle temp 88-90 bed temp. 10% outer perimeter support for first layer. May have worded that wrong. Using speed set as Normal then using the phone step it down to 25% to 50% for first layer then turn it to 75 percent after it gets going.... When going 75 or 100% of normal speed having that fan going over 5% will mess your print up...
You have to watch this machine , Don't go to sleep while it's printing first couple layers with petg .. the software or something in the program can turn your fan speed up an mess your print up. I think the beds have low spots in some areas. So I am rubbing on adhesive with a paper towel. Let it dissapear then add another coat... I have z offset set to 0.08 now .. I am still learning about z offset but I am reliably printing now ... I will add some of your settings soon. Using push plastics petg
Way this an enclosed print
Yes it was.