Nissan QASHQAI DCI Lack Of Power, Engine management light on limp home, How To Repair
Вставка
- Опубліковано 26 чер 2018
- Nissan QASHQAI lack of power engine management light on and a washing noise coming from the engine on acceleration the most probable cause of this fault is this cracked pipe which I show how to fix and repair in the video it is a nice simple repair and a easy one to do yourself this problem is becoming more and more common on this particular engine and this engine is fitted in a variety of models including the Megane Clio and some Dacia models
Link to new pipe on amazon £20 amzn.to/2GypIuw
Link to Tools and Parts on Amazon www.amazon.co.uk/shop/aaanton11
Link to Repair wrap, amzn.to/2W9pdwJ - Авто та транспорт
The perfect sort of YT video. I was freaking out on Friday thinking this was gonna be a costly diagnosis and repair. Part cost £16.95 and your temporary fix got me to work on Monday.
Thanks for the great comments👍🏻👍🏻🛠
I did a full repair today, thanks to your video. Great stuff.
Thanks for the great comments 👍🏻👍🏻🛠
@@aaanton11 hi mate do you have a garage can you fix my qashqai I have the same problem
This helped me diagnose issue so quickly! top video, bought a new part for £20 and it took about 30 mins for me to fit. The engine light is still on however the car runs fine, will be resetting this using a OBD reader.
Yes sometimes a code reader is needed to reset, but it will work fine, great job, thanks for the great comments 👍🏻👍🏻
Brilliant video. Had loss of power and engine management light come on. Thankfully only 2 mins from home. Saw your video, opened up the bonnet and hey presto could see the hose had broken. Took about 10 mins once I had a replacement hose. Now in search of an OBD reader to reset the engine light. Thanks for saving me £££ not taking it to a garage.
I made a video on some code readers, here's the link ua-cam.com/video/FJMDuWnGMII/v-deo.html , hope it helps, Thanks for the great comments👍🏻👍🏻🛠
Brilliant, just lost power on the car with red engine management light, this was the first video I saw. Went and checked turbo pipe straightaway and sure enough it's split exactly as in the video! Thanks for the help, I was worried it was something much worse...
Thanks for the great comments👍🏻👍🏻🛠
Thanks for that, it happened to me now. If it wasn’t for this video I would have been panicking 😂
Thanks for the great comments 👍🏻👍🏻
Thanks... Saved my dag 👍.
On vacation in Germany. Car "humping" when cold and at low revaluations. Unable to achieve more than 100 kph. Red engine light on.
So glad I found your video. Not so worried anymore. Sure vacation will continue after a quick fix 👍👍
Great job!, Thanks for the great comments👍🏻👍🏻🛠
thanks for the vid, collecting part sat to fit, wasn't sure how to remove from the turbo with that type of clip, now I do, cheers
Thanks for the great comments 👍🏻🛠
Well done mate, helped me remove and got the old and fit the new part today
Thanks for the great comments👍🏻👍🏻🛠
Brilliant - job done in 20 mins. Many thanks.
Thanks for the great comments👍🏻👍🏻🛠
worked a treat on my 2012 Qashqai, thanks
Thanks for the great comments👍🏻👍🏻🛠
Thank you - you're spot on.. just had something similar happen to my qashqai.
Glad it helped, Thanks for the great comments👍🏻👍🏻🛠
Great video thanks for your great explanation and quality videos
Thanks for the great comments👍🏻👍🏻🛠
Great video. Thanks for sharing.
Thanks for the great comments 👍🏻👍🏻
Really helpful. Thanks
Thanks for watching 👍🏻👍🏻
Great video, clear and too the point! Thankyou!
Thanks for the great comments👍🏻👍🏻🛠
Great video and no faffing about. Ill be looking to see if this is the issue on my daughters car. Thanks for posting.
Thanks for the great comments👍🏻👍🏻🛠
Great video! Thanks a lot! ❤️
Thanks for the great comments👍🏻👍🏻🛠
Superb, thanks for the help,great video, your a gent.
Thanks for the great comments👍🏻👍🏻🛠
Life save Anton... Thanks Bro 👍
Thanks for the great comments👍🏻👍🏻🛠
Great video. Thanks. I’m hoping this is what’s wrong with my 12 plate Ntec. What is the part called? Many thanks.
It’s the air intake pipe, thanks for the great comments 👍🏻👍🏻🛠
Thanks mate worked a treat..
No problem 👍 Thanks for the great comments👍🏻👍🏻🛠
Thank you so much I had the same problem but engine management light is still on after change the hose and not pointing the aero up and down in odo when to change the gear
You might need to reset the eobd codes with a code reader, like this oneamzn.to/3l6DNOt Thanks for the great comments👍🏻👍🏻🛠
Great vid it's really helpful 👍
Glad it helped, Thanks for the great comments👍🏻👍🏻🛠
My qashqai has just come up with the red engine mgt ligt, will check and provide feedback. Can I still keep driving the car locally (2-7miles) until the parts/pipe is delivered ?
Better off doing a glue and tape repair until the new parts arrive or you will block your dpf 👍🏻👍🏻
Nice one bud worked a treat
Good to hear Thanks for the great comments👍🏻👍🏻🛠
Thumbs up just for introducing me to Kraken tape 😊
Thanks for the great comments👍🏻👍🏻🛠
Thanks for the video. Have the same issue but red engine light came on. Have stuck it back but light has come off.
Also put in some dpf cleaner.
Happy to help 👍🏻👍🏻
its a regeneration that will clear your dpf unless its clogged to max which is 65grams . if its at max, you need to take it out , flip it upside down, and flush it with dpf cleaner ( acid) then re hook it up and do a forced regeneration ...
Hi Aaron. Thanks for your video. I've got a red engine light on and the intake filter seems ok. What else could be the problem?
You need to read your EOBD codes, thanks for the great comments 👍🏻👍🏻🛠
Hi Michael. It is usually caused by the particulate filter. You need to remove the particulate filter itself before things go worse. I mean remove physically from the exhaust. Happened to me, I ignored it, then caused turbo damage, oil leak, and engine damage. I fixed everything now. Take it seriously dude
Thanks for this great video. Would this also cause the engine to completely shut down? My engine shuts down, then the Orange engine light comes on. I’ve taken it to Nissan about 4 times now and they can’t seem to find the problem. It’s really dangerous as it often does this randomly and without warning.... appreciate your help!
You don't normally get a full cut out with this fault, Thanks for the great comments👍🏻👍🏻🛠
Hi Aaron. I just carried out this fix today. Pipe was split in two same place. Put the new part in. Tightened it all up. Cleared the codes went for a 20-30 min drive in 3rd at high rpm doing 50ish mph. Light came back on read codes again. Getting P1525 - Air Bypass Valve System code? Any idea what this could mean?
Cleared it again just to see if it will reappear after a couple cycles. Any idea what that could be as I assumed dpf probably needed a regeneration after the split pipe.
sounds like you might need to clean the egr valve, and take for a good run to regenerate the dpf, Thanks for the great comments👍🏻👍🏻🛠
Hi I have a Nissan qashqai 2015 and it kicking you smoke when you spool the turbo also there is like a grinding noise when you spool the turbo and I right in saying the turbo has gone and how much of a pain is it to replace please and if you have a video on this that may help please let me know and thank you for you time and your videos keep you the good work
Possible the turbo has failed, i don’t have a video on that sorry, Thanks for the great comments👍🏻👍🏻🛠
Thanks very much great job
You are very welcome Thanks for the great comments👍🏻👍🏻🛠
Is the turbo pipe visable when u open the hood then? Having issues with mine. Black smoke coming from exhaust I find when I'm taking off or high revving and a slight dip in power. Air filter just been changed and egr valve checked. Dreading it being the turbo
if its the turbo you would normally get a noise as well. Thanks for the great comments👍🏻👍🏻🛠
Mine was air related but on the return from the intercooler to the throttle body. Taped that up temp' until I can source a new pipe. Split around the expanding mouth that fits over the connecting body pipe. (not a split along the pipe). Made a whistling sound at high revs/high pressure. Was also getting 'some' oil over the throttle body/surrounding area. Bought some silicone self-adhesive tape to do the job for now.
Thanks for the great comments👍🏻👍🏻🛠
Thank you very much for such a nice video appreciate it .
Yesterday i was driving my Nissan Qashqai 2008 suddenly the engine start kind of light noise and the engine and oil light turns on at the same time i drove the car around 80km to my house but the engine had no power after that noise in the morning i checked the engine oil the gage was completely dry i put some Engine oil around 5 litter to which shows the right gage and when i start the engine and drive the car was the same there's no Engine power hardly going to 80km/hr .
Could you please tell me about the problem I'll really appreciate it.
Thanks in advance
If you ran the car on extremely low oil there might be damage, you need to reset the engine codes and try again, using eobd reader, Thanks for the great comments👍🏻👍🏻🛠
Great video, changed this pipe. Does anyone know how to reset the warning light on the display?
you will need a eobd code reader like amzn.to/3azgvgc its really easy to reset, video here if needed ua-cam.com/video/FJMDuWnGMII/v-deo.html
Thanks for the great comments👍🏻👍🏻🛠
It really was helpful...thanks much
Thanks for the great comments👍🏻👍🏻🛠
Liking that kraken tape mate 👍
It is great on coolant hoses, turbo pipes etc for a short term fix👍🏻👍🏻
Same crack in the same place i had today. I order new plastic part £22 on Amazon Prime. Any ideeas why this happened? Also some oil was spill out everywhere. Is the engine oil right?
Yes a great price, the link is amzn.to/2GypIuw
if anyone else needs one Thanks for the great comments👍🏻👍🏻🛠
Cheers for the video. I had the same issue over the weekend. I used epoxy glue to seal it. I notice that there is a bit of a lag between 5th an 6th gear. Will deleting the red engine light reset this.
should do give it a go, Thanks for the great comments👍🏻👍🏻🛠
I have the same issue with 5th and 6th gear did you manage to find the problem
I have a question about something unrelated to your video. Can anyone kindly advise me on how to turn on park lights in a qashqai? There's no broken bulbs but when I put the control lever for park lights they don't work. Fuses are OK in the cabin so I am really desperate to get help.
Thanks
Which control lever are you moving, the indicator stalk?
Hi grate video do you know if a update mod was made
The new pipe looks the same, thanks for the great comments 👍🏻👍🏻🛠
Hi do you know where the temperature sensor is on a qashqai j11 please trying to clean the dpf
I believe its In the thermostat housing, Thanks for the great comments👍🏻👍🏻🛠
Thanks great video. Hopefully this is the problem with my 2012.
Fingers crossed! Thanks for the great comments👍🏻👍🏻🛠
Good video. This is what happened to mine
Thanks for the great comments👍🏻👍🏻🛠
Top man great video
Glad you enjoyed it Thanks for the great comments👍🏻👍🏻🛠
hi anton, our nissan qashqai broke down today on the road and that pipe as shown in the video was broken. the problem is that we drived in limp mode for a good time and then we heard some weird noice and now the engine goes on only for few seconds and then we hear some cranking noise and it shuts down. do you have any idea what could it be except the pipe? thank you
You most probably have blocked the DPF in the exhaust system which means the engine now cannot breathe and will fail to run
because the pipe was broken. The engine produces a lot more smoke through the exhaust and the diesel particular filter catches all the soot
You might need to get the DPF cleaned before the engine will run again. Thanks for the great comments👍🏻👍🏻🛠
Hi
Would you be able to make a video of Nissan qashqai turbo faults and how to change it and rebuild it
Thanks
I will look into it Ismael 😂 Thanks for the great comments👍🏻👍🏻🛠
hi great video and good tips 👍👍😊, im looking to buy a 2007 1.5dci nissan qashqai with 107k miles on it what do you thing , should i buy it or not , what you reccommend please?. thanks
take every car on its own merits, this might help, ua-cam.com/video/9acTyehwtsM/v-deo.html Thanks for the great comments👍🏻👍🏻🛠
Great video, its just gone on my dad's car £20 for a new one off amazon
Thanks for the great comments👍🏻👍🏻🛠
p00450bd trouble code for my Nissan. Do you have any idea what that could be ?
sounds like your evaporations control has a issue, this is the sensor and valve that allows fuel tank vapour to be burnt by the engine. you might have a split pipe Thanks for the great comments👍🏻👍🏻🛠
Had same issue,looked under hood and yep,cracked pipe. At least I know and can inform garage,cheers mate 👍
Thanks for the great comments👍🏻👍🏻🛠
You can change it yourself in 5 minutes mate
Where is the fuel cut off switch for these cars or is It done only by diagnostics only ???
Ecu controlled, 👍🏻👍🏻Thanks for watching 🚘👍🏻
Would you recommend the qashqai mk1? have you found it to be reliable?
They are ok 👍🏻 Thanks for the great comments👍🏻👍🏻🛠
Many thanks.
You are welcome!, Thanks for the great comments👍🏻👍🏻🛠
Perfect.. Ours has just given up the ghost 3hrs into a 4hr drive
hope you can sort it, Thanks for the great comments👍🏻👍🏻🛠
thanks this was exactly the same fault i had
Great stuff, hopefully you can fix it now 👍🏻👍🏻Thanks for watching 👍🏻
have ordered the part only about £30
Thank you for the great video keep up the great work
Having this problem but intermittent, only happens some times when I fill the tank from empty. Help please
Thanks for the great comments👍🏻👍🏻🛠
Hey, i know this is a long one but I have a Nissan Sylphy 2006, and it does have a problem with power. First off, i do experience a delayed driving force when i step on the gas especially when the engine is hot and not in motion. This happens more so when a high torque is needed for the vehicle to move either foward or backwards. For instance when i come to a complete stop and i have to go over a bump or ramp of some sort, stepping on the gas wont make it go over immediately as i will have to deeply accelerate for a few seconds..say 7 sec..for it to even start moving. Its movement will be extremely slow until it gains momentum and after which everything works as its supposed to. Whilst all these happens, the rev conter on the dash stays stationery and does not act as though there’s any acceleration at all up until the vehicle moves. It wont rev on neutral too and the ”R” for reverse wont show on the dash board as it goes blank when being reversed. My Mech had to change the throttle sensor, had its transmission control unit replaced and also checked the exhaust system for any leakages but no show. I have constantly stayed dirty on it, moving shop to shop but it seems to prove a headache for everybody. Any help/suggestions will be highly appreciated
Thanks for the great comments👍🏻👍🏻🛠
Hi Emmanuel,
Did you manage to fix this problem since then? I'm asking because I have similar issue on my Nissan Qashqai 1.2.
Hi,could u tell me what the tube on the left hand side off the engine is please.
that is also a turbo pipe, from the turbo the intercooler,Thanks for the great comments👍🏻👍🏻🛠
Thanks for the reply,Looks like I've got oil coming from the bottom off the pipe so not good.
Thanks for that info. i got a J10 year 2013 and currently having shakes while accelerating on 3rd gear. Can anyone helps?
Possibly the duel mass flywheel out of shape 😩👍🏻👍🏻
Is it petrol o gasoline? Because I had that problem on my juke 1.5 dci and it was an injector number 3
what the fuck are you talking about ?????????????????? @@aaanton11
I had this part break so I replaced the part, but the engine light is still on and i still have no power along with a hissing sound on the drivers side. Any clue what is the issue plz.
Sounds like you have a air leak on the turbo hoses still, are the intercooler hoses pressurised when you rev the engine 👍🏻👍🏻
@@aaanton11 the hoses seem to have pressure, I'm not very clued up on engines I take it this hose is the one that connects onto the metal tube that is around 3" wide and goes over the top where the oil dip stick is.goo.gl/images/o1eNrR this tube. As far as I can tell the hissing seems to be around the back of that nissan cover if that helps.
If it helps I had a friend come around who knows a bit about cars he said it seems the hissing noise is coming from the turbo, he does not think the turbo has gone as it's not smoking along with not losing coolant and there is not a noise like a whine coming from the turbo. My arse is falling out thinking it's a £1000 fix.
Hello, I got a 2008 Nissan Quasqai 2. The EML light is on, despite 3 trips to the mechanic for various tests, my engine does not look like the one in the video so I wondered of you had any advice. MOT due very soon and is going to fail due to the light. If I can get it turned off I am going to sell.
Does the light go out temporarily after the garage visit, if so you could buy a cheap eobd reader and turn off the light just before the mot, something like in this video, ua-cam.com/video/FJMDuWnGMII/v-deo.html Thanks for the great comments👍🏻👍🏻🛠
It stays off temporarily, one or two days. I’ll look into the eobd reader, thankyou
@@aaanton11, i got a code reader and it tells me P2453, the diesel particulate filter i think. This was changed, cleaned in May last year
This was exactly what I was experiencing had me worried once I popped the bonnet and removed Theo cover there was the crack and residue
Glad it helped! Thanks for the great comments👍🏻👍🏻🛠
Could you make a video how to fix ESP on Nissan Qashqai
I will look into it Thanks for the great comments👍🏻👍🏻🛠
Thanks, looks better than a new one now, mine has gone too,a ran the car for about 5 miles after I notice the split,and lost all power going up a hill even in first gear it wouldn't go,,I had some super glue and some tape,,but no joy, AA came out and towed me to the garage,15 errors came up, he said a need to get it on a computer!!! So annoying crap cars,
Thanks for the great comments👍🏻👍🏻🛠
Was black smoke included as well as limp mode??
Yes, Thanks for the great comments👍🏻👍🏻🛠
Just done mine, but the red light is still displayed on the dash, have you any idea why. Thanks.
You might need to clear the eobd codes, or carry out a dpf re-gen, Thanks for the great comments👍🏻👍🏻🛠
Hi just your video on fixing turbo pipe
Thanks for the great comments👍🏻👍🏻🛠
Thanks
Thanks for the great comments👍🏻👍🏻🛠
I have red engine light on ,on my nissan qashqai +2 2010...what would be the possible problem
you will need a code reader to pin point the issue, Thanks for the great comments👍🏻👍🏻🛠
I had this problem, I took it to the garage who put it on the diagnostic machine which said the air flow switch needed replacing , at the time I didn’t know that the turbo pipe had cracked .
They replaced the switch,all done very quickly, I went back and picked it up . £250 later , I wasn’t pleased especially after driving away and 5 minutes later the engine management light came on . I took it back where they told me the turbo tube had gone , I looked at it and knew it could be changed easily. The hole time I’m thinking I’ve just been screwed over by £250 . I came home and ordered one from eBay Wednesday at 17:30 , new part turned up at 10:15 Friday ,price £17:50 and free postage . It took less than 15 minutes to change .
I wish I’d known about this problem before taking it to the garage
Ask the garage for a refund on the work that didn't need doing, Thanks for the great comments👍🏻👍🏻🛠
Omg you have put my mind at ease.
Driving home and my car lost power of all days.
Christmas day with me and my little girl.
Rac had to tow me home.
But this is the exact problem they saw under the bonnet.
Wish I could sort it myself like everyone else but I'm not that good 😔
you could fix it, give it a try the new parts are cheap off the link in the description, if you struggle then take it to the garage. Thanks for the great comments👍🏻👍🏻🛠
I've had this exact fault I've changed the pipe and reset engine management light but the engine still runs flat I'm thinking the turbo might be damaged any suggestions would be appreciated? Thanks.
Might be the DPF filter restricted due to the broken pipe, try and drive at 70mph for 30 minutes to allow to regenerate, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 many thanks for the speedy reply I'll give it a go 👍
@@aaanton11 I did what you said about running it at 70mph on the motorway I felt the power coming back and now it's running better than I can remember! Thanks so much I'm so happy you've made my year! You're a star m8 👍👍👍👍👍👍👍👍👍
What is the actual part called? Just looking on Eurocar parts.
Link is in the description Thanks for the great comments👍🏻👍🏻🛠
My engine light ISN’T on but car seems like it’s on limp mode
Hardly any power, seems to get worse if you’re turning at the same time as accelerating (pulling out of a junction)
2nd gear seems to be the worst with Jittering for a couple of seconds.
Checked my Turbo pipe and yes it looks worn and as if the seal has gone, a little liquid underneath also.
Will have to try this fix
Sooner the better as the DPF will be filling with soot, Thanks for the great comments👍🏻👍🏻🛠
Hi i have the nv200 van having no turbo then eng management light comes on i turn it off and i have boost again when i turn it on could it be same problem ? thanks
its 1.5 diesel
Possible, or a split turbo hose, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 thanks for reply
We also go for nissan qashqai 16 dci?
Yes any model with the plastic pipes are prone to breaking, thanks for your comments 👍🏻👍🏻🚘
@@aaanton11 NO, the 1.6 doesn't have the same engine design and it does not use the same piping . This only affects the 1.5dci Renault engine .. 11 years nissan technician. your welcome
I changed the part. I now keep getting a p0242 code turbo boost sensor b circuit high sign. Any ideas how I can now resolve this? Thanks
Be sure the connections are all ok to the sensor, then use a code reader to delete the codes, it might settle down after a bit of use especially if the the pipe has been leaking for a while 👍🏻👍🏻
remove the system to function for the turbo filter , there is a cap that opens and closes .... make it always open , it gives way better performance and will solve your issue , because the cap is getting closed the turbo does not work properly and can damage up the car
How do I find this on a 2012 automatic.
Its in the same place, Thanks for the great comments👍🏻👍🏻🛠
I had the same problem. But after I replaced the part, now the engine no longer has the power it needed. What could it be?
If the car was driven with a broken hose it will have been smoking heavily and possibly will have blocked the diesel particular filter you will need to carry out a regeneration and hopefully that will cure the problem Thanks for the great comments👍🏻👍🏻🛠
Where can i order this part?
£22 on amazon amzn.to/3lqigkl Thanks for the great comments👍🏻👍🏻🛠
Hi, I've changed the pipe and had a friend plug the machine in to clear faults. Nothing showing up but still no power. What could this be?
Dpf filter blocked in the exhaust, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 what's the best and most cost effective way to get this unlocked? Thanks for the reply
brill wee video
Thanks for the great comments👍🏻👍🏻🛠
had same problem, and bought new part off amazon and fitted fine all seems fine but red light still on? should i be worried
i did have to drive back from Ashford to London with low power
I suspect the DPF will be full of soot, using a scamnner tool you will be able to reset and regenerate the DPF, Something like this ua-cam.com/video/1BC9P2naH4Y/v-deo.html Thanks for the great comments👍🏻👍🏻🛠
Hi just wondering if anyone could help driving today when red engine light came on also the yellow traction control and anti-skid lights came on engine sounded really rough and lost a lot of power anyone got any ideas?
Check the pipe like in the video, Thanks for the great comments👍🏻👍🏻🛠
It happend to me today what the part call
Air intake pipe thanks for watching 👍🏻👍🏻
Theks
Thanks for the great comments👍🏻👍🏻🛠
Did I have oil coming out of this part?
you will have slight oil in there, Thanks for the great comments👍🏻👍🏻🛠
Mine broke in a different area where the metal clip is oil on the engine and red engine light also had the traction light on
I've a 2011 J10 model and it's on its 4th pipe at this stage. First time around, Nissan fixed it and charged me two hundred quid. I soon found out that I could get this pipe online for 25 quid and have done the repair myself since. It's a stupid design flaw that Nissan should have addressed long ago.
very true, should be a recall, Thanks for the great comments👍🏻👍🏻🛠
Can anyone tell me why would i need dpf regeneration after fixing this pipe ? What happend if i dont do dpf regeneration after i fix it ?
the car will regenerate its self, if the light is still on after a good run it might need a forced regeneration with a diagnosis tool, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 also ELECTRON STABILITY CONTROL OFF WARNING LIGHT
And slip warning light both came on, i presume because my turbo pipe is broked. It will wanished after i replace the pipe i think..
Changed the part and cleared the codes, it's still in limp mode?? Any ideas?
Can't rev over 1.5k and its running like shit
Sounds like the DPF in the exhaust is blocked, Thanks for the great comments👍🏻👍🏻🛠
Quick fix on the go. Surprisingly cheap replacement part of AliExpress was casted out of one piece, nothing to snap apart of sensor 😄
Thanks for the great information👍🏻👍🏻🛠
@@aaanton11 unfortunately my P0299 gives me headache. Yesterday got red engine light, that part always spits bit of oil backwards. Now I don't know is it temporary cause i pushed car for longer at 100mph+ or i got dirty turbo. Dpf was once clogged and flushed by teraclean service years ago, probably 4-5. And my EML Bluetooth device reports damaged on phone, so I'm not sure if this is cause of not being able to reset that error. Going to shop today to get new OBDII and see if i can clear that error.
1.5, 1.6L DCI or do both use the same parts?
They both have intake pipes but its the plastic one that has the issue, Thanks for the great comments👍🏻👍🏻🛠
Is that the 1.5 or 1.6 dci?
Not sure, Thanks for the great comments👍🏻👍🏻🛠
was it a 2.0 or 1.5
Not sure, I think it was 1.5, Thanks for the great comments👍🏻👍🏻🛠
I replaced the pipe but i have power loss at 5th and 6th gear and the engine light didnt turn off what should i do ?
There is a possibility the dpf is partially blocked form the issued with the broken pipe, might need a forced regeneration, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 how i do that
Ти си ЦАР ♥️♥️♥️♥️♥️
Thanks for the great comments👍🏻👍🏻🛠
how to restart the screen from how i changed the auto part myself
don't you replace the boost pipe with something more stronger as a pose for a like to like pipe
the new ones are modified to stop a reoccurring issue, link is Link to new pipe on amazon £20 amzn.to/2GypIuw Thanks for the great comments👍🏻👍🏻🛠