GIANT 42" LED BAR INSTALL on 4x4 OFFROAD Suzuki Jimny

Поділитися
Вставка
  • Опубліковано 6 лют 2025
  • Welcome back , today i'm installing an OSRAM 42" led light bar on top of my suzuki jimny frontrunner roof rack. The light this led bar gives is crazy! Turns night into day.
    Thank you for watching!
    Make sure you subscribe and enable all notifications 🔔 so you don't miss a new video. Click here to subscribe : bit.ly/3etp8uF
    🚙 Watch more Suzuki Jimny here : bit.ly/3kXagcK
    🏍️ Watch more Ktm 1290 Super Adventure here : bit.ly/3nzkhP0
    🚗 Watch more Brabus 700 here :bit.ly/30P43su
    🏍️ Watch more Ktm 1290 Super Duke R Offroad : bit.ly/3qThz97
    Type LED : Osram ledbar 42" (FX1000-CB SM) Bought it at : 4x4deals.be/co...
    Frontrunner LED Light Cover :
    4x4deals.be/pr...
    4SKY Cable Tree
    4x4deals.be/co...
    Need Music in your videos like mine?
    Go check this out : share.epidemic... 👕 Smokey Webshop : bit.ly/3kDbflb

КОМЕНТАРІ • 81

  • @LifeofSmokey
    @LifeofSmokey  3 роки тому +15

    The camera ISO was on automatic , so the first seconds after the LED goes on is the real deal. After that the camera lowered the ISO , but that LED is 🔥🔥🔥

    • @green_life7
      @green_life7 2 роки тому

      Try stedi led lightbars from Australia. They are best bang for the buck

  • @callum5147
    @callum5147 3 роки тому +24

    Might need to adjust the light bar so its not facing the ground.

  • @08pileggi
    @08pileggi 3 роки тому +5

    When install light bars/pods I typically do about a 0-1 degree angle to have just a slight degree up to help with distance and coverage. To the people complaining ignore them, you set this up to how YOU need/like it. Rock on brother keep doing you. If you have questions hit me up I love talking about lights 😅😂

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому +2

      After i went for a first drive i immediately moved them up a lot 😁. Now i'm just turning the forrest into daylight 🙈

    • @08pileggi
      @08pileggi 3 роки тому +1

      @@LifeofSmokey that’s the only way to do it!!! Love it

  • @johnhudson1965
    @johnhudson1965 Рік тому +1

    Those light bars are superb, give about 500m of great floodlight, way more useful than spots, i had both on my ranger 4x4, the spots could shine for over a km but no flood like effect

  • @rogerh123
    @rogerh123 3 роки тому +1

    1:44 YO DAAWG! WE HEARD YOU LIKE A L.E.D. BAR, SO WE INSTALLED ONE IN THE ROOF OF YOUR HEAD! You have officially been PIMP’D!
    Nice installation!
    I recommend to wire it up so it turns on/off with the high-beam. And the nice new button makes it always off (Roof bar can get annoying in heavy rain/snow)
    It’s easy to connect with a H4 piggy back adapter, on the main lights. So there is no need to cut (or weld :) ) the original wires!
    You also need to adjust the angle of the bar a little bit upwards, for best uniform light down the road. :)

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому

      Thx m8! Adjusted it upwards last weekend. But i think it's to high now. It lights up the whole forest now 😂😅🙈

  • @magnuspersson414
    @magnuspersson414 3 роки тому +2

    Here in Sweden we connect our extralight relay signal in series with the headlight, so we don't blind meeting trafic

  • @krychulidki9424
    @krychulidki9424 3 роки тому +2

    Great and funny like always 👍😁💪. The lights are amazing. Good job 👏

  • @Thejoegert
    @Thejoegert 3 роки тому +1

    Nice upgrade! Love the cherrymoon classics in the background 🤪

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому +1

      Haha didn't know anyone would hear that. I found my old cd box from when i was 18 years old. That's euhm...19 years ago and listening to my old school cd's when i'm working 😅🙈

    • @Thejoegert
      @Thejoegert 3 роки тому +1

      Hahaha! 2 year age gap ( +2 for me) so i know what you mean. When i'm in the shop it mostly topradio....retro arena 🤣

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому +1

      @@Thejoegert Top Radio all the time in the Brabus cause i got DAB in that one. When i bought the Jimny it also had dab Top Radio but can't find it anymore 😂. Used to spend all my time at The Site Wuustwezel. These songs bring me back to a sketchy time 🙈

  • @redheadtv443
    @redheadtv443 5 місяців тому

    nice bro but how you did to make the bouton (switch ) stop uluminating all the tine

  • @MrChum1987
    @MrChum1987 3 роки тому +2

    Great video, now what about a solar panel on rails that sits under your roof rack and slides out when required!

  • @breaveheartDK
    @breaveheartDK 3 роки тому +1

    Nice smokey 👏👏

  • @TedBarrera
    @TedBarrera 7 місяців тому

    what wire did you use to run down the windshield?

  • @black_beardgoatteam4739
    @black_beardgoatteam4739 3 роки тому +1

    I love it !
    I from belgium and my jimny is coming in 2month 😬
    It could be fun to be able to meet a subscriber in Belgium
    Continue you re vidéo!
    Peace ! 👌🏻

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому

      So cool! And yeah we need to organize a meeting in Belgium don't worry haha

  • @82werk72
    @82werk72 Рік тому +1

    how did you attached the wire along the windscreen? :)

    • @LifeofSmokey
      @LifeofSmokey  Рік тому

      It's some kind of rectangular wire that fits in the small gap between the window and frame 😊

  • @wtr948
    @wtr948 3 роки тому +3

    No Italians were offended in the making of this video!

  • @_Ad_Ra_
    @_Ad_Ra_ 3 роки тому +2

    4:25 - RIP ears :)))

  • @BorisEkner
    @BorisEkner 3 роки тому +5

    Nice video - as always.
    The light bar should only turn on together with your original high beam.
    To do that you use the original high beam to trigger the relay for the light bar. Doing this gives you an attractive option.
    - If you connect earth wire of the light bar relay to your switch inside the car you can turn off the light bar (ie its earth wire) while continuing using your original high beam.
    (I think this is required in all of Europe.)

  • @raaaaaaaaaaahhhhh
    @raaaaaaaaaaahhhhh 3 роки тому +3

    need to aim it up a bit yeah?

  • @Max-vr5er
    @Max-vr5er 3 роки тому +1

    Hey, nice video! How did you remove the cover for the light switches? I am installing a light bar too and cant figure it out;)

  • @joseluismonarrez365
    @joseluismonarrez365 2 роки тому +1

    Hello how did you conect de cables to the swich that dont drain battery?

    • @LifeofSmokey
      @LifeofSmokey  2 роки тому

      I believe i took red and yellow together. Because when i first hooked it up the switch led was on all the so it was draining the battery. 😅

  • @qwasti76
    @qwasti76 3 роки тому +2

    Nice job, but i think the Osram is set a little bit to low from the angle. Give him a little push!

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому +1

      Yep noticed that driving last weekend 😁. Will do a video how it's setup now. First offroad vehicle. I have so many questions 😅

  • @pim1234
    @pim1234 2 роки тому

    PLz show the wiring also, how you connect it

  • @magnuspersson414
    @magnuspersson414 3 роки тому

    Good and fun vid!
    Have tried that new reflector tech. Not impressed.
    I went for oldschool osram pencils on a bent rig for my Jimny

  • @joe5260
    @joe5260 3 роки тому +1

    i see like you dont need this motorcycle anymore, send it to me please ^^ 😅😅😅😅

  • @Yeldarb13041975
    @Yeldarb13041975 9 місяців тому

    God Dang it… so no switch on high beam? That would be useful to know.

  • @pim1234
    @pim1234 3 роки тому +2

    The light in the button has to light up when the light bar is on....otherwise you don't know it is on... LOL

  • @dinamassurker1315
    @dinamassurker1315 3 роки тому +1

    When is the snorkel coming up?

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому +1

      Most likely after i blow my engine up because i had water inside 😅.

  • @zafranchai
    @zafranchai 3 роки тому +1

    what did you use for the back ?

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому

      Osram LEDriving Reversing LEDDL109-WD

  • @jeffreyr28
    @jeffreyr28 3 роки тому +1

    Die ledbar moet nog afgesteld worden schijnt net voor de jumny als die goed staat denk je echt van Goddamnit waar is mijn zonnebril 😅

  • @blendervideos4974
    @blendervideos4974 3 роки тому +2

    6:20 where you got these switches

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому +2

      AliExpres straight from China 😁

    • @manooel
      @manooel 2 роки тому +1

      @@LifeofSmokey can you share a link please ?

    • @LifeofSmokey
      @LifeofSmokey  2 роки тому

      @@manooel m.nl.aliexpress.com/item/1005002551462180.html?spm=a2g0n.orderlist-amp.item.1005002551462180&aff_trace_key=&aff_platform=msite&m_page_id=9581amp-oLF1WoNbRHr7-qtwwgnahg1646515956016&browser_id=2f94bec8e5ed491882d06d31a9714feb&is_c=Y

    • @blendervideos4974
      @blendervideos4974 2 роки тому

      @@LifeofSmokey i couldn’t connect the button with the wires how you connect them

    • @blendervideos4974
      @blendervideos4974 2 роки тому

      5 pin wires green yellow red black black
      On switch button

  • @MrPubsquash82
    @MrPubsquash82 3 роки тому +1

    Interested how the headlight adjust switch works. Can you send me a pic where it connects to? My 2020 didn't come with it. Or is it a halogen thing only?

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому

      You can even buy the switches on AliExpress , they are not stock but fit the jimny perfectly ;-)

    • @MrPubsquash82
      @MrPubsquash82 3 роки тому +1

      @@LifeofSmokey I mean the one that is stock on the left side. Like the mouse scroll button.

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому

      @@MrPubsquash82 oh yeah the little wheel. No idea where it connects to. When i got a heavy load in the trunk like this week for example (my big friend) my Jimny is blinding all upcoming traffic so i turned that little wheel down so light shine more to the ground 😂

    • @peterherkild3112
      @peterherkild3112 3 роки тому

      @@MrPubsquash82 What kind of headlight do you have

    • @MrPubsquash82
      @MrPubsquash82 3 роки тому

      @@peterherkild3112 LED

  • @Zing_zing420
    @Zing_zing420 3 роки тому +1

    God dang it!

  • @DansEscapades
    @DansEscapades 2 роки тому

    Cool video mate! How would I mount this onto my eclipse cross?

  • @yasiriqbal8696
    @yasiriqbal8696 3 роки тому +1

    next video should be on suspension upgrade

  • @davidkennedy5626
    @davidkennedy5626 3 роки тому +1

    Smokey, can you put up the kit used to hide the wiring down your windshield? Also, how did you run the wiring for the little LED. Great vid btw. Dave in Oz.

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому

      The kit/glue i used is Soudal Fixall , just a very strong glue that stays flexibel and easy to peel of if needed. The wiring from the back is running through my roofrack so you don't see them :-p

  • @pititoy
    @pititoy 3 роки тому +1

    👍

  • @BorisEkner
    @BorisEkner 3 роки тому +2

    The rear/reverse lights should only turn on when you engage reverse gear.
    Ie, you should use the original reverse light/current to trigger a relay for your extra reverse lights. They should not be able to turn on without going in reverse. Yet again, I think this is a European requirement.

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому +7

      Yeah my first thought was installing this together with the reverse lights. But imagine being in a busy parking lot at night and you need to reverse 😂🙈. Also made it like this for when a friend behind me gets stuck i can turn on the light without having the car running or in reverse. 😀

  • @КонстантинНикитин-н3о

    👏🏻👍🏻🤝

  • @pim1234
    @pim1234 3 роки тому +1

    the light has too shine way further from you car

  • @aris8332
    @aris8332 3 роки тому

    Ben je niet bang dat je op een gegeven moment te veel meuk installeert? Je sleurt die windvangende onderdelen mee op je dak. Telkens weer een paar kilo erbij en een hoger zwaartepunt. Al die opplakdingetjes in de auto maken het ook niet netter. Het is jouw project natuurlijk, maar persoonlijk zou ik kiezen voor prestatieverbetering en vooral niet die auto overengineren met uiteindelijk resultaat, meer weerstand, rammeltjes en geruis, verbruik toename en afname van prestaties.

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому

      Everything i install has it purpose , i need the roofrack , need the big batwing awning for camping videos and the sticky things in the interior are OEM Suzuki parts you could order on the first model 😁. A stock new Jimny has no storage on the inside besides 2 cup holders. That's why you see a lot of new Jimny's with many gizmo's inside. Also no windnoise of other vibrating stuff cause i only buy top notch materials. And the 100hp in low gearing has taken my Jimny through some really deep mud couple of times so no worries about performance. 😁
      And i drive a 700hp Brabus , the last thing i care about it fuel consumption 😅

    • @aris8332
      @aris8332 3 роки тому +1

      @@LifeofSmokey Thanks for your reaction. Necessity is the best argument at all times, I agree. Some time ago I figured a snorkel is maybe overdone is you wouldn’t cross deep waters, but as I understand it could also play a role to suck in cleaner air from a higher position if you throw up a lot of dirt in your engine compartment frequently. What is your opinion?

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому

      @@aris8332 I thought i wouldn't need a snorkel but going through deep water last week i think i'm gonna be sorry soon that i didn't 😂🙈.
      By the way , most things i do to my Jimny is for youtube. I don't need all the things i have. I just use google trends and make video where people are looking for. Been on UA-cam for 10 years. Normal doesn't cut it 😁

  • @Fnatixful
    @Fnatixful 2 роки тому

    what did u do specifically to have te switch only light up with the key switch

  • @ivicafrancetic9838
    @ivicafrancetic9838 3 роки тому

    👍