You talked about switching out the brake/clutch levers & I would really like to see a video when you do that! Pinched my pinky under the clutch lever yesterday, agh.
High ended my grom going over the top of a hill. everything is pretty much still stock on it and i ended up bending the handle bars and breaking off the foot peg as well as a couple other minor things so I'm taking the time to fix and upgrade everything
Love the channel man but I have a question. I run the same bars and I can’t fix the throttle sticking when the bars are full turned to the right. Did you ever figure that one out? I’ve ran the cables in different ways and I’m starting to think I have to buy longer cables lol
Hey man I recently installed the pro tapers on the Grom but I can't figure out how to install the bar end mirrors ?! I know u have a vid for the stock but what do I do with the pro tapers ?
BLOCKHEAD that’s why I’m giving the XR50 protapers a shot... got the minis on my Grom now but want to see if the taller Xr50 bars are better for wheelies than the Honda mini bars .
Risers are like £20 universel risers i have then ive went from renthless that are same dementions as klx110 to cr50s for more hight just we bit guted for width wise lose abit on each side i like the wider bars but the key thing is pain in ass and the hight i would like more so hopefully i like the riding style of them just waiting on grips lol 😂
I got some new forks coming in and I'll need bar risers for the preload adjusters to fit, I'm looking into new bars would these be too tall with the bar risers do you think?
And i feel alot more leaned over more towards the front with my old bars and cant put legs under like that ether lol now can so hope iam giong love them think i will iam 5.9 myself so bit more upfront hight sounds and will prob feel alot better 🤙🤙love you vids bro 😎
Hey Block, My gf and I run the same bars on our groms. I have horn and signal switch mounted under the crossbar pad and brake lever i bent down just a wee bit to tell a difference (I see this is the give-away bike). Would like to come over to Orlando and ride with ya guys sometime! Or come to tampa!
Love those bars. I put KLX110 bars but too low. I put on Pro Taper Mini CR High bend but still too low. Is there room for a phone mount on the bar? I was trying to see in video but could not tell for sure. Thanks for the video.
Thanks for pointing out the clutch controls fit on the bend. My cheap rizoma bars do the same thing. Not too happy with it, I wish it was more length on the grip section. I need a flat seat too.
Any cable modifications?
looking forward to the mimi upgrade .
awsome vlog !!
You talked about switching out the brake/clutch levers & I would really like to see a video when you do that! Pinched my pinky under the clutch lever yesterday, agh.
Coming soon! Aug 29th 👍
BLOCKHEAD Cool 😎
Anyone know of a taller bar ,are ATV bars are high(✊🌝🤙),,,i run rxt risers AND crf50's but im 6'3 and it aint doin it..
High ended my grom going over the top of a hill. everything is pretty much still stock on it and i ended up bending the handle bars and breaking off the foot peg as well as a couple other minor things so I'm taking the time to fix and upgrade everything
Love the channel man but I have a question. I run the same bars and I can’t fix the throttle sticking when the bars are full turned to the right. Did you ever figure that one out? I’ve ran the cables in different ways and I’m starting to think I have to buy longer cables lol
See you dropping the bike in the future? You already have!
Out of chronological order, haha
My clamshells are right on that bend before the grip. Same bars.
BLOCKHEAD I'am 6 foot 2 do you think i can ride a Honda Grom comfortably or do you think I'am to tall for it??
I’m 6’1” and I fit just fine. It’s actually quite comfortable.
I'm just worried about my knees. But on the Z125.
My buddy is 6"2 and long legged and he was sitting on a grom yesterday trying to convince my to buy one too
sickser66 okey dude thx
there's no such thing as being too big or too small to ride a bike :)
With my Grom I had the Honda Mini bars with risers but I think I would have been better off with the XR50 bar.
Hey man I recently installed the pro tapers on the Grom but I can't figure out how to install the bar end mirrors ?! I know u have a vid for the stock but what do I do with the pro tapers ?
Did you ever get it on ?
Where do you get the custom bar pad cover?
wayy late but they come with the bars
what about the Protaper SE honda mini bars?
I've got those on the Giveaway Grom that we're giving away beginning of next month. They feel good! But a little low for my personal preference.
BLOCKHEAD that’s why I’m giving the XR50 protapers a shot... got the minis on my Grom now but want to see if the taller Xr50 bars are better for wheelies than the Honda mini bars .
ml
Risers are like £20 universel risers i have then ive went from renthless that are same dementions as klx110 to cr50s for more hight just we bit guted for width wise lose abit on each side i like the wider bars but the key thing is pain in ass and the hight i would like more so hopefully i like the riding style of them just waiting on grips lol 😂
Pro taper handlebars
12bar/Tail protector
And the engine sub cage
Was the best investment for my Grom
Almost at 100k now 🙌🏼
Did you need a long clutch cable?
how is vibration on the bar? Thank
Hi again. Also. Sorry. Looking for a flatter seat for 2019 model. Any idea ? Cheers. Ewan in Scotland 🏴
Hi. I’m looking for slightly higher bars than stock. Mine is 2019. Are yours higher. ? Cheers. Ewan from Scotland 🏴
I got some new forks coming in and I'll need bar risers for the preload adjusters to fit, I'm looking into new bars would these be too tall with the bar risers do you think?
Where did you get the custom foam cover done?
And i feel alot more leaned over more towards the front with my old bars and cant put legs under like that ether lol now can so hope iam giong love them think i will iam 5.9 myself so bit more upfront hight sounds and will prob feel alot better 🤙🤙love you vids bro 😎
What bar end mirrors are those?
amzn.to/2L58odd
Love ❤️ the vides keep it up
Thank you!
BLOCKHEAD no thank u
BLOCKHEAD u the 1 making the content
What’s the bend on them ?
Hey Block, My gf and I run the same bars on our groms. I have horn and signal switch mounted under the crossbar pad and brake lever i bent down just a wee bit to tell a difference (I see this is the give-away bike). Would like to come over to Orlando and ride with ya guys sometime! Or come to tampa!
Will def have to come to Tampa sometime soon! Under the crossbar pad for those would be crazy, I wouldn't be able to get used to it, haha
Hi Blockhead I have a question how fast can a grom rides in km/h?
About 96km/h
They look sweet
10:11 RED LIGHT!! RED LIGHT!!!
Love those bars. I put KLX110 bars but too low. I put on Pro Taper Mini CR High bend but still too low. Is there room for a phone mount on the bar? I was trying to see in video but could not tell for sure. Thanks for the video.
I used the ram mount clutch adapter to mount my cell phone. Like the one here - amzn.to/2w9kBYQ
I found a 1995 vulcan 750 with only 12,000 miles on it for $1000. Is that a good deal? It will be my first bike.
No
First #patron
Respek!
Harley calls it wrinkle black
Two fingers teguila
Hi 1st
James Murphy and u didn’t like, shame on you!
ed3tun yes I did and what does it matter to u
Thanks for pointing out the clutch controls fit on the bend. My cheap rizoma bars do the same thing. Not too happy with it, I wish it was more length on the grip section. I need a flat seat too.