My 2022 Grom in Candy Blue should be coming in any time now. I can't wait. I have a ton of parts that have already come in, just waiting on the bike now.
I know it’s a little lat but hairspray really helps on grip installs. Lube the piss out of the grips with the spray then slide them right on! Wait about and hour and the spray sets and locks the grips right in place!! Great upgrades already boss!
Love the new series!!! Super stoked to see this all built out. Recently got myself a mini bike and my very first bikes. Eager to see what all you do! Keep on keeping on!
So stoked for this series. I actually just did an install on the pro taper bars on my CRF250L - they're honestly a must have. Hyped to see the van setup you get with this grom!💪 💪
I think if you remove the center foam part of the handle bars you’ll be able to access the key hole easier and probably be able to see the screen again
Hi Talon, cool bike! You might want to consider investing in a magnetic parts tray. It’ll save you the hassle of losing the small nuts, bolts and screws.
just grabbed a 2019 and already loving the videos. there are so many fun things to do with these. Can't wait to make it "unuque" really wish there was a cafe style kit
Nice! I'd love to see a dualsport or scrambler build with dirt tires and that front round LED headlight.. I've seen a picture of one and it looks sick! I'm thinking they had 3 offroad type GROM builds. Scrambler, dualsport and Adventure.. Great job on the bars! You are living my dream lifestyle man.. Camper van, garage full of all the toys I want, with exception of the Polaris sxs.. I'd go a different route, but that's alright.. haha.. Way different terrain from where I live I'm guessing.. Over powered for our trails..
#1 Nice garage! Besides a “basement man cave” a mans garage is another place of solace! 🥰 #2 Nice gear (Grom 🏍/Rukus 🛵/Polaris/3 🚲’s/ Onewheel? 🛹 (good choices)! #3 Nice tattoos dude! The colors on your sleeves POP! 💪🏾💪🏾 #4 Couldn’t they’ve just make the crossbar separate w/out the need of installing a whole new handlebar? 🤔
Just dropping my two cents: Thank you for the tip on the tape, extremely helpful. I opted for a set of protaper 1 1/8, CR high rise. IMO they’re too wide for my preference. I’m prolly going to buy both the Honda minis, and then the klx and see which ones I prefer. When I mocked everything, my hole placement seemed to be pretty good, but after all is said and done, I’m just too particular to accept where I done drilled it. Lol. I also went with the motion pro quick twist throttle, but had a bitch of a time reconnecting the ferrule ends. I took care not to mar them up with pliers, but none the less, It feels ‘off’. Maybe it’s just psychosomatic.
I have the Honda Minis on my 2020 Grom and I think they fit perfect. I also have some 1” bar risers to bring em up a little bit. You made the bar install seem like a breeze. Stoked ton watch your build series
Great video man. I will be new to this. Is the bike auto!?. I tried gear back in the day 😆 🤣 but couldn't get it right. Lol. So this were I'm at in the moment. Thanks
Looks real nice and super clean. Got me excited to go down stairs and look at our new grom we just picked up but forgot its dead stock and immediately almost threw up 🤢🤮 at first sight.
For what purpose(s) did you replace the handlebar? Please provide a list of the specific products used and their sources. (Most "creators" put that in the "Show more" section) Thank you!
Dude love this definitely will do this or have some one do it me and small tools don’t agree but can I get a list of what parts you put on it thanks brother looks awesome already
I have suggested this over the yrs to others but no one can see it maybe I’m just crazy but if u replace the front fender with the monkey fender and keep it up high like the monkey the grom will look like a dirt bike. But maybe it’s too hard to do idk
Any links you can add with info on what you added would be appreciated. I am getting ready to upgrade my girls grom. You have a new subscriber never the less
I don't understand how people can buy egly thinks like those mirrors, the OEM ones are so beautiful and you can see much better because of the angle, and those aftermarket ugly ones , they are even not protected, you gonna bust them on every corner
Is there a Grom sized bike that has a 150cc motor and will take grom attachments? I am a big guy (250) and will be taking short stints on the highway (65 - 70mph) down in the Ozarks (hills). I want to customize my bike too and just wanted to know if there are Grom parts to fit. Planning on removing the airbox...adding air filter. Swapping the exhaust for a nice dual high setup. replace the tail light and turn signals for integrated brakight/turn signal/license plate unit mounted on a stunt bar system. Not sure what else I will be doing but might go for a bigger better looking speedo. Any suggestions?
Anyone know of any specific channel that has a full in-depth review of a 2023 grom? I’ve seen a couple but I’d like to get different views on the bike and there dosnt seem to be much out there.
hi, have you adjust the throttle cable? because I install the same handle bar with protaper pillow top throttle tube, but the throttle tube will get stuck when bike turn right while turn left is normal.
Stupid question. I’m going to do the pro taper bar swap but if I choose not to change out the throttle and grips, do they slide off and back on as one piece?
Can I install that same mirror on the stick end Handel since it is not a perfect cylinder shape? It kinda has a bit of a narrow shape from inside to outside.
I have a 2018 grom. I went on a 150 mile ride this past weekend WOT most of the time . I get back home check oil. And was low on oil. Thinking it's burning it. Any issues with your grom like that.
My 2022 Grom in Candy Blue should be coming in any time now. I can't wait. I have a ton of parts that have already come in, just waiting on the bike now.
how's it going so far?
I know it’s a little lat but hairspray really helps on grip installs. Lube the piss out of the grips with the spray then slide them right on! Wait about and hour and the spray sets and locks the grips right in place!! Great upgrades already boss!
Air compressor is infinitely more entertaining though lmao
Stoked to see what the SATGrom will become, not stoked that it's making me want one more and more.
Wat died SAT stand for
@@ilovekrayonz Stuff and Things
This helped me so much. I didn't know about the holes needing to be drilled and couldn't get my switches to close up without gaps. Thanks!
Love the new series!!! Super stoked to see this all built out. Recently got myself a mini bike and my very first bikes. Eager to see what all you do! Keep on keeping on!
Just recently got my 22 grom and I haven’t found someone on YT who’s doing what you’re doing so I’m glad I found your channel!
Welcome to the channel
Looks awesome. I will be throwing some new bars on my 23 Grom this weekend! Thanks for the heads up on the drilling!
So stoked for this series. I actually just did an install on the pro taper bars on my CRF250L - they're honestly a must have. Hyped to see the van setup you get with this grom!💪 💪
Damn bro got everything black on black on black lol that mat finish on the honda grom is dope bro
I think if you remove the center foam part of the handle bars you’ll be able to access the key hole easier and probably be able to see the screen again
It doesn’t block the screen or the key if you position it correctly
Hi Talon, cool bike! You might want to consider investing in a magnetic parts tray. It’ll save you the hassle of losing the small nuts, bolts and screws.
just grabbed a 2019 and already loving the videos. there are so many fun things to do with these. Can't wait to make it "unuque" really wish there was a cafe style kit
Excited to see if you paint or wrap it. Can't wait. Keep it up! The mods are great.
Just ordered mine . I get it Friday pretty stoked
Nice! I'd love to see a dualsport or scrambler build with dirt tires and that front round LED headlight.. I've seen a picture of one and it looks sick! I'm thinking they had 3 offroad type GROM builds. Scrambler, dualsport and Adventure.. Great job on the bars! You are living my dream lifestyle man.. Camper van, garage full of all the toys I want, with exception of the Polaris sxs.. I'd go a different route, but that's alright.. haha.. Way different terrain from where I live I'm guessing.. Over powered for our trails..
#1 Nice garage! Besides a “basement man cave” a mans garage is another place of solace! 🥰
#2 Nice gear (Grom 🏍/Rukus 🛵/Polaris/3 🚲’s/ Onewheel? 🛹 (good choices)!
#3 Nice tattoos dude! The colors on your sleeves POP! 💪🏾💪🏾
#4 Couldn’t they’ve just make the crossbar separate w/out the need of installing a whole new handlebar? 🤔
Just dropping my two cents:
Thank you for the tip on the tape, extremely helpful.
I opted for a set of protaper 1 1/8, CR high rise. IMO they’re too wide for my preference. I’m prolly going to buy both the Honda minis, and then the klx and see which ones I prefer. When I mocked everything, my hole placement seemed to be pretty good, but after all is said and done, I’m just too particular to accept where I done drilled it. Lol.
I also went with the motion pro quick twist throttle, but had a bitch of a time reconnecting the ferrule ends. I took care not to mar them up with pliers, but none the less, It feels ‘off’. Maybe it’s just psychosomatic.
The xr50 bars are my favorite.
Love the rukus onthe back bro!
I have the Honda Minis on my 2020 Grom and I think they fit perfect. I also have some 1” bar risers to bring em up a little bit. You made the bar install seem like a breeze. Stoked ton watch your build series
Did you have to screw around with the cables or anything because of the 1 inch risers ?
I WATCH ALL YOUR GUN VIDEOS. MDIDNT KNOW YOU HAD A GROM. I JUST GOT A 2022 GROM IN BLACK AND DID THE REAR FENDER DELETE AND BAR MIRRORS SO FAR
Diggn the mod videos! Lol @ "make sure u drop ur screws all over the ground" 🤣. Seems like a pro tip we can all attest to.
I love the content of the grom
Awesome!!! The new garage and house sneak pics on Instagram too! The knobbies in the background for the grom or ruckus? 😀
Great video man. I will be new to this. Is the bike auto!?. I tried gear back in the day 😆 🤣 but couldn't get it right. Lol. So this were I'm at in the moment. Thanks
I’m digging the bar swap on the SATgrom! Looking forward to see what other goodies you got coming for it.
I really like your gages in your ears they look great on you. Amazing bike btw!
This was so helpful you have no idea
Glad it helped!
Looks real nice and super clean. Got me excited to go down stairs and look at our new grom we just picked up but forgot its dead stock and immediately almost threw up 🤢🤮 at first sight.
Heat gun helps for stickies too. Like your videos. Thanks
Do you have a link to these Honda Mini bars? I’m a little confused there seems to be so many pro taper bars. Thanks
Very niceeeeee ! Simply clean !
For what purpose(s) did you replace the handlebar?
Please provide a list of the specific products used and their sources. (Most "creators" put that in the "Show more" section)
Thank you!
Shii man grom Looking 🔥
Dude love this definitely will do this or have some one do it me and small tools don’t agree but can I get a list of what parts you put on it thanks brother looks awesome already
OK just purchased my new 2022 Grom today 😀 Can you post links to the products or am I missing something? thanks
Thanks for sharing this cool video!
I have suggested this over the yrs to others but no one can see it maybe I’m just crazy but if u replace the front fender with the monkey fender and keep it up high like the monkey the grom will look like a dirt bike. But maybe it’s too hard to do idk
Do you not remove the bracket from the left side of the bike for the reflectors? It looks like it should have a bolt in it
Did you bar end mirrors just slip on? Mine won’t go on the hole is to small?
Any links you can add with info on what you added would be appreciated. I am getting ready to upgrade my girls grom. You have a new subscriber never the less
Check my website under the garage tab
Leave the mirror mounts to put a RAM ball in the spot for PHONE OR gopro.
The mods are great!
Is there enough room to slide each grip over more for bar end mirrors? Mine are clamp style that attach at the end of the bars next to the grips
I don't understand how people can buy egly thinks like those mirrors, the OEM ones are so beautiful and you can see much better because of the angle, and those aftermarket ugly ones , they are even not protected, you gonna bust them on every corner
Looking forward to what is to come ... love the bike content ....
Hello...Where did you source the quick throttle? I have been searching, but i cannot find one.
Just picked up my 2022, what is the name of the rear turn signal relocation setup and LED lights?
Does that crossbar pad block your view of the instrument panel? Also, would those bars hit the KNEES of a six foot rider?
Is there a Grom sized bike that has a 150cc motor and will take grom attachments? I am a big guy (250) and will be taking short stints on the highway (65 - 70mph) down in the Ozarks (hills). I want to customize my bike too and just wanted to know if there are Grom parts to fit. Planning on removing the airbox...adding air filter. Swapping the exhaust for a nice dual high setup. replace the tail light and turn signals for integrated brakight/turn signal/license plate unit mounted on a stunt bar system. Not sure what else I will be doing but might go for a bigger better looking speedo. Any suggestions?
it is posible to stretch and lower the honda grom 2022? i need answer please thank you.
Looks great!
What’s the name of those cheap Amazon bar in mirrors? Thx in advance
You didn’t have to re route the clutch cable or anything?
Is the bar higher or wider…does the original wires long enough?
Anyone know of any specific channel that has a full in-depth review of a 2023 grom? I’ve seen a couple but I’d like to get different views on the bike and there dosnt seem to be much out there.
Awwww thats a cute bike
A SEI production sticker would add 10hp as well
Might drop a sticker pack sometime soon 👀
does the chimera actually add around 10HP to the grom?
Mini Moto Squad!
hi, have you adjust the throttle cable? because I install the same handle bar with protaper pillow top throttle tube, but the throttle tube will get stuck when bike turn right while turn left is normal.
can you please link me to the ram mount you are using? thank you
Stupid question. I’m going to do the pro taper bar swap but if I choose not to change out the throttle and grips, do they slide off and back on as one piece?
Thanks brother!
I'm a few days late on the watch, but that was a damn cool video, as always.
Thanks Nicholas
can I have your other mirror for my Grom since you only used one??
Can I install that same mirror on the stick end Handel since it is not a perfect cylinder shape? It kinda has a bit of a narrow shape from inside to outside.
I'm in love dude I want one soo bad now!
too bad they didnt do a layway i desparatley need a GRoM GOOd aZz Review brO it looks sick now
Wait what’s the hole point of drilling the hole again ?
These bikes are very cool. If I could only afford one lol.
Nice BUT, the pro Taper tubing blocks the instrument cluster.....Daaaaa
It might look like it on video but from the riding position it doesnt.
Is there a chargeport on it so you can charge your phone while you drive? Or will you be mounting one?
I have a 2018 grom. I went on a 150 mile ride this past weekend WOT most of the time . I get back home check oil. And was low on oil. Thinking it's burning it. Any issues with your grom like that.
No links in description?
hey talon will you be doing any more video's on your kawasaki ninja and adding custom parts to it
Yea just posted a ninja video on Patreon. It might go live to the public next week.
Already added like 12Hp to the grom 🤙🏼
Oh yeah cool stuff man want me a grom too haha now ...
Just bought the black one paid 5k new psh
I need this hat in black & white
Thinking abput putting those mirrors on my Vitpilen. Does anyone know their name?
what mirrors did you use i know you said crg but what model?
Do you need your reflectors.
DO THE FREE AIRBOX MOD AND EJK FUEL CONTROLLER SAVE SOME MONEY😉
Where do you get the throttle tube?
We get gold forks in Australia
If I have never worked on a bike, will a motorcycle dealership install a new throttle tube for me?
Yes, but you could DIY in under an hour easily
Got one today 😂
Can wait for a motovlog #dopestvloginthegame
Link to that exact mirror?
SatGrom is dope af. Just wondering what advantages it had over something like your old drz. Is it just size?
Size, gas mileage etc. they are both great bikes and have a lot of similarities
Wheelies!!!! Lol ☻
@DURALAST @AutoZone, sponsor Talon’s tool chest!
Quedo vacana gringo!
could a turbo be done... ?
doesn't the foam thing on the new handlebars obstruct your view of the speedometer?
Nope, you can see the whole speedo just over the top
The hat you’re wearing in the video. Is that going to be available in your sei store at some point. Couldn’t find it today.
Nope that was an old release, there is a new cooler one coming next week!
Did you need to re-route any cables to get extra length out of them? The SF needed a lot of things re-routed to work.
No rerouting necessary
Legend!
Hey mate, what is the actual model on the Pro Taper? There are a lot of different sizes available. Thanks
www.seiproductions.com/seigarage
Yea what he said... lol I'd like to know how your liking those bars and what's the model #?
Nice !
WHAT THE CHIMERA QUICK TWIST LINK?? i can’t find it and i need it hahah
Linked on my website under the garage tab
@@TalonSei Thank you haha such a quick response too! you’re a life saver man!