BEST GROM HANDLEBAR SETUP 2018! | HOW-TO | Install & Review
Вставка
- Опубліковано 22 сер 2024
- In today's episode, we put together what I think is the best handlebar setup out there for the infamous Honda Grom. Follow along with me as I install a set of ProTaper KLX110 handlebars paired with a set of 2" fully adjustable ROX risers and to top it all off one of the best phone mounts I have seen. Lots of good juicy content to enjoy. ~Links For Products Below!~
Pro Taper SE Handlebars amzn.to/2wKSQsz
Rox 2" Risers amzn.to/2wKTbeP
Pro Taper Grips amzn.to/2ILAAo3
Phone Mount amzn.to/2JQxLPl
Production Equipment:
helmet camera amzn.to/2wHeD2R
mount amzn.to/2eM16Rm
mic & adapter amzn.to/2eHy1TJ
dual sport helmet amzn.to/2vMFjjH
main camera amzn.to/2xsHv0c
shotgun mic amzn.to/2wVVrhK
If you use the amzn.to links to buy something, I get a small commission, the support means the world!
Those who made it this far thank you for watching!
Follow me on Instagram
/ atdfct
Subscribe for more!
Music:
Say Good Night by Joakim Karud / joakimkarud
Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0
creativecommons....
Music provided by Audio Library • Video
Myspace by kimengumi / kimengumi
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons....
Music provided by Audio Library • Myspace - kimengumi (N...
UPDATE: I am no longer running the risers, they moved around too much for my style of riding (wheelies, stoppies, etc.) Also you DO NOT need to re-route the cables if you are just changing handlebars. Thank you all for the support!
Attention Deficit thanks for the heads up man, that cable rerouting looked like the worst part of the job. Really want the protapers, that almost scared me off if the risers were necessary
Attention Deficit was it your risers moving? Or was it the soft rubber clamp bushings moving? I used protaper bars and thought my clamps where loose when stopping hard, come to find out it was not the bars being loose. Replaced with MNNTHBX aluminum bushings and it’s solid 🤟
I'm 6'4" as well, have you gone with a different set of risers? Or did you just go with the SE protapers with no risers?
Finally got around to switching bars and this video was heaven! Thanks for all you do and keep it up! You 2 are awesome.
I had that mount and it snapped. Found my phone getting ran over by cars, but luckily nothing happened to my phone . Use a ram mount now
.
Allen key socket set my man !
I appreciate these in depth install videos, really gonna help noobies like me when I finally get a grom.
Grayson Hardy Plenty more to come! Thanks for watching and thanks for the support!
Same I am thinking about getting a grom for my first vehicle.
@@hacim7100 did you get a grom?
just wanna say i love all your videos and cant wait to see more of them! My wife works on air compressors and they have a lot of odd sized allen bolts. try getting a set of allens sockets and you'll never look back. great for if you get a harley in the future too lol.
YOU JUST SAVED MY LIFE. I ALMOST STRIPPED THE HANDLE BAR ENDS
T-Animations WELL I AM GLAD I COULD HELP!
I have a 6mm 3/8 in ratchet Allen head that broke them loose easy
+The Gromster That would have been a lot easier. Thanks for watching!
The Gromster werd!
I’m 41 and I ride a cruiser ... damn I gotta get a Grom ! I love Honda’s .. Great vids !!
I love the hand behind the drill thing.......could have been a even more exiting video in a second....LOL
Send it.
Best way for stuck Allen bolts man is using the Allen key socket on a 1/2" ratchet or breaker bar
I think you are the 100th person to tell me that😅 Thanks for watching!
Did this to mine a long time ago, just enjoy your videos! My stock bar ends were stubborn as hell. One came out with a philips and a impact drive the other striped, had to just squeeze the whole bar end with channel locks and twist it off. Thankfully didn't have to drill them.
I really like the way you said I’m not going to say something about something I haven’t used myself.
I'm not sponsored by any of these companies and I don't want to sell you crap, honesty is key! I don't use the risers anymore they didn't work for my riding style unfortunately. Thanks for watching!
You're going to get big soon. Your vid's are top quality, it is just a matter of time. Keep doing what you're doing.
Thank you! That means a lot, plenty of content to come. Thanks for the support!
for those Allen bolts.. I would have tried a allen head socket and if it was too tough. I would have went with a 3/8" to 1/2" adapter and put a 1/2" ratchet to it. But you right.. always good to use high quality allen wrenches or sockets so nothing strips. Awesome video btw.
I actually have a set just didn't think to use it! Thanks for watching!
Great info! I am going to do the job exactly like you did. You don't know how much you helped me with cable rerouting explanation. By the way, taking handlebars off was easy for me. I just used my ratchet and allen bit. With the leverage of ratchet, the job was no sweat.
I'm glad I helped! I actually have a set I just didn't think to use them for some reason. Thanks for the support!
Changing my bars will be the second thing I do, the fender eliminator being the first. Thanks for the video it's very detailed and informative.
I know this is a few years old but I guess people hadn't known since it seems to be recurring theme, they actually make a 3/8 drive Allen key set you can get from harbor freight, from size 3-8 I believe. That's how I did my buddies and I plan to do on my grandma I just picked up
Woah. From 500 subscribers 2 years ago to almost 39k now. You just gained another 🙌
Much appreciated🙏🏻
Great video! I've always wanted to see what a grom with some pro tapers on it would look like. You should invest in a hex head socket set. You can get them in 3/8" or 1/2" drive. I rarely use allen keys anymore. Would have made that handlebar removal a piece of cake.
+Kyle Hiebert Thanks! I love them so far, I actually have a set just ended up doing it the hard way. Thanks for watching!
I didn’t drill a hole I just chopped the piece off and put come electrical tape around the bar and put the electric start on top ik a little dumb but it works and it’s in a cheap Chinese quad
Go pro test ride afterwards would be next level! Awesome job man 👍🏻
Yeah I wish I would have done a motovlog with this setup, thanks for watching!
These build vids are the shit dude, I'll def be tuning in for more...I'm going to pick up my new 2017 Grom today, same color as yours.
caley moore Thank you! I really appreciate that, and nice choice you will love it. Be safe out there!
Hi i just wanted to say that you inspired me to start collecting money for a Honda Grom.(im 12 btw)❤
That's an awesome goal and great first motorcycle!
You can use an impact driver on bolts held in by any sort of thread locker. Just make sure you don't use the impact driver to tighten it because you're rip the head of most bolts with one of those or break the part you're driving the bolt into.
You are the 100th person to tell me that. It was 4 in the morning lol my brain wasn't functioning properly.
You can buy Allen sockets stanley 10 bucks 3/4 size can get them at most Wal-Marts or Home Depot right tool makes the job way easier
Man that set up is KILLER! Thank you so much for this video brother. Ride safe
I usually use Allen head bits on a ratchet, for the stubborn ones.
Also, I saw in another vid, a good way to line the switch housing holes up was too fit the new grips on, wrap a width of duct tape around where the housing goes, maybe 3 or so layers tall, press fit the housing on, hard enough to make an indent. The tape should hold the pilot bit in place enough when drilling the pilot hole. Then just retap it.
A set of 3/8" drive allen wrenches and a long handled ratchet are really handy.
I actually have a set! Don't know why I didn't think to use them. Thanks though!
I have contour mini high bars on my 2017 grom with protaper risers and I love them and work perfectly for me and I’m 6’4
Nice!
If you get a rag wrap it around the bar ends and get yourself a vice grip and it’ll take them right off! Bart from TST industries take them off like that ...
Good idea!
Would I need to adjust the cable's if I'm using the stock clamp's? I know these are like 2 inches wider on each end compared to the stock bars. Great videos man keep um coming!
kauaigrown No you would not have to adjust length with stock clamps. Thanks!!
I also just bought that phone mount with the link you put in the description, hope it helps out with the build!
caley moore Thanks for the support! I am loving it so far, no complaints at all.
Get yourself a set of 3/4" hex head sockets. Way more leverage. You can always use them with a breaker bar with them as well.
+Brandon LHeureux I actually have a set just didn't think to use them lol. I was too excited to get these done. Thanks for watching!
A set of metric allen sockets and a ratchet will give you all the leverage you need. They will be very useful for all your bike mods.
Thank you! You are like the 100th person to say that on here😂 I actually have a set just wasn't thinking when I was filming this. Thanks for watching!
hex bit socket with ratchet or regular allen key w/ cheater bar tube extension around the long end for more torque
I’m getting a grom Friday I can’t wait so excited 😆 and your videos are really good thanks 👍
NIce that's awesome! and thank you!
Attention Deficit your welcome 🙏
Right when you said "Put some ass into it" I had to like the video haha🤙
😂👊🏻
T handle Allen key's kinda suck for that reason. I always use Allen key sockets and a ratchet. Plus with socket you can use a torque wrench to get it tightened to factory specs.
Is it possible to change the throttle, break cables without rerouting cables, may be bigger bike cables. After changing to the longer handle bars.
It’s called an Allen hex socket, extension and a ratchet👍 you were using “t handle” hex which aren’t to great for busting bolts loose as you found out, better use for them is low torque things.
I have a set just didn't think to use it. It was 4 in the morning lol.
Attention Deficit been there
I've always used a closed end wrench on the 90 degree Allen wrench for added leverage.
Love your videos. You live in such a cool place. Im goona get a Grom ASAP. Got a 2016 KTM690 but I am getting old and cant even touch the ground. Selling it and go for the Grom. They look super fun. Thanks for the post
Thank you I appreciate it! I would love to own a 690 someday, the Grom is such a fun little bike and I am sure you will have fun on it as long as you don't have any expectations of getting anywhere fast haha.
Attention Deficit
Thanks for response. I've got a YZ450 that I will use for desert and stuff. The Grom just looks like a super fun bike to bop around San Francisco LA and Santa Cruz on. Can't believe how many people have them. Thanks again
Love your videos. You are very knowledgeable. It’s always entertaining.
Thank you Mandy!!
Can you do a wheelie tutorial on your grom? I love your in depth videos.
Pauline T Coming soon!! Thank you for watching!
6mm Allen socket with an impact or if you only have the metal keys use the short end of a 90 and put a jack handle or wrench on the end as a cheater bar to get more leverage!
Allen sockets are nice to have!!
I have some!
use a rathet with an allen key socket and its easy to get those bar bolts off
Yep!
I’m 6’5” and I appreciate your perspective. I’m about to purchase a Grom as my first bike. First mods are gonna be new bars. As a new rider not planning on stunt riding much so do you think the riders would serve in that role better? I’m planning some adjustable foot pegs that drop foot position an inch or so too.
Awesome! And yes the riders would be great for just cruising around.
Nice! How do you like them? Post a video of how your knees sit in relation to the new bars. I may add the risers to mine
Risers did not end up working out for me.. They had too much play in them and didn't feel sturdy, they would be fine for just riding but I wouldn't recommend them for stunting.
thanks for a good detailed video , I will be subscribing
Thank you for the support!
With the Hex bolts, just go ahead and do what the shops do. Get yourself some hex sockets and a impact driver. Makes quick work, you'll never strip a bolt because of the way the hammer action works.
Already have a set just didn't think to use it👍🏻
Attention Deficit happy modding! By the way, keep it up man you have really good production value and it's very easy to keep interested! Subbed!
You too! I really appreciate that man, I returned the favor!
Attention Deficit thanks man! Cheers!
Good video I've used the rox risers on my tiger 800 n they r great . I won't use them on my grom just the handle bars though ...
Davyboy Colon I love them! works perfect for me being a taller rider. Thanks for watching!
Can you still see the speedometer clearly with the higher bars?
Yes! Just fine.
You're gonna make it keep it up dude!
+Andrew Stout Thank you! Plenty of content to come, thanks for the support!
How do u not have more subs ur vids are amazing
george pappas I really appreciate that, thanks for the support!
It needs time
That's exactly what I want to do, thanks so much! Quite a process really. (& you probably have heard this, but I'd use cheater pipe bars on the T allen.)
No problem! and there were a bunch of different ways that I should have done it but I got it done lol
Are you still running the klx110 handle bars? How would you compare them to the xr50crf50? I think in the video you had not tried the xr50crf50 but was hoping maybe by now you might have compared them. I want my bars to be just a little taller than the stock ones and not sure which are higher. Any input would be greatly appreciated.
Yes I am! The XR50 never felt right for me, I had them on several pit bikes and the ergonomics just never felt right.
I just bought the pro taper evo adventure highs. I hope I did not go to big..
Hook a adjustable crescent to the allen tool and you'll have more leverage
Good tip
Awesome video man! Definitely know the bar set up I'm going with now, everything I've seen so far looks to short for my liking. You've got a sub from me!!
Insane Octane Thank you!! I ended up doing away with the risers because they didn't feel tight enough for my liking but I miss having that extra height from them.
Attention Deficit Nooooo I just wanted to hear how perfect the set up was etc 😣 but if they move under pressure that'll be no buano for the riding I want to do. What's the height difference from to the set of bars now?
About 3 inches I was bummed too.
Attention Deficit that's not to bad. I'm not a super tall guy I just like the taller mx feel so that might work.. keep up on the killer content I'll be waiting!
Yeah I'm fine with the bars alone honestly, feels a lot more sturdy for my riding style. Thanks for the support! New upload tonight!
Hi I am a newbie to do Stoppies and wheelies does it matter if you have the ABS version Grom? I am learning a lot from you videos thank you hope to see more videos soon!
I am really not sure on that.. I imagine it would interfere quite a bit, I'm sure there is a way to disable it though.
Hey, when you do not se the risers, do you need more lengthen the wires and cables?
What type of cell phone mount did you use to make it work in the center? I am using stock handlebars but I could not get my cell phone amount to work in the middle as it hit the center Fork nut. Thanks for info
THOSE SNAP ON SCREW DRIVERS THO ..................
Getting it done!
Or use a Allen socket and a breaker bar to break loose the handle bar bolts.
You are like the 20th person to say that on this video lol. Thanks for watching!
Impact torx and allen head sockets are nice..
I have them all lol I just wasn't thinking. It was a long night😂
Great informative video bro, two thumbs up!
Thank you!!
I have Honda minis (which sit lower than stock), and I’m getting those bar risers. Do you think I’ll have to lengthen the cables? It should sit about at stock again so I think I’ll be fine.
Honda minis are nice but my arms are way too long for them. You should definitely be fine without re-routing cables. Thanks for watching!
Attention Deficit one more thing, I have the risers, how do you tighten them down ? I can’t get a wrench in hete
It is a pain but try and tighten one side as tight as you can, then slide it down into the position you want and tighten the other side.
Attention Deficit thanks man I kinda got it on good and tight. Love the videos, just realized I’m not even subscribed lol
How tall are You? Getting my Grom next week and being 6 feet probably rising the bars. How did you like your set up? (Feel, handling, ergonomics comfort) great video
I'm 6'4 like I mentioned in the video, I loved this setup but eventually did away with the risers. I recommend removing the bushings in the triple clamp if you use the risers so they feel more solid.
Put a small pipe over the allen key/wrench for more leverage 💪🏻
Love the videos defo subscribing keep up the good work
Thank you for the support!!
I tried wheelie on xr400r . It is too big. Should I get grom or smaller offroad like klx 140l or tw200
do i have to take the grips off the throttle tube etc. or can i leave them on? Will the whole thing just slide off the old bars and onto the new? Cheers!
If you are re-using the old grips than yes you can leave the throttle grip on👍🏻
@@AdventureDaily Cheers buddy
Just get a socket with the alien head on it and use a ratchet way easier you can get them at harbor freight
This was years ago, I am much handier now haha.
Will a regular power drill work for doing those holes? Was it a 5 mm drill bit that you used? Thanks!
Yes and yes!! Thanks for watching
Looks sick bro love it
Sick video man. Liked and subbed!
Loki_^ Thank you! I appreciate it.
Thanks for the video. For the crossbar and padding block your view of the speedometer?
Good stuff man.
Kyle Owens Thank you!
If you install Pro Taper's without the risers is the re-routing of all the cables needed? Thanks!!! PS using a HEX socket on a ratchet or impact driver works great.
You won't have to re-route anything if you aren't using the risers! Thanks for the tip and thanks for watching!
Thanks for getting back to me man! Channel is awesome. I just subbed yesterday; I've got some catching up to do.
Of course man! Thank you for your support! And service! Glad to have you here on the channel.
Wicked setup and vid dude.
Tiny Rider Thank you! I appreciate it.
Keep doing what you doing great video content
Ron Finch Thank you! I appreciate the support.
I'm late, but good video doggy. Thank you.
The link for the phone mount is not the same one pictured in the video. Close but not quite.
Ya just slot a bar over your hand socket,,torqueing grom yrdope son🍀💪
Have you found a way to add the 1/4 turn to full throttle tube?
Haven't looked into it yet!
did you just raise the handle bars higher to clear the phone from the tank????
No I’m a tall ass mf’er and needed the leg room.
@@AdventureDaily im wanting to put a gps right there where you put youre phone .just wanted to see if all i needed to do was just adjust the handlebars to clear the tank . Im shorter so just need the gps to clear
Did you chop your bars down at all to shorten them? Or did you leave them at the width they came. I got mine on they just look super wide right now
I'm 6'4 with the arm span of an orangutan so the width is prefect for me. Do whatever feels right for you!
Hey man. Do you have to drill any holes in the bars ? I seen a video that showed holes being drilled to seat the turn signals and the kill switch. Do you have to do this or will they keep moving on you ?
Watch the video 😂
Love the set up!! What do you recommend for a little more power and some top end speed. I'm 5ft 10 and 180 pounds. Any way to get 65mph out of one? Thanks in advance
Sprockets. More teeth in the front, less teeth in the rear.
you sir, have made it official, I'm buying a grom!
You won't regret it! A lot of fun to be had on one.
Attention Deficit
Ok, with trailer & all & custom strong rear rack. 👍
That bike looks amazing and great video and S/o to Ohio that’s where I’m from
+Mike Weaver Thanks! I appreciate it
What size drill bit
They make allen bits that can go on a socket wrench...
Use a 6mm wrench on the Allen wrench for more leverage. Or use a actual 3/8” drive 6mm. Kinda late on the comment lol..
pro taper SE it's the best but i have the lower one
Agreed. I love my pro tapers
Hey I am 6’4 250lbs I really wanna get a 2018 Honda grom and the only thing is that my knees hit the handlebars when I turn sharply, what handlebars should I get so my knees don’t hit?
Any MX bars you should be good, I'm 6'4 as well.
Why? Why? Get a 20in. Bmx while you're at it.
What size drill bit was used to drill the bars?
+Mike Lechler I honestly don't remember. Pretty sure I just eye balled it.
How did you tighten the fasteners at the bottom of the risers?
Allen sockets. Get yourself a set.
It's 2020 now and I have a set lol.
How do you like that phone mount? How is it holding up?
I absolutely love it👍🏻 It's been through a lot and it's still as good as new.
Boomerang is Good Too
Yep!!