Це відео не доступне.
Перепрошуємо.
Drift Trike Seat, Pegs, and Cruising
Вставка
- Опубліковано 13 бер 2016
- Garage Amino for iOS: apple.co/1pJ66pI
Garage Amino for Android: bit.ly/1S22iJo
Download Garage Amino in the above links! In this video, we install a seat, foot pegs, and we go for a cruise. Let us know: paint or turbo next?
Thanks for Watching!
----------------Go Power Sports Parts Used in Today’s Video---------------
Tell them CarsandCameras sent you at checkout:
Live axle kit: bit.ly/3Qq1fXJ
1” bore clutch (420 pitch): bit.ly/3QpvKgo
Like CarsandCameras on Facebook: / carsandcamer. .
Follow CarsandCameras on Instagram @CarsandCamerasReviews
Read full Terms & Conditions here:
www.cars-camera.... The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.
Turbo or paint first?
+CarsandCameras boost
+CarsandCameras Turbo
+CarsandCameras turbooooo first!! chooo chooo!!! it'll be faaannnne!
+CarsandCameras Is that even a question? Turbo.
+CarsandCameras TURBOOOOOOO
I would not notice if you did a episode with Jason instead of Ike
I can't help but smile everytime I see this video. Your brother is a spitting image of you Ike!
Jason's voice is slightly more 'Hank Hill' than Ike's :D
+falloutboy thanks
falloutboy did you see it slip 13:21 too
You should do a garage tour of all your go karts, bikes, and other projects
That pull starter has a three bolt pattern. You can turn it to face back. I realize your putting a battery on but you may need the pull starter.
The engine sounds and cut away editing between the three during the cruising scenes reminded me of the chase scenes in Bullit.
Nice little go-kart at the end there... I just picked up a few projects tonite that will keep me busy for awhile. Love updating old homemade and older model go-karts.
The world needs to see the drift trike drift!
(and of course turbo before paint, duh. Haha) You guys gonna megasquirt it or something?
needs pvc on the tires so it will drift.
+apollo holcomb we will
Remove the governor first, then install turbo. Got to make sure frame holds up to the increase in power! You might have to add more of those gusset thingies🙋. C&C rocks! love the videos, so fun to watch.
+Michael G Curry we will. and thanks
Oh man, all you guys need is matching vests and go out as a gokart gang! Now there's a video to be made.
I think you should do a budget build for $200
Like if you think they should
anyone else having trouble getting this one to load.
+Jeremy Daniels ya i just let it sit for 10 mins
+Jeremy Daniels Been a problem with UA-cam for about a week now. Keep reloading till it works... :/
it might be a little early for a new project, but i thought of a crazy idea that i think you guys might just be able to make. okay so i propose your next build should be a shopping cart go kart! im sure you guys can find a way to turn a shopping cart into a go kart, you guy's are pretty creative. i have full faith in you!
You guys should get a body shop to sponsor your projects. Get all the karts and mini bikes painted and finished.
take a heat gun to the bottom edges of the seat and bend them upwards to make a bucket seat!
I say turbo before paint, But perhaps remove the governor before turbo.
I agree
dude dude from the bike shop needs to give me a Hank Hill impersonation. he sounds just like him. "Damn it Bobby".
its da power big wheel. reminds me of the chariot a buddy built when I was a kid, motorcycle front end, wide platform to stand on and honda 350 powering a wide go-kart rearend. never approvable for road use but sure wild looking when Doug took corners crouched down leaning to the inside (on pavement).
One instagram post later and I'm magically here
The v twin sounds like a harley
Y'all should make a 4x4 go cart next
This is my second favorite build. I like the V twin. Can't wait for turbo! Keep up the good work!
+Mike812 thanks
Needs some hardcore pipe insulation or a BMX padding on that riser tube...
Or just officially name it "The Nutcracker".
+Maxwelhse use the foot pegs right and ya wont bust a nut
Awesome build. Structural integrity is a bit iffy but awesome nonetheless.
Curious Guys, when do we see the concerned parents commenting on lawn maintenance and Jeb the Bush?
+David Crossley they are not happy. we are looking for another place to ride
😊
It would be so fun just to ride around on them back roads
Haha Taylor says "I'm gonna sit in this director chair" lol
Can you re-upload I can't see it and a lot of other people can't either
+Brandon Putman Been a problem with UA-cam for about a week now. Keep reloading till it works... :/
+Brandon Putman wait for a while then come back to watch it
at 4:45 Ike said "mint" uh oh @RicerMiata is spreading lol
+Anthony Witz i got that from roadkill
turbo and I just wanted to say that yalls videos inspired me to build a 212cc minibike took me 1 week to build and I call it the 200$ minibike keep up the good work guys and keep making cool vids
+TexasPride 4lyfe thanks
I like the location of the pegs,thats always been the problem with drift trikes....although they need some gussets.
I think they're going to find out that they need to re-gear the trike in order to get more angle. seems too slow
Turbo danmit! And lose the governor!
Shout out to your dad for letting you use the shop :)
Need to change the name to "carts and cameras" really cool build. Love the videos
Do you sell any pf your stuff?
Are Ike and Jason twins?
+Tj Avione Yep
+CarsandCameras tell taylor that this isnt a drug deal, put away the crack!!!!!!!!!!!!
+CarsandCameras make a kart with a jet engine pls
+Ruben Garst if you want that, look up "jetcart" by colinfurze
They look noting alike lol
Go kart mafia roll out!
You guys should do a go kart/mini bike/drift trike field day with your friends!
Was there even a wheel on that grinder?!
+James King i used it all up. lol
Just givin ya a hard time.
i figured that. lol
turbo. and is anuone else having trouble playing the video
that turned out fucking sick, good job. i just came across this channel and i don't know how i haven't already found you guys, really enjoying the content :D
Living out f a city must be so good for this
must be twins or am i seeing double IIKes ?
twins
For a drift trike not alot of drifting...
+RenoPvp the thumb throttle doesn't open it all the way, needs adjustment
Id still be on that thing like crazy doing donuts
if you don't put stiffer valve springs in it the turbo will just float the valves and kill any power gain
I would say, first remove governor and make sure the engine goes full throttle. Then add the turbo. When the trike earns it's colors then you may paint it.
As it is, zero to governor doesnt take long so you wouldnt see much improvement with the turbo (My thinking) But if you were to remove the governor first then you could see a massive differance
You guys should put some guards on the sides of the pegs so your feet don't slide off and you your legs don't get all mangled
ive met a few twins before. and usually they sound pretty much the same. but its almost weird how alike ike and his brother sound exactly like the same person almost.... idk
you need to have a drag race with those 3 before and after the turbo#driftlife
first I would like to state the obvious....turbo...lol next, what size rear tires do you have? I have a website for PVC that comes in a 5' piece that's schedule 80...I can post it here or in garage amino, your choice. thanks again for the awesomeness!
Thats an awesome video with all you guys cruisin!
put an old school bike front fender on it and paint it flat od green with a white star on it and use an ammo can as a gas tank.
Whaaat? Now there's two Hanks... 😆
you guys should make a 4 wheel drive gokart
You should upgrade the internals before puting a turbo on it!
Pretty cool. I live in the city so need to get out a bit out to ride trikes. I want to build a new frame with my everlast welder soon.
you need a triangle on the neck of the bike to the frame it flexes when you brake
I would stick some Supercycle Mountain Bike Grips on the foot pegs for extra grip..and make it look a wee bit more cool
+ryzo mcgregor we thought about that
Turbo please. Just thinking you could put rubber bicycle bar grips on the pegs. Another great video chaps,what other projects are in the pipeline? I
all your guy's builds are great! I love watching your videos! keep up the good work
+Kaden Richardson thanks
you guys should make a shifter cart for your next build
You guys should definitely go to an empty lot one episode and really let your karts rip!!!
hey guys u guys should put on headlight so when u guys want to go for a night ride u can see
id also suggest moving the drift trike brake lever to the left side
you should put a light in the front where you were thinking about the battery
I think I see a new go kart build! bring it on please! (reminds me of the 670)
i think is a pretty good idea make a drag kart with a frame like the rat rod kart and a big engine... i would like to see that :D
The trike is looking so awesome! I actually really like the foot pegs. You guys have got to breathe some life into that engine though! It was painful watching +Isaac it'll be fine putt along while you guys zipped all around in your karts! For heavens sake the 212 was leaving it in the dust!
Crack kills, I think I laughed a bit too hard when Ike said that 😂😂
Neil Conroy that wasn't Ike. It was his brother Jason.
I want to see a 670 DRIFT TRIKE ! ................. That would be awesome ! ................. The Turbo is going to be cool also , but a Turbo 670 Drift Trike would just be bad ass .............
You should do a showcase vid with the current and upcoming builds if you have time
How about converting the recently added kart to a front wheel drive rear steer with the v-twin motor and the turbo? It could handle all the power with no lifting fears.
you guys should totally convert the minibike to a 4 wheeler
Its official....ya'all are certified badass! started watching misfit garage, checked my youtube saw your new vid and ya'll beat misfit garage for my time! Keep up the great work guys!
+dragbikedemon thanks
I can't wait till they put the turbo on!
hey guys im from Australia and love your videos.I have a awesome and ridiculous idea for y'all. put PVC pipe on the rear wheels of the 670!! that would be so hilarious and scary. which you guys posted more often but know it's not possible. currently in the process of completely rebuilding my dirt bike and going well. p.s. TURBO FIRST!!!!
+james kay lol thanks. and greetings australia
right when i herd Isaac say "total roadkill" i subscribed
lol. thanks
you guys should do a racing lawn mower build but still awesome vids
Yall need to add like a 125cc two stroke or 250cc four stroke powered cart to the production line.
Need to put the cables on the inside of the frame, make it way cleaner after the paint
I'm torn between building a drift trike, and building a 670cc go-cart.... maybe I should build a 670cc drift trike? XD
+yuck fou go for it. lol
if your still lookin for pvc for the tires hit a heat and air supply store I'm in the biz and we pvc duct work they should have it up to 16 inch and the 90s are black pvc
I love how that 670 sounds and cruses it is my favorite
+Elmoojo 1 me too
I concur y'all...I would love to build one of those bad boys...however, I unfortunately won't be able to ride it...catastrophic spinal snafu (been this way for 13 years)...I live vicariously through your videos...thank you guys...I'm in N.C. also...Silver Valley area...south of Greensboro...I think it would be cool to see these rides in person someday...please keep making videos. ..y'all do a great job...
wow that sucks. im sure we will have a meet and greet soon mabie you can show up. and thanks
Turbo!
For the pegs you can use BMX pedals.
Seems like the rake on your forks is a little to steep so your steering is a bit floppy,needs a total rebuild...or more gussets.
do a mini chopper build
did i just see ike riding that thing in chopper fashion
>??? left hand on the leg just cruisn hahaha
every very very nice neighborhood has one of these now-days; trailer park people that has made it in live and now lives two nice homes down. I have to admit I like these guys.
Have you looked at colin furze channel he did a drift trike but covered the rear wheels to make it drift a lot easier.
When he said what day it it today I was like PI day!
For the pegs maybe use some bike pedals and weld them on.
bro 5:40 that guy sounds like hank from king of the hill!!!(:lol
+Cars and cameras you guys should deflate the rear Wheels and put a pop pipe on them and then inflate them to fill in the extra space
+Mark Varivoda we are
Ok
Looks awesome! Except when you crash into something and your goodies smack the front steering mount😂
+GO Guy who needs kids. lol
+Isaac it'll be fine 😂 ha ha ha
I think you guys should do black and blue for the trike
Turbo first! Paint can wait
TURBO FIRST!!!👌🏻💪🏻💣
for sum odd reason this video won't play for me idk why can sumone send me the link