This is the perfect starter project but what others would you like me to do.....Also get your colfurze sticker sheets so everything likes like a furze build www.colinfurzeshop.com Hope your all healthy and well
The problem is... he probably has a lot more in the house than your average person... you never know what this person has in his house- for all we know, he could have a working light saber in his house
The metal hole saws he uses are pretty darn expensive. And it would be almost impossible to build this like he did without them. Still awesome though. I just remember a while backbeing surprised when i needed a hole saw to mount some gauges in a custom panel i built. One saw was $50, without the mandrel or bit!
A trike offroad is really dangerous... It's doable on flat surface but I wouldn't recommend on uneven ones. Say your right wheel hits a divot while your turning left, you are flipping no doubt. Just use a quad.
Porkchop Sandwiches no not one for off roading like 4 wheelers but one for dirt because his trike as awesome as it is, would have the same problem as my trike, a solid axel doesn’t work well without pvc
Thank you Mr. Furze! You have helped me double my speed of construction. Even with 50 years of fabricating experience, I am slow (always trying to make it perfect). I have started using your brilliant methods of corner cutting mixed with my way only when necessary. You schooled a Grey Beard! Cheers!
So cool, I've seen several of your projects & gotta say I'm impressed. This one looks like too much fun! Might have to see about this my 10 year old twins would love it. Thanks for the idea, & take it easy.
Been following Colin a long time, he's had plenty of projects that fought at first but he problem solves and finds solutions to those challenges. Haven't seen him try anything the defies the laws of nature or physics so there's always a way to make it work, just have to find it.
This is turning into the engineering equivalent of Ready Steady Cook... "Well Ainsley, today I've brought 3 lengths of angle iron an old BMX and 20ft of duct tape and I'm going to be building a group B rally car"
Other UA-camrs: Here are 5 10min videos of me doing a simple project. Colin: Whole frickin drift bike out of thin air, in packed and entertaining 17min video.
I have just resigned to the fact that it is indeed illegal for Furze to wear a helmet. ....actually.. Hey! Colin! Build a Furze hemlet will you? It should have nothing to do with safe.
This is the first of Your video's that I have watched & I say first as I am sure I will be watching many more, I really appreciate the detail to attention with things such as the measurements without taking a bunch of time or making it boring but simply slipping the details in! Thanks Man
“Might get a bit warm we’ll see, we’ll see” for some reason I found that hilarious. Love watching the videos. Such a good personality and sense of character
me: sees title and pulls out hammer and screwdriver colin: pulls out angle grinder, propane torch, engine and drill me: throws screwdriver and hammer at the wall
wait till he goes ULTRA NIGHTMARE, bare hands only, and not a single part ordered, so from 0 to a bike, including mining all rescources and crafting the tools himself, caveman start
@Your Mother Everyone start from somewhere and first projects do not need to be large. Its better start small and maybe not make it your self, but fix something someone else discarded, learn that way and develop your skills and knowledge. Garage would be optimal, but you would be surprised what kind of places people build stuff. Moped fixing on winter.. welp moms not home so living room it is! Aint freezing my fingers outside! Building custom desk, apartment building living room it is and so on. Of course proper work shop is ideal, but you can manage with some precautions in other places, like far better dust control and using hand tools instead of power tools. Takes more time and effort but neighbors wont come knocking your door.
Me: Surprise me April April: Colinfurze has uploaded "Make a Motorised Drift Trike with Basic Tools" AND U HAVE EVERYTHING U NEED. .. So Basically Colin was make me my April. Really love u man. plz take care about u bro.
Hahaha I didn't notice that I just looked at his shirt and it was very funny - he dresses in a tie but at the same time, his shirt is dirty which is a very contradictory look. I feel as though he is like that - his results are neat but he isn't or smth idk
Please do these kind of videos more often, i really liked it! I know it may be more work but this way we can enjoy all these smart little workarounds that you basically cant live without if you dont have a workshop (or high end shed like yours). Cheers mate and stay awesome, your videos are truly one of a kind!
Alright, Colin, here's a challenge: build an ultralight aircraft without any "advanced" tools (no lathe, welding, CNC, mounted drills, etc...). Good luck.
@@jaredsdad8361 🔴 What Is Islam? ⚠️ 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
Hey Collin. Ive got to say keep it up mate ! Ive been working as auto mechanic all my life. I engine swap and fabricate cars for a living and every time i see one your videos i learn something about metal work that helps me out on projects. Have a good one bud ! Cheers.
*Newbie:* Whacks off cooling finns with a hammer *Engineering student:* Cuts them off with a hacksaw *CNC Operator:* Removes them in a professional CNC milling machine *Colin:* Cuts them and whacks the off with a cut-off wheel :D
HealthyAc idElemental False. You can build an atom gun with household materials, but not with just the contents of ONE house. You'd have so much radiation exposure at that point, building a bomb wouldn't kill you any faster than your cancer will.
Just use a propane torch and a welding rod, no? Butane might work if you haven't got a propane torch; it burns at around 2600F, while a properly made welding rod should melt at around 840F.
You did a really good job of building this drift trike. I should have watched your video before I made my drift trike. Now I know why I had such a bad migraine headache when I built mine.
You can make a stick welder with a microwave transformer ua-cam.com/video/r6oDCbcmtWw/v-deo.html And here is one super simple and dangerous that an African man made with a bucket of water.. ua-cam.com/video/HTJKksnurS0/v-deo.html
Don't look on Wish. They got the guts for a spot welder for $27. You supply a car battery for power source. Looks totally safe with the all the exposed terminals. Not.
Do the words “Health and Safety” even appear in Colin’s vocabulary?!? Haha love it! Just an ordinary guy with an ordinary tie... 🙄🤔 keep up the good work man! 👍
Just for clarification... I am aware of the whole “safety tie”... the reason I mentioned it with the added medium of a rhyme... Also hence the upward looking eyes and thinking emojis... as you were... 👍 haha 🤣
'The most basic tool kit, I can imagine.' Colin: "Well gosh, I need to cut this bar in half, how am I gonna do that?" Also Colin: Chews the bar in half.
Love this! Reminds me of your channel back in 2014/15 when you were just some Lincolnshire plumber pissing about with a camera and no regard for health and safety! I'm still waiting for wall of death V2!
Just found your channel and I greatly appreciate the music and how charismatic you are. Not to mention how knowledgeable you are with tools and making things work. Especially without a welder. Mad props bud. I just subscribed and I look forward to your next video.
Brilliant project Colin, like getting in a time machine and going back to when you first started! Basic fun stuff that anyone can have a go at (nearly!)
I love this, I'm all about using simple accessible tools and basic materials that are laying around the house or materials easy to acquire that are free.
Colin: ‘makes literally the same project multiple times’ Audience: ‘Shows the same enthusiasm every time’ By way keep up the good work it’s good with some entertainment in these times!
yeah, a lot of people think engineers are practical people . . . many are; but if you want something invented and made, get a tradesperson: Mechanical-Fitter-Machinists in particular have the skills in these videos.
Colin: "The seat, now I did two methods for mounting the seat. I used a connector on one side and on the other side I used a bolt that went straight up with a nut on top...." Said whilst sitting on said seat.. Yep, the seats certainly got a nut on top :D
Newest fan here in L.A. My kids are I are stoked to build your Drift Bike with basic tools. That said, we need to run an electric motor in this bad boy so I'm attempting to map out a mash-up of this bolt together bike with your electric bike. Keep making rad stuff!
@Shambles1980TRealOne not really. there are many variables in anything and every thing. you cant be certain. saying thats true for almost anything is probably untrue
@@futuromc the problem is that the welder he made requires skills with stick welding before you can weld with that one, honestly go to your local maker space or prep everything and go to you local welding shop and they will do it for cheap or free
I like that this shows how innovation can't stop someone with a goal. Too often I hear people make excuses as to why they can't do things (typically for lack of resources). Clearly they aren't trying/thinking hard enough.
This is the perfect starter project but what others would you like me to do.....Also get your colfurze sticker sheets so everything likes like a furze build www.colinfurzeshop.com Hope your all healthy and well
Yes man! I hope hammers come included!
I'll build one, I need to get around injecting!
Hi
Sipping my self a cup of tea while watching a brit. A true Englishman.
colinfurze cool bro
Create a series called “ Colin Furze Basics” where you only use basic stuff around the house that people will have!
Try and get pinned
Pretty good idea tbf
The problem is... he probably has a lot more in the house than your average person... you never know what this person has in his house- for all we know, he could have a working light saber in his house
Like me the biggest best tools I have is a drill, table saw and air compressor
Dumentcha Cat my best tool is a pencil
So what you’re saying is that it even has a built in seat warmer?
I’ll take your entire stock!!!
Everybody gangsta till it starts burning ass
Lol
Damn, you beat me to it! :D
Well played!
Noice
The metal hole saws he uses are pretty darn expensive. And it would be almost impossible to build this like he did without them. Still awesome though. I just remember a while backbeing surprised when i needed a hole saw to mount some gauges in a custom panel i built. One saw was $50, without the mandrel or bit!
I'd love to see an off-road equivalent to this drift trike! I dont have nearly as much asphalt as I have dirt where I live
Otto Henning same here I’ve only got dirt and my drift trike that i built struggles in the dirt.
A trike offroad is really dangerous... It's doable on flat surface but I wouldn't recommend on uneven ones.
Say your right wheel hits a divot while your turning left, you are flipping no doubt.
Just use a quad.
Porkchop Sandwiches no not one for off roading like 4 wheelers but one for dirt because his trike as awesome as it is, would have the same problem as my trike, a solid axel doesn’t work well without pvc
Buy a Piaggio Ciao it's an enduro monster trust me
like us all buddy
Thank you Mr. Furze! You have helped me double my speed of construction. Even with 50 years of fabricating experience, I am slow (always trying to make it perfect). I have started using your brilliant methods of corner cutting mixed with my way only when necessary. You schooled a Grey Beard! Cheers!
He's bloody good isn't he
Right he is
Love this content and community!
NHS: please don't do anything dangerous that could put you in A&E.
Collin: I'm fine, safety tie engaged.
m.ua-cam.com/video/beY43TYC-tM/v-deo.html
🤣🤣🤣🤣
big 30 honcho LOL
Ok, you all heard Colin: Everyone build a drift trike. We can start up a racing league once quarantine is lifted.
Well that gives us a year to build it then. Should be some awesome drift trikes
I have a pedal one lmao. Looking for people I can ride with
.
I have 2 that do 70mph and drift on tyres not the silly plastic covers. Go peep ma channel magradrift, same name on Instagram.
As long as we stay 3mtrs apart we should be good to go 👍👍
This man never ceases to amaze me. Absolute mad lad right here
So cool, I've seen several of your projects & gotta say I'm impressed. This one looks like too much fun! Might have to see about this my 10 year old twins would love it. Thanks for the idea, & take it easy.
Hey Colin, I have a question.
Have you ever built something that just refused to work, no matter what you tried?
Been following Colin a long time, he's had plenty of projects that fought at first but he problem solves and finds solutions to those challenges. Haven't seen him try anything the defies the laws of nature or physics so there's always a way to make it work, just have to find it.
@@MohawkMotors how about the Flying Bike thing? with propellers and why not, I think that could potentially chop some limps of
Of course
@@edlaralara he has made a few things that fly already
Those projects don't get up-loaded, they get shit-canned. ;) :D
This is turning into the engineering equivalent of Ready Steady Cook... "Well Ainsley, today I've brought 3 lengths of angle iron an old BMX and 20ft of duct tape and I'm going to be building a group B rally car"
Don't give him any ideas
Love your work Colin. The best most entertaining and zaniest way to learn to fabricate! Don't ever stop!
Other UA-camrs: Here are 5 10min videos of me doing a simple project.
Colin: Whole frickin drift bike out of thin air, in packed and entertaining 17min video.
it doesn't even feel like 17mins it goes by so fast i wanted more.
With rock music, can't forget the most crucial part of a Colin furz video.
With a tutorial too!!!!
14:28
Me: "OH NO!!! HE FORGOT HIS HELMET!!!"
Also Me: "Oh... Nevermind, He's got his safety tie."
I have just resigned to the fact that it is indeed illegal for Furze to wear a helmet.
....actually.. Hey! Colin! Build a Furze hemlet will you? It should have nothing to do with safe.
Ha... ha...
MinBlick it’s gonna be made out of glass...
One day he'll show us the "blooper edits" for this vid, and we'll get to see his tie get caught in the chain sprocket. 🤪
Isnt a tie way mroe dangerous than no helmet?
Cus can't it get stick in the wheel and suffocate you?
Colin, since a tie is basically your signature, you should make one...out of steel...with epic stuff on it...with basic tools.
Like a Swiss army knife, yeah? Or a fold out sword. Lol
I like that! The spy tie. Or the "guest at the royal palace" tie.
Do it in panels so it bends
This is the first of Your video's that I have watched & I say first as I am sure I will be watching many more, I really appreciate the detail to attention with things such as the measurements without taking a bunch of time or making it boring but simply slipping the details in! Thanks Man
_"Roughly Exactly"_ .. Yes Colin.
I read that in Colin's accent. YES COLLIN!
Lmao!
I watched Colin learn to use all his cool tools over the years. It funny to see him learn how to not use them.
Everyone after quarantine will be driving these puppies around
jahag kagau lol
ua-cam.com/video/uHYs7bx5Zhc/v-deo.html
Yep...
Just discovered this guy, that craftmanship is insane. Very satisfying
You should recreate Jeremy Clarkson's Motorised Suitcase (World record for speed?)
Yes or even a colin furze version of a Honda Motocompo except faster
Me: Guhhhhh.... I'm so bored at this quarantine!
Colin: "Uploads" I got ya mate!
m.ua-cam.com/video/beY43TYC-tM/v-deo.html
Should have been
Colin: *Uploads* "i got ya mate!"
@@o5-814 oh ok. Thanks!
@@sinfulwrath666 nice
“Might get a bit warm we’ll see, we’ll see” for some reason I found that hilarious. Love watching the videos. Such a good personality and sense of character
You must be one of the most clever people on you tube mate, all your stuff is brilliant 👍🏽👍🏽👍🏽
Coming soon:
_How to build a space station and get it into orbit with basic tools_
"That rocket fuel tank is basically 500 quid, you can get that from a scrapyard."
aah yes
Ricky Sanchez and I are waiting :D
If the space are real 😂
Elon musk: am i a joke to you?
One of my favorite things about Colin's videos is hearing new music and finding new upcoming artists
Colin: use most basic tools.
Also colin: 11.17 uses grainder as a hammmer
Any tool is a hammer
@@nicholaswuite4932 correct! also grinder like in the app ;)
redwarf ??
1:10 also
The same comment was also running in my head too...
It is called grinder u know, grammar or u missclicked
Colin you have one of the best UA-cam channels! Always fun to watch 😁 Thank you from the states 🇺🇸
me: sees title and pulls out hammer and screwdriver
colin: pulls out angle grinder, propane torch, engine and drill
me: throws screwdriver and hammer at the wall
Exactly 😂
I mean it’s impossible to do without an angle grinder lmao
@@itsCN its not. you can do all of the cuts with a simple hacksaw
Exactly
They are all pretty basic tools tbh, decent quality new besides engine would be £200 and you could use an old lawnmower engine from a scrap yard
man this guy is so good of a teacher that he made me feel like I could build a spaceship.
Miguel Silva ua-cam.com/video/dc1TIdtYO4k/v-deo.html
When a game is too easy, he started playing it again with difficulty on HARD.
victornpb And when he beat in on hard difficulty, he made one himself
@@steinwbf so what will be next dificulty level? Insane? With zip ties and string only?
wait till he goes ULTRA NIGHTMARE, bare hands only, and not a single part ordered, so from 0 to a bike, including mining all rescources and crafting the tools himself, caveman start
Bro its leaked he's gonna do it in hard-core mode soon after he beats regular hard mode
@Jonathan Browne I was asking it myself to. He also doesn’t use self locking bolts
I need to go in the shed and do something, after watching this now!👍🏻 I want to make a two-seater where someone could sit behind me🤔
Quarantine doesn’t phase Colin he spends his life in his garage anyway😂
@Your Mother Everyone start from somewhere and first projects do not need to be large. Its better start small and maybe not make it your self, but fix something someone else discarded, learn that way and develop your skills and knowledge. Garage would be optimal, but you would be surprised what kind of places people build stuff. Moped fixing on winter.. welp moms not home so living room it is! Aint freezing my fingers outside! Building custom desk, apartment building living room it is and so on. Of course proper work shop is ideal, but you can manage with some precautions in other places, like far better dust control and using hand tools instead of power tools. Takes more time and effort but neighbors wont come knocking your door.
This guy is the closest thing to phineas and ferb in real life
no
Omg didn't think of that, but couldn't of said it better If I tried!
cOlIn FeRb
Absolutely not.
Except the inventions dont disapear
Love that you include more of the specifics of your build. Dont stop building!!
How are a crazy man that is a Genius I love your videos and how you make things from nothing like a kid but you make it happen keep up the good work
This seems like the type of UA-cam channel my mom doesn't want me to know about.
Well ,in my case its my wife ! 😁
Can i pay u to build one for me?
Mainly because it might put me in debt but for all the right reasons 😂
Yeah me too
Me: Surprise me April
April: Colinfurze has uploaded "Make a Motorised Drift Trike with Basic Tools" AND U HAVE EVERYTHING U NEED.
..
So Basically Colin was make me my April. Really love u man. plz take care about u bro.
Please upload a video of you driving the thing if you actually build one. I'll subscribe to you just for that!
@@CIoudStriker Oh sure, i'll try but it took me a few time and some patience to make it. I hope to finish it
Colin: "im a neat person"
Me: *looks at the drawers behind him*
Ah, I was looking for this comment.
Haha I did the same!
Hahaha
I didn't notice that I just looked at his shirt and it was very funny - he dresses in a tie but at the same time, his shirt is dirty which is a very contradictory look. I feel as though he is like that - his results are neat but he isn't or smth idk
Hes neat on things that matter lol :)
*HE* knows where everything is, anybody else finding something is a lost cause
this guy is brilliant, amazing thing came out of his mind
NHS: stay home save lives
Colin: how to build your own drift trike during quarantine
Please do these kind of videos more often, i really liked it!
I know it may be more work but this way we can enjoy all these smart little workarounds that you basically cant live without if you dont have a workshop (or high end shed like yours).
Cheers mate and stay awesome, your videos are truly one of a kind!
he is nearly at 10 million he going to do something huge hopefully
Fireworks... But hopefully a LOT (well, i do not need to hope really. With Colin, the use of excessive amounts of fireworks is always a given)
Essentially that seat is a frying pan if it over heats keep up the good work Colin my man
Alright, Colin, here's a challenge: build an ultralight aircraft without any "advanced" tools (no lathe, welding, CNC, mounted drills, etc...). Good luck.
lol... i wanna see him fly and post a diy airplane like peter stripl on yt. i plan on building a ultra light in the future just for kicks
Congrats mate, you just invented the paper airplane
A hang glider out of steel conduit. Simples
I like the challenge
Pretty simple but just takes much longer
Every single time.
Me: I'm gonna build this.
2 minutes later...... Nope, no chance.
D Hern you could do it man.
Same
Same
@@ahmdabdallah2132 what.. just what...
@@jaredsdad8361 🔴 What Is Islam? ⚠️
🔴 Islam is not just another religion.
🔵 It is the same message preached by Moses, Jesus and Abraham.
🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
🔵 It reminds us that since God created us, no one should be worshipped except God alone.
🔴 It also teaches that God is nothing like a human being or like anything that we can imagine.
🌍 The concept of God is summarized in the Quran as:
📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚
🔴 Becoming a Muslim is not turning your back to Jesus.
🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
Hey Colin, I would love to see you make a gun that shoots out old CD's.
Hey Collin. Ive got to say keep it up mate ! Ive been working as auto mechanic all my life. I engine swap and fabricate cars for a living and every time i see one your videos i learn something about metal work that helps me out on projects.
Have a good one bud ! Cheers.
*Newbie:* Whacks off cooling finns with a hammer
*Engineering student:* Cuts them off with a hacksaw
*CNC Operator:* Removes them in a professional CNC milling machine
*Colin:* Cuts them and whacks the off with a cut-off wheel :D
I love how he says it as a tutorial
Like Colin no one else is doing this
I am shittt
Brian Oconnell Shiit me too then 💀
You need to make one so that you can be "Sam Rides an Electric Drifting Bike"
Dr .McGillacactus hahahaha
Nearly 10 million subs, and this guy hasn't changed one bit. He deserves more
That’s a nice build nothing better than doing it ur self 🔥🔥
Next from Colin:
"I built an atom bomb only using stuff in my house"
Lol
Actually possible though
HealthyAc idElemental False. You can build an atom gun with household materials, but not with just the contents of ONE house. You'd have so much radiation exposure at that point, building a bomb wouldn't kill you any faster than your cancer will.
Colin:pulls 17 atom bombs out of his house
He had to cut his wiener off for the atom part.
“Roughly exactly what you need” 🤣
I would love to see a mini cybertruck made by ur style.
I like it. Like a power wheels sleeper cybertruck.
Good old Colin! Staying true to the fans! Thanks!
When you combine a smart mans brain with a child's wishlist you get this 😂
Colin: *i won't be using welder, only basic tools*
Me: make a welder with basic tools
Colin: ...
I mean I've used a ghetto welder to re spot weld in light brackets for a car haha just use a car battery with some old jumper leads
Just use a propane torch and a welding rod, no? Butane might work if you haven't got a propane torch; it burns at around 2600F, while a properly made welding rod should melt at around 840F.
Sam Dornan
That’s brazing not quite as strong as welding
A few car batteries and some cable and you got a stick welder
@@samdornan403 good torch isn't that cheap tbh
*_'Basic_** Tools'* - I got a Claw hammer thats taped together, a rusty adjustable spanner and a billion hex keys that never fit.
I wanted to like this comment but the like count was on 69 so I just couldn't do it
Yes... them hex keys man. We have about a hundred of them in our shop but we only use 5 of them for adjusting different tools and whatnot.
Basic tools whips out angle grinder
I don't have an angle grinder, myself. Figured he'd use a hacksaw and files.
He also used a blow torch. And did not even list it at the end.
You did a really good job of building this drift trike. I should have watched your video before I made my drift trike. Now I know why I had such a bad migraine headache when I built mine.
Next time on colinfurze, watch him make another one, but with only a hammer, screwdriver, and a hacksaw.
Build a WELDER with basic tools! >:-D
Bonus points for a TIG Welder ;-)
You should be able to do it with parts scavenged from appliances, primarily microwaves
You can make a stick welder with a microwave transformer ua-cam.com/video/r6oDCbcmtWw/v-deo.html
And here is one super simple and dangerous that an African man made with a bucket of water.. ua-cam.com/video/HTJKksnurS0/v-deo.html
souped up microwave......
A tig welder would be exceedingly easy to build
Don't look on Wish. They got the guts for a spot welder for $27. You supply a car battery for power source. Looks totally safe with the all the exposed terminals. Not.
“I’m a neat person”
Also made the cake-o-matic
And the pet terrifier/feeder
These are such great videos. I really enjoy watching your ideas from inception to creation 👍
Colin: “I’m a neat person I like things to be neat”. Also Colin:
Do the words “Health and Safety” even appear in Colin’s vocabulary?!? Haha love it! Just an ordinary guy with an ordinary tie... 🙄🤔 keep up the good work man! 👍
Except it isn't ordinary tie, it's a safety tie. 😁
it's actually a "fake" buttom up tie. He explained it once in a Q&A. If it were to catch onto anything, it would just rip off
Just for clarification... I am aware of the whole “safety tie”... the reason I mentioned it with the added medium of a rhyme... Also hence the upward looking eyes and thinking emojis... as you were... 👍 haha 🤣
That is the PERFECT lockdown project! Love it!
11:12 that hurt me. I died a little from the inside😜
“I got two inch wood” sorry about your luck brother.
Man_of The_year lmaoooo sorry for the late comment this is too underrated
JetGenix thank you my fine friend, i catch funnys where i can.
After 2 months
😂
This is the guy you need to be with in an apocalypse.
And that is exactly why he built a bunker in his backyard
My dad's garage: *Ahh shitt here we go again*
Sorry for abusing your mode for this past few years
Fyi it's the username
Matthew Squires abusing? You mean watching porn ;)
@@beemo4 *QUICK, take out all witnesses*
Lol
Colin, you are a smart man building that jig for making the sprocket hole bigger
Sell for £900 odd easy!
should build 10 of them and sell them. Have some minions help, I would!
@thicc_granola start now sell em to your mates parents for Christmas then you all got karts to race and you get paid
@that_guy that would be sick. Something like lawn mower racing.
2:02
Colin is truly a unique human being
'The most basic tool kit, I can imagine.'
Colin: "Well gosh, I need to cut this bar in half, how am I gonna do that?"
Also Colin: Chews the bar in half.
@Marcus Charlesworth Thats kinda hard to use without cutting your arm off, though
Love this! Reminds me of your channel back in 2014/15 when you were just some Lincolnshire plumber pissing about with a camera and no regard for health and safety! I'm still waiting for wall of death V2!
Colin is living his best life in quarantine
Challenge: make an electric vehicle out of a washing machine (or dryer)
Unfortunately appliance motors aren't suitable for an electric vehicle. You need something with a good torque range that runs on DC power
He's defintely going to have one of the best quarantines
But where is he gonna ride his inventions🤔
@@drzl8331 if its problem hes going to build a race place underground for that genius man its not hard.
Just found your channel and I greatly appreciate the music and how charismatic you are. Not to mention how knowledgeable you are with tools and making things work. Especially without a welder. Mad props bud. I just subscribed and I look forward to your next video.
Just imagine a small horde of teen freshmen engineering students yeeting around their campus on these things.
with helmets of course
Lmao
OK
Yeet Yeet!!
They’ll have to wait.
Brilliant project Colin, like getting in a time machine and going back to when you first started! Basic fun stuff that anyone can have a go at (nearly!)
First time watching Colin Furze and I have to say I really enjoyed it. This guy is crazy and I like it hahaha
I love this, I'm all about using simple accessible tools and basic materials that are laying around the house or materials easy to acquire that are free.
During Home Quarantine!
Other people : We are now bored in our House because of lockdown.
ColinFurze : Who's said I'm boring in my House?
I am not bored in my house ( =
iamandreja me neither
Am not my wife is mad about cooking biscuits and want a new oven bigger one i have to build one am working on it using my old water heater
@@iamandreja me too here in the Philippines 😢
I'd so like to visit the Philippines some day :)
"basic tools only" 1:09
collin: this is basic for me
everyone: that's extreme for me
Thats what i was thinking too
It’s an angle grinder,.. £20 cheap one from Argos
lalala so true
You could use a metal saw
Lol
11:50, Colin; I like things to be neat.
...Drives into a dirty lake with a screw tank
m.ua-cam.com/video/beY43TYC-tM/v-deo.html
Different use of the word " neat"
Just finished mine, loads of fun! Thank you!
Colin: ‘makes literally the same project multiple times’
Audience: ‘Shows the same enthusiasm every time’
By way keep up the good work it’s good with some entertainment in these times!
Nearly at 10 mil, stop reading the comments for a second and make sure U’ve hammered the sub button.
@Elevator Music What the hell is that supposed to mean?
Good job cropping the Kurzgesagt logo, Can’t you be more original?
2 minutes after uploading the film:
awesome wideo!
That's because the video is awesome from the beginning
I’m so glad I found this channel
Me thinking omg this must've been so hard to learn and understand everything about your projects
Colin: *No Education in engineering* I did plumbing
yeah, a lot of people think engineers are practical people . . . many are; but if you want something invented and made, get a tradesperson: Mechanical-Fitter-Machinists in particular have the skills in these videos.
Someone else recognized his nice Hand xD 2:02
What the f... Holy sh... Why didn't he use his real hand? I am confused.
He does it in heaps of videos.
It's a secret running joke. It's fun to visit his past videos looking for the fake hand shot!
I didn’t even notice that
Nope
Colin: "The seat, now I did two methods for mounting the seat. I used a connector on one side and on the other side I used a bolt that went straight up with a nut on top...." Said whilst sitting on said seat..
Yep, the seats certainly got a nut on top :D
Newest fan here in L.A. My kids are I are stoked to build your Drift Bike with basic tools. That said, we need to run an electric motor in this bad boy so I'm attempting to map out a mash-up of this bolt together bike with your electric bike. Keep making rad stuff!
9:17 Make it 1 meter wide, throw in some headlights and blinkers and it will be a street legal moped.
@Shambles1980TRealOne depends on where you live, its legal here
@Shambles1980TRealOne not really. there are many variables in anything and every thing. you cant be certain. saying thats true for almost anything is probably untrue
He is easily becoming one of my favorite UA-camrs very inspiring content I just might try one for myself
wut,a youtuber😂
On the king of random like 5 years ago, Grant made a "poor man's welder" and i think u should try to make it
R.I.P.
PARACRAFT! ! That’s really interesting
I love TKOR :(
that is a really nice idea for furze to make .. lets share and like that idea
@@futuromc the problem is that the welder he made requires skills with stick welding before you can weld with that one, honestly go to your local maker space or prep everything and go to you local welding shop and they will do it for cheap or free
I like that this shows how innovation can't stop someone with a goal. Too often I hear people make excuses as to why they can't do things (typically for lack of resources). Clearly they aren't trying/thinking hard enough.