@@electron1012 I thought that too... Especially when the air-compressor came on while they were putting the first one on, with the speed increase on the video I thought they were doing the Big-Rig horn on purpose... Then I realized, Air tools, so ... Air compressor LOL!
Witam i pozdrawiam!!Super motocykl trojkolowy zbudowaany wlasnymi rekami,duza wiedza z tej dziedziny,frajda z jego zbudowania i zlozenia,prawdziwy majstersztyk,swietny material filmowy ,tak trzymac!!
Freaking bad A$$. Beautiful look. I need to build one now. I'm currently building my 6year old an old 70s go kart restoration. I think one of these is next. Good work man.
I am only watching this because I watched colinfurze built one than I wanted to build one and the engine in this is the one that I am using. (I wanted to know how strong it was)
I imagine there are not as many likes as some people think there should be maybe because people like myself sort of hope we are about to watch a vid of something we could do at home ? Then we see this guy with great skills and all the materials making an amazingly cool toy we have no chance in hell of making at home,let alone afford to pay for if he was selling them. From that perspective a bit of a disappointment.Don’t get me wrong it’s a great thing you have built. Just my thoughts on someone else’s thoughts/question.
I really want to build something like this but don't have something to cut the metal or to weld. What cutter did you use? I can buy the cutter and have my cousin who is a welder do the welding for me
my friend, I have a problem. I have also built one. but at the start it is not good. I probably want a big rear gear. What is the diameter of the rear gear for you?logically, you have a start, but you probably don't have top speed
What is the make of the motor and how much speed does it have, please? I'm trying to find a motor here in Peru but I can't find it. Thank you very much for your help.
Where do you find the square framing metal like that? I'm building my own setup and have been using scrap pieces from other junked gokarts. It'd be nice to have a fresh start rather all used pieces that I sand blast. Takes forever.
Would you be inclined to make a video about what makes a good drift trike like tire width or axle length and specifically front tire size and width and what difference they make thanks for your time
@@cutweldbuild7528 Then FAIR PLAY, BIG RESPECT TO JUST GETTING ON WITH IT AND BEING ABLE TO PIECE ALL THE DIFFERENT AREAS TOGETHER.. I'd love to do something like that... 😀 so Awsome. NICE 1
Looks great . Love the fact you made mud guards for the tires but never bothered with a chain guard lol
The mud guards really stood out. Like a rig
@@electron1012 I thought that too... Especially when the air-compressor came on while they were putting the first one on, with the speed increase on the video I thought they were doing the Big-Rig horn on purpose... Then I realized, Air tools, so ... Air compressor LOL!
thatsxbecause mud gets in your eyes but chains rarely do.
Blue on blue racing make your own and put a chain gaurd on it
low probability of chopping your fingers off is far less concerning than very high probability of getting mud in your hair
Witam i pozdrawiam!!Super motocykl trojkolowy zbudowaany wlasnymi rekami,duza wiedza z tej dziedziny,frajda z jego zbudowania i zlozenia,prawdziwy majstersztyk,swietny material filmowy ,tak trzymac!!
That is one of the coolest little machines I have ever seen.
Thank you!
Freaking bad A$$. Beautiful look. I need to build one now. I'm currently building my 6year old an old 70s go kart restoration. I think one of these is next. Good work man.
That's a whole world of fun. Thanks for sharing.
Like my daddy always said "measure once weld once" 😂
Measure twice cut once
anief riley like I always say guess the Kuwaiti weld her to fit
@@crazywormy5869 for real
we must of had different fathers
my grandfather, in Russia, always said "measure seven times, cut once", but I did not listen to him :(
I felt like I was building with you. Really well shot and edited.
Now that looks like Soo much fun I would spent all my time drifting around!!!!phucken awesome build nice job keep drifting bro!!
thank you
Man these Chipmunks got some skills man!
Nice build. Zero BS. Thats what I like.
Вообще дрифт трайк для асфальта! По грунтовке впервые вижу! Наезднику респект там от тряски зубы повылетать могут!
That's exactly what I was thinking!
Лесно се преобръща на асфалт.
That is so danm bad ass!! Great job man!! I want one now lol lot better then my Dukes of Hazzard big wheel i had as a kid haha
nice it slides like a beast
1:21 Sounds like the furnace in old school runescape haha
This frame can handle a BoostedBusa engine ... Overkill ... Good job
That woudl be awesome
can i get the measurements for everything please.
I've gotta do a school project in metal and this is really cool.
That was friggin sweet. Thanks for the build vid.
killer build !! looks fun as hell.
I enjoyed watch these guys build things from scratch.
Really cool build!!!!👍
You have plans... or just make it up as you went? If plans where can we get some? thanks. Really, really cool!
just came up with it as i went
Would really like to know the measurements of each cut
Awesome project!!!!. Next one do a shop compressor silencer cabinet!.... subscribed!!!!
Lol
Wtf even is that
Out of all the mig welders I've seen has the right technique
i subbed awesome work hope u make more vids
thank you
AWESOME BUILD. Duuuude
Really cool and simple trike. Any way we could get some basic measurements on your tubing lengths?
I came up with this idea back in 1970 and it was from a go kart rear end and a bike front wheel. nice to see someone make this fun things!
Looks fun as sh*t, feel like building sumpin similar...definitely wouldn't be as good as this tho!! Good job bro!
Bravo champion rien a dire un vrai
How much did you run out of budget for this drift trike?
Well young man your a extremely good metal building man
thank you!
Do you have problems with this 1 inch headset? I have an old BMX with 1 inch headset and don't know if it will hold up
Great build ! can you put a list of the parts need it to build it thanks bro
Definitely a build Colin Furze would be proud of, Hope you're wearing you safety tie!
I am only watching this because I watched colinfurze built one than I wanted to build one and the engine in this is the one that I am using. (I wanted to know how strong it was)
Where can I purchase one?? Nice ride!!
Cara que projeto irado ficou muito bom fantástico
Love it...minus the amputee foot pegs on the front tire!🦵 Why the gymkhana brake on the right side?
I imagine there are not as many likes as some people think there should be maybe because people like myself sort of hope we are about to watch a vid of something we could do at home ? Then we see this guy with great skills and all the materials making an amazingly cool toy we have no chance in hell of making at home,let alone afford to pay for if he was selling them. From that perspective a bit of a disappointment.Don’t get me wrong it’s a great thing you have built. Just my thoughts on someone else’s thoughts/question.
I really want to build something like this but don't have something to cut the metal or to weld. What cutter did you use? I can buy the cutter and have my cousin who is a welder do the welding for me
Honestly that looks like so much fun I'm going to get out the everlast welder and start making one for myself.
Awesome what everlast do you have?
Excelent work great job
Cool music! 🤟
How did you not have more views and subs you throw out cool custom stuff!
That music though 💪
BAD ASS MAN!!! Love your builds keep it up!
Bro is insane I like it
my friend, I have a problem. I have also built one. but at the start it is not good. I probably want a big rear gear. What is the diameter of the rear gear for you?logically, you have a start, but you probably don't have top speed
Hi I wanna build a trike too..... Just for fun with friends..!! Which engine should I get?? 200cc 4stroke? Or 250cc....?
where do you get those bearings at i can only find cheap pillow blocks
That looks heavy af
I liked it, very practical and useful.
What size rectangular tubing did you use including thickness. It's a nice design and I like how you fabricated you fender flares as well nice touch.
Looks like 1" x 2"
Nice build! You’ll have a lot more fun and WAY less dangerous if you throw on some pvc on those rear tires.
Yeah I never thought about it but pvc would be way less expensive than buying them online thanks for the tip!
Bien hecho 👌👌
That thing is pretty sick👍
The octagon pieces are 22.5? But what's the length on the lower frame and neck risers
What is the make of the motor and how much speed does it have, please? I'm trying to find a motor here in Peru but I can't find it. Thank you very much for your help.
how many degrees do the cuts to make the octagon I wait for your response
22.5
hello and good job for this project
what is the size of weels and the size of tires that you are using in this project I wait for your response
What motor did you put in that thing?
What the metal instrumental with the killer leads?
Awesome build. I would suggest carriage bolts for the seat to be more comfortable or tie a patio chair cushion to the seat.
Thank you!
Awesome as good job 👍
How did he connect the throttle to the carb
Is that 2"x3" 11ga tube?or 1x2
Hi can I use part of your video to my compilation homemade inventions ?
if you credit my channel
ok Thank You
@@cutweldbuild7528 what are the measurements
dunno just random
Nice mig welds!
good morning, i would like to know the measurements, i loved the project!
buenos días, me gustaría saber las medidas, ¡me encantó el proyecto!
Hey man what do you think of this engine versus a used 125cc lifan for about the same price?
go with a predator there great
Everyone needs one of these lol
melhor de todos!!
Where do you find the square framing metal like that? I'm building my own setup and have been using scrap pieces from other junked gokarts. It'd be nice to have a fresh start rather all used pieces that I sand blast. Takes forever.
Metal supply
Hey there guys, where can I get that kind of engine? And how fast at them? Can I buy it from Amazon?
It's a predator 212, you can get the at harbor freight for 100$, you can also buy them online
And the speed greatly depends on the gear ratio you go with...
Andrew Mortellaro Sr. bcsb
c
popp
you can buy it from here or > or >
Do you need a license for this if you try to use it as a daily transport?
excelente muy bueno felicitaciones
Looks more polished than Mr Colin Furze's build. 👍
True but Colin's actually drifted on tarmac not on dirt with oiled tyres! Plus he set out to make it with only basic tools, no welding etc.
Hola..te quedo re lindo
what is your total investment for this build??? it would be nice to see that...
around $500
Good job, but do you have clutch in the engine ..?
Centrifugal clutch
@@cutweldbuild7528 okay
What size and brand motor did you use on this? Where did you source it?
It says predator 212 you fucking idiot
It is a predator 212cc 6,5 hp , you can buy it from here or > or >
Como sujetas el eje para quedarlo fijo y no se valla??
Would you be inclined to make a video about what makes a good drift trike like tire width or axle length and specifically front tire size and width and what difference they make thanks for your time
I want one..
Did Colin furze inspire?
nope
@@cutweldbuild7528
Then FAIR PLAY, BIG RESPECT TO JUST GETTING ON WITH IT AND BEING ABLE TO PIECE ALL THE DIFFERENT AREAS TOGETHER..
I'd love to do something like that...
😀 so Awsome. NICE 1
thank you
What's a good replacement for a front tire instead of the original bike tire
Fat bike tire
No entiendo ni jota de lo que dicen en los comentarios jajaja pero esta muy bueno el triciclo
Hey, where can I find the rear axle and gears?
Amazon has just about everything
Скажи а на продажу такой сделаешь? Сколько стоить будет?
Need measurements and parts list... I would love to build one
Top das galáxias
Здравствуйте, какие чертежи нужны для сварки
3:35 them bearings like god help me
Kreatif tenan Kowe bro...
Where did you find that seat?? Beautiful build man. Really well thought out plans.
how thin is the axle
This is super COOL...😎
Thank you
Amil Hasan I agree
Good job
Great welding skill!
What kind of metal did you use?
1x2 rectangular tubing .125 wall
Прикольная тачка 😀👍👍👍