Dji Avata & Gyroflow | How to stabilize in post

Поділитися
Вставка
  • Опубліковано 13 гру 2024

КОМЕНТАРІ • 209

  • @OriginaldoBo
    @OriginaldoBo  2 роки тому +11

    you can now download Gyroflow 1.2 here gyroflow.xyz/ Gyroflow is absolutely free so definitely support these devs and their mission

    • @DavidFaxon
      @DavidFaxon 2 роки тому

      I cannot get Gyroflow to work. It's saying no motion data is detected, but I has rocksteady off and I did not have horizon on, so there was no stabilization. Any tips?

    • @AldoGarcia86
      @AldoGarcia86 2 роки тому

      This also applies to the air unit 3 now! Just tested and it contains all the gyro data

  • @skycam-maidnehead
    @skycam-maidnehead Рік тому +2

    Short and to the point, your explainers have guided me through getting started with FPV better than anything else out there. Thank you man!

  • @roro6064
    @roro6064 2 роки тому +36

    Dude is the first one to post all this avata content🤣 I gotta subscribe, just out of respect of the hard work he’s putting in.

    • @OriginaldoBo
      @OriginaldoBo  2 роки тому +4

      appreciate ya!

    • @nhbjhbbhbhgvb
      @nhbjhbbhbhgvb 2 роки тому +1

      He brings the most value per video by far of any UA-camr I know

    • @BojanKordic
      @BojanKordic 2 роки тому +1

      Exactly my thought! Big respect!

    • @rcrdps8144
      @rcrdps8144 2 роки тому

      True,... especially considering I bought one. Subscribed!

    • @djonegloveTV
      @djonegloveTV 2 роки тому +1

      Big respect !

  • @canyonblue737-8
    @canyonblue737-8 2 роки тому +1

    You are killing your lineup of videos on the launch of this product... not only first to cover some topics like this but also most in-depth and I've seen them all. Congrats.

  • @TriniWeekes
    @TriniWeekes 2 роки тому +3

    Keep crunching the avata content bro, enjoying them all

  • @seb-depp
    @seb-depp 2 роки тому +5

    Very cool.
    How much does the switch from Ultra to Wide crop in?

  • @AirKhanFPV
    @AirKhanFPV 2 роки тому +9

    Thanks for the infos, i really hope really they add 4:3 ultrawide 4k with gyro data i mean at least the ultrawide setting with gyro data the whole gyroflow stabilization depends on cropping the imagine in order how the gyro was acting but with a already cropped imagine its really awful we need the full sensor image (4:3)+ultrawide that contains gyro data DJI please make it possible! We also need that gyro data output for the Action 2 for the 4K 4:3 setting.. 😍

    • @Q3D
      @Q3D 2 роки тому

      +1

  • @ianclark3780
    @ianclark3780 Рік тому +1

    Great tutorial. Having flown P4P and MINI2 drones, I got my Avata a few days back. Decided straight up to go for Gyroflow as opposed to EIS. One thing I must advise on. There needs to be a warning. Do not be playing music loudly through good headphones because the minute that render and export finishes, you're getting the bejeezus scared out of you by the completion notification sound 🤣🤣🤣

  • @Siemianek7
    @Siemianek7 Рік тому

    I’m so happy that I’m find your videos about Avata ! You makes everything much easier for someone who just start adventure with that drone . Absolutely love it 👏 I’m stay with you man 🫡😁

  • @dhrubaghy
    @dhrubaghy Рік тому +1

    Even after FOV ' WIDE ' and EIS 'OFF' I am not getting gyro data...... any suggestion please? Can Slow Memory card be a cause of it ?

  • @MentorMel
    @MentorMel 6 місяців тому

    Thank you for posting this! I'm excited to see all that I can come up with using your tips. Wishing you the best!

  • @dkieng
    @dkieng 2 роки тому +1

    Do you need add sync point and lens profile with Avata video? Thanks

  • @EricScottGoldstein
    @EricScottGoldstein 2 роки тому +1

    I've followed your instructions and loaded the file into Gyroflow and it's asking me for a lens profile. Do you have a default lens profile that I can use?

    • @pacificnwaerialviews
      @pacificnwaerialviews 2 роки тому +2

      Did you figure this out? Trying to search for the answer, thanks.

  • @EliteAtlantaHomes
    @EliteAtlantaHomes 3 місяці тому

    Great video, do you use gyroflow for your Sony real estate shots to get them super smooth?

  • @edsonrodriguez4143
    @edsonrodriguez4143 5 місяців тому

    Hi, how are you?
    I wanted to ask you a question. I have a DJI Avata 2, and I’m filming with this configuration:
    • Stabilization deactivated (RockSteady and HorizonSteady turned off)
    • Wide Angle
    Other than that, I always film in Normal or Sport Mode. Brightness, ISO, and all those characteristics I leave on automatic.
    But when I import the video into Gyroflow, it always tells me that it can’t find the “Lens Profile.”
    (This happens to me both in the app and on the MacBook. I have already updated the Gyroflow app on both, but it still does the same thing. What can I do?)

  • @DR.ONER___
    @DR.ONER___ Рік тому

    Firstly, thanks for these videos… you are very helpful.
    Can I ask about the order of things?…
    I film
    I then edit the clip in Final Cut
    I add my Lut’s
    I open gyroflow
    I find the video
    I do what you just said???
    Then I export where?
    Also does gyroflow change the speed of the clip?

  • @westmichiganaerials2205
    @westmichiganaerials2205 2 роки тому +1

    "Today's video..." don't you mean "this hour's video..."? Hahaha! Hard work pays off, bro!

  • @clydedigital
    @clydedigital Рік тому

    Great demo, thanks. Do you have any videos that show before and after??

  • @LifeOfJamesy
    @LifeOfJamesy 6 місяців тому

    Do you use gyroflow before editing dlog footage, or edit/colour grade first then usr gyroflow?

  • @dmendex
    @dmendex Рік тому

    I did this with the video file saved on the goggles and it didn't work. I assume we have to use the file saved from the Avata?

  • @FPVJohn
    @FPVJohn 7 місяців тому

    Nice explanation and video! What happens if we accidentaly record in ultra wide and EIS off? Is there a way to stabilize this? I mean in some other program etc... Thanks!

  • @DezanHernandezProductions213

    I did these settings and still no gyro flow, do I have a bad unit?

  • @maruanbukowitz2461
    @maruanbukowitz2461 3 місяці тому

    I recorded my video with no stabilization but after I check my files I realized that the Avata 2 has slipped my video in two parts... Now when I stabilize my video I have to do this in two parts.. and then when I put both files together on da Vinci they have different frames scale ... Wich is terrible... What do I need to do to solve this issue ?

  • @raven6studios
    @raven6studios Рік тому

    How do you get the program to run at a certain speed without it going into slow-motion mode here and there? I'd like to see a consistent speed all the way through the final render. Thanks for the video!

  • @DavidBesnette
    @DavidBesnette 2 роки тому +1

    This is working great - the only "error" is that it asks for a lens profile for the Avata in Gyroflow - is there one that should be picked from the dropdown? Or should this load automatically. Great video!

    • @MrUnevik
      @MrUnevik Рік тому +1

      looking for this too, in the video it says dji fc8183 but i cannot find that lensprofile anywhere?

    • @EdyDevito
      @EdyDevito 4 години тому

      @@MrUnevik same problem here! Still looking for it. U got it, please? Anyone?

  • @vicious_pictures
    @vicious_pictures 2 роки тому

    Hey hive mind. When I batch export my Avata footage form gyroflow it comes out at like 3.6 frames per second. It says the export settings are h.265 59.940fps so idk whats going on. I have tpo speed it up 1500% afterwards so annoying.

  • @formula1sblog-798
    @formula1sblog-798 2 роки тому +3

    Can you do this on the older DJI fpv? That would be awesome! Brilliant content btw man 👍🏻

    • @beatsandstuff
      @beatsandstuff 2 роки тому +1

      nope, no gyro data from it :(

    • @MRsaerdnagnal
      @MRsaerdnagnal 2 роки тому

      That would be awesome!!!
      Isn't it just a software upgrade on the avata? 🤔
      Do you think, that this will come to the dji fpv too?
      Thanks for the great content!👍

    • @beatsandstuff
      @beatsandstuff 2 роки тому +1

      @@MRsaerdnagnal no gyro data on the fvp... It wont have it in the future, gyro is new on the avata, i think it is a hardware module, not something a firmware update can fix.

    • @MRsaerdnagnal
      @MRsaerdnagnal 2 роки тому

      @@beatsandstuff thank you for that information. 👍

  • @MlleVB
    @MlleVB Місяць тому

    Why the untrimmed part of the video is black when exported? So the lengths of video is not cutted out
    It should cut away the not activated part

  • @plasticjoe26
    @plasticjoe26 2 роки тому +1

    If you have problems getting gyro data to record, and you are set to EIS off and Wide and it's still not working... try this ....
    Figured it out... all in one pack
    1. Took off in EIS off - Wide , Landed
    2. Took off in Rocksteady - Wide , Landed
    3. Took off in Horizon Stabilization - wide , Landed
    4. Took off in EIS off - Wide , landed
    and ever since it's recorded Gyro Data

  • @ImpactPhoto
    @ImpactPhoto 2 роки тому

    After watching this video, I'm sold. How good are the low light capabilities for RE Interior? Would I be better off throwing a GoPro on top for that scenario? I'm really curious to see what some interior footage looks like.

  • @LarkinFilmz
    @LarkinFilmz 11 місяців тому

    Having such a hard time with this I have my fov at wide and rocksteady off then put it in Gyroflow and still no gyro data I’m super stuck it’s all up to date I’ve tried many many times please help this is on the DJI avata

  • @bsmrodeo
    @bsmrodeo Рік тому

    Always learning from you!! Thanks!!

  • @gilsadewa
    @gilsadewa 2 роки тому +1

    Is DJI Avata restricted by no fly zone like other Mavic series?

  • @Pasxos100d
    @Pasxos100d 2 роки тому

    Thanks for all the info man !! Quick question. Do I have to shoot in 4:3 (like the GoPro on Reelsteady) or will the 16:9 do the job ?

  • @sprayhood1
    @sprayhood1 2 роки тому

    hey mate I have eis of and fov on wide. and it still not possible. also its on cine colors style . any idea to fix that?

  • @duercos1
    @duercos1 Рік тому

    Do you color grade and adjust portions of your video for speed and other effects first, or is it done after the Gyroflow stabilization?
    Also, what is your preferred export setting? Thanks!
    I'm recording in D-cinelike.

  • @Fabsxh
    @Fabsxh 6 місяців тому

    Hello, I have the problem when I use nd filter and gzroflow then the whole video is out of focus and from time to time jump the mountains 😅 does anyone have help?

  • @QuanTranVisuals
    @QuanTranVisuals 7 місяців тому

    Wow, this is very useful tutorial. Thanks. Liked and subbed.

  • @marcusaderele3977
    @marcusaderele3977 Рік тому

    Hey I found this video very helpful, however I am noticing my completed/exported video lags hard at certain points of the clip. I have tried exporting in Pro res and H265 & I've also tried the previous Gyroflow version, but no solution compared to the smooth video I see on Gyroflow pre-export. Any tips? Wondering if it has to do with the 10 bit?

  • @airbnbphotography
    @airbnbphotography 2 роки тому

    what about the other option in avata menu I think its the horizontal stabilization ?

  • @craigdavo
    @craigdavo Рік тому

    Sweet video and footage! Was the Avata flown in M for this video?

  • @SebastienRediconmediaDevaux
    @SebastienRediconmediaDevaux 2 роки тому

    Is it possible to export a 60fps footage in 30fps ?

  • @stevebottkol2970
    @stevebottkol2970 2 роки тому

    What camera profile are you using for the avata?

  • @VPStudioIII
    @VPStudioIII 2 роки тому

    Great vids! What is the SW to join or merge 2 videos from avata for gyroflow?

  • @twzted_synapse221
    @twzted_synapse221 9 місяців тому

    A few questions, if you dont mind. 1) I usually do all my editing in Final cut Pro. Should I use Gyro Flow before or after my editing in FCP? 2) Do I have to input any video or lens profiles, or does Gyro Flow just recognize the Avata? 3)How to stitch multiple files together to work on all clips at once?

    • @OriginaldoBo
      @OriginaldoBo  9 місяців тому

      Gyroflow is good now you don’t need profiles

    • @twzted_synapse221
      @twzted_synapse221 9 місяців тому

      Thanks. But what about my other two questions? If you don’t mind.

  • @joebolton6768
    @joebolton6768 Рік тому

    hey whatup buddy my avata doesnt have the option for EIS

  • @DroningaboutIreland
    @DroningaboutIreland 2 роки тому +1

    Stupid question but how do I download Gyroflow on my Mac?

    • @OriginaldoBo
      @OriginaldoBo  2 роки тому +2

      Go to the website and download the dmg package they have

    • @DroningaboutIreland
      @DroningaboutIreland 2 роки тому +1

      @@OriginaldoBo found it, cheers Ken

  • @ArtCoDroneAndEntertianment
    @ArtCoDroneAndEntertianment 2 роки тому

    Hey Ken thanks for the info on Gyroflow.

  • @ah64adsweetness95
    @ah64adsweetness95 Рік тому

    Dobo, what lens profile do you use for your Avata with gyro flow? Thanks Rex

    • @OriginaldoBo
      @OriginaldoBo  Рік тому

      Wide its the only one that will work

    • @ah64adsweetness95
      @ah64adsweetness95 Рік тому

      @@OriginaldoBo the dii FPV? I didn't see Avata listed....

    • @ah64adsweetness95
      @ah64adsweetness95 Рік тому

      Bought my mini 3 pro from Zac, I'm a retired AH64 Apache Pilot., combat in Afghanistan in 2003

  • @junebugpetty7386
    @junebugpetty7386 2 роки тому

    Does the quad have NFZ like all the other DJI quads?

  • @JefeDog
    @JefeDog Рік тому

    Unfortunately, it won't let me use Gyroflow, as it says I have to have the paid version of Davinci Resolve in order to allow external scripts.

  • @BubbyFPV
    @BubbyFPV 2 роки тому

    Thx for this video saved me a lot of time!

  • @alfredocuello2795
    @alfredocuello2795 2 роки тому

    Can you compare Avata 8bit vs Mini pro 3 or Mavic 3 10Bit video recording for color grading?

  • @arkadiuszarek9902
    @arkadiuszarek9902 2 роки тому +2

    range test, please

    • @OriginaldoBo
      @OriginaldoBo  2 роки тому

      thats a complicated one since its not meant for high far flights

  • @bradfpv67
    @bradfpv67 2 роки тому

    Thanks for your uploading video about stablization. I also downloaded gyroflow ver.1.2 . but there is no camera lens imformation for dji avata. So when I load my video clip on the program, there is orange sign and stablization doesn`t work. where is avata lens information? and How can I get it?

  • @epicdroneworks3898
    @epicdroneworks3898 2 роки тому

    Hey Ken, I have been stabilizing my avata with gyroflow in wide fov and its working fairly well, however Id really like to be able to stabilize the ultrawide mode using another device to record the gyro data, I have a naked hero 11 strapped to the top with your bad idea mount and am wondering if I can import the gyro data from that? I am not very experienced with Gyroflow but I would imagine there would be a ton of people wanting to do this. Any help would be appreciated. Thanks

    • @OriginaldoBo
      @OriginaldoBo  2 роки тому

      You can use a logger to capture the gyro info but at that point use a naked gopro

  • @retributionbydrone
    @retributionbydrone Рік тому

    do you recommend stabilizing the vid with gyroflow before or after editing in adobe premiere pro for example?

    • @OriginaldoBo
      @OriginaldoBo  Рік тому

      You cannot stabilize after you have to before

  • @bartlomiejkaczynski8859
    @bartlomiejkaczynski8859 6 днів тому

    Hi. You first colorgrade footage or you first use gyroflow?

  • @gioblackmusic
    @gioblackmusic Рік тому

    What is up guys ! im using the avata and everytime i upload a video clip i always get no motion detected ! can you help me out please !

  • @andyescapes
    @andyescapes 2 роки тому

    Can you not film 4:3 on the avata for better stabilisation?

    • @OriginaldoBo
      @OriginaldoBo  2 роки тому

      No

    • @andyescapes
      @andyescapes 2 роки тому

      @@OriginaldoBo dang no 4:3 recording options at all? :(

    • @AdrianEddy
      @AdrianEddy 2 роки тому

      @@andyescapes there's actually a 2.7k60 4:3 mode

  • @sumitbhandari1207
    @sumitbhandari1207 Рік тому

    Can someone tell the installation process for new m2 mac davinci plugin? Tried several times but it doesnt show up in resolve

  • @tobiasberghaus667
    @tobiasberghaus667 2 роки тому

    Hey, thanks for the Video! Can Gyroflow also be used with footage filmed in normal/sports mode? Or only with full acro footage?

  • @donovanw.2943
    @donovanw.2943 2 роки тому

    Thanks for the info. So far, my PC won't let me install Gyroflow without lots of warnings from my virus software. Hopefully I'll figure it out.

  • @MicroFourNerds
    @MicroFourNerds 2 роки тому

    I can’t get this to work at all it just says no gyro data. All my settings are correct 😭

    • @OriginaldoBo
      @OriginaldoBo  2 роки тому

      What are the settings you have set and what version of gyro flow

    • @MicroFourNerds
      @MicroFourNerds 2 роки тому

      @@OriginaldoBo 1.2 gyroflow, wide, eis all off. 4k 60p, auto settings, cine like D.
      Any help would be appreciated! 🙏

    • @MicroFourNerds
      @MicroFourNerds 2 роки тому

      @@OriginaldoBo also I've just noticed my codec is HEVC and yet yours is H264... i wonder if there's a difference there

    • @plasticjoe26
      @plasticjoe26 2 роки тому

      Figured it out... all in one pack
      1. Took off in EIS off - Wide , Landed
      2. Took off in Rocksteady - Wide , Landed
      3. Took off in Horizon Stabilization - wide , Landed
      4. Took off in EIS off - Wide , landed
      and ever since it's recorded Gyro Data

  • @dronelabfilms
    @dronelabfilms Рік тому

    im in ! thanks for the info subscribed

  • @gonzafpv2843
    @gonzafpv2843 2 роки тому

    Hello originaldobo! Have a question, this drone could work for small business videos? Greetings from Uruguay! Thanks for all your work!

    • @EthanMitchell_YouTube
      @EthanMitchell_YouTube 2 роки тому +1

      Yes! The camera is really good. You can even put his gopro mount on it.

  • @Emdrone1
    @Emdrone1 Рік тому

    Much apprectiated! thanks for the info...

  • @Lergin117
    @Lergin117 Рік тому

    Just got my hands on the DJI Avata, while using gyroflow to make my clips look cleaner I noticed that there is no lens profile for my Avatas model. I built my own profile but I don't think I've done it exactly right. I'm not receiving any errors, but the clips appear unchanged. Plus Horizon lock has yet to work for me. Does anyone have any suggestions for me?

    • @OriginaldoBo
      @OriginaldoBo  Рік тому +1

      The Avata doesn’t require a lens profile. If you film in wide with stab off gyro flow will handle the rest

    • @Lergin117
      @Lergin117 Рік тому

      @@OriginaldoBo Awesome thank you! And thanks for the response! It seems like I do have those settings correct. Although I believe I have been saving my recordings onto my FPV headset instead of saving them using the drone. (My SD card was in my headset instead of the drone). Any chance that might be part of my issue?

  • @yensysaerialimaging3523
    @yensysaerialimaging3523 2 роки тому

    possibly stupid question.. but trying out the gyroflow ap, its calling for a lens profile but cant seem to figure out how to fix that (orange bar on the top of the screen) thanks man

    • @OriginaldoBo
      @OriginaldoBo  2 роки тому

      Make sure you have the latest version

    • @jacobmckee2741
      @jacobmckee2741 2 роки тому

      @@OriginaldoBo Hey man! I appreciate all your help so far. I'm having this same issue but can't figure out a fix. I'm using GyroFlow V1.2.0, I have EIS set to OFF, and I have my field of view set to WIDE but when I load the footage into GyroFlow it still says a lens profile is not loaded. Any other ideas? Thanks!

    • @yensysaerialimaging3523
      @yensysaerialimaging3523 2 роки тому

      @@OriginaldoBo i think it is.. the version 1.2.0

    • @DavidFaxon
      @DavidFaxon 2 роки тому

      ​@@yensysaerialimaging3523 Have you found a fix? It says no motion data found, but I had EIS off as well.

    • @yensysaerialimaging3523
      @yensysaerialimaging3523 2 роки тому +1

      @@DavidFaxon I finally figured it out.. EIS off and make sure you are on just Wide ... not ultra wide..

  • @culturpei1255
    @culturpei1255 2 роки тому

    very nice video but i try to film on avata on 2.7 k 4/3 and when i put my video on gyroflow the video stay on 4/3 do you know how i can do to switch on 16/9 on gyroflow.?

    • @YorkyPoo_UAV
      @YorkyPoo_UAV Рік тому

      On the right side you select the export size or you can change it in Davinci

  • @michaelhabegger6672
    @michaelhabegger6672 9 місяців тому

    Accidentally left it on Ultra Wide and got the clip of a lifetime. Any ideas on fixing the Ultra Wide lens distortion and/or stabilizing in post without gyro data?

    • @OriginaldoBo
      @OriginaldoBo  9 місяців тому +1

      Depends on what software some have corrections

    • @michaelhabegger6672
      @michaelhabegger6672 9 місяців тому

      @@OriginaldoBo Using Adobe. Was able to do some After Effects stabilization and the basic Premiere lens distortion fix. Definitely not perfect but enough to keep it from being a complete waste of a clip

  • @orozcocris93
    @orozcocris93 Рік тому

    does the fpv model have gyro information?

  • @Carsonous
    @Carsonous 2 роки тому

    Thank you so much for this. Subscribed!

  • @Davidlahner
    @Davidlahner 2 роки тому

    Have EIS off and wide but comes : file format was detected, but no motion data was found ? Pls help

    • @OriginaldoBo
      @OriginaldoBo  2 роки тому +1

      Are you in Fort by three. Also please make sure you have the latest version of Gyro flow installed

    • @plasticjoe26
      @plasticjoe26 2 роки тому

      Figured it out... all in one pack
      1. Took off in EIS off - Wide , Landed
      2. Took off in Rocksteady - Wide , Landed
      3. Took off in Horizon Stabilization - wide , Landed
      4. Took off in EIS off - Wide , landed
      and ever since it's recorded Gyro Data

  • @MANOLET
    @MANOLET 2 роки тому

    Followed the steps but still didn’t have gyro data. Gyroflow is on the latest as well. What could be the issue?

    • @OriginaldoBo
      @OriginaldoBo  2 роки тому

      Field of view set to Wide
      EIS off
      Make sure you have the latest gyro flow link in description

    • @MANOLET
      @MANOLET 2 роки тому

      @@OriginaldoBo that’s exactly what I did. I Watched this video before flying to make sure I did everything right. But somehow it still did not record a gyro data.

    • @pa3bca
      @pa3bca 2 роки тому

      @@MANOLET Same here. Latest version of Gyroflow and updated the Avate (via iPhone). EIS off and on wide (tried all modes, normal, wide, ultrawide. Nothing 😞
      Also I see you have a camera profile loaded. Where did you get that, I cannot find it in the list?

    • @NiSoKai
      @NiSoKai 2 роки тому

      @@pa3bca Same issues mentioned above here. Any resolve?

    • @pa3bca
      @pa3bca 2 роки тому +1

      @@NiSoKai Hi. Happy to say that I got it working. Possibly some user error? But let me explain what happened here, might be helpful. When I got the Avata 3 days after its release I connected all to my iPhone to set it up, it immediately came with a software update. Installed that.
      I was sure I had the latest update (as it updated AND features that are mentioned for the latest update like “reminder when the aircraft is in a low-power state“ I did see in the goggles.
      However just to check I powered everything up and connected it to my iPhone and the Fly app. Then I got into the apps’ menus and did a manual check for firmware update… and voila: another update. Maybe the first time it only updated the controller and not the drone?
      Anyway it now works, and I really like it..

  • @jrk098
    @jrk098 9 місяців тому

    Does it record gyro in non wide shooting format?

  • @belizemytravels
    @belizemytravels 2 роки тому

    Thanks for the vidoe!

  • @cncverticalmachining
    @cncverticalmachining Рік тому

    For some reason it keeps crashing when I export from gyroflow everything else is good it looks amazing pre export but soon as I click it crash I’m so frustrated I’ve tweaked settings still no luck

    • @OriginaldoBo
      @OriginaldoBo  Рік тому

      Depends on the OS you are on if you are on Mac make sure Gyroflow is the latest version

  • @lyftedmedia
    @lyftedmedia Рік тому

    First time gyro flow user here and when I export my Avata footage it crops the sides and I have these black spaces. Can anyone help?

    • @OriginaldoBo
      @OriginaldoBo  Рік тому

      You have to call your footage accordingly

  • @FalloutMediaHK
    @FalloutMediaHK 2 роки тому

    I downloaded Gyroflow v1.2 and followed the instructions but it still says "no motion data was found"

    • @FalloutMediaHK
      @FalloutMediaHK 2 роки тому +1

      Oops, had to update to latest AVATA firmware too

  • @outboxfpv4360
    @outboxfpv4360 Рік тому

    2.7 K 4:3 Wide hope it works fine?

  • @Bendyboy15
    @Bendyboy15 Рік тому

    Filter?

  • @Stevieboyfpv
    @Stevieboyfpv 2 роки тому

    Looks sweet with the gyroflow 👌 I've a ton of various size cinewhoops but the altitude hold is the draw for me on this for property and bussiness fly throughs and your other vid confirmed that one for me. I came straight to your vids to get that straight talk on this puppy think I'm sold as an addition to the fleet (expensive addition 😬) having not needed the original dji fpv drone. Lookimg forward to those 1080pn oled goggles! Come on djiake them backward compatible to the air an vista 🙏🏼🙏🏼🙏🏼 top vids man thanks🤟

  • @PrestonJensen
    @PrestonJensen 2 роки тому

    Is a full dive possible using the motion controller? I’m an FPV rookie. Seems like they are marketing this towards me.

    • @OriginaldoBo
      @OriginaldoBo  2 роки тому

      Negative

    • @PrestonJensen
      @PrestonJensen 2 роки тому

      @@OriginaldoBo bummer! How about with the regular controller not in full manual mode?

    • @rcrdps8144
      @rcrdps8144 2 роки тому +1

      @@PrestonJensen No. Normal and Sport modes are what FPV folks would call Angle or Stabilized mode. This keeps the drone upright at all times. You control direction and height. In Acro/Manual mode, you have complete control of drone attitude,...pun intended.

    • @PrestonJensen
      @PrestonJensen 2 роки тому

      @@rcrdps8144 thanks for the info!

  • @RealEstateTorontoPhotography
    @RealEstateTorontoPhotography 2 роки тому

    Thank you so much !

  • @MeshJedi
    @MeshJedi 2 роки тому

    Any chance dji will add gyro data do the fpv?

    • @OriginaldoBo
      @OriginaldoBo  2 роки тому

      it’s been over a year and they haven’t don’t think it’s a matter of if they will I just think it’s a matter of can they

  • @TheGraneable
    @TheGraneable 2 роки тому

    Can you do the same with the FPV drone ?

    • @Olsson1994
      @Olsson1994 2 роки тому

      Nope, the standard Fpv doesn’t record gyrodata

  • @AnemosFPV
    @AnemosFPV 2 роки тому

    Can you use real steady? As I alredy own it

  • @samvandillen
    @samvandillen 8 місяців тому

    How to export dlog stablized?

  • @lynsmith1096
    @lynsmith1096 2 роки тому

    Good tutorial Ken

  • @creativezonepng
    @creativezonepng Рік тому

    I can’t even file the Lens Profile for this. I can’t even use the software since

    • @OriginaldoBo
      @OriginaldoBo  Рік тому

      If the gyro is set you do not need a lens profile! Once it detects gyro no lens profile is needed

    • @creativezonepng
      @creativezonepng Рік тому

      @@OriginaldoBo Gyroflow cant find a lens profile and motion data even when I fly with EIS turn off and my field of view is wide. What am I missing here?

  • @mountainaddict000
    @mountainaddict000 2 роки тому

    can we do this with DJI FPV ?

    • @AdrianEddy
      @AdrianEddy 2 роки тому +2

      no, DJI FPV doesn't record gyro data

    • @MRsaerdnagnal
      @MRsaerdnagnal 2 роки тому

      @@AdrianEddy but why?
      Isn't it just an software upgrade? Like on the avata? 🤷‍♂️

    • @AdrianEddy
      @AdrianEddy 2 роки тому

      @@MRsaerdnagnal it's just DJI decision, they want to focus on new products

  • @MagicBiscuitShow
    @MagicBiscuitShow 2 роки тому

    Good info. Thanks. Looks pretty noisy, though.

  • @TheGadgetWhisperer
    @TheGadgetWhisperer 2 роки тому +1

    Dude! You are the best!
    Questions:
    1. Did you fly in manual mode?
    2. If we change FOV to WIDE, does it mean that the aspect ratio is 4:3?
    3. If we shoot in 4K and 4:3. Once stabilized, is the output still 4K or dropped to 2.7K?
    4. Is your mac using M1 Pro or M1 Max?
    Thanks buddy!
    Love from Indonesia 🇮🇩🫡

    • @OriginaldoBo
      @OriginaldoBo  2 роки тому +3

      Manual mode
      For gyro flow always set to wide and EIS off no 4:3
      I use a M1 MacBook 16 the non max version

    • @TheGadgetWhisperer
      @TheGadgetWhisperer 2 роки тому

      @@OriginaldoBo thanks buddy!

  • @managerofthenewportplumses301
    @managerofthenewportplumses301 2 роки тому +1

    Ken - circling back around the question I asked yesterday. Check out this clip on UA-cam for 22 Star Inland Drive in Miami for an amazing real estate one shot taken on a similar drone. Can you take some footage of the drone going from indoors to outdoors like shown in that video and speak about how you would make such controlled turns inside real estate as shown in that video. And also how does the footage come out when this drone flies inside of homes/buildings including ones that are not so well lit. I have been scouring UA-cam for such footage and content and coming up without much yet. You mentioned that was some in your review. video but I can't seem to find that - so can you specify where it is or do a video dedicated to this topic as I am sure it will be a huge hit with many views for you. Thank. you always for the great content!

    • @bugsy742
      @bugsy742 2 роки тому

      He’s definitely got a whole section of footage in these last few vids bro because I binged watched em all last night 😅👍
      Sorry I can’t help with which one but it’s definitely there mate 🤘

    • @managerofthenewportplumses301
      @managerofthenewportplumses301 2 роки тому +2

      @@bugsy742 - I have ordered the drone and been bin watching as well. I will go back and check his vids out because I definitely want to hear about the lowlight and using this video for real estate interior footage. Continue to believe that a video dedicated to how this drone will work for such a workflow of real estate videography will crush it!

    • @bugsy742
      @bugsy742 2 роки тому

      @@managerofthenewportplumses301 absolutely agree mate 😃🤘👍

    • @bugsy742
      @bugsy742 2 роки тому

      @@managerofthenewportplumses301 did you see the bumpers he’s already made? 😎

    • @managerofthenewportplumses301
      @managerofthenewportplumses301 2 роки тому +1

      @@bugsy742 -
      Found it! It was under the camera section in the long review.

  • @crow1fpv
    @crow1fpv 2 роки тому

    and the dji action 2 still has no gyro data...

  • @FlyWithMe_E1000
    @FlyWithMe_E1000 8 місяців тому

    Thanks for the video, but I still don’t understand the point of stabilizing the video like that - in the end the video looks like it shoot with Mavic series )) All stabilized ))

    • @FlyWithMe_E1000
      @FlyWithMe_E1000 8 місяців тому

      From your final video - I would not be able to understand that you shoot it using AVATA )) because its looks like my Mavic Mini 4 shoots )))

  • @tuandungtruong4116
    @tuandungtruong4116 2 роки тому +1

    Do not see gyro data in gyroflow

    • @OriginaldoBo
      @OriginaldoBo  2 роки тому +1

      Make sure you are on the latest version

    • @plasticjoe26
      @plasticjoe26 2 роки тому +1

      Figured it out... all in one pack
      1. Took off in EIS off - Wide , Landed
      2. Took off in Rocksteady - Wide , Landed
      3. Took off in Horizon Stabilization - wide , Landed
      4. Took off in EIS off - Wide , landed
      and ever since it's recorded Gyro Data

    • @tuandungtruong4116
      @tuandungtruong4116 2 роки тому +1

      @@plasticjoe26 thank you bro

  • @harrybananas8004
    @harrybananas8004 2 роки тому

    I followed everything that you said and i am still not getting it to work.. still no gyro data, I have installed 1.2 of Gyroflow and updated the drone via dji assistant and still no luck.. anything I may be missing?

    • @MANOLET
      @MANOLET 2 роки тому

      Same here. Followed the steps but no gyro data still

    • @harrybananas8004
      @harrybananas8004 2 роки тому

      @@MANOLET update through the phone and it gets fixed not the computer with assistant

  • @MadRC
    @MadRC 2 роки тому

    Stop, stop-it now. Step away from the upload button and go play COD or something. Your a machine.