This is the way! I’ve watched about a dozen videos, some twice. I watched yours once but it didn’t show up in my history. I couldn’t find it again. All I could find in my search was either cutting the top apart or welding corners together or overlapping the corners. Anyway, I started taking things apart. Once I got things apart, the only thing that made since was riveting the two cabinets together. I ended up moving the drawer slides so the 1/2 width, shallow drawers are side by side and the 1/2 width, deep drawers are side by side. New sub here. Thank you for the video.
I think this is my favorite of these mods. The side locker is a nice addition, but my FAVORITE touch is the lock replacement 👍👍👍 I don't even have this cart, nor do I intend to get one. I just enjoy these videos. I saw one of these where the guy who did it put all of the same sized drawers together and I sort of thought you might do that.....
PSA: You can buy an extra two locking swivel caster from HF that are the ones you find from the cart originally. Call up their parts department and just ask for the swivel casters that come in the box originally and they can send em to you.
I'm here to tell you that your 4 caster mod may work in a small shop or service bay, but I had a box given to me here at work. It had 4 casters. My work area is the size of 2 football fields, on weekends I may be on the other end of the building, which by the way is 60 acres. The first time you push a 4 caster box full of tools 1000' you'll quickly learn that they suck!
Can the top section be removed but leave the flat piece on the top I'd the cart instead of taking it off with the hinged lid? I'm not going to double stack the cart so I want to leave a surface on your top (and not have to mess with reinstalling the drawer glides).
Would it work to have all the narrow width drawers by each other (so everything matches and looks more like “factory”)? Just mount the center rail at the bottom right below the other, but would that still work when it comes to making everything lock? Also, in order to make the bottom section lock, you just cut off the 10mm difference off the top locking slides?
Whatd you end up doing? I'm at this point myself I'd hate to have to drill out the rivets on the sliders but other than sending them in at a angle I'm not sure
@@hunterfultz7960 Got a small set of stainless screws and bolts and bolted them together that way. No way to get the rivet gun i had in there to place.
Is there any reason why you can't substitute properly sized firring strips for the magnetic bars at the bottom base? Oh, and thanks for this video, I'm short, too, and I definitely want the finished project to be the same height as the original cart.
A few dollars???? Try $200. These carts are less than $200 a piece. The full bank cart is retailing at $600. Not to mention the full bank cart is too high to use as a work table unless your 6'5" and up. I'm definitely doing this.
@@RoughRaiders13 those full banks are always on sale for $499.99. They are on sale for that price more than they aren't on sale. They also have several additional features that this custom built one does not have. I'm not saying anything against you. You do you bro, but it's just a lot of extra nonsense for no reason. You did a good job though 👍
@@victorhoyt4352you def don’t see those full bank service carts on sale for that sale (17% off) that often and if it is it’s 10-15%. Not sure what these “several additional features” are beside the fact that it’s too tall to use as a flat top unless you tower over everyone. For the price of the one 34” full bank service cart @$600 I have 2 carts stacked with a side cabinet putting me at 50” with 16 drawers…but keep telling yourself it’s nonsense and for no reason👍🏼
@@RoughRaiders13 You're thinking of the 4-drawer tech cart. The 5-drawer tool carts that he used are $280, sometimes $250 on sale, so you're spending a ton of time and maybe saving $100, and still have less overall usable storage space.
I wold like the tutorial without the foul mouth much better. I would use something as a spacer other than magnet strips. You will magnetize the box and your tools.
I think I speak for everyone who doesn’t normally have to ask for help getting to the top shelf, can we stop making work surfaces at comfortable height for the fucking elves in Santa’s workshop? I’m getting really tired of having to tweak my back just to get my fingertips down to the working surface height of every out of the box workbench.
Best double stack video I've seen and I think I've watched them all.
I appreciate it
This is the way!
I’ve watched about a dozen videos, some twice. I watched yours once but it didn’t show up in my history. I couldn’t find it again. All I could find in my search was either cutting the top apart or welding corners together or overlapping the corners. Anyway, I started taking things apart. Once I got things apart, the only thing that made since was riveting the two cabinets together.
I ended up moving the drawer slides so the 1/2 width, shallow drawers are side by side and the 1/2 width, deep drawers are side by side.
New sub here.
Thank you for the video.
I think this is my favorite of these mods. The side locker is a nice addition, but my FAVORITE touch is the lock replacement 👍👍👍
I don't even have this cart, nor do I intend to get one. I just enjoy these videos.
I saw one of these where the guy who did it put all of the same sized drawers together and I sort of thought you might do that.....
dude... this is so good. Great personality you should really film more stuff
agreed!
I’ve been waiting to do this with my 5 drawer since you dropped this video. I just finished doing the double stack and it only took me 8 hours!
Killed it. Good video man.
Outstanding job!
Use a couple of magnetic bars to keep the side locked closed
If I am buying two carts, I’m using them both side by side, or attaching them side by side, for full use of everything available.
PSA: You can buy an extra two locking swivel caster from HF that are the ones you find from the cart originally. Call up their parts department and just ask for the swivel casters that come in the box originally and they can send em to you.
Looks factory! Awesome job
Do you have to buy 2 harbor freight 5 drawer carts to do this mod, or can you buy the parts separately?
I'm here to tell you that your 4 caster mod may work in a small shop or service bay, but I had a box given to me here at work. It had 4 casters. My work area is the size of 2 football fields, on weekends I may be on the other end of the building, which by the way is 60 acres. The first time you push a 4 caster box full of tools 1000' you'll quickly learn that they suck!
Can the top section be removed but leave the flat piece on the top I'd the cart instead of taking it off with the hinged lid? I'm not going to double stack the cart so I want to leave a surface on your top (and not have to mess with reinstalling the drawer glides).
Maybe you should’ve been an engineer 😮. Awesome video 🤙🏽🤙🏽💯
Would it work to have all the narrow width drawers by each other (so everything matches and looks more like “factory”)? Just mount the center rail at the bottom right below the other, but would that still work when it comes to making everything lock?
Also, in order to make the bottom section lock, you just cut off the 10mm difference off the top locking slides?
My favorite part is you built this cool ass cart in your kitchen.
Nah I just cook in my garage.
@@damienlinh lol
The first couple of steps must have been tough.
I am in the process of doing this myself. When it comes to riveting them together did you have a gap on the sides where they meet
How did you manage to rivet the top left side under the smallest drawer rails?
Whatd you end up doing? I'm at this point myself I'd hate to have to drill out the rivets on the sliders but other than sending them in at a angle I'm not sure
@@hunterfultz7960 Got a small set of stainless screws and bolts and bolted them together that way. No way to get the rivet gun i had in there to place.
Is there any reason why you can't substitute properly sized firring strips for the magnetic bars at the bottom base? Oh, and thanks for this video, I'm short, too, and I definitely want the finished project to be the same height as the original cart.
I don't see any reason why that wouldn't work as well
Great job!
Did you check to see that the keys for your two tool carts were actually different?
I know the keys for husky cabinets are universal
You’re amazing!!!!!!!!
This is great, dude!
Did you consider using one of those magnetic strips to hold the side cabinet closed while unlocked?
@@2dawgsmiked684 I hadn't considered that, it's a good idea
Did you bolt the bottom cart to the base at all or are they just resting on the magnets ?
No bolts, just resting on the magnets.
Whats the part number on those grommets
Does anyone know if you could do this with the older cart and the new carts that they have right now?
10/10
For just a few dollars more, you can just get the full bank car, and save yourself a lot of hassel. The grommet idea is genius though!!
A few dollars???? Try $200. These carts are less than $200 a piece. The full bank cart is retailing at $600. Not to mention the full bank cart is too high to use as a work table unless your 6'5" and up. I'm definitely doing this.
@@RoughRaiders13 those full banks are always on sale for $499.99. They are on sale for that price more than they aren't on sale. They also have several additional features that this custom built one does not have. I'm not saying anything against you. You do you bro, but it's just a lot of extra nonsense for no reason. You did a good job though 👍
and all the drawers are tall af!! some guys like having 3 inches of wasted space though@@RoughRaiders13
@@victorhoyt4352you def don’t see those full bank service carts on sale for that sale (17% off) that often and if it is it’s 10-15%. Not sure what these “several additional features” are beside the fact that it’s too tall to use as a flat top unless you tower over everyone. For the price of the one 34” full bank service cart @$600 I have 2 carts stacked with a side cabinet putting me at 50” with 16 drawers…but keep telling yourself it’s nonsense and for no reason👍🏼
@@RoughRaiders13 You're thinking of the 4-drawer tech cart. The 5-drawer tool carts that he used are $280, sometimes $250 on sale, so you're spending a ton of time and maybe saving $100, and still have less overall usable storage space.
I cut it 3 times and it was still too short
Doesn't harbor freight make one that's almost like this?
This is cool and i watched the whole thing but thats to much work for me
Fair enough
I wold like the tutorial without the foul mouth much better.
I would use something as a spacer other than magnet strips. You will magnetize the box and your tools.
Dude more in depth
Just buy a bigger box dude
I think I speak for everyone who doesn’t normally have to ask for help getting to the top shelf, can we stop making work surfaces at comfortable height for the fucking elves in Santa’s workshop? I’m getting really tired of having to tweak my back just to get my fingertips down to the working surface height of every out of the box workbench.
@DamienLinh
The best 2 stacked I saw 👀
#SideLocker
U got new SubScriber dude!!!