does the HDMI and SDI show clean video transmission in your experience. I work in broadcasting and I'm wondering if this would be a good option for some live Drone shots. Thanks
@@MadRC Thanks for the reply. Sorry, I didn't mean clean as in no overlays. I meant clean as in the live feed doesn't glitch, drop out, lose frames, ect.
Great video as usual! At 2:00 minutes in you mentioned a 3D printed mount you made to use it with the original i2 remote tablet holder. Do you have a link for this please as I can’t find it in the description. Thanks!
Very good videos thank you does the app crash on crystal sky? When using as dual operators it seems slower and crashes the camera operator! And what range does multi link give you?
What about usingthe REMOTE FOCUS with the Cendence. You have to remove the Patch Pad Antenna because it uses the CANN port like the remote Focus. Anyway around that?
I want to buy an Inspire 2 so bad, but I want better transmission like Occusync 2.0 or 3.0 so will wait to pull the trigger when Inspire 3 eventually drops.
Thanks for the detailed descriptions, they are very useful. I’ve only used mine a couple of times and would have loved the ability to set one of the sliders or wheels to control a zoom function. The only way I can find is to use a swipe action of the monitor which is far from precise and not that smooth....can’t believe DJI didn’t think anyone would have a zoom lens and appreciate that feature! I’ve saved the video and will, no doubt, refer to it over the coming months. Take care and catch you later. Peter
Just to clarify the Cendence in this review will not work with the new M200 V2 series, and the other way around. the Cendence delivered with the M200 serie V2 will not work with I2 ore old M200 series. The new one use occusynce 2.0
A bit late but the standard controller can't recenter the camera via a programmable button, I have the standard with CS. All I can get is "forward and down" but I see the Cendence has that centre camera feature. also the range? with the Patch, is it really any good as I have the fpvlr boosters and antennas on the standard controller to get out there. I'm worried that this wouldn't do the same. Not sure what to do, here in Australia it's $1700 au and the new Inspire is coming with Ocusync 2.0. I know the transmision module is update-able on the Cendence so it's possible this would flow through to the new Inspire. I'm very confused, should I wait or go for it?
So only inspire 2 or m 200 no other ? What a shame! And does crystalsky crash my camera guy is complaining about the app crashing and I noticed a iPad seems to have better definition? What is it rated at ? Crystalsky is not 4K what is it and what is a iPad?
Hi Everyone DJI is running an EU summer discount campaign on the Mavic 2 Zoom with and without the Smart Controller, the DJI Goggles Racing Edition as well as the Ronin S click.dji.com/ACn75QE1zkDxN-vNAR7FTg?pm=link&as=0001 Further to this for the first 5 orders I can offer an additional 5% discount off these sales prices making it even more inviting. This is a fantastic deal and to get this special additional discount email mad_rc@icloud.com and I will send you the link and code. This is only open to the first 5 people who apply. This promotion ends on the 29th May for EU excluding UK Users so get in quick. More Info on click.dji.com/ACn75QE1zkDxN-vNAR7FTg?pm=link&as=0001
good morning consult both controls are cendence GL900A ?? I have a cendence GL900A for the matrix 210 V2.0 and I want to leave as a slave a cendence GL800A, do you know if they are compatible? thanks for your reply
It’s very much in specific conditions it helps. For instance in 1080P live feed mode it does however in 720P it’s limited. It’s also highly directive in its behaviour. I did a separate video on it actually and it’s interesting overall. Some of them were out and out faulty as well though. The RC should beep when you plug it in.
@@MadRC so should you power up the radio and then attach you say? From my building days I was always told never power up a device until the antanna is attached! I must try it now tho?!!
Not normally but to test the patch is working when on I plug the can cable and plug it back in. You should get a beep. If you don’t it’s likely faulty.
does the HDMI and SDI show clean video transmission in your experience. I work in broadcasting and I'm wondering if this would be a good option for some live Drone shots. Thanks
Yes you can set it to clean output in the setting. No osd overlay.
@@MadRC Thanks for the reply. Sorry, I didn't mean clean as in no overlays. I meant clean as in the live feed doesn't glitch, drop out, lose frames, ect.
I could be wrong but you said you couldn't save on the CS. I think to do that you need an SD card in the slot.
Great video! Can you hot-swap the battery while the aircraft is in flight?
No it will trigger RTL.
Can you do a video on multilink and getting the best reception? Thanks
Great video as usual! At 2:00 minutes in you mentioned a 3D printed mount you made to use it with the original i2 remote tablet holder. Do you have a link for this please as I can’t find it in the description. Thanks!
Phantom 4 pro or DJI Caendence? How goos is the Cendence camera qaultiy compared to Phantom 4 Pro 60fps 4K
@Mad's Tech
can i use the cendence as MASTER and the standard remote as slave for the gimbal?
Yes absolutely
Very good videos thank you does the app crash on crystal sky? When using as dual operators it seems slower and crashes the camera operator! And what range does multi link give you?
What about usingthe REMOTE FOCUS with the Cendence. You have to remove the Patch Pad Antenna because it uses the CANN port like the remote Focus. Anyway around that?
Very useful tutorial. I went looking for your 3D print file (Crystal sky mount and antenna quick release) in the description but I don't see the link?
Hi there - I can’t seem to map ‘Spotlight’ to C2. It’s not available as an option under ‘gimbal’.
I want to buy an Inspire 2 so bad, but I want better transmission like Occusync 2.0 or 3.0 so will wait to pull the trigger when Inspire 3 eventually drops.
Thanks for the detailed descriptions, they are very useful. I’ve only used mine a couple of times and would have loved the ability to set one of the sliders or wheels to control a zoom function.
The only way I can find is to use a swipe action of the monitor which is far from precise and not that smooth....can’t believe DJI didn’t think anyone would have a zoom lens and appreciate that feature!
I’ve saved the video and will, no doubt, refer to it over the coming months. Take care and catch you later. Peter
Mr. Mad RC, would you mind sharing your custom button settings on the cendence?
I just purchased a cendence for my Inspire 2 and am having no luck connecting... It's linked but it will not connect... Any advice?
Hmm that’s odd. I would make sure you have the firmware updated then check your device connection. Is the remote controlling the gimbal at all
Just to clarify the Cendence in this review will not work with the new M200 V2 series, and the other way around. the Cendence delivered with the M200 serie V2 will not work with I2 ore old M200 series. The new one use occusynce 2.0
That is correct.
Wow and the new one does not work Mavic 2?
Is this controller still worth it?
Why am I seeing a cendence 2 is thier a updated model?
Camrise is listing 2 models very clearly one is 1499usd and the other 1399 usd
It’s not listed on official web
This controller was ment to use track tenna which is not appearing to be produced
A bit late but the standard controller can't recenter the camera via a programmable button, I have the standard with CS. All I can get is "forward and down" but I see the Cendence has that centre camera feature. also the range? with the Patch, is it really any good as I have the fpvlr boosters and antennas on the standard controller to get out there. I'm worried that this wouldn't do the same. Not sure what to do, here in Australia it's $1700 au and the new Inspire is coming with Ocusync 2.0. I know the transmision module is update-able on the Cendence so it's possible this would flow through to the new Inspire. I'm very confused, should I wait or go for it?
Its unlikely the next Inspire will use Lightbridge. All of DJI craft have moved to Ocusync
Very good descriptions Thanks Tonis
Hey can you use the Cendence remote with the DJI mavic pro 2
Sorry no it’s Lightbrige 2 compared to the M2 being Ocusync 2. They are different radio systems.
So only inspire 2 or m 200 no other ? What a shame! And does crystalsky crash my camera guy is complaining about the app crashing and I noticed a iPad seems to have better definition? What is it rated at ? Crystalsky is not 4K what is it and what is a iPad?
Hi Everyone DJI is running an EU summer discount campaign on the Mavic 2 Zoom with and without the Smart Controller, the DJI Goggles Racing Edition as well as the Ronin S click.dji.com/ACn75QE1zkDxN-vNAR7FTg?pm=link&as=0001
Further to this for the first 5 orders I can offer an additional 5% discount off these sales prices making it even more inviting. This is a fantastic deal and to get this special additional discount email mad_rc@icloud.com and I will send you the link and code. This is only open to the first 5 people who apply. This promotion ends on the 29th May for EU excluding UK Users so get in quick.
More Info on click.dji.com/ACn75QE1zkDxN-vNAR7FTg?pm=link&as=0001
good morning
consult both controls are cendence GL900A ?? I have a cendence GL900A for the matrix 210 V2.0 and I want to leave as a slave a cendence GL800A, do you know if they are compatible?
thanks for your reply
No they are not sorry. The V2 is Ocusync not Lightbridge.
No one is talking about the price jump, when it came out cost $999 now cost $1399
Sadly thats US Tariffs.
Mad RC the price jump was a while ago right? And the tariffs I don’t think was a 40’percent rate ?
And if your live broadcasting can you record and not lessen video quality I notice most drones loose video quality if recording and broadcasting
Can we use xt2 thermol side in day time.
thanks it was very clear. I love my own set.
Great video, thank you
Liked and subscribed. That was a proper review! Thanks! :-)
Does anyone know how to spin the gimbal 360 degrees?
Good info thanks
Very nice. Thank you.
Well open and thank you.
C...can you exclaim "Inconceivable!" just once?
Please can you explain
Wow
Anyone know if possible to set a dedicated zoom control on the Cendance for the M200 with Z30 camera?
No as I understand it. You can map a zoom in and zoom out button but no knob or slider.
Great video. The patch antanna is a waste of time tho. I have mine 18 months and can only say the signal from the patch is rubbish
It’s very much in specific conditions it helps. For instance in 1080P live feed mode it does however in 720P it’s limited. It’s also highly directive in its behaviour. I did a separate video on it actually and it’s interesting overall. Some of them were out and out faulty as well though. The RC should beep when you plug it in.
@@MadRC so should you power up the radio and then attach you say? From my building days I was always told never power up a device until the antanna is attached! I must try it now tho?!!
Not normally but to test the patch is working when on I plug the can cable and plug it back in. You should get a beep. If you don’t it’s likely faulty.
@@MadRC ya I'm not getting a beep or message on the radio saying connected
It’s 1399 usd
đắt vãi dí
Dji is like Apple but for drones
Over priced
Crap support
Only works with their products
And discontinues parts right after they have been released