Finally a review where the presenter is not trying to make a show about himself being cool, but rather he is talking about the reason why we are here. Professional job!
A little piece of information for everyone. You should hold the Inspire 2 by one of the center arms while going from Travel mode to Flight mode. When you leave it on the table or say the ground it pulls the landing gear and eventually causes failures to the motor mount assembly connecting to the side rods. There have been failures of motor assemblies disconnecting from the side rod (connecting the two motors on each side) and the bird crashing to the ground. There is enough clearance to actually hold the drone while going from Travel mode to Flight mode.
since 1000000000000 of electrons are getting already powered for the motors when its on. when the camera is attached when the drone is on it adds more electrons making the motors confused which make a few electrons from the motors damaged because of how much electrons are getting added
It's because the gimbal starts calibrating right when it's given power and if you have it on then turn it on it will calibrate but if you are putting it on while it calibrates it damages the motors
Superb review ! I have tons of hours under my belt with MA, MP and P4P. Looking to buy the I2 at some point so thanks for the review. Please feel free to check out some of my work.
Wow after twelve months this seems so yesterday, so much not mentioned but great vid for the time. I just happened across it, had a giggle but besides that well done regards Tony
Thanks. Yes of course there is much more that could be explained. I had planned to put out more video content on the Inspire 2 but just have not had the time.
Nice man thanks very helpful ... Previous comment some people are just boring and full of hate ... time he spent to analyse and criticize blablabla ... could have just watched other channels ... Anyway thanks man very interesting ...
The screen on my cell keeps showing No SD card thought one is inserted in the side of the drone. Plus video will not record when I press record button as drone is parked.
I bought a inspire 2 with the x5s camera but it's my first drone I've ever bought and I'm only 15 and don't even know how to use it lol so I've been looking at these vids
How the heck were you able to start the Inspire 2 by pressing and holding the power button in travel mode? I could not do it. If you have the gimbal attached will the I2 go into travel mode or is it protected?
I find it incomprehensible that someone can spend so much time on a video and not focus on the subjects of the discussion: the drone and its parts, and the RC + Android. The RC + Android were at the very base of the screen and from 08:30 and one could not see the detail. At 13:30 the device is almost off shot to the right. You talk about the FPV camera but don't show it. FFS. this whole presentation ought to be redone. To have to stare at this dude's face when the items he is talking about should be the main focus of the frame is about as unprofessional as it gets... Very much a thumbs down.
Understandable. The app received a few updates over the month after publishing this video that fixed all of the issues I was having regardless of the connected device.
The updates are nothing. All they do is it slows down your device. My drone got updated and the "gimbal"( DJI said that was the problem) broke. I sent it to them and they made me pay for replacement parts. The drone is worth double now. I got it back a month later and it was a brand new one without stickers(model number, serial number, or my signature I put in it*for tracking my drone). DJI is a joke. Also, it is a phantom. Worst customer service ever, I argued with them for three weeks and my drone was lost during shipping, but they found it in their shipping department.
throws in a cable to the remote... does not say to which socket out of 4 on the remote... if the cable comes with the drone..... why do geeks skip whats important assuming things are obvious.... if they were we wouldnt be here would we... obviously
Maybe if you don't know what a USB port is and the symbol for it, maybe get some help from someone better qualified, rather than whine about it. Be grateful for any free help, Mr Gifthorse
maybe when there are a few ports all with different functionality it is wise to explain all to new users who need to know all the ways to connect what...with soo many tablets and phones that can and cannot successfully function with the controller it is about detail not lazy reporting..so you failed... and to see you the professional being rude to a valid moan is pretty sad... do better. and for the record `i know` what a usb is... many don`t know that hadmi links and usb links can often interchange function... or maybe you don`t know this... do better @09
absolute fail.. cant see the screen the whole time.. why are we looking at the top of the drone.. and you do not go thru the setup with remote and then linking to drone ur already setup.. why did you waste everyones time
Finally a review where the presenter is not trying to make a show about himself being cool, but rather he is talking about the reason why we are here. Professional job!
A little piece of information for everyone. You should hold the Inspire 2 by one of the center arms while going from Travel mode to Flight mode. When you leave it on the table or say the ground it pulls the landing gear and eventually causes failures to the motor mount assembly connecting to the side rods. There have been failures of motor assemblies disconnecting from the side rod (connecting the two motors on each side) and the bird crashing to the ground. There is enough clearance to actually hold the drone while going from Travel mode to Flight mode.
Very informative video. I just picked up my Inspire 2 / X5S gimbal today and this was very helpful for initial setup. Great work!
Don't mount the camera while drone is on, it's bad for the motors.
Dawson Boyle please explain why
since 1000000000000 of electrons are getting already powered for the motors when its on. when the camera is attached when the drone is on it adds more electrons making the motors confused which make a few electrons from the motors damaged because of how much electrons are getting added
FrayZ - I can't tell if you're trolling or just aren't a native English speaker
It's because the gimbal starts calibrating right when it's given power and if you have it on then turn it on it will calibrate but if you are putting it on while it calibrates it damages the motors
Awesome video.
Superb review ! I have tons of hours under my belt with MA, MP and P4P. Looking to buy the I2 at some point so thanks for the review. Please feel free to check out some of my work.
Lovely video! Keep up the good work.
Wow after twelve months this seems so yesterday, so much not mentioned but great vid for the time. I just happened across it, had a giggle but besides that well done regards Tony
Thanks. Yes of course there is much more that could be explained. I had planned to put out more video content on the Inspire 2 but just have not had the time.
Hi. Is it possible to attach a camera when the Inspire 2 is turned on?
Nice man thanks very helpful ... Previous comment some people are just boring and full of hate ... time he spent to analyse and criticize blablabla ... could have just watched other channels ... Anyway thanks man very interesting ...
Doing a review without flying it? Common man
The screen on my cell keeps showing No SD card thought one is inserted in the side of the drone. Plus video will not record when I press record button as drone is parked.
Nice instructional
AMEN .. WELL DONE !
greetings from bodrum turkey
Still thinking about selling the 4 pro?
I bought a inspire 2 with the x5s camera but it's my first drone I've ever bought and I'm only 15 and don't even know how to use it lol so I've been looking at these vids
snake jump get a sparc
TYTFan Sig yah I asked my mom she said she will buy me one to Learn on or a phantom 4 pro I think imma get the phantom pro tho idk what do you think?
Joelle M no my inspire came to 12,300 bc I'm in Canada and the p4 pro was only 2,000
Get a mavic or phantom 4 pro
snake jump does your inspire 2 stil live
I will also buy one i am 15 too ,sry for my bad english
Greetings from Luxemburg:)
How do I adjust the flexing of the arms so I can make it flat so I fit it in the carry case?
Press the power button 5 times
How the heck were you able to start the Inspire 2 by pressing and holding the power button in travel mode? I could not do it.
If you have the gimbal attached will the I2 go into travel mode or is it protected?
So ,what is the need and use of cinessd .and why inspire 2 and x5s needs sd card
Hi what watch are you wearing?
I need one of these in my life.
It's pretty fantastic but to be honest I fly my Phantom 4 Pro 20x more often.
I have a mavic Pro and I love it. I want to take it up a notch but for this price I can wait
@@jeradtech can I ask why you fly the phantom 4 more often?
Price kiya hai
When I view the camera via my cell phone the pictures very low quality.
next on my list
The position of the RC antennas is incorrect. To use with 2.4 mhz use 60-degree angle, with 5.8 mhz use 90 degrees. (per DJI)
Hello sir
I find it incomprehensible that someone can spend so much time on a video and not focus on the subjects of the discussion: the drone and its parts, and the RC + Android. The RC + Android were at the very base of the screen and from 08:30 and one could not see the detail. At 13:30 the device is almost off shot to the right. You talk about the FPV camera but don't show it. FFS. this whole presentation ought to be redone. To have to stare at this dude's face when the items he is talking about should be the main focus of the frame is about as unprofessional as it gets... Very much a thumbs down.
The fact that you can't even get the App to work kinda ruins this video.
Understandable. The app received a few updates over the month after publishing this video that fixed all of the issues I was having regardless of the connected device.
They want this much for this drone and only one set of props.
Fly time
the terms are .. YAW.. THROTTLE .. PITCH .. ROLL :)
Hii
Why are you constantly checking your watch? Very distracting.
The updates are nothing. All they do is it slows down your device. My drone got updated and the "gimbal"( DJI said that was the problem) broke. I sent it to them and they made me pay for replacement parts. The drone is worth double now. I got it back a month later and it was a brand new one without stickers(model number, serial number, or my signature I put in it*for tracking my drone). DJI is a joke. Also, it is a phantom. Worst customer service ever, I argued with them for three weeks and my drone was lost during shipping, but they found it in their shipping department.
you missed where the SD card goes
And several other basic things...
hi
Hello
drone
Like that you are an Android user. Get video ...
Just get an iPhone lol
please just say RADIO .. instead of "RC" .. RC means radio control.. not "radio controller" :)
If you don't know 80% of this stuff already, you should not own a $5,000 drone. Just sayin'
Houston Brown why not?
throws in a cable to the remote... does not say to which socket out of 4 on the remote... if the cable comes with the drone..... why do geeks skip whats important assuming things are obvious.... if they were we wouldnt be here would we... obviously
Maybe if you don't know what a USB port is and the symbol for it, maybe get some help from someone better qualified, rather than whine about it. Be grateful for any free help, Mr Gifthorse
maybe when there are a few ports all with different functionality it is wise to explain all to new users who need to know all the ways to connect what...with soo many tablets and phones that can and cannot successfully function with the controller it is about detail not lazy reporting..so you failed... and to see you the professional being rude to a valid moan is pretty sad... do better. and for the record `i know` what a usb is... many don`t know that hadmi links and usb links can often interchange function... or maybe you don`t know this... do better
@09
absolute fail.. cant see the screen the whole time.. why are we looking at the top of the drone.. and you do not go thru the setup with remote and then linking to drone ur already setup.. why did you waste everyones time
hi