EU FICO FELIZ DE VER QUE TEM SERES QUE USAM SUA CABECA PRA PENSAR, E PENSANDO, TENDO IDEIAS, O SER CRESCE, O MUNDO MELHORA E TODOS GANHAM. PARABENS MAIS UMA VEZ PELAS OTIMAS IDEIAS E OS BRILHANTES PROJETOS.
Not sure if this wheel is well balanced, or anything in this project, but it works 🤷♂️ This is a very smart guy! Love this “Just do it” project! Congratulations!
I fallow lots of builders on youtube and some that already have names for them self but hardly any that make there own parts from scrap metal and design it fully from the parts they make.....this has to be a double thumbs up on my book because its related to my set tools and skills with the tools one would get by with to build anything if you put time on things and wouldn't cost as much as like other builders that buy everything and then build off of that....kinda ok that way but building it fully like this I dang love we need more people like this on here.
Very skilled craftsmanship. No huge expensive shop with expensive tools? No problem. A good craftsman with a welder and an anglegrinder can build miracles. Keep up the good work.
Why are such talented people in UA-cam keen on showcasing only their creations and are very particular in not revealing their face/Identity? Please let the world know who you're and let them celebrate you. Congratulations 👏
This guy is super clever. I'm watching and saying how's going to use that with a confused look on my face then laughing 😅 because of the cleverness of it all.
hi Mr. Albert you had done nice job. when you steer to extreme left or right the rear tyre loose grip on floor. When you use 2 motor control they are not vectorly sync. They both produce same power. so while cornering on road you main loose control of vehicle even as the speed increase above 80 km/h. Your desgin need refinement as you bypass differencial for rear wheels. NICE WORK KEEP IT UP
Just a quick tip: a better option bfor a seat would be either a tractor seat or a drift trike bucket seat. It can be bolted, and it holds you in better. Plus it's cheap, and not cutting is required, maybe a bit of drilling.
Awesome build but you should have been able to fix the hoverboard by pressing and holding the button from the off position for about ten seconds then shut it off and turn back on and that basically resets the gyro
EU FICO FELIZ DE VER QUE TEM SERES QUE USAM SUA CABECA PRA PENSAR, E PENSANDO, TENDO IDEIAS, O SER CRESCE, O MUNDO MELHORA E TODOS GANHAM. PARABENS MAIS UMA VEZ PELAS OTIMAS IDEIAS E OS BRILHANTES PROJETOS.
Not sure if this wheel is well balanced, or anything in this project, but it works 🤷♂️
This is a very smart guy! Love this “Just do it” project! Congratulations!
I made gokart project like this except I did not make new tires and I have a regular handbrake. This looks really neat!
Wow. it was very good. when I saw you driving, I was laughing like a child. as if I had won this kart as a gift. congratulations you are a master.
thank you 😅
At first I thought omg I couldn't believe you was destroying the hover board but after you finished the job it was really cool good work.
I absolutely love how everyones a expert welder and grinder in these weird videos lol
jason griffin right! My dumbass at the crib thinking this some DIY 😂😂
@@jaymack8568 - if some random joe in a 3rd world country can do this.... what is the excuse for someone in a 1st world country?
Chris id say he’s a bit more than the average joe.......maybe that’s just me 🤷🏾♂️
Haters will be haters i guess. 😂
Its 120 dollars total to get a cheap aluminum welder and an angle grinder. Just throw away the directions and wing it
I like the home made stearing that was a masterpiece.
Yes
I love that you make this with stuff most of your UA-cam viewers would just throw out.
I fallow lots of builders on youtube and some that already have names for them self but hardly any that make there own parts from scrap metal and design it fully from the parts they make.....this has to be a double thumbs up on my book because its related to my set tools and skills with the tools one would get by with to build anything if you put time on things and wouldn't cost as much as like other builders that buy everything and then build off of that....kinda ok that way but building it fully like this I dang love we need more people like this on here.
Very skilled craftsmanship. No huge expensive shop with expensive tools? No problem. A good craftsman with a welder and an anglegrinder can build miracles. Keep up the good work.
thank you for support bro..
@@albertnario4877 you are welcome
Excelente! Buen invento para los moteles tener un “kart” de escape por si la cosa se pone difícil🤣
Why are such talented people in UA-cam keen on showcasing only their creations and are very particular in not revealing their face/Identity? Please let the world know who you're and let them celebrate you. Congratulations 👏
This guy is super clever. I'm watching and saying how's going to use that with a confused look on my face then laughing 😅 because of the cleverness of it all.
Plppp 😂
Loved his skillful commitment
Your creation amazes me. Congratulations on growing even more if you really did this.
I always love your project, Albert
thanks bro. 😁
I love how he uses gloves but has no shows or socks xDD
Shoes
I think coz in welding he is more particular on the grip or what he's holding? Just a guess though 😉
hi Mr. Albert you had done nice job. when you steer to extreme left or right the rear tyre loose grip on floor. When you use 2 motor control they are not vectorly sync. They both produce same power. so while cornering on road you main loose control of vehicle even as the speed increase above 80 km/h. Your desgin need refinement as you bypass differencial for rear wheels. NICE WORK KEEP IT UP
yes they produce same power but, it can give same torque at different speed.. because it's electric motor.. have a nice day. 😁👍
Поставьте лайк чтобы американцы подумали что я написал что-то важное
Я тоже добавлю)))))
@@АлексейБелов-и4ц 😃👍
🤣🤣🤣😂😂😂👍👍👍
😂😂😂👍
😀😀😀 С чего ты взял что они американцы? Классно сказал
Nice one bro.
Ayos din yung holder ng battery mo bro.👍👍
haha bigay sakin sama ko dw sa video.
Молодец, фантазия работает, но вот рулевое управление не надёжно, но и без амортизаторы жестковато ездить а в целом красавчик.
Он ещё и намертво тяги приварил, сход развал не сделать
Пружынки заварил под сидением
Лучше объясните по какому принципу он отцентровал мотор в обод?
Well I like the concept, but I never knew that you dont have to prep the metal weld with electrodes, plus those welds holding you, nice
Тоже ищешь русский комментарий? Ставь лайк👍
Тока сатанинское какое-то колесо получилось по ощущениям и визуально:))
You should try to put a rear bike axel with free wheel than you whould be the best conversion video ever
the steering geometry could use some improvements look how the pros do it... (point the steering axis just in front of the center of the contact spot)
Wes orapopo ga like!padahal vidio ini bermanfaat bagi kita dan bisa memperluas imajinasi kita
Excelente trabalho , parabéns !
Just a quick tip: a better option bfor a seat would be either a tractor seat or a drift trike bucket seat. It can be bolted, and it holds you in better. Plus it's cheap, and not cutting is required, maybe a bit of drilling.
Si lo haces de Aluminio tendrá mas rendimiento, actualización a 2.0 muy bien el Go Kart
Explica
you have mad skills, Should have turned it into a four-wheel powered and added a solar panel
Um verdadeiro inventor! 🤣🙏🏻🙌🏻 muito bom
Congratulations great work in that project. Greetings from Mexico 🇲🇽.
Nice flip flops for welding :)
They are comfortable not just for welding, also for concrete work, carpentry, auto mechanics.. everything
Where is this kid from. Just amazing. We need to get him a job somewhere.
Great work. I have always wanted to make one for my children. Do you have the dimensions for metal parts?
I just measured them base on my legs length.
You can use hub moters dedicated to this purpose
@@GoodBoy-cy9tj láááqqqfďfdfqfq
Awesome job! Just need an old hoverboard to add more power to the front wheels
Very good ok
Ganda sir!sana e makagawa rin kahit scooter lang magamit pagpasok.
meron ng ginawa dati sa unang video nya hanapin mo maganda rin yung pag ka gawa sa mountain bike
Parabéns muito bem bolado👍
I like how u fixed the hoverboard wheel in a big tire thts some good creativity
Молодец! Супер! Классный байк!
Говно какое-то
I congratulate you, my friend, for this beautiful and wonderful idea. Greetings ..👍👍👍👍👍👍👍🌹🌹🌹🌹🌹🇾🇪🇾🇪🇾🇪🇾🇪🇾🇪🇾🇪🇾🇪🇾🇪
All your parts are made of steel...this thing must weight half a tonn...
SV4RIN but it’s very tough I think
Awesome build but you should have been able to fix the hoverboard by pressing and holding the button from the off position for about ten seconds then shut it off and turn back on and that basically resets the gyro
I swear all Indians have the same sandals.
and weld while wearing them.
Looks great. Would benefit from. Some castor angle and Ackerman
Прикольно, новатор!
Esse cara tem que ser estudado pela NASA 😳😳😳....From Brazil
Carrinho de rolimã de rico kkkkk
Bem da hora kkkkkkkk
This is good but when i think very deep i feel like it will take forever,but it always seems impossible until it's done.
14:23 parece una bomba 💣 😬
I love this Eco friendly and clean
No noise or pollution good job
beutiful I want mee too I have hoverboard
It would be much easier to read if you put dots
At first, I thought you didn't do anything cool, but watching the whole video, you're really good
2:49 🔆🔅🎆
¡ Hay mis pupilas ! 💥👀💫
Back to my childhood :) Have nice rides, man!
Креативно канеш. Но топорно пздц😁
galing mo bro! nainspire ako.
1:15 ....y....+
Por favor ponle filtró a tus soldaduras 🔆🎆🔅💥👀💫
jajaj mirá si te quedas ciego
A like for your hardwork and creativity.
Так это ж наш российский автопром.
i con't believe this type of creativity.
Mejor lo compro ya hecho no tengo nada de eso para hacerlo me sale lo mismo comprarlo que comprar todas las herramientas y la patineta
Ang galing nyo po idol. Sana lumaki din channel ko kagaya ng sa inyo po. Salamat!
sipagan mo lang mag upload tataas dn yn. ✌️
Salamat po sir. Noted po ☺
Your so good at doing stuff by eye
WA bete wa mouj kardi👏👏👏
Nice job.. I would like to make something like that but I'm 6'1 300 lbs... to heavy! lol
4 motors, I have that problem too.
Only the most creative minds weld in flipflops. Ive got a pair of Crocs I wear during my projects 😎.
Don't trust anyone who wears crocs...
Your loss
Nice work once again. Can you make a video in the wiring diagram please.
Also how strong are the front wheels
wiring are depends on controller. you can see the diagram in my other video.
ua-cam.com/video/AyJ02PjVtH4/v-deo.html here's the link
@@albertnario4877 what watts do you tend to use
Nice job my grandson would love that..
It just needed to be recalibrated but good use for an old hoverboard anyway
Very interesting video, but you'd better take smoked glasses to view it
Very good, what if hover motor tire are installed as front wheels...
Beh Je peut dire que BRAVO. Bah BRAVO Alor. Magnifique
NGL - Dude has mad stick welding skill
Adorei esse sistema de caixa de direção usando cubo de bicicleta muito genial.
💐Supperb great efforts and your idea👌💐
It was so cool i watched the whole video in thumbnail 😁
I would definitely add a locking nut in the steering wheel otherwise a very nice project!
Good Work Youngster...
Do I have to wear protective glasses while watching this video when he is welding?😋
Great super duper....kina paisa LA ga....
thanks for the video, but where did you buy the holders on the 18650 ? please give a link
Link is in the description
Éste chaval es un genio...puede hacer todo lo que se proponga....👍👍
Great work 👌
കിടു ❤️
Very nice invention bro keep it up
Best part make in India..items 👍
Excellent! Very skillful build... I must say.
So fanny, it is so cools idea thanks for sharing
Ну задумка прикольная) большой балец вверх)))
...making due with materials and tools on hand. Talented dude, indeed!!
Just buy a JetKart attachment is way easier for your hoverboard.
Absolutely amazing & ingenious, but ????????? What is it that you can’t do?
Albert you are a master
I always love Albert project, look simple but very hard to build. Pls dude what's your battery voltage and your speed, thanks
48v but no speed for now. it's illegal on hiway.
Amazing work experience 👏🙌👌✨
Iba talaga, galing! 😊
mana sayo eh.. haha
QUE SUPER ESE MINI CAR AMIGO GRACIAS POR COMPARTIR..DIOS ME LO BENDIGA...
BYE
Lods next time video kung pano gumawa ng bomba
great job.very talented!!!