Thanks Mike for covering this topic. I have a Behringer X-Touch One and I love to use the fader, it's so much better than the mouse. Important tip if you have a single fader device: Check the "Select highlights track" option. This will make sure that your single fader always works on the track you want. You also want to have "Use Scrub+Bank ..." option checked for switching between tracks and busses.
Where is this option located? I'm thinking about going with a Behringer X-Touch One or the Presonus Faderport V2 (I don't have the money to buy any of the bigger machines) but have read a lot about issues with both devices not following the track selection in Cakewalk, which is still holding me back from pulling the trigger on either device. I really don't want to shell out any money only to be left with a controller that doesn't really let me control Cakewalk without any major hassles. Those boxes are meant to make things not only more hands-on but also faster, so a device that's severity limited in its abilities doesn't make any sense.
Thanks Mike. I have had my Keystation 61 for about 8 months and could not get the transport buttons to work. It was the "Disable Handshake" that got it working. Cheers mate.
Here's a nice ol' comment to help your video out because I've been searching for hours to get my controller back working after it bugged out for some reason! Top job, thanks!
I was hoping that you would go through the Cakewalk Generic Midi and ACT functions. I have an Alesis VI49 with lots of knobs, buttons, and transport controls have no idea how to synch them up. There's a surprising little amount of info out there and it seems like a waste of the new keyboard's potential
For my Novation Impulse 49, I had to activate the "HUI (Beta)" protocol in the Mackie Control - 1 dialog. All works now, transport controls and knobs and faders in DAW mode to control volume, pan, effect sends etc. 😊 Thanks for pointing me in the right direction, Sir.
Thanks Mike. Helped quickly get me sorted for my Arturia keylab 49 for the most part. Loop doesn’t seem to work, and the 9th rotary knob just seems to be there for twiddling only…. No function. This is the first MCU enabler controller and I used to using ACT and setting up my own maps. The MCU utility doesn’t midi learn new buttons so a crash course in the finer workings in cakewalk if you get around to it! Thanks again for the quick primer. Very useful.
Hey Mike, I remember I contacted you after a previous video about problems I was having hooking up my Arturia Keylab 61 to Cakewalk and you very kindly told me about the Hand Shake option, which certainly helped. However I was still not entirely happy with the way it was working, or not working, especially after trying the keyboard with Ableton as an experiment just to check that there wasn't a problem with my PC and found it all worked perfectly. I then contacted Arturia support who informed me that Bands Lab hadn't got the MCU protocol set up properly. With that I contacted Band Lab and they told me that one of there engineers would look into it. That was back in February. There have been a couple of up dates from Band Lab recently, neither of which mentioned the MCU protocol problem, so I contacted them again to be told that their engineers are still looking into it. It is a shame when in every other respect I find Cakewalk a brilliant DAW, that something like this lets them down. Hopefully they will sort it out soon. Love your video, very informative as usual.👍
Success! I set up my Zoom R8 to Cakewalk. It works fine as an audio interface but did not work as a control surface. Your tip on disabling the handshake cured the problem. Thank you.
Hey MIke, great stuff as always!! As some of the comments mentioned below, could you do one where you show how to connect external midi controller and set it in a way to make control changes in plugins? I think it would be an interesting topic to cover.. Thank you!!
Thanks ever so much Mike. This worked a treat for my Arturia 61 MKII. Needed all the steps you mentioned to make it work, including the 'disable handshake' and now all my controls work.
Thanks Mike, I'm using a Arturia Keylab Mkii and after this video this video I was finally able to get my hands on some of the control functions. However I ran into some problems. When I use the MCU mode, when I press the Save or Undo button, the mackie control WAI color strip moves to the bus strips only and I can no longer control track strips, and there is no button to let me switch the WAI strip back to track strips. And the other buttons in the second row (In Out Metro) are functionless buttons in MCU. Then when I changed the mode to HUI, I can control every track using the faders and knobs. However the master fader doesn't control the master volume in the bus strip. I've tried the solution you said in the comments and tried to Master Fader option from master to bus but it still doesn't work. Also, the write and undo button doesn't work in HUI, and the metro button somehow toggles the browser view, which is very weird. I really wish that I can make the controller control the correct things in Cakewalk. Is there any way for me to guide the buttons to executing the correct functions, and solve the aforementioned fader problems? Thanks a lot!
Thanks for that great video - helped me a lot undestanding the different ways on using a midi-controller. I have one question though - how do i map my midi-controllers physical buttons to certain VST-Effects? the keyboard itself (AKAI mini) is working flawlessly - but i dont get the knobs connected to let's say the reverb of an effect. regards
The 'Disable Handshake' tip worked for me. I've just started learning on a Donner DMK25 Pro and that fixed my issues. Thanks! You got yourself a subscribe and a like for that.
Thanks for this Mike. This was a great one. It is a pity you did not have a Korg nanoKontrol2... no automated fader movement but it does the basic job. Thanks again.
Please keep making good content like this. You are a very good teacher teaching from the basic to advanced. So so so helpful for musicians like me. I owe you.
Thanks Mike , it was very informative. Could you also make dedicated video for connecting Arturia Keylab Essential 49 mk 3 with Cakewalk because I searched and found no videos for this.
You got me working! I'm using Cakewalk with a Novation Launchkey MK3 Mini. Had midi settings right, but when I went into Utilities and checked HUI, my Mini lit up in DAW mode! Thanks, Mike!! 😊 It comes (and is made for) Ableton (Lite) but I just don't seem able to like Ableton much.
I've just had the same experience, although I can't get the stop/solo/mute button to work. I'd also like to be able to control the plugins with it. Have you had any luck with either of these issues.
Hi Mike - Thanks for some good tips from your vid - I have been trying to set up an M Audio Oxygen Pro 61 with Cakewalk. Using the Preset Editor and setting up Mackie I have some controls working but not all - I can't seem to get the Zoom button/function working from the keyboard - just wondering whether you have any experience with the Oxygen Pro (you recommend Oxygen on your Gear section) and whether there are any templates for this keyboard?
Hi Mike Just bought a Presonus io station 24c per your recommendation. The Mark Mcleod link to get the MCU drivers just seems to default to this page again. Doesn't go to the download page. Tried searching online for these MMcL Mackie Control #1 but can't find them anywhere. I do have the 24c working somewhat with just the Mackie Control selected in surface control setup marked with red btw. on the panel view It will show a block of eight channels at a time with a red color. Not sure where to go from here. Always love your videos, Thanks Will
thanks this might do the trick for my EZ Creator Fade controller ..I can see midi signals working but no faders moving nor start/-stop working..maybe disable handshake mode.
Very useful video. Here is an alternate way to access the preference configuration windows: While in the MIDI section of Cakewalk Preferences first open the Control Surfaces window and then you can select the "MIDI Devices" button to open the MIDI Devices window.
Brilliant video Mike and it seems that the McLeod Mackie updates have been integrated into Cakewalk (except for the multiple Mackie device stuff). Anyway I now have my Novation SL MkIII working in 'InControl' Mode with Cakewalk after following your demonstration. The only thing different for me was to select the protocol 'HUI (Beta)' on the 'Mackie Control - 1' pop-up instead of 'Mackie Control Universal'. Works like a bought-one :)
Hi Mike, I've been working to get a Novation LaunchKey 88 (mk3) going with Cakewalk and your video was a big help, thanks! In order to get my transport controls, faders, buttons, etc working I had to switch the Utilities/Mackie Control option for Protocol away from "Mackie Control Universal" and over to ""HUI (Beta)". While this works, it is not perfect as sometimes a fader movement (or other control) is missed requiring an additional movement to get the new value to register. I'm guessing that since it says "Beta" right in the option label, this mode isn't 100% stable yet, and may never be! Oh, well, it works well enough for my needs, and the note midi control is fine so it's a win!
Thank you for making great and high quality tutorials. You are very good at explaining! I watched this video with great interest since I have a two weeks old M-Wave SMC-PAD with buttons for play, pause, record and so, that I am still trying to configure. Cakewalk by Bandlab is not responding to anything else but the pads. Is there anyhow in Cakewalk by Bandlab that I can monitor the raw MIDI signals from any connected devices to see if anything is going into Cakewalk from the M-Wave in the first place, and/or which MIDI / CC / note, commands it sends? 🤔
Hi Mike. I bought a M-audio oxygen pro mini and I am unable to control remotely from it. As long as it works with your method I'm going to look for you anywhere from Barcelona and give you a kiss!😅
Great info Mike! I love all the new gear that's out but, I also love my rack full of great old modules. I control them with a Kurzweil controller linked to a MOTU midi express128. I just purchased the Arturia Keylab 61 Essential. Is there a way I can use the Keylab USB to control plugins and the MOTU to control my rack midi modules at the same time?
Hi Mike. Thank you for the video. I have an oxygen61 from M-AUDIO and I can't get it to work as a surface controller in Cakewalk. Can you help me with this model?
Mike, any chance of getting details of exactly how you have your Pro G2 set up, like how to check and set up the buttons, how you have your buttons assigned. You have the experience, intelligence and patience that a number of us are short of, so any help would be greatly appreciated at least, by me. Thanks. Love your vids and the abundance if knowledge you set free to us acolytes !!
another great video. unfortunatly for me, didnt work with my Alesis QX49. once i set up the output as well i cant use as piano anymore, no soud, and only 1 knob do the paning and in the oposite direction....any tip? thanks
Hi, Thanks to this video my Launkey MKIII mini works at last with most of the Cakewalk controls. My experience was slightly different, I had to set the Mackie Control to the HUI protocol wich is in beta now in Cakewalk, instead of disabling the handshake. So if the handshake didn't work look at that one! It did the miracle for me!
Hi Alfred - can you point me to information on how to get the LaunchKey MKIII set up? You mentioned HUI protocol in the Beta. How I do I get access to the beta. I would love to make this work! Thanks.
@@AharonRabinowitz Go to 8:50. When the dialog setup opens under the column F1 through F8 there's a choice box. Set that to HUI (Beta). For the rest all the info is in here in this video.
@@alfredgrupstra Thanks. But my confusion is coming before that. 1. what are you choosing for the controller/surface (since they don't list our keyboard there)? and 2. What are you choosing for Input Port/Output Port? Thanks!
Love your videos, I am a Cakewalk and Sonar Plat user. I recently purchased a Arturia KeyLab Essential 49 mk3 and love it, however, I cannot seem to get the control surfaces to work in Cakewalk or Sonar. I have followed your video here, which is helpful, but I b=need some other direction. I have attempted multiple time to create profiles using The MIDI Control Center, but to no avail. Any suggestions how to proceed?
Hi Mike, been learning from your cakewalk tutorials, thank you so much. Currently, I have an old Novation launch key 25 Mk2. I can't seem to make it work with any of the built-in VST midi's that came with Cakewalk. Tried the SI-bass, SI-strings and others. It only response to my PC keyboard. All the Midi drivers input/output are set correctly. My MIDI works fine when using Kontak player & Komplete Kontrol. Hope you can help me out.
Thanks Mike, rght now i want co use cakewalk with a wing console from behringer but, i cant to connect the second XT, besides msmcleud software its not available
Hi Mike, do you have any ideas how to manually assign MIDI knobs to certain knobs and faders in the differnet cakewalk views or even inside the stock plugins like the different SI-Instruments or the Cakewalk TTS-1? I remember that it was very easy to get this done in Ableton a vew years ago, when I had a look at a demo version of it. I've got an Akai MPK mini MKii and a Nektar Impact LX88+ Thank you for the very helpful videos about cakewalk and all the possibilities it comes with!
Mike, Thank you for what you do! Can you PLEASE HELP? Iam trying to use an Akai Professional MiDiMiX Midi Controller and I can not for the life of me figure this out. I've never had trouble like this with anything. Thanks to your video here, a couple random buttons light up and do random things, but only a couple and they do not line up or make sense. Most still do nothing. I can't find anything else online about it. You are my only hope!
Hi Mike, I've been looking forward to this video and you didn't disappoint! Thanks again for a clear, well-paced explanation. I've been holding off buying the Presonus IoStation 24C because of Cakewalk compatibility concerns. This video has reassured me and I've gone ahead and ordered it! I will let you know how I get on with controlling Cakewalk with the Presonus, and I'm also looking forward to trying Studio One bundled with it. Again, many thanks, much appreciated!
So did you get the IoStation to work with Cakewalk? What about following track selection? Does the device focus on the track that has been selected in Cakewalk?
Is this the method you used to set up your Arturia keyboard? I know it comes with integration for many DAWs, but I don’t think Cakewalk is one of them. I still don’t have one ☹️ but I keep hoping...
Thank you so much for the video. Mostly,, your videos do help me a lot when it comes to cakewalk. But to setup DAW functionality for my midi keyboard, its not happening for me. I did understand many things explained here in this video, BUT I am not able to assign functions to my sliders, rotaries, buttons (i.e., record play/pause) on my ARTURIA KEYLAB 49 ESSENTIAL. Please help me in this regard if you can ASAP!! Thank you so much!!!
So this is the best video ever. I've had the KEYLAB61 MKII for a while and this is the first time I've used the transport controls to move things around. I somehow switched the WAI to the bus controls instead of the tracks, how do I switch it back? I pressed the 'Save' key under the DAW commands / user... but now I can't switch the WAI back to tracks. Thanks for the awesome video!
Hi Mike. Thanks for the great content (as per usual). I got my Arturia KeyLab 61 mkII Working with the MCU driver and turning off the handshake as you suggested. How did you get the fader on the right to control the Master fader in CW? All the others map nicely to track 1-8 in CW but the “Master” fader on the Arturia does some weird panning thing.
Hey Rob, try going into Utilities > Mackie Controller - 1 and then at the bottom left, select 'Bus' under the Master Fader section. Counter intuitive I know, but its worked for me on a number of controllers!
Hi Mike! This is the tutorial I've been waiting for, thanks for making it. But I'm still a bit confused. I see you're using an Arturia keyboard rather than the NI S88 you've used before. I have an NI A61 and despite following your instructions I still can get the transport buttons to work with CbB. Any ideas?
@@nickellis9251 hmmm, I was just reading that they were slow to get it to the mkii (but its on mki). But that was a year ago, so maybe start with a firmware update?
Hi, I'm a subscriber to your channel and I have a question. I'm using bias fx2 with a midi commander footswitch and I'm having trouble with the midi controller. Can't get it to work. I'm trying to toggle from a clean tone amp to a distorted amp. Any idea how I can make it work. I'd really appreciate your feedback. Thanks. Love your channel.
My Faderport might be broken as I can get the slider and pan knob to work, but none of the buttons. I tried the legacy Presonus Faderport and AZ drivers and got the same result. Nevertheless, thanks for doing what you can to help. There was a day when every controller of any kind supported Cakewalk, but none of them do anymore.
This worked form me using the M-Audio Oxygen Pro Mini. Disable Handshake allowed the transport controls to work. The only issue is now the the sliders and wheels give inaccurate results depending on the speed you move them. EDIT: If you set the DAW mode to Bitwig it works better.
hi Mike, thankyou so much for brings this topic on youtube, but im currently using alesis VI61, i searrch on the manual book and theres nothing talk about Mackie MCU mode. i tried all you've listed on the video but nothing works. the play stop pause fast forrward etc button nothing works. any tips?
Hey mike, love ur videos. Very informative and engaging. Have you every used the generic control surface option(vs maki)? I have a controller set up with that option and it controls tracks fine, but i cant get it to control busses.
Hello Mike I own a Behringer Xtouch and I wanna know if you have any solution to use it for nudge clips .. as it used with the native button which works only on Logic Pro !!
Hi !! amazing video but about makie control i still have doubts about , i have a arturia mk2 and once i could reach play and pause with the press buttons of the device , but there was a lot of options to set up. but some of them i could not set up Would you find annoying, to make a video of how to set up and use nicely the makie control in cakewalk? and which could be the possible erros to make once doing that........ kind regards thank you always for your help, you are the best!!
Hello Mike! I'm trying to use the DAW Command Center of my Arturia Essential 61 with CbB but I tried a lot of different videos and suggestions from FB page... Nothing seems to work. Since you use Arturia as well, I was hoping you can help me to find the solution here... Thank you a lot for your time and support!
Mike, great video. I have an X Touch and it set up and works exactly as you demonstrated with the MCU Pro. I am having an issue with two other older devices. I have an Alesis QS8.2 and a Digitech foot controller each plugged into a Midisport input. Everything is working but I want to use the foot controller as an alternate mod wheel. Am I correct that in order to use the keyboard and the foot controller at the same time I need to set the track inputs to all devices? When I do that the mod wheel on the keyboard and the foot controller are competing for attention and not predictably that I can tell. I have turned off "zero controllers at stop" but there are times when the mod wheel control on the track level is zeroed - and a EWHO Strings mod wheel patch outputs nothing until I operate either the Digitech, the keyboard mod wheel, the keyboard's volume pedal, or some combination of any or all to get stuff playing. Am I hoping for too much here with the foot control? ALSO... should I plug the keyboard into the X Touch Midi din connector and use that as my keyboard input? Having just read this question back to myself, I'm nearly sorry for asking it. TIA
awesome Videos very simplified and useful 🙏 but unfortunately None of them work at my MIDI controller #worlde orca Pad48 any Tipps for this one?! Thanks
Good Morning!!! very important to me was this video. One question ... I have an ICON QCON PRO and two ICON EX. How can I get these three control surfaces to work well? What driver do I need. And If I need it, where do I download this driver? I will appreciate a lot your help. Richard
Hello Mike - I know that you can`t cover all devices connected to Cakewalk ! - I have a Allen & Heath QU Mixer (QU32) - The Mixer is set to work via MIDI but I not able to connect the 2 devices for the remote funktion (rocording and playback works) - (I have installed the A&H driver and also the correct MIDI Channel and the protocoll as well [Mackie]) - Is it possible that you do a video to connect "Cakewalk with A&H QU Series" ? - By the way - I bought a 12 hour video (very good one) but the explanation about the remote funktion is not the one I need because the video describes A&H / Qbase ... (If the english sounds a bit starnge ... I`m from Germany) - BTW - Your videos are all the time great ! - THX
Hello. Akai Pro Advance 49 will be able to work with Cakewalk, I didn't really find this information on the net, maybe you will have an answer? I want to use via midi cable via Focusrite Clarett+2pre. Thank you)
Not directly related to today's topic but to MIDI controllers and Cakewalk in general I observe that, in the Preferences MIDI Devices section that many hardware and even software MIDI I/O sources have multiple entries, including one listed as "controller name (automap)". What is the significance of "automap"?
Mike, good evening. First, thank you for taking the time to put together this channel and curate this content. It's been tremendously helpful. Recently, however, I bought a Labkey 61 MKII, looking forward to the kind of DAW control you demonstrate in Cakewalk. Sadly, I cannot get this to work at all. I get the MIDI Keys input fair enough, but no DAW control at all. I tried all the fixes you suggested, but they still won't respond in CW. I'm starting to contemplate moving to another DAW...but I really like CW. I tried to find and install the MMcL drivers, but the link is down. Any other suggestions. Thanks again...great channel!
Hey Mike, I love your videos. I recently bought a WORLDE Easycontrol.9, and I can't make any sense of getting it working. I believe it has to use the ACT setup, although the ACT only gives you 8 faders to assign and the Easycontrol has 9. I have looked for special buttons to push to get it into Mackie mode, to no avail. I have gone on the ACT and assigned every single button and fader to do what it should and as soon as I turn cakewalk off and back on it doesn't work agian. It is frustrating. I have seen other people use these in Abelton and Reaper, so I assume it can be used in Cakewalk too. Any advice? Thanks.
I am thinking of Arturia Keylab essential 61 .It only has midi output.Will I be able to use Kontak and other virtual inst. that are not Arturia linked?
Thanks Mike for covering this topic. I have a Behringer X-Touch One and I love to use the fader, it's so much better than the mouse.
Important tip if you have a single fader device: Check the "Select highlights track" option. This will make sure that your single fader always works on the track you want.
You also want to have "Use Scrub+Bank ..." option checked for switching between tracks and busses.
Thank you! Great tips :)
Where is this option located? I'm thinking about going with a Behringer X-Touch One or the Presonus Faderport V2 (I don't have the money to buy any of the bigger machines) but have read a lot about issues with both devices not following the track selection in Cakewalk, which is still holding me back from pulling the trigger on either device. I really don't want to shell out any money only to be left with a controller that doesn't really let me control Cakewalk without any major hassles. Those boxes are meant to make things not only more hands-on but also faster, so a device that's severity limited in its abilities doesn't make any sense.
Thanks Mike. I have had my Keystation 61 for about 8 months and could not get the transport buttons to work. It was the "Disable Handshake" that got it working. Cheers mate.
Here's a nice ol' comment to help your video out because I've been searching for hours to get my controller back working after it bugged out for some reason! Top job, thanks!
I was hoping that you would go through the Cakewalk Generic Midi and ACT functions. I have an Alesis VI49 with lots of knobs, buttons, and transport controls have no idea how to synch them up. There's a surprising little amount of info out there and it seems like a waste of the new keyboard's potential
Absolutely agree. I've got a VL25 and am having the same issue.
For my Novation Impulse 49, I had to activate the "HUI (Beta)" protocol in the Mackie Control - 1 dialog. All works now, transport controls and knobs and faders in DAW mode to control volume, pan, effect sends etc. 😊 Thanks for pointing me in the right direction, Sir.
Thanks Mike. Helped quickly get me sorted for my Arturia keylab 49 for the most part. Loop doesn’t seem to work, and the 9th rotary knob just seems to be there for twiddling only…. No function. This is the first MCU enabler controller and I used to using ACT and setting up my own maps. The MCU utility doesn’t midi learn new buttons so a crash course in the finer workings in cakewalk if you get around to it! Thanks again for the quick primer. Very useful.
Hey Mike, I remember I contacted you after a previous video about problems I was having hooking up my Arturia Keylab 61 to Cakewalk and you very kindly told me about the Hand Shake option, which certainly helped. However I was still not entirely happy with the way it was working, or not working, especially after trying the keyboard with Ableton as an experiment just to check that there wasn't a problem with my PC and found it all worked perfectly. I then contacted Arturia support who informed me that Bands Lab hadn't got the MCU protocol set up properly. With that I contacted Band Lab and they told me that one of there engineers would look into it. That was back in February. There have been a couple of up dates from Band Lab recently, neither of which mentioned the MCU protocol problem, so I contacted them again to be told that their engineers are still looking into it. It is a shame when in every other respect I find Cakewalk a brilliant DAW, that something like this lets them down. Hopefully they will sort it out soon. Love your video, very informative as usual.👍
Wait for it !!! :D
I hope you did!
😂
@@CreativeSauce Oh yes, till the end of the video. 😀
The "End All Be All" when it comes the Cakewalk tutorials!
Mike....Miracle Man on the Altura Keyboard! thank you
Success! I set up my Zoom R8 to Cakewalk. It works fine as an audio interface but did not work as a control surface. Your tip on disabling the handshake cured the problem. Thank you.
Hey MIke, great stuff as always!! As some of the comments mentioned below, could you do one where you show how to connect external midi controller and set it in a way to make control changes in plugins? I think it would be an interesting topic to cover.. Thank you!!
Thanks ever so much Mike. This worked a treat for my Arturia 61 MKII. Needed all the steps you mentioned to make it work, including the 'disable handshake' and now all my controls work.
Thanks Mike, I'm using a Arturia Keylab Mkii and after this video this video I was finally able to get my hands on some of the control functions.
However I ran into some problems. When I use the MCU mode, when I press the Save or Undo button, the mackie control WAI color strip moves to the bus strips only and I can no longer control track strips, and there is no button to let me switch the WAI strip back to track strips. And the other buttons in the second row (In Out Metro) are functionless buttons in MCU.
Then when I changed the mode to HUI, I can control every track using the faders and knobs. However the master fader doesn't control the master volume in the bus strip. I've tried the solution you said in the comments and tried to Master Fader option from master to bus but it still doesn't work. Also, the write and undo button doesn't work in HUI, and the metro button somehow toggles the browser view, which is very weird.
I really wish that I can make the controller control the correct things in Cakewalk. Is there any way for me to guide the buttons to executing the correct functions, and solve the aforementioned fader problems? Thanks a lot!
Thanks for that great video - helped me a lot undestanding the different ways on using a midi-controller.
I have one question though - how do i map my midi-controllers physical buttons to certain VST-Effects? the keyboard itself (AKAI mini) is working flawlessly - but i dont get the knobs connected to let's say the reverb of an effect. regards
Thank you ! Very useful to set up my Arturia Keylabs Essential 49. The disable handshake did the thing.
The 'Disable Handshake' tip worked for me. I've just started learning on a Donner DMK25 Pro and that fixed my issues. Thanks! You got yourself a subscribe and a like for that.
Thanks for this Mike. This was a great one. It is a pity you did not have a Korg nanoKontrol2... no automated fader movement but it does the basic job. Thanks again.
Please keep making good content like this. You are a very good teacher teaching from the basic to advanced. So so so helpful for musicians like me. I owe you.
I have a Komplete Kontrol M32 and this worked for me. Had to choose the m32 DAW in and Out as the control surface in and out
Great you cover this topic! Even greater that you always cover interesting topics and give useful and helpful advice! Thanx quite a lot of times!
Thanks Mike , it was very informative. Could you also make dedicated video for connecting Arturia Keylab Essential 49 mk 3 with Cakewalk because I searched and found no videos for this.
You got me working! I'm using Cakewalk with a Novation Launchkey MK3 Mini. Had midi settings right, but when I went into Utilities and checked HUI, my Mini lit up in DAW mode! Thanks, Mike!! 😊 It comes (and is made for) Ableton (Lite) but I just don't seem able to like Ableton much.
I've just had the same experience, although I can't get the stop/solo/mute button to work. I'd also like to be able to control the plugins with it. Have you had any luck with either of these issues.
@@michelfouche4599 no afraid not, and I haven't messed with it now for quite a while. I don't recall, but I thought transport controls were working.
Thank you so much for your help. Now I can finally control the transport functions and mixer controls with my Keylab 61 mkII. 😁
Thank you so much - the "disable handshake" tip worked for me with my Zoom R8 - I may have just given up if it weren't for your tutorial
Thanks mike, it just went right the first instance, (plug and play style) I'm using a icon i-keyboard x And another subscriber
i saved it to watch later and i'm glad it did .....thanks Mike
🙏 Worked for the iCON iKeyboard 4X
Hi Mike - Thanks for some good tips from your vid - I have been trying to set up an M Audio Oxygen Pro 61 with Cakewalk. Using the Preset Editor and setting up Mackie I have some controls working but not all - I can't seem to get the Zoom button/function working from the keyboard - just wondering whether you have any experience with the Oxygen Pro (you recommend Oxygen on your Gear section) and whether there are any templates for this keyboard?
Hi Mike Just bought a Presonus io station 24c per your recommendation. The Mark Mcleod link to get the MCU drivers just seems to default to this page again. Doesn't go to the download page. Tried searching online for these MMcL Mackie Control #1 but can't find them anywhere. I do have the 24c working somewhat with just the Mackie Control selected in surface control setup marked with red btw. on the panel view It will show a block of eight channels at a time with a red color. Not sure where to go from here. Always love your videos, Thanks Will
Great vid brother and I was wondering how I control the bus knob with the MCU pro?
Thanks for this, I just got an Arturia Keylab Essentia 49 and this helped. I ended up using the BETA HUI mode for it and it seems to work well.
Cheers Mike , handshake worked with keystation 49 mk3
Your knowledge level on this is immense mike @CreativeSauce :) Thanks for sharing all of them in a easy understandable fashion.🙏
As always, great video! Thanks for sharing your knowledge!!
As always, very valuable information such as how to correct the classic bugs between Cakewalk and control surfaces. Thanks
Mike for home recording president! Thank you
thanks this might do the trick for my EZ Creator Fade controller ..I can see midi signals working but no faders moving nor start/-stop working..maybe disable handshake mode.
Very useful video. Here is an alternate way to access the preference configuration windows: While in the MIDI section of Cakewalk Preferences first open the Control Surfaces window and then you can select the "MIDI Devices" button to open the MIDI Devices window.
Brilliant video Mike and it seems that the McLeod Mackie updates have been integrated into Cakewalk (except for the multiple Mackie device stuff).
Anyway I now have my Novation SL MkIII working in 'InControl' Mode with Cakewalk after following your demonstration. The only thing different for me was to select the protocol 'HUI (Beta)' on the 'Mackie Control - 1' pop-up instead of 'Mackie Control Universal'. Works like a bought-one :)
Brilliant. I was missing the select the protocol 'HUI (Beta)' on the 'Mackie Control
Excellent video. Does UF8 controller works with Cakewalk
Cakewalk is so good.
Hi Mike, I've been working to get a Novation LaunchKey 88 (mk3) going with Cakewalk and your video was a big help, thanks! In order to get my transport controls, faders, buttons, etc working I had to switch the Utilities/Mackie Control option for Protocol away from "Mackie Control Universal" and over to ""HUI (Beta)". While this works, it is not perfect as sometimes a fader movement (or other control) is missed requiring an additional movement to get the new value to register. I'm guessing that since it says "Beta" right in the option label, this mode isn't 100% stable yet, and may never be! Oh, well, it works well enough for my needs, and the note midi control is fine so it's a win!
Thank you. I never thought I'd see the day.
Mike you're just a great man! thank you!
Thank you for making great and high quality tutorials. You are very good at explaining! I watched this video with great interest since I have a two weeks old M-Wave SMC-PAD with buttons for play, pause, record and so, that I am still trying to configure. Cakewalk by Bandlab is not responding to anything else but the pads. Is there anyhow in Cakewalk by Bandlab that I can monitor the raw MIDI signals from any connected devices to see if anything is going into Cakewalk from the M-Wave in the first place, and/or which MIDI / CC / note, commands it sends? 🤔
Hi Mike. I bought a M-audio oxygen pro mini and I am unable to control remotely from it. As long as it works with your method I'm going to look for you anywhere from Barcelona and give you a kiss!😅
Thanks Mike. Much appreciate your efforts.
Great info Mike! I love all the new gear that's out but, I also love my rack full of great old modules. I control them with a Kurzweil controller linked to a MOTU midi express128. I just purchased the Arturia Keylab 61 Essential. Is there a way I can use the Keylab USB to control plugins and the MOTU to control my rack midi modules at the same time?
Any ideas on how to get an Alesis QX25 to control volume faders and pan knobs? Thanks
Thank you so much Mike!
Hi Mike. Thank you for the video. I have an oxygen61 from M-AUDIO and I can't get it to work as a surface controller in Cakewalk. Can you help me with this model?
Mike, any chance of getting details of exactly how you have your Pro G2 set up, like how to check and set up the buttons, how you have your buttons assigned. You have the experience, intelligence and patience that a number of us are short of, so any help would be greatly appreciated at least, by me. Thanks. Love your vids and the abundance if knowledge you set free to us acolytes !!
another great video. unfortunatly for me, didnt work with my Alesis QX49. once i set up the output as well i cant use as piano anymore, no soud, and only 1 knob do the paning and in the oposite direction....any tip? thanks
Great video, thanks so much Mike
Great video! Does the novation launchkey 61 MK2 supports this MCU?
Hi, Thanks to this video my Launkey MKIII mini works at last with most of the Cakewalk controls. My experience was slightly different, I had to set the Mackie Control to the HUI protocol wich is in beta now in Cakewalk, instead of disabling the handshake. So if the handshake didn't work look at that one! It did the miracle for me!
Hi Alfred - can you point me to information on how to get the LaunchKey MKIII set up? You mentioned HUI protocol in the Beta. How I do I get access to the beta. I would love to make this work! Thanks.
@@AharonRabinowitz Go to 8:50. When the dialog setup opens under the column F1 through F8 there's a choice box. Set that to HUI (Beta). For the rest all the info is in here in this video.
@@alfredgrupstra Thanks. But my confusion is coming before that. 1. what are you choosing for the controller/surface (since they don't list our keyboard there)? and 2. What are you choosing for Input Port/Output Port? Thanks!
Love your videos, I am a Cakewalk and Sonar Plat user. I recently purchased a Arturia KeyLab Essential 49 mk3 and love it, however, I cannot seem to get the control surfaces to work in Cakewalk or Sonar. I have followed your video here, which is helpful, but I b=need some other direction. I have attempted multiple time to create profiles using The MIDI Control Center, but to no avail. Any suggestions how to proceed?
Hi Mike, been learning from your cakewalk tutorials, thank you so much. Currently, I have an old Novation launch key 25 Mk2. I can't seem to make it work with any of the built-in VST midi's that came with Cakewalk. Tried the SI-bass, SI-strings and others. It only response to my PC keyboard. All the Midi drivers input/output are set correctly. My MIDI works fine when using Kontak player & Komplete Kontrol. Hope you can help me out.
Thanks Mike, rght now i want co use cakewalk with a wing console from behringer but, i cant to connect the second XT, besides msmcleud software its not available
Hi Mike, do you have any ideas how to manually assign MIDI knobs to certain knobs and faders in the differnet cakewalk views
or even inside the stock plugins like the different SI-Instruments or the Cakewalk TTS-1?
I remember that it was very easy to get this done in Ableton a vew years ago, when I had a look at a demo version of it.
I've got an Akai MPK mini MKii and a Nektar Impact LX88+
Thank you for the very helpful videos about cakewalk and all the possibilities it comes with!
Mike, Thank you for what you do! Can you PLEASE HELP?
Iam trying to use an Akai Professional MiDiMiX Midi Controller and I can not for the life of me figure this out.
I've never had trouble like this with anything. Thanks to your video here, a couple random buttons light up and do random things, but only a couple and they do not line up or make sense. Most still do nothing. I can't find anything else online about it. You are my only hope!
Hi Mike, I've been looking forward to this video and you didn't disappoint! Thanks again for a clear, well-paced explanation. I've been holding off buying the Presonus IoStation 24C because of Cakewalk compatibility concerns. This video has reassured me and I've gone ahead and ordered it! I will let you know how I get on with controlling Cakewalk with the Presonus, and I'm also looking forward to trying Studio One bundled with it. Again, many thanks, much appreciated!
So did you get the IoStation to work with Cakewalk? What about following track selection? Does the device focus on the track that has been selected in Cakewalk?
Thanks Mike, great tutorial and a big help, much appreciated!!
Is this the method you used to set up your Arturia keyboard? I know it comes with integration for many DAWs, but I don’t think Cakewalk is one of them. I still don’t have one ☹️ but I keep hoping...
Yes, this is the method I used for my Arturia KeyLab 88 Mkii :)
Thank you so much for the video. Mostly,, your videos do help me a lot when it comes to cakewalk. But to setup DAW functionality for my midi keyboard, its not happening for me.
I did understand many things explained here in this video, BUT I am not able to assign functions to my sliders, rotaries, buttons (i.e., record play/pause) on my ARTURIA KEYLAB 49 ESSENTIAL. Please help me in this regard if you can ASAP!!
Thank you so much!!!
It totally worked. Thanks a lot !!!
Cakewalk and Presonus studio 24C Audio Interface can be use together
So this is the best video ever. I've had the KEYLAB61 MKII for a while and this is the first time I've used the transport controls to move things around. I somehow switched the WAI to the bus controls instead of the tracks, how do I switch it back? I pressed the 'Save' key under the DAW commands / user... but now I can't switch the WAI back to tracks. Thanks for the awesome video!
Rebooting the ARTURIA worked, but that seems a little extreme.
Hi Mike. Thanks for the great content (as per usual). I got my Arturia KeyLab 61 mkII Working with the MCU driver and turning off the handshake as you suggested. How did you get the fader on the right to control the Master fader in CW? All the others map nicely to track 1-8 in CW but the “Master” fader on the Arturia does some weird panning thing.
Hey Rob, try going into Utilities > Mackie Controller - 1 and then at the bottom left, select 'Bus' under the Master Fader section. Counter intuitive I know, but its worked for me on a number of controllers!
@@CreativeSauce Thanks Mike, I will try that out!
@@CreativeSauce That worked a treat! Mike, you are a gentleman!
Wowww Excelente !!! gracias
Hi, thank you very much for you videos!!! I am trying to sync an Alesis SR 16 with Cakewalk, put nothing happens. Any idea?
Hi Mike, the link for the mark mccloud driver seems broken. If possible can you steer me in the direction of downloading this option? Cheers mate ✌️
Hi Mike! This is the tutorial I've been waiting for, thanks for making it. But I'm still a bit confused. I see you're using an Arturia keyboard rather than the NI S88 you've used before. I have an NI A61 and despite following your instructions I still can get the transport buttons to work with CbB. Any ideas?
Hi Nick, you must have me confused with some other charming UA-camr, as I havnt used the S88 in my videos. Do you have mk1 or 2?
@@CreativeSauce Sorry Mike, I thought you had. I bought mine under a year ago so I guess it's a Mk2.
@@nickellis9251 hmmm, I was just reading that they were slow to get it to the mkii (but its on mki). But that was a year ago, so maybe start with a firmware update?
Hi, I'm a subscriber to your channel and I have a question. I'm using bias fx2 with a midi commander footswitch and I'm having trouble with the midi controller. Can't get it to work. I'm trying to toggle from a clean tone amp to a distorted amp. Any idea how I can make it work. I'd really appreciate your feedback. Thanks. Love your channel.
Love it🎼
~Gratitude🕊️
Hey Mike can u share the keyboard integration of ur keylab mk2 ,I too have that😅
so excited but then; no mcu pro option in cakewalk device . can i use m-audio mk3 to control cakewalk?
My Faderport might be broken as I can get the slider and pan knob to work, but none of the buttons. I tried the legacy Presonus Faderport and AZ drivers and got the same result. Nevertheless, thanks for doing what you can to help. There was a day when every controller of any kind supported Cakewalk, but none of them do anymore.
This worked form me using the M-Audio Oxygen Pro Mini. Disable Handshake allowed the transport controls to work. The only issue is now the the sliders and wheels give inaccurate results depending on the speed you move them.
EDIT: If you set the DAW mode to Bitwig it works better.
Mike, is that desk custom built or did you buy it somewhere?
Hi Dan, I designed and built it myself. You can see here: ua-cam.com/video/_KFrNO-7cN0/v-deo.html
hi Mike, thankyou so much for brings this topic on youtube, but im currently using alesis VI61, i searrch on the manual book and theres nothing talk about Mackie MCU mode. i tried all you've listed on the video but nothing works. the play stop pause fast forrward etc button nothing works. any tips?
Hey mike, love ur videos. Very informative and engaging. Have you every used the generic control surface option(vs maki)? I have a controller set up with that option and it controls tracks fine, but i cant get it to control busses.
Hello Mike I own a Behringer Xtouch and I wanna know if you have any solution to use it for nudge clips .. as it used with the native button which works only on Logic Pro !!
Hi !! amazing video but about makie control i still have doubts about , i have a arturia mk2 and once i could reach play and pause with the press buttons of the device , but there was a lot of options to set up. but some of them i could not set up Would you find annoying, to make a video of how to set up and use nicely the makie control in cakewalk? and which could be the possible erros to make once doing that........ kind regards thank you always for your help, you are the best!!
Hello Mike!
I'm trying to use the DAW Command Center of my Arturia Essential 61 with CbB but I tried a lot of different videos and suggestions from FB page... Nothing seems to work.
Since you use Arturia as well, I was hoping you can help me to find the solution here...
Thank you a lot for your time and support!
Mike, great video. I have an X Touch and it set up and works exactly as you demonstrated with the MCU Pro. I am having an issue with two other older devices. I have an Alesis QS8.2 and a Digitech foot controller each plugged into a Midisport input. Everything is working but I want to use the foot controller as an alternate mod wheel. Am I correct that in order to use the keyboard and the foot controller at the same time I need to set the track inputs to all devices? When I do that the mod wheel on the keyboard and the foot controller are competing for attention and not predictably that I can tell. I have turned off "zero controllers at stop" but there are times when the mod wheel control on the track level is zeroed - and a EWHO Strings mod wheel patch outputs nothing until I operate either the Digitech, the keyboard mod wheel, the keyboard's volume pedal, or some combination of any or all to get stuff playing. Am I hoping for too much here with the foot control? ALSO... should I plug the keyboard into the X Touch Midi din connector and use that as my keyboard input? Having just read this question back to myself, I'm nearly sorry for asking it. TIA
awesome Videos very simplified and useful 🙏
but unfortunately None of them work at my MIDI controller #worlde orca Pad48
any Tipps for this one?!
Thanks
Good Morning!!! very important to me was this video. One question ... I have an ICON QCON PRO and two ICON EX. How can I get these three control surfaces to work well? What driver do I need. And If I need it, where do I download this driver? I will appreciate a lot your help.
Richard
Great info!
Hello Mike - I know that you can`t cover all devices connected to Cakewalk ! - I have a Allen & Heath QU Mixer (QU32) - The Mixer is set to work via MIDI but I not able to connect the 2 devices for the remote funktion (rocording and playback works) - (I have installed the A&H driver and also the correct MIDI Channel and the protocoll as well [Mackie]) - Is it possible that you do a video to connect "Cakewalk with A&H QU Series" ? - By the way - I bought a 12 hour video (very good one) but the explanation about the remote funktion is not the one I need because the video describes A&H / Qbase ... (If the english sounds a bit starnge ... I`m from Germany) - BTW - Your videos are all the time great ! - THX
Hello. Akai Pro Advance 49 will be able to work with Cakewalk, I didn't really find this information on the net, maybe you will have an answer? I want to use via midi cable via Focusrite Clarett+2pre.
Thank you)
Not directly related to today's topic but to MIDI controllers and Cakewalk in general I observe that, in the Preferences MIDI Devices section that many hardware and even software MIDI I/O sources have multiple entries, including one listed as "controller name (automap)". What is the significance of "automap"?
Mike, good evening. First, thank you for taking the time to put together this channel and curate this content. It's been tremendously helpful. Recently, however, I bought a Labkey 61 MKII, looking forward to the kind of DAW control you demonstrate in Cakewalk. Sadly, I cannot get this to work at all. I get the MIDI Keys input fair enough, but no DAW control at all. I tried all the fixes you suggested, but they still won't respond in CW. I'm starting to contemplate moving to another DAW...but I really like CW. I tried to find and install the MMcL drivers, but the link is down. Any other suggestions. Thanks again...great channel!
you mean keylab mkii?...I use the same . Works great in studio one but im scratching my head with cakewalk bandlab
Hi Mike.... I just added an Arturia Minilab 3 as a controller. But I can't get it to work. Have you ever used it?
Thanks Jose Luis
Hey Mike, I love your videos. I recently bought a WORLDE Easycontrol.9, and I can't make any sense of getting it working. I believe it has to use the ACT setup, although the ACT only gives you 8 faders to assign and the Easycontrol has 9. I have looked for special buttons to push to get it into Mackie mode, to no avail. I have gone on the ACT and assigned every single button and fader to do what it should and as soon as I turn cakewalk off and back on it doesn't work agian. It is frustrating. I have seen other people use these in Abelton and Reaper, so I assume it can be used in Cakewalk too. Any advice? Thanks.
Hello dear there is a control room section like in cubase?
Hey Mike! How do like that Icon Qcon Pro G2? I'd like to see a review of that soon.
He’s already done one and it looks great. Mines on order
I am thinking of Arturia Keylab essential 61 .It only has midi output.Will I be able to use Kontak and other virtual inst. that are not Arturia linked?
Any control for iPhone? The touchdaw only operates for android?