Wow that pretty much looks like a genuine Seiko Turtle. It hacks, handwinds, the bezel sounds tiny, the chapter ring is misaligned. That's pretty much the same stuff you get from the original factory!
I own a real one and I bought the Wish one as well. I’ve done my fair share of modding Seiko’s. I can tell you that after I stripped down the Wish version, you will find it doesn’t have the fat Seiko spring bars for starters. The drilled holes in the lugs will not accommodate fat Seiko bars either. I tried. One huge tell tale it’s fake is the click-spring underneath the bezel. When you pop the bezel off of a real bezel, you’ll see it’s a circular ring with raised pieces of metal that fit into the underside of the bezel. The Wish version’s bezel is literally impossible to remove because they have some interwoven wire squeezing the bezel down to the case. Not caring for marring the Wish version, I managed to remove the bezel insert and that’s how I was able to see the underside of the bezel and saw the bogus click-spring. Now! I thought it would be fun to see if I could swap my bezel inserts between the real and the fake. The fake will fit into the original bezel however it is too slim and sinks too low into it, leaving a raised edge. If you put the real bezel insert into the fake version, the insert stands too tall. Yes, the font is wrong, the stated movements (on the dial and the internal rotor contradict themselves) and everything else wrong mentioned in the video. It is a damn fine fake and can fool even the best Seiko fans until looked at VERY closely (which if someone is studying your watch THAT close while on your wrist, they may have a problem lol). Bottom line, Seiko’s are great and that Wish version looks great. But for me, I can’t wear a fake because I know it’s a fake. Like someone wearing a fake Rolex. But worse because good Seiko’s are still considered only entry level watches. So why not just get a real one?
Tom, do you know if the case and bezel are actually stainless steel and if you can install an actual Seiko bezel spring and bezel on the fake? I'm curious about the interchangeability and if the fakes would be a good base for a mod.
The model you have with the red minute hand is SRP789 and does actually come with a metal bracelet while the 779 has a regular white hand and rubber strap.
Given how difficult it is to get oem seiko dials, for modding, it might be worth getting one of these just for that Didn’t get a close up of the dial, is it decent?
lenny! where did u get the band for the parnis and what size where can i get some cheap nice bands like that... that one convinced me to grab myself a parnis!
Seikos usually always have alignment issues, thanks for this information though, very useful, also usually the Saturday text in the day window is blue, another good way to tell.
Saw another vid, the weight inside the movement has a small piece of metal glued to the weight that makes it look like a genuine seiko movement. On the real seiko weight the word Japan does not appear. Mind you, behind the metal glued to the drum revealed an acutal seiko nh36 movement but not the 4A. On the closeup you provide I think you can see that the weight looks like it has a raised edge, hence the little metal thing they glued to the weight of the movement.
what is the tell tale sign of fake? from the UA-cam, I could only see that the SEIKO font on the case back looks a bit different, but hard to tell from the above
I have one. I was curious also. The back and face have two different movements listed, and surprise, it has neither one. Mine had some no-name, cheap/fake guts inside. Was not an NH36 movement and doubt one would fit. It keeps poor time. All over the map. Poor lume.
I bet there is a thin metal piece stuck to the balance wheel it you pry it off it will say nh36 instead of 4a36 same movement but nh36 is the sold sperate version, crazy how close it is.
Besides the movement everything looks genuine. Crappy bezel that sounds like a toy, missaligments everywhere and stamped clasp is normal thing to every genuine seiko out there.
I’ve purchased 2 turtles from Wish. The first one I bought, a $50 Nemo Orange is a complete pile of junk. Listing said it was automatic.... it’s quartz. It’s smaller than a gen in every direction but just barely. It’s rough, band is complete garbage, clasp is small, Logo on the band and caseback is laser etched and uses the wrong font, bezel is wonky. Etc etc... The second just arrived yesterday. A $55 black/silver/gold SRP775J1 is beautiful. Similar quality to yours but the bezel is 120 clicks of perfection. The band and clasp looks similar to yours and I can assure you it’s just as nice (or crappy) as the genuine. My chapter ring isn’t crooked which is common on the genuine. The steel they used is high quality and has the titanium-like appearance just like the genuine. The case back is perfect. The only tell tale signs it’s a replica are: #1 the lume Pip isn’t recessed like the genuine. Every single Seiko on wish gets this wrong. #2 only the first few links are drilled on either side of the clasp. Every link is drilled on the genuine. #3 the shiny flat edge of the crown’s diameter is wrong. It’s smaller on the genuine. #4 the bezel has a line that runs around the outside edge exactly in the middle. The genuine’s line is closer for the top.
Do you know if any or most of the cases that they claim are stainless steel are actually that or is it a mix of stainless and cheaper steel, perhaps chromed steel?
See this one actually looks solid and has a automatic movement but I bought one off Wish.com and it said in the description and stock images it was a "Automatic" upon receiving it light like one of them fake $15 Rollies and dial said automatic but was a ticking quartz movement. Great review.
If this is a copy, its a seiko srp789k1 copy. The movement looks genuine, the case looks genuine, the bezel looks genuine but the dial does not. It says nh35, and it should say 4r36 on it. Original Turtles have misaligned chapter rings. I sell seikos as an authorized deeler and it looks very genuine to mee, it looks just used, its possibly an used seiko with a new dial and a scrap movement. The srp789k1 in this video looks like one from 2016 for many reasons to write here now. And this seiko goes for 260-300 dollars, not 400.
@@ericsmith1878 Most of the time when you buy a fake seiko the case is original but used, thats the problem. I once got a seiko for service from a customer, it was fake, the case was corroded from the inside and all beat up. But it was only 2 months old. They destroy the seals and the screw of the caseback. I dont know how. Maybe just buy a cheaper seiko, a lot to choose from.
@Haxomen The clasp for the bracelet looks very different from what i've been able to see online. there is a shroud or a little part that extrudes before the bracelet starts on the 'clasp guard' side. please shed some light on this.
@@shineegtspc Yes the clasp is not original because it doesnt have the divers extension that you are seeing on the online pictures. But the links, endlinks and clasp are looking original, only the diver extension is not there.
The 4R36 is the Seiko branded movement. The NH36 is the non-Seiko branded movement. Usually will state TMI "Time Module Inc" on the NHXX movements. I wouldn't be surprised if there are now Chinese clones of the NH35/36 movements.
I was just on the wish app and saw this watch for 57.00.They Retail for like 400.i didn’t know they fake Seikos.Seiko is notorious for horrible QC(ESP the Chapter Rings) so that’s kinda normal.BTW Love the Parnis.I have a Parnis (Stowa) Clone and a Panerai Clone.Owned both over 2 years and they work perfect.I was looking to get the Batman GMT too.Ive mentioned these watches on other UA-cam channels and it brings out the Watch Snobs🤣🤣🤣.IDC,I’d rather spend 75.00 on a Parnis Flieger that 99% of ppl couldn’t tell the difference between that and a 1200.00 Stowa.The dials are both sterile.Great Video👍🏻👍🏻👍🏻
the most obvious clue is that on the dial it says "NH36" which is a movement Seiko sells as a stand alone to anyone who wants to build a watch. IF you look in the back, it says 4R36. That right way shows the inconsistency. Real Turtles show "4R36" on the their dials. The other most common clue is on the inside of the bracelet, the very first part of it connecting to the case, should have engraved "631". On this fake, as shown, there are no markings. As far as the rotor is concerned, you will find that it's a thin piece of aluminum that has been glued on the original NH36. These people are very clever! lol
The movement really is an NH36A, they just put a razor thin 4R36 cover on the rotor wheel, you can peel It off. Sounds mad but these NH36 equipped fakes are much better value than a real one, but If I'm buying a turtle I'd get a Steeldive from Aliexpress.
I have a fake Seiko I bought on wish. You can only change the date forward. You can't make it go back a date, and it came a date ahead. Had to go through a whole month to change it. I like it very much though. It looks good on my wrist
For a 70$ watch replica its pretty decent and catch the eye lol Im curious can we use some parts to a real deal like a skx case? Like your style man, great content and good entertainer. Salut from portugal
bruno ferreira Thanks man! That means a lot. I don’t know about the bezel but I’d venture to say the dial and hands are compatible because it uses the nh3x movement.
@@lennyscheapwatchchannel2099 thanks for replay brother, Well only dial and hands dont justify the 70$ but if the case have the same measurements of the real deal...that was something. But is a pretty nice feiko 🤪
bruno ferreira In one of my other videos I bought an aftermarket bezel to modify my fake skx and in the video I said the bezel didn’t fit. I assumed it was because the case was also fake. I just tried to put that same bezel on a real skx case and it didn’t fit either! So I’m thinking I just got a bad bezel. It might be compatible, and I’m waiting on another bezel from another manufacturer so we shall see!
just paid $38 with promo code and shipping included for this....worth every penny just for the original Seiko movement inside. I am using it as a training tool for removing the crystal etc....
Good Video man, thank's. I can tell at least three differences from the original: 1. On the fake watch, the top spot on the dial is not carved. You can see the glowing material is over the dial on that spot on the fake one. 2. The original has much more text under 6 o'clock, the fake one it has a brief Japan.... text. 3. The original strap has a diving extension area, wich the fake doesn't. Regards.
Weird. The dial is branded with Seiko and the Prospex logo but uses the NH36 name which is not the name Seiko uses for this movement (Seiko uses the reference 4R36 for this movement). None of this makes any sense.
I bought the same and i ordered padi versión. I bought cocktail time in White but second hand is not blue . Blue cocktail un wish has White date window but movement in wish fake watche are very fine ones. Turtle bezel works a lot of play. I hace lots of original seikos and this ones are funny.
@@lennyscheapwatchchannel2099 4r36 is usually put in Seiko if made by Seiko and nh36 who's is exactly same is usually sold to other venders who want to use this movement ,they both were either made in Japan or Malaysia and stamped on it and if no stamped it's a copy made in China
Could it be possible that they are the real thing, but they did not pass the QC instead of throwing them away they get boxed and sold to a third party who sells them on wish?
That would be awesome....but no,this watch cames with the original 4r36 movement,and if you want to replace something on it the oen parts dont fit,for example the bezel dont have the same spring than the original and its flimsy,i assume that it dont have iso 200meters too.. ...for all and all its cheap nice replica with a good movement
Can you do a water/swimming test on the fake one and see how does it stand? I would rather torture a fake one to water activities than the original one lol. So, can you test that and tell?
Not able to differentiate for people who do not have the real stuff. It will be easier for viewers to understand better when compared the differences between real and fake.
This model comes with a steel bracelet, may be with a rubber strap too. My turtle , bougt from a official dealer , was on a steel bracelet.The shown fakeseiko do have very thin spring bars, the original does have the fat ones. What kind of people are buying fake seikos? There must be a lot of the them out there, otherwise scamers would not fake seikos.
I got me one of the wish for $57 and i am shure it is fake everything lines up nicely. On my arnie not a single thing lines up that is how i know it's original😉.
There are dozens of these on eBay, look for the dial text, it has NH35/36 on it. I've reported dozens of them to eBay and they do nothing. They should have a 4R36.
@@lennyscheapwatchchannel2099 The real one doesn't say NH36 it days 4R36. eBay is full of fakes that say NH. NH is the movement Seiko makes for third parties, precisely the same as a 4R just unbranded. I have two legit turtles they both say 4R36. If anybody has any doubts about legitimacy of a Turtle on eBay ask the seller for a dial close up, doesn't mean it's real but all the fakes I've seen have the wrong dial text.
@@lennyscheapwatchchannel2099 No worries dude, I just wanted to make sure people know what they're getting 👍🏻 some of those fakes are very good and I have had half a dozen watches with NH35 and 36s they're great value movements.
@casiotechI Yeah, I've had four turtles now and all original but the bezel insert is always an easy tell as well. Same with SKX. Might not means it's a fake as such, just not original.
could it be possible that these are actually real seiko's that did not get passing grades during QC? i just can't make sense of any fake watch making enterprise buying a genuine movement and sticking them into fake cases.. it jut doesn't add up to good cents....
@@skipast75 well, I don't know how many watch enthusiasts can you bump into on a everyday level. Nobody will bloody have a single idea if it's a fake or not
TPD Gaming I love replicas. I can actually wear them and not spend the day worried about scratching up or losing them. I really wish someone would make a 1:1 Grand Seiko. Wish is packed with 100s of knock off Seikos . Half are junk. The other half are really well done. There is 1 Grand Seiko on Wish. The logo is really well executed but the rest of the watch is rubbish.
@@skipast75 do you have personal xp with some od the good ones. I am looking for one and I can't tell which one is the best deal and which one is not a bust/screw-over
Seiko parts are made in China unless it's very high end ,watch movement are assembled in Malaysia ,it's very easy to clone a Seiko and so are the Swiss made watches too , almost 40 percent of their parts are made 8n china
More than 40% is made in china for most Swiss under $3000..many are entirely made of China parts (Crystal, dial,case, bracelet, hand) besides movement but technically counts as Swiss as long as value added ends up 40% which included r&d, prototyping, and final.assembly and inspection..very rare to fiind 100%Swiss under 10k and even those are entirely machine made with min..hand finish .
I was gonna build an skx and was thinking of using one of these as the base. If I'm replacing the bezel, crown, dial, hands, crystal and strap anyway I don't wanna drop $300 on the base watch.
I actually dont have a problem with it. Its not a high end rolex or anything its a Seiko. The movement looks good. I think only an idiot would think he can get a 400 watch on a wholesale chinese app for 70 dollars...from China. I bought one but I don't expect it to last more than 2 or so years. Ill get something different or maybe a real one at that time if my pocket decides to play nice.
@@lennyscheapwatchchannel2099 to me that's the most important part. If it's not an automatic movement I won't keep it. It should arrive in a month or so. Just ordered it. Thanks for the review mate. Good job.
Where can you buy these? Wish seems useless because you cannot even ask questions from seller to find out what kind of fakes they are selling :-) Many of them are so poor that they may even have a quartz movement.
Who makes a copy of a watch that costs £350 new and boxed by using parts that cost £150 minimum. Surely not worth yhe effort. Making a personal mod yeh but a copy for profit I doubt. I've got a nemo that I paid £250 last week but it's got the 3 colour hands Japan movement non Ltd back and what looks like a copy dial. Oh and a white box not the black orange one. Even the stamped back cost over £100 and thats not Ltd edition. These are just mods not copies
Something like this would only be worth it if they have a very cheap but high quantity wholesale deal on the cases, movements, and other parts. It's easy to get all of these wholesale in large numbers yourself actually, and if you could find some REALLY cheap labor to slap it all together (which I suspect they do in China) then you could make some money. Especially something that's sought after like some of these Seikos. Apparently worth it to someone- not me for sure haha
I would had been happy with that. I bought the same one from Wish but it came with quartz movement even though it said on the listing that it comes with 4r36 . Dodgy bastards!
First one I ordered was also quartz despite the ad stating "automatic". I was refunded on that one. And actually, it keeps good time. I use it on a Nato strap to knock around at work in.
Wow that pretty much looks like a genuine Seiko Turtle. It hacks, handwinds, the bezel sounds tiny, the chapter ring is misaligned.
That's pretty much the same stuff you get from the original factory!
Granted the Click Bait "Fake" title gave it away, but as soon as saw the dial I knew it was a fake.
@@BernardManansala I call bs
I own a real one and I bought the Wish one as well. I’ve done my fair share of modding Seiko’s. I can tell you that after I stripped down the Wish version, you will find it doesn’t have the fat Seiko spring bars for starters. The drilled holes in the lugs will not accommodate fat Seiko bars either. I tried. One huge tell tale it’s fake is the click-spring underneath the bezel. When you pop the bezel off of a real bezel, you’ll see it’s a circular ring with raised pieces of metal that fit into the underside of the bezel. The Wish version’s bezel is literally impossible to remove because they have some interwoven wire squeezing the bezel down to the case. Not caring for marring the Wish version, I managed to remove the bezel insert and that’s how I was able to see the underside of the bezel and saw the bogus click-spring. Now! I thought it would be fun to see if I could swap my bezel inserts between the real and the fake. The fake will fit into the original bezel however it is too slim and sinks too low into it, leaving a raised edge. If you put the real bezel insert into the fake version, the insert stands too tall. Yes, the font is wrong, the stated movements (on the dial and the internal rotor contradict themselves) and everything else wrong mentioned in the video. It is a damn fine fake and can fool even the best Seiko fans until looked at VERY closely (which if someone is studying your watch THAT close while on your wrist, they may have a problem lol). Bottom line, Seiko’s are great and that Wish version looks great. But for me, I can’t wear a fake because I know it’s a fake. Like someone wearing a fake Rolex. But worse because good Seiko’s are still considered only entry level watches. So why not just get a real one?
Kinda like the same with the INVICTA pro divers? Bezels
casiotechI you know, I never actually checked the lume! I’ll do that today when I get home from work and let you know.
So the lume is there but nowhere near the quality of the super luminova Seiko uses. The fake one dims SUPER quick!
Tom, do you know if the case and bezel are actually stainless steel and if you can install an actual Seiko bezel spring and bezel on the fake? I'm curious about the interchangeability and if the fakes would be a good base for a mod.
I purchased one recently. The Padi. For a Copy watch it looks good. not sure I'll keep it though. BRRRR!
They fake so good, the chapter ring is misaligned the same way the original one
The model you have with the red minute hand is SRP789 and does actually come with a metal bracelet while the 779 has a regular white hand and rubber strap.
Given how difficult it is to get oem seiko dials, for modding, it might be worth getting one of these just for that
Didn’t get a close up of the dial, is it decent?
lenny! where did u get the band for the parnis and what size where can i get some cheap nice bands like that... that one convinced me to grab myself a parnis!
Seikos usually always have alignment issues, thanks for this information though, very useful, also usually the Saturday text in the day window is blue, another good way to tell.
Saw another vid, the weight inside the movement has a small piece of metal glued to the weight that makes it look like a genuine seiko movement. On the real seiko weight the word Japan does not appear. Mind you, behind the metal glued to the drum revealed an acutal seiko nh36 movement but not the 4A. On the closeup you provide I think you can see that the weight looks like it has a raised edge, hence the little metal thing they glued to the weight of the movement.
Thanks for the video. I saw a watch on classifieds that came with that weird looking dial and I suspected it was a fake.
Excuse me sir, can swim in ocean not original padi? Thank you for your answer...
what is the tell tale sign of fake? from the UA-cam, I could only see that the SEIKO font on the case back looks a bit different, but hard to tell from the above
I have one. I was curious also. The back and face have two different movements listed, and surprise, it has neither one. Mine had some no-name, cheap/fake guts inside. Was not an NH36 movement and doubt one would fit.
It keeps poor time. All over the map.
Poor lume.
I bet there is a thin metal piece stuck to the balance wheel it you pry it off it will say nh36 instead of 4a36 same movement but nh36 is the sold sperate version, crazy how close it is.
What are your thoughts on the Seiko so far
Hi, how's the lume in dark? They sell also fake Citizen divers, maybe I give it a try just for fun.
Hello, Where did you get the NATO strap? Who makes it?
Besides the movement everything looks genuine. Crappy bezel that sounds like a toy, missaligments everywhere and stamped clasp is normal thing to every genuine seiko out there.
How is the lume on this rep?
I have used this and tested 100mtr water depth for 30mins...awesome
I’ve purchased 2 turtles from Wish. The first one I bought, a $50 Nemo Orange is a complete pile of junk. Listing said it was automatic.... it’s quartz. It’s smaller than a gen in every direction but just barely. It’s rough, band is complete garbage, clasp is small, Logo on the band and caseback is laser etched and uses the wrong font, bezel is wonky. Etc etc... The second just arrived yesterday. A $55 black/silver/gold SRP775J1 is beautiful. Similar quality to yours but the bezel is 120 clicks of perfection. The band and clasp looks similar to yours and I can assure you it’s just as nice (or crappy) as the genuine. My chapter ring isn’t crooked which is common on the genuine. The steel they used is high quality and has the titanium-like appearance just like the genuine. The case back is perfect. The only tell tale signs it’s a replica are: #1 the lume Pip isn’t recessed like the genuine. Every single Seiko on wish gets this wrong. #2 only the first few links are drilled on either side of the clasp. Every link is drilled on the genuine. #3 the shiny flat edge of the crown’s diameter is wrong. It’s smaller on the genuine. #4 the bezel has a line that runs around the outside edge exactly in the middle. The genuine’s line is closer for the top.
In some commercial sites this along with other Japanese brands like G shock, are being marketed as “ORM” ( original equipment manufacturer) watches.
*OEM
yes oem bro
Can i have the link where you buy that?
Fon'ts wrong on the caseback. The bottom right leg of the Kshould connect higher up on the top right line.
I do watch mods and I found Wish to be a cheapest source of Turtle parts in a form of these fake Seikos.
Do you know if any or most of the cases that they claim are stainless steel are actually that or is it a mix of stainless and cheaper steel, perhaps chromed steel?
How to get it ?
Link?
See this one actually looks solid and has a automatic movement but I bought one off Wish.com and it said in the description and stock images it was a "Automatic" upon receiving it light like one of them fake $15 Rollies and dial said automatic but was a ticking quartz movement. Great review.
If this is a copy, its a seiko srp789k1 copy. The movement looks genuine, the case looks genuine, the bezel looks genuine but the dial does not. It says nh35, and it should say 4r36 on it. Original Turtles have misaligned chapter rings. I sell seikos as an authorized deeler and it looks very genuine to mee, it looks just used, its possibly an used seiko with a new dial and a scrap movement. The srp789k1 in this video looks like one from 2016 for many reasons to write here now. And this seiko goes for 260-300 dollars, not 400.
@@ericsmith1878 Most of the time when you buy a fake seiko the case is original but used, thats the problem. I once got a seiko for service from a customer, it was fake, the case was corroded from the inside and all beat up. But it was only 2 months old. They destroy the seals and the screw of the caseback. I dont know how. Maybe just buy a cheaper seiko, a lot to choose from.
@Haxomen The clasp for the bracelet looks very different from what i've been able to see online. there is a shroud or a little part that extrudes before the bracelet starts on the 'clasp guard' side. please shed some light on this.
@@shineegtspc Yes the clasp is not original because it doesnt have the divers extension that you are seeing on the online pictures. But the links, endlinks and clasp are looking original, only the diver extension is not there.
@@hamzajas1532 much thanks.
Link please
I picked up one of these from a sale with bad images. It has the exact same serial number as your watch also.
The 4R36 is the Seiko branded movement. The NH36 is the non-Seiko branded movement. Usually will state TMI "Time Module Inc" on the NHXX movements. I wouldn't be surprised if there are now Chinese clones of the NH35/36 movements.
May I ask if the watch came with the seiko manual or prospoex box?
Herman Chu It came with nothing lol. Plastic bag and bubble wrap!
Took my case back off and mine had a 7s36a but it hacks and handwinds. At least it says 7s36a on it lol
Can I pls get link
good to know great content thank you
I was just on the wish app and saw this watch for 57.00.They Retail for like 400.i didn’t know they fake Seikos.Seiko is notorious for horrible QC(ESP the Chapter Rings) so that’s kinda normal.BTW Love the Parnis.I have a Parnis (Stowa) Clone and a Panerai Clone.Owned both over 2 years and they work perfect.I was looking to get the Batman GMT too.Ive mentioned these watches on other UA-cam channels and it brings out the Watch Snobs🤣🤣🤣.IDC,I’d rather spend 75.00 on a Parnis Flieger that 99% of ppl couldn’t tell the difference between that and a 1200.00 Stowa.The dials are both sterile.Great Video👍🏻👍🏻👍🏻
I have this knock off from wish and the date is messed
the most obvious clue is that on the dial it says "NH36" which is a movement Seiko sells as a stand alone to anyone who wants to build a watch. IF you look in the back, it says 4R36. That right way shows the inconsistency. Real Turtles show "4R36" on the their dials. The other most common clue is on the inside of the bracelet, the very first part of it connecting to the case, should have engraved "631". On this fake, as shown, there are no markings. As far as the rotor is concerned, you will find that it's a thin piece of aluminum that has been glued on the original NH36. These people are very clever! lol
I appreciate this level of detail in fakes. Shows they actually care
The movement really is an NH36A, they just put a razor thin 4R36 cover on the rotor wheel, you can peel It off. Sounds mad but these NH36 equipped fakes are much better value than a real one, but If I'm buying a turtle I'd get a Steeldive from Aliexpress.
Dude unless Seiko says so I have a feeling you got the genuine Seiko coke srp789...all issues seem consistent with Seiko quality issues
Ordered 3 different ones to compare
I have a fake Seiko I bought on wish. You can only change the date forward. You can't make it go back a date, and it came a date ahead. Had to go through a whole month to change it. I like it very much though. It looks good on my wrist
That's normal. I don't know any watch movement that allows you to change the date or day backwards.
At least you have an Automatic movement. The moment I took it out the box I noticed the watch ticking. So I'm anticipating it's Battery operated.
Same...
Some models do come on a bracelet
I love the japanese symbols on the day...
The original chapters are off as well. At 5 it's quite bad not so much at 11
Will aftermarket parts fit or mod it?
Yes
For a 70$ watch replica its pretty decent and catch the eye lol
Im curious can we use some parts to a real deal like a skx case?
Like your style man, great content and good entertainer.
Salut from portugal
bruno ferreira Thanks man! That means a lot.
I don’t know about the bezel but I’d venture to say the dial and hands are compatible because it uses the nh3x movement.
@@lennyscheapwatchchannel2099 thanks for replay brother,
Well only dial and hands dont justify the 70$ but if the case have the same measurements of the real deal...that was something.
But is a pretty nice feiko 🤪
bruno ferreira
In one of my other videos I bought an aftermarket bezel to modify my fake skx and in the video I said the bezel didn’t fit. I assumed it was because the case was also fake.
I just tried to put that same bezel on a real skx case and it didn’t fit either! So I’m thinking I just got a bad bezel. It might be compatible, and I’m waiting on another bezel from another manufacturer so we shall see!
bruno ferreira Yes you can use because NH36/4R36 is also a Manual Winding version of 7s26 family.
It's not a replica it's a straight-up fake!!
just paid $38 with promo code and shipping included for this....worth every penny just for the original Seiko movement inside. I am using it as a training tool for removing the crystal etc....
Good Video man, thank's.
I can tell at least three differences from the original:
1. On the fake watch, the top spot on the dial is not carved. You can see the glowing material is over the dial on that spot on the fake one.
2. The original has much more text under 6 o'clock, the fake one it has a brief Japan.... text.
3. The original strap has a diving extension area, wich the fake doesn't.
Regards.
This actually just saved me from a fake wish posing as authentic online
Wow it was from wish ?
Weird. The dial is branded with Seiko and the Prospex logo but uses the NH36 name which is not the name Seiko uses for this movement (Seiko uses the reference 4R36 for this movement). None of this makes any sense.
I cannot say if its fake or real deal
Hey man, thanks for this vid, I canceled my order and waiting for a refund 👍😁👍
Thinking to buy one, but stays with my Hanowa.
Word PADI missing? On this one.
I bought the same and i ordered padi versión. I bought cocktail time in White but second hand is not blue . Blue cocktail un wish has White date window but movement in wish fake watche are very fine ones. Turtle bezel works a lot of play. I hace lots of original seikos and this ones are funny.
Plot twist - this one is a genuine one
It seems like a real one!
Fabrizio Dutto Pretty close!!
is real one man
@@skycutter5596 can tell it's fake instantly from the lume pip
Rotable bezel?
Joel Chamba Yup!
The Seiko on the rotor is held on with sticky tape.
The Right movement would be a 4r36, not a NH36
Leesherwood they’re the same movement
@@lennyscheapwatchchannel2099 4r36 is usually put in Seiko if made by Seiko and nh36 who's is exactly same is usually sold to other venders who want to use this movement ,they both were either made in Japan or Malaysia and stamped on it and if no stamped it's a copy made in China
Mars1313 That’s... yeah that’s pretty much what their business model for their movements lol
..4r36, nh36.. ..tomayto, tomahto..
I wanted to know what that brings a false seiko to buy ..... so what shit ..
Could it be possible that they are the real thing, but they did not pass the QC instead of throwing them away they get boxed and sold to a third party who sells them on wish?
That would be awesome....but no,this watch cames with the original 4r36 movement,and if you want to replace something on it the oen parts dont fit,for example the bezel dont have the same spring than the original and its flimsy,i assume that it dont have iso 200meters too.. ...for all and all its cheap nice replica with a good movement
so you saw 2 srps in your life and you can recognise fake?
Did you maybe consider it's real lol ive seen other you tube videos on this exact watch they are nothing like that one
I thought it was real but I don’t know what I’m looking for.
Wow so cool i thought it was real but it turns out it was fake i wish i that can of cool 😯
Can you do a water/swimming test on the fake one and see how does it stand? I would rather torture a fake one to water activities than the original one lol. So, can you test that and tell?
Saturday is blue on the original ;)
Hi is the case stainless steel? Thanks
Dan Loftus As far as I can tell, yes
@@lennyscheapwatchchannel2099 and it has a screw down crown? Cool
Dan Loftus Scree down crown!
It would have been nice if you would have worn us turn down the volume I jumped out of my seat when the music came on! Nice video.
Not able to differentiate for people who do not have the real stuff.
It will be easier for viewers to understand better when compared the differences between real and fake.
have link for this watch ?
On the wish app..Seiko Water Ghost $51.29
@@echochambers8418 thank you
I've just ordered one for 7 pounds off Wish :)
This model comes with a steel bracelet, may be with a rubber strap too. My turtle , bougt from a official dealer , was on a steel bracelet.The shown fakeseiko do have very thin spring bars, the original does have the fat ones. What kind of people are buying fake seikos? There must be a lot of the them out there, otherwise scamers would not fake seikos.
"It looks like the right movement to be honest with you... I don't know..."
I got me one of the wish for $57 and i am shure it is fake everything lines up nicely. On my arnie not a single thing lines up that is how i know it's original😉.
There are dozens of these on eBay, look for the dial text, it has NH35/36 on it. I've reported dozens of them to eBay and they do nothing.
They should have a 4R36.
TooOld ForTwoWheels That text would be on the real one too lol
@@lennyscheapwatchchannel2099 The real one doesn't say NH36 it days 4R36.
eBay is full of fakes that say NH. NH is the movement Seiko makes for third parties, precisely the same as a 4R just unbranded. I have two legit turtles they both say 4R36. If anybody has any doubts about legitimacy of a Turtle on eBay ask the seller for a dial close up, doesn't mean it's real but all the fakes I've seen have the wrong dial text.
TooOld ForTwoWheels You’re right! I was wrong, my bad.
@@lennyscheapwatchchannel2099 No worries dude, I just wanted to make sure people know what they're getting 👍🏻 some of those fakes are very good and I have had half a dozen watches with NH35 and 36s they're great value movements.
@casiotechI Yeah, I've had four turtles now and all original but the bezel insert is always an easy tell as well. Same with SKX. Might not means it's a fake as such, just not original.
the only way i would be able to recognize the "fake" one would be from the nh36 writing...
U could use as a beater watch..only because u paid for it..wouldn't go swimming though
could it be possible that these are actually real seiko's that did not get passing grades during QC? i just can't make sense of any fake watch making enterprise buying a genuine movement and sticking them into fake cases.. it jut doesn't add up to good cents....
Soooooo, you got a fake Seiko that was almost the exact same as a real one??
@@Necrocancerr 🤣
Maybe just a reject, that made its way into the hands of an unscrupulous employee. Looks too close to a genuine one to be an out and out fake to me.
Royston Marshall Nah it’s legitimately a fake. Modern technology is amazing.
The lume pip is the dead giveaway. Every fake Seiko has the same pip. Genuine Seikos have a Pip that’s recessed down into the bezel.
@@skipast75 well, I don't know how many watch enthusiasts can you bump into on a everyday level. Nobody will bloody have a single idea if it's a fake or not
TPD Gaming I love replicas. I can actually wear them and not spend the day worried about scratching up or losing them. I really wish someone would make a 1:1 Grand Seiko. Wish is packed with 100s of knock off Seikos . Half are junk. The other half are really well done. There is 1 Grand Seiko on Wish. The logo is really well executed but the rest of the watch is rubbish.
@@skipast75 do you have personal xp with some od the good ones. I am looking for one and I can't tell which one is the best deal and which one is not a bust/screw-over
Thats how you know companies rip off their customers
Luis Serrano Right?!
Real seiko
Hector Orozco Nah man it’s fake.
How much is it?
Ylem 500 you can get them for around $70 on the Wish App
@@lennyscheapwatchchannel2099 yeah i already saw them there. But there are also seiko turtle's for 50$. Are they the same as the 70$ seikos?
Ylem 500 lol how would I know? This is the only one I’ve bought, but I would assume they’re all the same
@@lennyscheapwatchchannel2099 i ordered it and it is a quartz watch...i'm disappointed
Ylem 500 whaaaat really?? That sucks man. Does it look good though??
i'll buy this for mods... not going to dive anyway
Seiko parts are made in China unless it's very high end ,watch movement are assembled in Malaysia ,it's very easy to clone a Seiko and so are the Swiss made watches too , almost 40 percent of their parts are made 8n china
More than 40% is made in china for most Swiss under $3000..many are entirely made of China parts (Crystal, dial,case, bracelet, hand) besides movement but technically counts as Swiss as long as value added ends up 40% which included r&d, prototyping, and final.assembly and inspection..very rare to fiind 100%Swiss under 10k and even those are entirely machine made with min..hand finish
.
its not bad m8 on the wrist no one going to know
The parts alone are OK. I may just buy one for the parts alone.
I was gonna build an skx and was thinking of using one of these as the base. If I'm replacing the bezel, crown, dial, hands, crystal and strap anyway I don't wanna drop $300 on the base watch.
@@elliotthope1 apparently skx bezels don't fit the case though. But don't quote me on that.
@@elliotthope1 after all we buy after market parts anyway.
ITS a Selfmade Watch for Kids 🥳⁉️
I actually dont have a problem with it. Its not a high end rolex or anything its a Seiko. The movement looks good. I think only an idiot would think he can get a 400 watch on a wholesale chinese app for 70 dollars...from China. I bought one but I don't expect it to last more than 2 or so years. Ill get something different or maybe a real one at that time if my pocket decides to play nice.
Well if it has a Seiko movement it should last you ages as long as you don’t actually dive with it haha
@@lennyscheapwatchchannel2099 to me that's the most important part. If it's not an automatic movement I won't keep it. It should arrive in a month or so. Just ordered it. Thanks for the review mate. Good job.
@@JamaicanMeCrazy sooo?
@@edobaldoni got it. Love it
I don't worry about bezel tension. No one uses it anyway. It's just decoration.
Where can you buy these? Wish seems useless because you cannot even ask questions from seller to find out what kind of fakes they are selling :-) Many of them are so poor that they may even have a quartz movement.
4R36 is the movement in a real turtle 🐢
It's the same movement, one is branded one is not.
A cheap watch and a fake makes a person lose all his credibility.
Agreed!
Who makes a copy of a watch that costs £350 new and boxed by using parts that cost £150 minimum. Surely not worth yhe effort. Making a personal mod yeh but a copy for profit I doubt. I've got a nemo that I paid £250 last week but it's got the 3 colour hands Japan movement non Ltd back and what looks like a copy dial. Oh and a white box not the black orange one. Even the stamped back cost over £100 and thats not Ltd edition. These are just mods not copies
Something like this would only be worth it if they have a very cheap but high quantity wholesale deal on the cases, movements, and other parts. It's easy to get all of these wholesale in large numbers yourself actually, and if you could find some REALLY cheap labor to slap it all together (which I suspect they do in China) then you could make some money. Especially something that's sought after like some of these Seikos. Apparently worth it to someone- not me for sure haha
I would had been happy with that. I bought the same one from Wish but it came with quartz movement even though it said on the listing that it comes with 4r36 . Dodgy bastards!
Can't you contact their support about it?
gmaildotcom I did. The seller that sold it to me was gone. Wish was kind enough to refund me the money. Worked out well in the end.
First one I ordered was also quartz despite the ad stating "automatic". I was refunded on that one. And actually, it keeps good time. I use it on a Nato strap to knock around at work in.
All of those fake Turtles have same serial number 630711