Maddog 150 Mod #11 (NCY Gold Variator) GY6 115mm with 842 Belt
Вставка
- Опубліковано 29 вер 2023
- GY6 icebear maddog 50 150, chuckus, ruckus
I will test each mod individually. Mod to-do list:
FREE Mods
Air Filter
PAIR delete
842 Belt
Muffler insert
Cat delete
Adjust Valves
Tune Carb
MONEY MODS
NCY CDI
NCY direct coil
28mm smooth bore carb
A9 Cam
Electric Fuel Pump
171 BBK with 28.5mm Head
CVT MODS
Reveno clutch
TFC T10 alum pulleys
Polini maxi 3G clutch
Spring bearing
115mm teflon ncy variator
Final Drive Gear - Авто та транспорт
That was very helpful info I was just dealing with the same issues 👍 thanks😊
What GPS app are you using? Thanks
play.google.com/store/apps/details?id=com.milejko.dragracer
Sorry to bother you but what can are you using?
On that video I am pretty sure I had the Taida T100 cam in there. That is my favorite 150 cam.
Did the 842 belt erase the mark on variator
Don't know yet. LOL. That's gonna be my roller weight adjusting mod video. Had to go to work and didn't have time to look
I'm having trouble with the boss it's not long enough for the belt to ride correctly, I want to go with the 842-20-30 , belt. What can I do about that? 😊
Get a Variator shim kit. They are washers with the same outside and inside measurements as your boss. You can adjust length perfectly.
ncystore.com/ssp-g-variator-boss-shim-24mm-set-gy6-pcx
@@GhettoWrench okay where can I get that from
@@GhettoWrench we don't have a place to go and get bike parts and stuff like that, most of the time I get my stuff from Amazon
@@jod5659 get it from that link I sent above. LOL. NCY store
Okay thank you very much. I will thank you so so much 🙏😊
So did the the belt travel the 115 mm with 14 grams and the 842?
It still does not go all the way to top of the 115mm variator. Maybe like 112mm....?
@@GhettoWrench I would say mine is going like 110 I’m changing my contra spring back to stock and going from 10 grams to 12 hopefully it does the trick.
@Hector_x3 let me know how you like it. I have tried heavier contra springs on a 50 and 150. Hatted them both, but they are cheap and worth a try. Maybe, my setup was wrong for them. Some people love them.
@@GhettoWrench I’m thinking what you said is true since I don’t make the power it’s not letting the built move down on the clutch side.
@@GhettoWrench so I was taking off my contra and I noticed the shoes on the clutch were shiny like almost polished along with the inside of the bell housing
PUTTING NCY ON A MADDOG HAHAHAHA
Normally I go with the cheaper alternatives 🤘🤪