Thank you for this video! I have had the same saw for many years and have put up with a slight misalignment forever. This past week I was making a toddler bed and got frustrated enough to go looking for videos on adjusting it. Your video is concise and my saw and granddaughter are happy (-:
I’ve had the same ryobi miter saw for 15 years , almost identical to this, and never adjusted it. I noticed lately that it seemed off both vertical and at 45s . I used your video to square it up because I have the exact same positive stops and it worked perfectly. Wanted to stop and say thank you for such a well detailed video! It saved me a massive headache
Thank you so much for this video. I just set up a WEN saw today and the instructions for checking things were hot garbage. This video has taken a boatload of stress out of the process.
I was really surprised how much cutting power (and torque) this saw had out of the box. I've used other (10" saws) previously and was pretty surprised with the speed and cutting ability of this Dewalt saw.I have bolted mine to a table to minimize movement which I highly recommend.This is a Great saw ua-cam.com/users/postUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe with a light to see your cutting line (not a laser line).I'd recommend this saw fro anyone looking to upgrade from a 10" miter saw.
Watch as the blade the slows down after making a cut. If it wobbles, it may be bent. Also, if you take the blade off and lay it on a flat surface and it doesn't lay flat, then that's an indication it's bent. I wouldn't use it if it's bent. Other indications to get a new blade would be if it's missing teeth or if the cuts aren't as clean and smooth as they used to be. Some blades can be resharpened, but I have done this so I wouldn't know were to go.
My Dewalt 12" miter saw does not cut completely to the back of the fence. The saw always leaves a tiny piece of wood that does not get contact from the cutting blade. How do I correct this? 👍🏽🤠 06/28/24
I have a compound miter saw and when I cut it cut at a slight angel on the back side and I have tried to square it up with no success what am I doing wrong
The crocodile made me giggle, thanks for an easy hide to sort out my saw
Glad you enjoyed the shop 🐊! Thanks for watching!
Great video! It’s so frustrating to have a tool that doesn’t work properly. I’m so glad that no 🐊 were injured in the making of this video.
haha! Thank you, I am hoping that these videos can even do a little something good ;-). Thanks for watching!
Thank you for this video! I have had the same saw for many years and have put up with a slight misalignment forever. This past week I was making a toddler bed and got frustrated enough to go looking for videos on adjusting it. Your video is concise and my saw and granddaughter are happy (-:
I am so glad it was helpful! Can't think of anything better than making your granddaughter happy!
Same here. I was looking into buying a new saw. It was like this when I first had it.
I’ve had the same ryobi miter saw for 15 years , almost identical to this, and never adjusted it. I noticed lately that it seemed off both vertical and at 45s . I used your video to square it up because I have the exact same positive stops and it worked perfectly. Wanted to stop and say thank you for such a well detailed video! It saved me a massive headache
I am glad it was helpful!
this is exactly what i needed to fix my saw. And the way you explain it is pure gold as far as I am concerned...thank you!!! You got my subscription
I am so glad the video was helpful! I appreciate the nice compliment!
thanks for taking the time to do this it was very well done. and I'm glad I'm not the only one who has problems with reptiles on my saw
:-) Thanks for the very nice compliment.
Great video, thanks. Just went outside and adjusted my brand new Ryobi sliding compound mitre saw. Now I feel better! 😂
Great to hear it was useful. Happy woodworking!
Thank you so much for this video. I just set up a WEN saw today and the instructions for checking things were hot garbage. This video has taken a boatload of stress out of the process.
I am glad it was helpful!
What a great video! Calm voice and great useful information! Thanks for sharing!! And I hope the 🐊 is well!!
Thank you, yes he is doing well. haha
This video was super helpful! thank you very much, this is going to help with my shops miter saw a ton! Great video and great safety!
I am glad the video was helpful. Thanks for watching!
Another well made and instructive video. You rock!
Thanks again!
Very very helpful. Thanks so much for the clear explanation and demonstration.
I am so glad it was helpful. Thanks for watching!
I was really surprised how much cutting power (and torque) this saw had out of the box. I've used other (10" saws) previously and was pretty surprised with the speed and cutting ability of this Dewalt saw.I have bolted mine to a table to minimize movement which I highly recommend.This is a Great saw ua-cam.com/users/postUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe with a light to see your cutting line (not a laser line).I'd recommend this saw fro anyone looking to upgrade from a 10" miter saw.
Yes, miter saws are great DIY tools.
Very well explained. Thanks! Subscribed.
Thank you. I am glad you found it useful!
Ahhhhhh ... I need to do this. I've been getting crappy cuts. I thought it's because I got a cheap saw.
Good stuff! Thanks so much! Gonna work on
mine tomorrow.
I am glad it was helpful. I hope your tune up turned out well!
Thanks.
You're welcome
Appreciate you. Thank you.
Thank you for this info! Is there a way to tell if my blade is bent? Or what are some indications that it's time for a new one? Thanks in advance!
Watch as the blade the slows down after making a cut. If it wobbles, it may be bent. Also, if you take the blade off and lay it on a flat surface and it doesn't lay flat, then that's an indication it's bent. I wouldn't use it if it's bent. Other indications to get a new blade would be if it's missing teeth or if the cuts aren't as clean and smooth as they used to be. Some blades can be resharpened, but I have done this so I wouldn't know were to go.
My Dewalt 12" miter saw does not cut completely to the back of the fence. The saw always leaves a tiny piece of wood that does not get contact from the cutting blade. How do I correct this? 👍🏽🤠 06/28/24
Is there a way to move the fence forward a little?
my saw is off on angle and the fence is bowed. Harbor freight.....
That stinks!
Hi there,
What is the tool called I need to check? Many thanks :)
Compound miter saw.
Kinda sucks you need 3 different squares to adjust the saw. Now I gotta figure out where that old framing square I've had forever is😅😅😅
😄👍
What is this “Buy a thanks” nonsense with different “tip” options 😂🤣
Make me a fkn Sandwich and I’ll leave you a Tip
🥪 Thanks for the tip! 😄
I have a compound miter saw and when I cut it cut at a slight angel on the back side and I have tried to square it up with no success what am I doing wrong
Hard to say without actually seeing the saw in person. Do you have an experienced wood worker friend that could help out?