Fix your dead Sennheiser Momentum 3 with simple setup
Вставка
- Опубліковано 28 вер 2024
- Fix your dead Sennheiser Momentum 3 with a simple setup
the problem is caused by the low voltage of the integrated battery, what you will need to do is to charge the battery directly to a sufficient voltage so the charging case can awaken it! easy!
I will never purchase another Sennheiser, i have no time for this, wasted my money
Same for me. I'm completely annoyed for wasting this much Money Just for the earbuds to not working within a year
Exactly my thoughts. I got a replacement and now that's broken too. If I get another replacement I'm immediately selling it.
Same for me. I bought it because of highly recommended devices from UA-camrs but this product is a no no. Don’t buy it.
I Couldn't agree more. I will never buy their products again after the grief ive had with these and customer support.
Same here. While I like the sound everything else is horrible right down to the app.
So stupid for Sennheiser not to identify this problem in thr dev phase. What is their qualification and & hardware teams doing ?
they are too busy hiring stupid useless people
Thank you so much!! 2 pair (3 earbuds) repaired yesterday based on your video... I had a pair, than one of the earbuds went off, so I got another pair. Yesterday I noticed that the new right side stopped working also, so I googled it and found your video. When I got home, I thought I'd try the method on the old one, but by then both old earbuds were off. So now I have both pair repaired :) Sennheiser should warn all customers with big red letters not to let the buds run down...
thank you so much!!! gonna do this tomorrow!! those sennheiser "consumer support" should have this video on the play always during their daily meeting
The consumer support should think of a fix. I mean is this even acceptable for a flagship product?!
Amazing! It does works.
But one thing to mention you don’t need to separate the main part. Just took the cover off then you can jump charge from there.
Great tips! Thank you!
I second this. It was a bit figity getting it back together.
@@Ripzalot yeah same here. After i fix the right bud i realized i don’t have to do it for the left
So, it's no need to disconnect anything? Just open the buds, look out the charging pins and cable to the case?
@@pedropabloleoncarrillo9343 yes
I had this very issue and followed the video. Worked like a charm. Momentum 3's working again like there was never an issue.
I am glad that my video helped!
It worked for me and now my earbuds are working again!!! Thank you very much for this!!! The earbud batteries are not charging up to 100%, they remain around 80% to 70%, but I guess this is another problem. Such a shame that this phones got this huge problem! I enjoy their sound, but this unreliability made me switch to Airpods Pro 2.
Thanks to your video I solved it, the right earphone was no longer charging, unlike the video I improvised with a cable to charge the Xiaomi smartband, the contacts matched those of the earphone battery so I tried, the first test failed by heating the battery but it continued not to charge and work. On the second attempt I noticed some small shocks and I feared I had reversed the polarity so I tried again by reversing the side and after this attempt the earphone started charging correctly again, thank you very much, you were a great help 😉🙏👏💪❤
Great video, i love the fact that you are explaining what's happening, not only showing what you do. My question is : did you have to re glue the case back somehow for it to hold together when putting it in/out of the ear?
Guys this really helps! Just be very careful and do what it says. Then plug the case and put the buds in it and wait. Also, Uninstal sennheiser app on your mobile or whatever and connect the buds! I tried everything and it helped. btw my first song when i got back the buds was Oasis - champagne supernova ❤😂
This works! Very clear and easy with a cheap multimeter. Many thanks!
Maaan, you are awesome ❤ you saved me a lot of money! Reddit's branch needs heroes like you!
I wake the device after 2-3 days its again happen. I did factory reset as well any reccomendations appreciated.
Thanks a lot! I tried it earlier and now it is working perfectly!
Exellent, thank you. I have TWS 3, but another problem.
Thanks, I did it also and it works well to recover the battery but unfortunately I have no more sound on this earbud and I don't understand why...I tried the reset to factory but it doesn't change anything !!😩 Can you help me ?
This worked for me. 9v battery and alligator clips after taking it apart. Quite the design flaw, having to jump start an earbud.
Hello, any help here. Right one woke up with 2.7V but Left one still at 3.10 V and doesnt up or down voltage but doesnt wake up as well... Thanks in advance.
I wish there was a version with home tools, i saw something with batteries. Not sure if it works
I want to thank you, you helped me with repairing my buds :3
Thanks so much, great video. Fixed my right earbud!
Yeah!!!! It works for me.
Thank you very much!!!
What a piece of ...t these earbuds. I love the sound but such design flaw is unacceptable
Exactly my thought, very poor SW & HW testing
Worked like a charm. Thank you brother.
You need all that extra equipment though. What is that other stuff? Can I buy on Amazon?
Thank you so much, it has worked!!
Where can you buy the devices go check voltage and jump start the battery. I just see people fixing it but i dont have the tools.
Fantastic! Thank you for making this
Worked Perfectly Thanks!!!
Honestly for how much these things cost I'm getting 2 many problems with them, and I shouldn't have to do all of this to fix something so basic
Any advice on Sennheiser Momentum TW2 wireless headphone, left ear bud only works when in an elevator or on a plane, or if my phone is 5cm away from it, some sort of interference issue? Any help would be amazing
Fix my problem earphones thanks very much.
I tried charging it for a while but the voltages won't increase?
Video title needs clarification. I have problems with a Momentum 3 headset.
I hope you see my comment. This worked for my R earbud, but it lost touche control and now I can't pair my headphones. Please help 🙏
THIS ISSUE IS RECURRING
YOU HAVE TO DO THIS REPAIR EVERY TIME
I HAVE TW2 & TW3-SAME PROBLEM-- NOT RELIABLE PRODUCT-- GARBAGE!!!
Sennheiser better than Sony .
never
I've been through 4 of those Sennheiser mtw3 earbuds & they all had a earbud that died on me like months after having them. It was a fatal flaw in the mtw3 models. It's a shame
It didnt work for my left earbud…the battery charge is at 0.2 volt which probably means its broken, cannot jumpstart it anymore. If I try with the method you demonstrate here, then the box goes blinking red after 2 secs which means short circuit or battery broken.
I would also advise against removing the battery completely like demonstrated here, just remove the cover only and maybe the little connector and try it that way. Other people here commented the same.
Replaced 5 pairs on warranty for this problem. Just got the M4.I hope the problem was solved with this one.
Amazing, mine is working perfectly now, tanks alot!
P.S.: I didn't even need to remove the last part of the earbud, just opened it once
Wish you made this video sooner. I warranty exchanged my MTW3 four times within a year, and on the last time, I wrote a long letter to Sennheiser saying I gave up on these buds. I asked nicely to exchange them for the Momentum 4 headphones and surprisingly they agreed. I'm considering getting the MTW4 as apparently, they fixed the battery issue.
They said the same thing about the True Wireless 3, yet here we are looking for a way to fix their defective product.
Tried this several times but just not working for me. The buds just not taking any charge at all. Its my second pair so theyre going straight in the bin.
Is it possible to reset the voltage using croco wires on the case and pin the output directly to the both embedded pins without opening the bud ? Just to force the voltage to be up again ? I would like to avoid to open the bud
Thanks!
I fixed my MTW 3. My problem was finding a power source. I had one staring at me right in the face. An old battery for a UPS backup case. It had 8 volts on it. I used it to charge my right earbud which stopped working a few days ago. I jump charged it for about 2 minutes. Reassembled it, and put it back in the case.
Started charging immediately. After 5 minutes I wanted to check to see if any lights were blinking. The red light was blinking. That was the 1st sign of life. Put it back in the charger and charged it some more. Decided to pair both buds up and test for sound. Paired up with no problem. Connected it to the Smart Control app. Smart Control app showed only 20% charge for the bud I fixed. Before I had only 10% charge, so Im making progress. BTW on the sound test, the buds sounded great, like they were new.
Thanks so much for this video. Too bad I didnt try this sooner. Yesterday I ordered a pair of MTW 4 on Amazon.
Thank you very much. For me the left side earbud is dead. Annoying issue for Sennheiser.
Appreciated it for this teaching video
🌷🌷🌷🌷
Works perfectly
Stupid Sennheiser
This is worked for me too! However I need to do same thing once a week, it happens again.
This fixed mine, thank you very much for posting I would have never thought of doing this 🤝
After fix do you have any issue arise again ? about voltage is again low ?
@@GauravSharma-x9u Sadly yes... it could charge normally for a few weeks but the same issue came up again. The battery in the right earbud is just cooked and depletes on its own even in the case. I ended up sending them back on warranty to get them replaced and they're sending the newer MTW4 which apparently doesn't have this battery issue.
@@ChunderThunder1 Mine warranty is over in july . I barely used 5-6 times in 2 years.
what are the cables called and where do I buy them?
alligator clip wires, amazon has them, any electronics store would have them as well
@JINZZEWANG-nz8bc help me. The moment I connect the cable to the earphone, the case start blinking red. I have tried changing the - / +, just in case I got it wrong, but still the same. Do you know why? Pleaseee
This happened to me as well, first, make sure there is voltage coming out from the two little pins. you can reset the case by closing it and connecting it to a charging cable. let me know if it works
@@JINZEWANG-nz8bc yeah. I think there is no other way. I have to reset the case everytime, only then the voltage on earphone will go up. Now my earphone is working again. Thanks a lot!
So if the battery ever gets too low will this happen again? Is there a replacement battery that isn’t prone to this issue ?
@@C0rvidiom_ Sadly yes, if you can find the same battery model you can always replace them