Just finished putting flat base on my kitchen cabinet last night. Easily see my hand mark after I screw them back to the frame. Now this gives me an idea. Thanks!
fantastic video I've been weeks on UA-cam trying to decide on what paint to use on a kitchen and you have helped me a lot with this explanatory video thanks.
How do you make your toner? I'd really appreciate a complete rundown on the the products you use and ratios. I wish you, your family and friends a very merry Christmas and a Happy New Year. Take care .
Very nice, a word of advice, buy yourself a box of aluminum foil, and place a small piece on the can you your are going to use, so you don't make a mess on the edge (rim) of the can, Granda gave that advice, since then I always use the aluminum foil on the can rim, specially on enamels , urethanes (or no water base ones), it a lot less clean up to do, I don not use solvent base products that much, and when I do, I use the Poly mineral spirits trick and do it by hand, maybe just maybe I will try spraying it, you did a beautiful job, thank you very much I'll keep in touch, gracias
Hello friend Good job I am working on painting a cabinet Could you give me the color of the stai. and the polyurethane you are using What kind of polyurethane is it. Thank you.
Lookin good man! Love the finish of that 2K Poly. Those Tekna Prolite guns are awesome! I have one and do automotive painting as a hobby. Can you do a vid about toners and maybe going into more detail about them? Im gonna takle redoing my parents kitchen cabinets. It was a custom kitchen, and is about 30 years old...Its oak. I want to refinish but tone them just enough to take away the orange or yellow hue that they have. They dont want dark, so i will have to be very light with the toning process...but im not sure how to mix it up, or what even to use... Thanks for any help you could provide!! Also, where would i purchase a 2K poly?
Great video! With "painted" cabinets being so prevalent today, I'd love to see your approach to this using Ilva's 2K poly from start to finish. Specific products used, techniques, etc. It would be really interesting to see!
Thanks for that link, @@finefinishsupply! Another excellent video and definitely helps me see how these products can be used. Looking forward to the solid white video!
Do you have more in-depth bigger videos? What do you use for a toner? . What brands do you use? If you could do a video on just mixing the 2K poly. I’ll look through your video. Do you have a specific pre-cat lacquer? Can you use a vinyl finish on everything? Would you use a 3k poly on a table top and a pre cat on a base? I have 100 questions lol I think you said the brand but I missed it. I noticed you aren’t wearing gloves and touched it with your hand, is it not terribly effected by oils on the skin?
Hey brother.. After applying the sealer as a toner with its color.. I top coat it with 2k poly… What could I use to match the sample since my toner was a sealer.. and I’m topcoating with 2k Could I dilute the sealer with acetone so it won’t crack the 2k . To use it as my toner
you said 2 to 1 that means 2 ..(2k poly) with 1. what is 1. i do not get it. pls help me because i need to spray my cabinet in my school bus conversion to RV. or can u tell how to mix it. what did you put it. pls names it
You dried sample does look better, but this low sheen does hide that wet orange peel look before. I’m wondering if a full gloss dried might reveal the orange peel, especially from my previous comment is what might cause it. .
I have white cabinets that were finished on site with SW semi gloss paint. The hood above the range is beginning to yellow. Nothing has worked to clean this hue off. Do you think I could use your method to restore my cabinet color? Would I have to sand down the white color and repaint?
Bad news is it's most likely that cheap precatalyzed lacquer favored by all the let's get it done quickly..... your whole kitchen will turn yellow overtime..... you need a Conversion varnish or a 2K poly. Multiple times better.....!!
I'm looking at upgrading my spray system. I'm mostly spraying tinted lacquer and might transition into a waterborne product like renner. I'm weighing the difference between an Apollo hvlp and an air assisted airless. What are ur thoughts?
It depends on your production rate and finishing environment. Please give us a call and we can discuss in greater detail Www.jassosales.com 346.345.8951
Hey man ima furniture finisher. And we spray polyurethane products mostly and polyester for primer. I sand and block back any item 180 for priming if it’s MDF/timber and then apply 2 wet costs of polyester. Then you can sand that up to 600 and apply you’re normal COB
why would you use any other product other than 2k poly? It covers everything. You can get it in any sheen and its tough as nails and then some compared to any other clear coat. AND OH SO EASY to touch up.
In a painting versus staining application; have you had much success in grain filling oak, either with an additional product sold as a grain filler (such as: AquaCoat, Timbermate, high strength spackle) versus vinyl sealer? I'm curious about pros and cons of other methods versus just trying to fill a cavern with sealer. Thanks.
@@finefinishsupply IF , you don't need to wipe dust off the surface because "you're in a hurry" , and yet the door looks awesome .... WHY EVER WIPE AGAIN !!!!!!!!!!!!! lol .... I was shocked to see you sand and then tone right after without "dusting off" first , yet the damn door came out freaking gorgeous ..... Throwing all my rags away now .... From now on I'm going to pretend "I'm in a hurry" !!!!
Louis, thanks for the posts. Question: What does toner do for me? If I stain/dye, aside from using it to fix variations piece--piece (as you demonstrated using the spray can), what is its affect?
When you cross spray the 2k on the last coat your still spraying 2 coats essentially. Even if you jump right into the cross spray immediately That first coat is drying fast enough that now re applying the second coat they may not flow as it could. You still show an orange peel under those lights. I,ve done this cause the underlying coat sucks the solvents needed to flow the coat out. Might have you done better not to spray 2 coats ? Maybe just slow down for one heavy coat ? I’m using turbine air at lower pressure and it doesn’t have so much air as you do. What do you think ?
Why not use 2k poly on furniture? It seems to have great qualities of durability that make me want to use it on furniture. Also, what's the out gassing time frame of pre-cat vs CV vs 2k poly? At least in relative, spray to installed in a home time frames? I know it can change due to all kinds of factors (temp, amount of thinning, etc).
You definitely can! I enjoy the soft amber of lacquer on furniture. Poly is a plastic so it can give the furniture an almost plastic appearance. It is very high solids so it's not my preference for furniture.
Dang it man. I don't mean to bust your chops but you might think about all that waste. You're wasting more paint than your connecting with the door itself. Flip your wrist sooner. You're hurting my feelings. lol
Just finished putting flat base on my kitchen cabinet last night. Easily see my hand mark after I screw them back to the frame. Now this gives me an idea. Thanks!
fantastic video I've been weeks on UA-cam trying to decide on what paint to use on a kitchen and you have helped me a lot with this explanatory video thanks.
Thanks for the video. I had a customer asking about the Ilva I sell and you helped me show him the exact same product and how to apply it.
Beautiful work. I'm always taking notes when watching your videos.
perfect work and result, I would like to know the materials you used please thank you
How do you make your toner? I'd really appreciate a complete rundown on the the products you use and ratios.
I wish you, your family and friends a very merry Christmas and a Happy New Year. Take care .
Would also like to see exact products and ratios please!
Very nice, a word of advice, buy yourself a box of aluminum foil, and place a small piece on the can you your are going to use, so you don't make a mess on the edge (rim) of the can, Granda gave that advice, since then I always use the aluminum foil on the can rim, specially on enamels , urethanes (or no water base ones), it a lot less clean up to do, I don not use solvent base products that much, and when I do, I use the Poly mineral spirits trick and do it by hand, maybe just maybe I will try spraying it, you did a beautiful job, thank you very much I'll keep in touch, gracias
Looks great. Thanks for sharing!
Awesome video
thanks for sharing your talent Louis
My pleasure!
Beautiful finish
Doing good work. Thanks! For the info. Please upload more videos
foreman4900 thank you!
Great video. Like to see the Ilva 2k wb poly video.
Hey Sgt.
I need info on that Ilva 2k I spray 50 gallons a week of that stuff... I’m doing research on it...
I read that its real bad for you..
why didnt you clean after sanding before putting the spray can on
What size tip do you use ??
Hello friend Good job I am working on painting a cabinet Could you give me the color of the stai. and the polyurethane you are using What kind of polyurethane is it. Thank you.
Lookin good man!
Love the finish of that 2K Poly.
Those Tekna Prolite guns are awesome! I have one and do automotive painting as a hobby.
Can you do a vid about toners and maybe going into more detail about them?
Im gonna takle redoing my parents kitchen cabinets. It was a custom kitchen, and is about 30 years old...Its oak. I want to refinish but tone them just enough to take away the orange or yellow hue that they have. They dont want dark, so i will have to be very light with the toning process...but im not sure how to mix it up, or what even to use...
Thanks for any help you could provide!!
Also, where would i purchase a 2K poly?
That’s for the support for my dad
You are really good at all this. What is the pot life of these products?
One year
You can stain right over a clear poly coat? Did I understand this right? Thx
That is wicked! Do you apply 2k poly on the back side of your doors as well??
Great video! With "painted" cabinets being so prevalent today, I'd love to see your approach to this using Ilva's 2K poly from start to finish. Specific products used, techniques, etc. It would be really interesting to see!
ua-cam.com/video/kf8ANk-np0g/v-deo.html
this one is a pigmented 2k with glaze. I will be making a solid white video very soon!
Thanks for that link, @@finefinishsupply! Another excellent video and definitely helps me see how these products can be used. Looking forward to the solid white video!
louis Jasso did the white video ever get produced?
@@finefinishsupply how long does this last? Does it pretty much last forever without any future defects?
the poly is on cherry wood which is different grain structure, the pre cat looks as if its applied to a different type of wood, just my observation
should put 2k poly on half that black oak door to show the difference
Do you have more in-depth bigger videos? What do you use for a toner? . What brands do you use? If you could do a video on just mixing the 2K poly.
I’ll look through your video.
Do you have a specific pre-cat lacquer? Can you use a vinyl finish on everything?
Would you use a 3k poly on a table top and a pre cat on a base? I have 100 questions lol I think you said the brand but I missed it.
I noticed you aren’t wearing gloves and touched it with your hand, is it not terribly effected by oils on the skin?
Would you use 2k for kitchen table?
Hey brother..
After applying the sealer as a toner with its color.. I top coat it with 2k poly…
What could I use to match the sample since my toner was a sealer.. and I’m topcoating with 2k
Could I dilute the sealer with acetone so it won’t crack the 2k .
To use it as my toner
Have you tried the SIVAM PU Products?
you said 2 to 1 that means 2 ..(2k poly) with 1. what is 1. i do not get it. pls help me because i need to spray my cabinet in my school bus conversion to RV. or can u tell how to mix it. what did you put it. pls names it
You dried sample does look better, but this low sheen does hide that wet orange peel look before. I’m wondering if a full gloss dried
might reveal the orange peel, especially from my previous comment is what might cause it. .
I have white cabinets that were finished on site with SW semi gloss paint. The hood above the range is beginning to yellow. Nothing has worked to clean this hue off. Do you think I could use your method to restore my cabinet color? Would I have to sand down the white color and repaint?
Bad news is it's most likely that cheap precatalyzed lacquer favored by all the let's get it done quickly..... your whole kitchen will turn yellow overtime..... you need a Conversion varnish or a 2K poly.
Multiple times better.....!!
Did you do a vid with the paint life guy?
Beautiful
What's your favorite paint and stain finish gun ? U don't like conversion
Louis I think you need to make that turntable taller. You are having to bend to check the finish and you are doing your back no favours.
How do you cope with overspray on back of doors?
Is 2k a product name or just what is in the poly
I'm looking at upgrading my spray system. I'm mostly spraying tinted lacquer and might transition into a waterborne product like renner. I'm weighing the difference between an Apollo hvlp and an air assisted airless. What are ur thoughts?
It depends on your production rate and finishing environment. Please give us a call and we can discuss in greater detail
Www.jassosales.com
346.345.8951
Even the rocks cry out.
Ok, what size tip?, what is 2k poly, master???
Can I used 2K car clear coat on furniture? Any specific steps to doing it?
Hey man ima furniture finisher. And we spray polyurethane products mostly and polyester for primer. I sand and block back any item 180 for priming if it’s MDF/timber and then apply 2 wet costs of polyester. Then you can sand that up to 600 and apply you’re normal COB
Is that a yes or no?
MBRO DRIVEN yes, he provided the steps also.
Looks like the 2k poly is on maple not open grained oak like the lacquer. Is that correct?
The lacquer was on Poplar.
why would you use any other product other than 2k poly? It covers everything. You can get it in any sheen and its tough as nails and then some compared to any other clear coat. AND OH SO EASY to touch up.
Viscozity?
In a painting versus staining application; have you had much success in grain filling oak, either with an additional product sold as a grain filler (such as: AquaCoat, Timbermate, high strength spackle) versus vinyl sealer? I'm curious about pros and cons of other methods versus just trying to fill a cavern with sealer. Thanks.
What spray system you use
What are your thoughts on the ilva vinyl finish?
is there isocyanates in 2k hardener which are very toxic if breathed in
After sanding, you don’t wipe the surface?
Typically yes, I was rushing this a LOT
louis Jasso got it...
thanks for the educative vid
@@finefinishsupply IF , you don't need to wipe dust off the surface because "you're in a hurry" , and yet the door looks awesome .... WHY EVER WIPE AGAIN !!!!!!!!!!!!! lol .... I was shocked to see you sand and then tone right after without "dusting off" first , yet the damn door came out freaking gorgeous ..... Throwing all my rags away now .... From now on I'm going to pretend "I'm in a hurry" !!!!
What brand of gun are you using and tip?
Decilbiss techna prolite with 1.5 tip
Thank you
ERICK Valiente By the way he meant to say Devilbiss Techna pro
ERICK Valiente and the guy above me meant to say Devilbiss Tekna ProLite
Louis, thanks for the posts. Question: What does toner do for me? If I stain/dye, aside from using it to fix variations piece--piece (as you demonstrated using the spray can), what is its affect?
Most manufacturers will use a toner to give uniform color appearance where necessary or use it as an added feature of the finishing schedule.
Orange peal??
What is the setting of your cup? I have a trouble cleaning them and your setting seem like a disposal one.
Correct this is the pps system by 3m
make your own with a plastic drink bottle, cut it in the right place and it will seal perfectly or you can glue it in with epoxy
Is this car paint please
Where are you located in Houston
Humble Area
When you cross spray the 2k on the last coat your still spraying 2 coats essentially. Even if you jump right into the cross spray immediately
That first coat is drying fast enough that now re applying the second coat they may not flow as it could. You still show an orange peel under those lights. I,ve done this cause the underlying coat sucks the solvents needed to flow the coat out. Might have you done better not to spray 2 coats ?
Maybe just slow down for one heavy coat ? I’m using turbine air at lower pressure and it doesn’t have so much air as you do.
What do you think ?
He is within the window to apply it that way. You can apply a heavy coat like that wet on wet.
Finally seen a sprayer using a turntable turning the job rather than the myriad of idiots walking around the door filling the room with overspray.
They are the best man. We do production a lot of kitchens and furniture turntables are the best
Don’t need 2K Poly; 1080p Poly is sufficient for me. 😉
720p will suffice on today's tight budget.
What is part number for that product?
sepertude pl800 I believe
louis Jasso I’m looking for a great 2k polyurethane to refinish cabinets and tables... can you help
DEAD LINK🤔
Why not use 2k poly on furniture? It seems to have great qualities of durability that make me want to use it on furniture. Also, what's the out gassing time frame of pre-cat vs CV vs 2k poly? At least in relative, spray to installed in a home time frames? I know it can change due to all kinds of factors (temp, amount of thinning, etc).
You definitely can! I enjoy the soft amber of lacquer on furniture. Poly is a plastic so it can give the furniture an almost plastic appearance. It is very high solids so it's not my preference for furniture.
I see you're using ML Campbell's. That stuff's the best. How do you feel about that woodsong product?
Es de agua o haceite
Creo que esa madre es de agua bro.pero si Compras el PINCHI gallon ahi te va a decir que debes usar para limpiar it equipo de esprayar
Will the 2k fill oak grain
No it will not.
Beautiful work. Thank you for sharing your knowledge. Very very very helpfull. Do you have a contact #
With the material you waste as your flaring out you could’ve done another half box coat on the other door
Dang it man. I don't mean to bust your chops but you might think about all that waste. You're wasting more paint than your connecting with the door itself. Flip your wrist sooner. You're hurting my feelings. lol
Didn't understand a word.
I see you finished product is beautiful but you lost me with your chemistry, I didn’t understand it in school and am to old to learn it now .