How to change Front Springs on AUDI A4 B6 TUTORIAL | AUTODOC

How to change Front Springs / Front Coil Springs / Front Suspension Springs on AUDI A4 B6 TUTORIAL | AUTODOC
Top brands that produce Springs: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
On our website you will find a wide range of auto parts you are interested in: goo.gl/DOFokY
Springs: goo.gl/as7BmS
Springs for AUDI : goo.gl/ZQK4IU
Springs for AUDI A4 B6: goo.gl/UiTdys
AUDI Car parts: goo.gl/eyXflH
Mobile Shop: m.autodoc.co.uk
► How to replace Front wheel bearing on AUDI A4 B6 - • How to change front wh...
► How to replace fuel filter on AUDI A4 B6 - • How to change fuel fil...
► How to replace motor oil and oil filter on AUDI A4 B6 - • How to change Engine O...
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
UA-cam: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...

[@johngraham8052]

This video made this job look far simpler than I found it. I used this procedure on a 6 year old seat exeo which has the same suspension and despite using plenty of WD40, an impact wrench and eventually a plumbers blowtorch the head came off the pichbolt (when half out but still stuck). I would advise anyone considering this job to pre lube the pinch bolts long before attempting this procedure, look up the various techniques to aid in pinch bolt removal (such as washers between the slits to stop pinching and potentially using an air hammer on the other end). There are plenty of horror stories for good reason with pinch bolts on this car. I wish I knew this first as I would likely have got the pinch bolt out first time rather than having to get it drilled out.

[@autodocuk]

Thank you for the feedback! Your opinion and remarks are very important for us. We will take them into consideration for our next tutorial. Best regards, Autodoc.

[@johngraham8052]

autodoc.co.uk Despite my comment, thank you for posting these very informative tutorials. I will definitely considering purchasing from yourselves when I need parts in the future.

[@autodocuk]

Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.

[@alexnagle575]

This video was informative, I used it to remove and replace the suspension assembly. My pinchbolts were immovable, but I was able to drop the strut and access the top by manipulating the whole assembly out, leaving the top control arms in place. Not ideal I suppose, but I didn't have to worry about the pinchbolts.

[@autodocuk]

Thank you for charing with your experience.
Stay tuned with us.
AUTODOC

[@GarthGoldberg]

That pinch bolt on the upper A-arm came out easily. I thought that usually it's seized on these B-6's and Passats and you need a $300 Klann tool to get that bolt out.

[@srxxx1326]

they make it look simple but in reality its not. I've had problems with that bolt in the past

[@autodocuk]

This video is considered to be an informative one. We are trying to show the sequence of repair work, rather than the twisting processes of rusty bolt connections. Best regards, Autodoc.

[@autodocuk]

During the disassembly of many units, use a penetrating lubricant, for instance WD40. This will help you to save some time for demounting. Best regards, Autodoc.

[@scottboswell8784]

Would this be the same for a B8 A4??

[@autodocuk]

Thank you for the feedback! To give you an answer, we need to know more information about your car and its configuration. Stay tuned and follow our latest updates. Best regards, Autodoc.

[@OTTEHOK_Ceporo]

I am wont wiev rear replece!

[@autodocuk]

Thank you for the feedback!Stay tuned and follow our latest updates.Best regards, Autodoc.