How to change front lower arm on AUDI A4 B6 TUTORIAL | AUTODOC

Поділитися
Вставка
  • Опубліковано 25 жов 2016
  • How to change front lower arm on AUDI A4 B6 TUTORIAL | AUTODOC
    Top brands that produce lower arm: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
    📲 Buying via app is always cheaper than on the website!
    ❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
    On our website you will find a wide range of auto parts you are interested in: goo.gl/ukeXe5
    Lower arm: goo.gl/7eUYs4
    Lower arm for AUDI: goo.gl/32jfrK
    Lower arm for AUDI A4 B6: goo.gl/uCtgZE
    AUDI Car parts: goo.gl/2FxMCL
    Mobile Shop: m.autodoc.co.uk
    ► AUDI A4 B6 car repair tutorial - • AUDI A4 B6 car repair ...
    ► How to replace fuel filter on AUDI A4 B6 - • How to change fuel fil...
    ► How to replace motor oil and oil filter on AUDI A4 B6 - • How to change Engine O...
    📢 AutoDoc in social media:
    Facebook: / autodoc.co.uk
    Twitter: / autodoc_berlin
    UA-cam: / autodocuk
    Instagram: / autodoc_autoparts
    #autodoc #autodoctutorial
    Disclaimer:
    This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
    ⚡ AUTODOC CLUB - club.autodoc.co.uk
    Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
    ❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...
  • Авто та транспорт

КОМЕНТАРІ • 28

  • @nothingtoseehere21
    @nothingtoseehere21 3 роки тому +6

    On an A4 convertible at least, If you dont have the luxury of a lift you must safely jack up both sides of the car, otherwise the sway bar will make removal and replacement impossible.
    Turning the steering is important in making enough room to remove the ball joint.

    • @autodocuk
      @autodocuk  3 роки тому

      Thank you for sharing your experience, it will be very useful information for us and our viewers.
      AUTODOC

  • @AlesJezek-xw7po
    @AlesJezek-xw7po 3 місяці тому +1

    Super labombastic fantastic skolastic💘

  • @roganddawn
    @roganddawn 7 років тому +16

    That ball joint was never split using that tool!! I know because a standard tool doesn't open far enough for an A4 or A6. The Bentleys video also skips this part.....why not show us how you really split it?

    • @autodocuk
      @autodocuk  7 років тому

      Thank you for the feedback!This video is considered to be an informative one, and it is approximate. Best regards, Autodoc.

    • @nate8930
      @nate8930 6 років тому +1

      Ever hear of a BFH? Those threads are not needed anyway. I've never used any kind of splitter lol.

    • @Ivan-hx7cc
      @Ivan-hx7cc 6 років тому +4

      Roger Clifford
      you are correct. A splitter doesn't fot any audi for a matter a fact. They show how it didn't fit and then the hammered it lol.

  • @bablokkuksi2519
    @bablokkuksi2519 3 роки тому +1

    Super job ❤️

  • @manfiks
    @manfiks Рік тому

    Dzięki temu filmowi naprawa staje sie prosta Pozdrawiam

    • @autodocuk
      @autodocuk  Рік тому

      Thanks for your positive comment! Stay with us!

  • @mindeto007
    @mindeto007 7 років тому

    where to get that puller from? Can;t get that ball point out... :(

    • @autodocuk
      @autodocuk  7 років тому

      Such puller can be found in the specialized autoshop. Best regards, Autodoc.

  • @andyball2911
    @andyball2911 2 роки тому

    What were the torque settings for re-installation?

    • @autodocuk
      @autodocuk  2 роки тому

      Unfortunately, it is not possible to specify the tightening torque, this information can be found in the technical documentation for the repair of your car.

  • @AccessGranted95
    @AccessGranted95 7 років тому

    How old was the part before the new one was put in?

    • @autodocuk
      @autodocuk  7 років тому +1

      Unfortunately, we cannot provide you with such information. Changing of the car parts is performed judging on the parts deterioration and can be determined only after a complex diagnosis of the vehicle by a certified repair shop. Best regards, Autodoc team.

  • @justinpope9910
    @justinpope9910 7 років тому

    I was told that my 96 A4 needs a right side lower tension strut. What exactly is that? Is that the same as a lower control arm?

    • @autodocuk
      @autodocuk  7 років тому

      Thank you for the feedback! To give you an answer, we need to know more information about your car and its configuration. Stay tuned and follow our latest updates. Best regards, Autodoc.

    • @xdygmnyrdf
      @xdygmnyrdf 5 років тому +1

      car mechanics just love to use smartass complicated terms so they can rip more money from you.

  • @marcodutra6157
    @marcodutra6157 5 років тому

    Please send me all material about Audi A4

    • @autodocuk
      @autodocuk  5 років тому

      Thank you for the feedback! Stay tuned and follow our latest updates. Best regards, Autodoc.

    • @xdygmnyrdf
      @xdygmnyrdf 5 років тому +4

      Marco Dutra , send me all your money first :D

  • @valerijscheller3253
    @valerijscheller3253 4 роки тому

    Gute muter alte muter