ADO A20 A16 A20F eBike Unlock Speed Limit S866
Вставка
- Опубліковано 6 вер 2024
- ▶Follow me on Facebook for daily updates: / techtronic9000
⬇️⬇️⬇️OPEN DESCRIPTION FOR MORE INFO⬇️⬇️⬇️
Quick guide on how to unlock the speed of the ADO A20 equipped withe the S866 LCD display.
ADO bikes & accessories are available from the official shop
bit.ly/Officia...
ADO spare & upgraded parts can be found on the official AliExpress store
bit.ly/Officia...
You can now also join the Official ADO users group
/ adobike01
Finally secret menu works also on G51 (Samebike 20LVXD30 ii). Thanks a lot!
Glad it helped
Mine only goes up to po4
My bike only goes up to PO 4
same, did you find a fix?
Deadass bro saves money on gas and used it everyday without a problem. I sold it when I got my car but wish I didn't.
I got hitway bk2 and dont know what i press or did that my pedal assistant stop working? Know how to turn it off or on?
Maybe it's from a brake sensor, that turns off the motor, otherwise I can't tell as I do not know the display & controller of that bike model.
1:04 Awesome speed score but.... the disadvantage is that your battery runs out at least 40% faster
So i would choose 25klm/h
See that's what I was worried about. That has to be hard on both the battery and motor
Thank you so much!!! I messed with some other settings and I’m worried I might have messed something up. Is there a way to restore factory default settings?? I’m just worried about the number of magnets settings.
There is no default reset, you just need to dial in the correct parameters, for the ADO A20 use this as a reference ua-cam.com/video/hSbDzuEtqrI/v-deo.html
Question, and is there a way to put the speed back to 25 again if I want? Its for BK27. Thanks alot
Will it have problems after Speed unlock? Like over heat of motor and battery
No, it will not have any kind of problems. Your battery range will decrease proportionally with the speed increase so you will observe considerable less range.
Great! It works (50km/h) on my TX 3.0:)
And no airbags
My A20F+ has cruise control which is brilliant, option 17 setting 1…, comes in when you hold the throttle wide open and let go - need only to tap either of your brakes or the throttle to dis-engage cruise!
Yes, cruise control was added to the updated controller that was released after this initial version.
@@TechTronic9000 now I’ve stumbled across another brilliant option…, I accidentally pressed the minus button to long for some reason and the bike started to take off! well actually it’s only to start the bike in forward motion then I operated the twist grip which made for such a smooth move off!
Thanks for the great review …I have a question please…I suppose don’t need to change controller to achieve unlock speed limit don’t need any part of the bike change??.sorry for the bad English..
No you don't, just look at my other videos. The newer ADO bikes come anyway with an updated controller that unlock in another way.
any idea if some P pages not showing, like P05 and P10 to P15 + P19 not showing, when you click the power button its skips those P pages.
how can I get them back?
I have an e bije which speed was limited to 25 i bought this now i can go 50 but if i put the po8 25 it still goes up to 50 kmh but slower how can i set it to 25 kmh max?
Hi, thanks for the video, do you know if this works with the Beast?
This worked on my hitway BK5 😊
Good to know, thanks for your feedback.
Thankyou for the really good review.
Glad it was helpful!
Witam, jak zmienić predkosc biegow w S866? Na przykład 1-10 km 2-15 km 3-20 km 4-30 km 5- pełna prędkość? Jakieś wskazówki proszę?
Great video I have ADO A16 but my throttle does not work from standing still. Is the a way to enable the throttle
You just need to enable zero start, it's in this video.
Can You go 35 kmh on throttle only with Your a16?
I want to do in a Rider classic plus 48V can you explain me how to do it? Thank you so much!
Sorry but I'm not familiar with that model.
Great ! Thanks ! 🙏🏻🙏🏻🙏🏻
You are welcome!
Doesn’t seem to work on the EU version, is it possible to unlock version aswell?
Have you found the way to make it work in the EU version?
@@iltony79 sadly not yet, same happening with you?
@@mynsky yes 😔 if I find any solution I'll tell you
@@iltony79 thank you!
6666 that's the code
Hello and thanks for those videos. Im going to buy the new Ado D30C. Do you know maybe that this also work whit new model?
Check my dedicated D30C videos, the bike is amazing, you just need to buy a separate throttle, it unlock and will do 40km/h!
@@TechTronic9000 thanks, I will check it!
Can you recommend me settings for level 1 to get make longest range? Can you explain in next video?
You can increase the pedal delay for the PAS so you need to get some speed first and the you get assisted, that will save a lot of power and increase the range.
Very good information. Thank you.
Glad it was helpful!
Hi good review I have a beiste 750w with the same lcd but my pas only works with pas1 2 and 3 I get nothing what can I do please.
The display might be the same but controllers can work differently.
Nice vid, does this work on the Hitway BK6?
Sorry I don't know the Hitway BK6 so can't say if it works or not.
Daca ai Myria codul este 6666 si apasa lung pe Power.
Hello I really need to know how to remove the speed limiter on E-Mountainbike MONTIS EM 1726 by FISCHER with bafang display. Can u tell me how or if its possible? The e bike is really fast but its limited at 25-27kmh
Usually newer Bafang motors are very complicated to unlock and require a special programing cable.
Do you know how to turn on the exact numerical battery percentage on the screen of my bike?
You can not. But if you want accuracy use the "VOL" indicator for exact battery voltage.
Hello, i have a tronix bicycle , so ice changed the speed in p08 no change on the actual speed , only 25kmh
The display might be the same but the bike controller is probably different.
@@TechTronic9000 Oh, thanks, so if the controler is different nothing can be done ? The display is exactly the same as in video
Hi, I've tried to increase my speed. I already increased the speed on setting 8 to the maximum, what else do i need to make it go faster? Thanks
Found out I have to do this every time I fire up the bike to take it for a ride. Apparently the new ones have no permanent setting. But that's not a big deal at least I'm not stuck going 10 miles an hour anymore
I try but it’s not working for my bike
Thank you !!!❤
You are so welcome. Don't forget to subscribe! Thanks for watching.
WHAT?? It does 35 miles per hour??? I thought it only did 25? And if I do turn this on will it kill my battery?? Or motor??
km/h not mph, it will not kill anything but it will reduce the range.
One question i have the same e-bike but the mine dosen't have a accelerator
You can buy the accelerator from ADO, but you might have an EU version which doesn't permit unlocking.
When I hold down both the plus and the minus, my screen comes up different than yours. it just shows 4 lines?
It might need a security code to unlock
Mine goes up to 150, I have a PACE F1 max do you know how to unlock the speed limit on it?
Awesome...⭐️⭐️⭐️⭐️⭐️
Thanks 🤗
does it also work on sparta electric bike? thanks
might work if it has the same display.
Hello, how to change gear speeds at S866? For example 1-10km 2-15km 3-20km 4-30km 5- full speed? Any tips please?
You can't.
I have a question, how fast does your battery run faster ?
Depends, but at top speed you will be draining it probably twice as fast.
Hi, how many miles can you do on full electric only (im too lazy to pedal) at 30kmh?
With the A20, probably ~35-40km.
Bonjour s'il vous plaît les touche + et - sont bloqué sur P08 . Est ce qu'il y a une solution ?
Salem
Yadra l9ite la solution ta3 p8
Ana tani fi p8 je n'arrive pas à changer c bloqué
Vive cheb hasni 😉
@@saihadya1310 Salam alikom non khouya walo . Wnta ?
Thank you
I'm glad you liked it! Cheers.
Hellos question are 55km or 5.5km?
Hello does this also works for ADO A20+?
Salve, io ho la bici che ha solo un tasto sul display , sai come si può sbloccare? La mia è una bici OM Bike 500 watt, vorrei sbloccare la velocità, grazie
anyone know how to make a Swift zip bike think it has 18" wheels?
Did u figure out how to increase the speed? I have the same swft Zip bike and was wondering how to do this too. Btw the tires are 20"x4"..
Plz for the bk11
A little late to the party but will this work with all e-bike that use S866 display?
Not with all as some of the settings are depended also to the motor controller, for instance some bikes will not unlock speed over 25km/h, but the overall P settings list is the same.
@@TechTronic9000 Another question, to change the speed from 25 to 35kph, how come it needs to be changed to 100 and not 35kph?
Most all work with hit way bk11 except for adding levels of assist beyond 3levels etc
It dint work on my hitway bk5?
If i make targeted use of thottle
99% throttle and 1% semi assistant in how much period of time will the battery goes dead and have to do make battery retreading?
Are your referring to range or lifespan? The A20 fully unlocked will get ~20-30km range with electric throttle and maximum speed, while in locked mode and assisted you can easy get double that. As for lifespan it depends on how you maintain the battery, charging as often as possible, not over discharging the battery and keeping it to 50-60% charge level when not using the bike for a longer time, could improve the battery life a lot. For instance in one of my older bikes I did 4500km and the tested battery capacity only lost about 6%
@@TechTronic9000 Hello my friend.
When you say fully unlocked u mean 35 klms top speed or 25?
Also i would like to ask you if i return from a big ride with bike which is the lowest recomended percentage in order to charge immediately the battery? 10%? 30?
Also if there is a period that i use the bike almost not at all , in order to not damage the battery from stagmation what do u usually do in this case?
Fully unlocked is 35km/h. The more you discharge the battery the more wear it receives. It's much better to discharge it to 30% than 10%. Also if the battery still has 90% it's good to charge it back to full. When you are not using the bike for a long time just keep the battery at around 50% and before riding fully charged it.
@@TechTronic9000 Thank you for your previous respond.
What about A16? if i ride only throttlle mode with 25km/h how many km min and max can i ride?
hello, I tried following all the steps on my Ado A16 but it wont go above 26km/h, any idea how to fix it?
Probably you have the newer controller, check my other ADO videos where I address the new controller and how to enable throttle and speed unlock.
hi i just noticed when i go to change the speed limit on P0-8 mine has 5 numbers like this 00025, any idea??
It's the same 00025 = 25km/h, 00100 =100km/h thus no speed limit.
I got an idea... Set that thing to 99999 mph and hold on😂
it possible do this with assit pedaat
No, only with the throttle.
Can you reduce pedal delay for the Ado A26 to make it go earlier than 7kmh? I saw you tell someone you can increase, but I want to reduce or is 7 the minimum?
Yes you can, enable zero start, also adjust the assistance delay, you can see all of them here: ua-cam.com/video/hSbDzuEtqrI/v-deo.html
@@TechTronic9000 thank you! Also could you give me an idea for what to look for regarding racks for the Ado A26? To carry things. I’m not very knowledgeable about bikes and maybe you will know.
I seen how to unlock. but how can I activate? here in europe comes disabled throttle i think
Have a look at this video for the newer controller ua-cam.com/video/rL0P9gW5x4U/v-deo.html
I never had to power cycle my s866 to change anything 🤔
Hello I have the same LCD screen but not the same bike I have a lankeleisi x 3000 plus which is supposed to go at 46km / h but I am blocked at 35km / h I try your method but it does not change anything. Can you help me ?
Do you know what controller do you have on the x3000, maybe it's a lower power version.
will removin speed limit damage components?
No, but it will drain the battery a lot more faster.
@@TechTronic9000 ah perfect thanks very much the 25kmh speed limit feels very slow on this bike
hello, I bought a onesport ot15 ebike, it's the same display but I can't remove the speed limit, the same 25km works. Please help me bro 🥺🥺🥺
Sorry but I have no idea about the onesport. It could be a hard locked controller which can not be unlocked.
What does the e 30 symbol mean. Thanks
Usually "E" is an error followed by the code.
If i set the P08 in max 100km.per hour, the display gives also arround 100Km per hour, excualy i think the bike goes 35p/o How can i get the orinail speed on the display ? Thank You !
Check all the settings, you have modified something else, here is a walk through for the full menu: ua-cam.com/video/hSbDzuEtqrI/v-deo.html
Please can you help me I try to adjust my speed but now I have trouble with my electronic device my top speed is now 7 or 9 and and my scooter stop working even I have full battery
If it's an ADO A20 then use my settings from this video: ua-cam.com/video/hSbDzuEtqrI/v-deo.html
silly Question Does this also apply to the European version a16+
Does it have a throttle installed? For the newer version I have another video showing how to unlock the speed limit.
Hi i have hitbike kb 10 eu whitout trottle i followed your vid but it stays on 25km, is it possible to do this on kb10 eu bike.
Where can i find this video @@TechTronic9000
Doesn’t work for bk15
So the A16 and A20 have the same electric motor? 350 unlocked?
Yes
@@TechTronic9000 And both can go 35kmh?
It work with the a20 xe?? Thks
Does it has a throttle installed? The XE has a newer controller so this should work ua-cam.com/video/rL0P9gW5x4U/v-deo.html
Great review and also thanks for this video. I have a question, upto how many km/h can the bike assist? Not full electric but while pedalling
It targets 25km/h but the closer you get to 25km/h the less assistance it gives, sweet spot is around ~ 20km/h
Can EU (XE) modesl also be unlocked?
Only if it has the throttle installed, and the XE uses a newer controller so check this video as a reference on how to unlock it ua-cam.com/video/rL0P9gW5x4U/v-deo.html
Will this work for ado 16. Thanks
Yes it will
Didi not work. Not sure id there is another possible way to unlock.
Maybe you are too fat? What is your weight?
Are you trying in assistant mode or in full electric mode?
It's don't work. 🙁 The maximum speed is 28 km/h without load. With the KT controller I used before it was 40 km/h.
Have ado a16, also only goes 28km/h without load after unlocking as in thr video, do you think getting a new controller will work?
Salve,se qualcuno sa come portare la pedalata assistita (modalita 1)fino a 25 km/h me lo faccia sapere,grazie
La mia è uscita dallo scatolo già così, ma il mio obiettivo è esattamente l'opposto, voglio riportarla a 15 km/h. Ti farò sapere se riesco
We don't see you no more with no other new ebikes.
New bike reviews? Just added 2 new and others are coming.
how do i enable the throttle to work straight out of the box thanks
You probably have the new controller, check this newer video for that one ua-cam.com/video/rL0P9gW5x4U/v-deo.html
@@TechTronic9000 hey i got that workin but can you please answer this my display is showing full battery even though its not and i have it set at 36 volts checked the bagterry with a volt meter and it is dead but display does not change thanks alot apreciate your help
Check voltage settings in the P settings menu.
@@TechTronic9000 i have it at 36v i only got this bike on wednesday and its already cuttin out under load and im not a heavy guy strange
Y have a hit way bike with the same display and nothing happens when I change P08. Is still limited at 25km/h. Could you please help me with and advice? Thanks
Did you find a solution?
@@zarrexx nothing. No one seems to know how to solve it
Check my newer videos with the newer controller, the procedure has changed.
I tried that also, speed remains the same with throttle only
Which model do you have? I have the same problem with hitway bike
Does this work without the throttle? I have the UK version please can you reply before my head explodes 😂
You can disable it from settings.
hey can u please tell me i have my p08 settings set to 35 it was doing 35 but now it only does 34.1 even wen fully charged any reason why this is happening thank u 🤗
Temperature, tire pressure, brakes adjustments, all have a impact overt the top speed.
ESPECIALLY RIDER WEIGHT (BAGGAGE, ELECTRONICS, THAT EXTRA BIG MAC LAST NIGHT, ETC)
My aostirmotor a20 folding ebike goes 40 km 26 MPH but I'm 120 pounds 500 watt motor not bad for 700 bucks$739 on eBay
You might want to double check that with a GPS, the wheels size might not be configured properly.
ADO bikes & accessories are available from the official shop
bit.ly/OfficialStoreADO
ADO spare & upgraded parts can be found on the official AliExpress store
bit.ly/OfficialStoreADO_AliExpress
You can now also join the Official ADO users group
facebook.com/groups/adobike01
When you unlock the speed to 35km is the bike supper fast ???
Is as fast as 35km/h are. It's rather enough for normal usage. Keep in mind that top speed will also drain a lot more battery than normal so range will take a big impact.
@@TechTronic9000 hey when you unlock top speed can it be reverted back to original speed thanks
How to configure the bike and increase the Speed
Exactly as I show in this video.
Does this also work for the A20F?
Yes, it's the same.
Does it work on bk15?
Tried it and the menu is available, and you can change other settings - for some reason it still stays to 25 max even though I've set it higher.
What about air 20?
I have separate videos for that on my channel.
is it safe to do this or will i damage parts??
No, but it will drain the battery a lot more faster.
dimmi perchè il mio nella velocità non cambia nulla graziel mio s866
Forse hai il controller più recente. Controlla i miei altri video in cui spiego anche quel modello.
is it safe to set it at 36? thanks
You can set it to 100 so there is not going to be any limit.
Does it work on the EU version?
It works on some EU versions, check this newer controller video ua-cam.com/video/rL0P9gW5x4U/v-deo.html
@@TechTronic9000 thanks, but it doesn't work, I haven't the throttle, I get in the menu, change the value of the maximum speed but it reaches only 25 km/h
@@iltony79 Higher speed is only available by the use of the throttle.
I have eu version no trotlle des it whork also
No, you need the physical throttle.
Hi, i live in Germany and I have A20 E Bike ADO buying but the electric mopeds not working and I need you help me.
You probably have the new controller model, you can see here how to enable it ua-cam.com/video/rL0P9gW5x4U/v-deo.html
How to change kph to mph
Check my other videos where I go over through all the settings.
P02. Value of 1 is MPH, 2 is KPH
What is error 08? And how i can clear it up?
That is a communication error, check all the cables and plugs.
@TechTronic9000 I've checked all off them they are all okay ! I've just change it's a new display and is showing me this error
Did you find a solution?
@@zarrexx no I’ve sold it like that!
i got a problem ... when the scooter speeds up like to 25 km/h if you put your finger away from throttle for a second or two but try to push the throttle again ...the scooter will jerk bakward like when you pull up on brakes
Check the motor plug and wire.
Hello, this is not possible. I bought 2 months before. It is the EU Version
If you have a new EU version that still has throttle installed then follow this guide ua-cam.com/video/rL0P9gW5x4U/v-deo.html
@@TechTronic9000 thanks a lot. Than I will do this on this way
Did it work for you? I have throttle and it works, but doesn't unlock faster than 25km/h
Its work on elektron m5x
I don't know that model.
please find out if it works in elektron m5x
Its work on all ebikes
Certainly not. It only works for specific bikes with specific controller. This is a generic display that can control some parameters.
Needed Pin password to enter in settings menu
Have you found the pin?
Usually is 6666
This not funktion on Ado A20F
9999
It doesnt work
You probably have the newer version of the controller, use this video as reference: ua-cam.com/video/rL0P9gW5x4U/v-deo.html