I would recommend running a on/off switch to the limiter with some extra cable to handle bars so you can run limiter when you are going slower to give the battery and motor a break or you risk cooking both.
@@ArtemGradinar think it doesn't matter what mode you put it on after disconnect the limiter loop it will go full capacity in all modes so better to just fit a switch and switch on when not doing full speed also not a good idea doing full speed for extended periods without limiter or you will kill it.
I drive the exact same model since 2021, 7300km on it, stock battery (48V 26Ah model, „100km range“, realistic 50-70 km range) and unlocked since day one. I go nearly all the time 30-40 km/h continuous, also steeper (longer) climbs with 20-25 km/h and nothing fried yet except the cheap LED high beams. But i also used thermal compound to improve heat transfer from the controller to the frame as well let the motor cool off a bit when the motor overheat icon lights up the very rare moments in the hottest summer days. I have absolutely no clue how you all think this „unlock“ will harm the scooter in long term. If you have not realized yet, those scooters are normally made to be delivered unlocked from factory (thats why many have a connector instead of a bare wire to cut), it just happens that in many countries they are regulated to either drive anywhere between 20 (23 with tolerances) and 25km/h legally so they are delivered in those countries locked. When we talk about the battery…. you are absolutely right about long term damage, especially with the cheapest 48V 10-12,8Ah models with 1000W (2000W peak) motor, when the manufacturers have not used high drain Li Ion cells you can be pretty sure the battery will degrade „fast“, so probably less than 500 cycles even possible since you can discharge the battery entirely within 20 minutes (25km/h or more slightly uphill) (so 3C continuous)
@@harrison00xXx yeah alot of the cheapo ones have the not so great batteries in and generally won't do well with scooter draining full capacity I know lots of people who have done the speed limiter hack and ended up with a dead scooter. It's better to err on side of causion when giving advice about these too many cheap knockoffs out there. That upgrade of the heat compound is a very good suggestion anything to keep it cool is going to help alot I got a cheap escooto secondhand that I have rebuilt derestricted and so far just standard use not had any major issues apart from getting a bit of play in motorhub but that's unrelated to restrictions. If people want to risk it's ultimately up to them I don't mind finding cheap broken ones I can buy and fix😂
Greetings from America guys. It's 3am here and I am researching a gifted a Hover-1 Alpha 1.0. I must have watched 12 E-Scooter vids, and you guys win. I understood your English perfectly, but the accents made me a new subscriber! The demo was clear and concise. Touch wires, slow. Cut wire, fast. Hear it? Yes. Check the gauge. It's faster! I will do a switch when I mod mine, push for turbo mode!!
Did you do yours yet? I just got the 2.0 but im an adult and don't want to fry the motor with the weight. I assume this scooter is for kids. Do you like your scooter?
I think you two speak very well in English and since I love electronics and making "modifications" myself I find the content humorous and informative! Gut Gemacht!
i'm from belguim and as long as i can learn stuff from people i don't care were they are from ! it's all about sharing knowledge and yes i have learned something !
Ahahaha your English is fine I understand everything, it does help that I’m Dutch so even the german filler words make sense to me, thanks for the video very helpful keep it going!
@@survivalmastersinternational I have a great question for you, I am interested in a twist throttle that starts you off slow, because I notice that all the cheap $15 twist throttles that I a have used, knock you off the saddle as soon as you barley turn it to its minimal activation point, I am looking for a throttle that starts off very slow and gradually starts accelerating to full speed. Please refer me to one either through amazon link or a model and model number, I will subscribe to your channel upon you response. thanks
0:22 i did not know that scooters surpassed planes and jets already, thanks for letting me know, definitely got to get that 25km per second scooter. 😅😎
First off even in the UK a lot of these can be programmed in the LCD display if it is a lt100, lh100 QT - 100 and others alike it. Also make sure you giving out the right information some of these blue wires AR a self-learning wire not a rev limiter wire. The self-learning wire is usually white , blue or yellow unfortunately speed limiters are also white or blue single wire. Then there are some that the controller is just programmed into the system and if you do not know how to take the controller out or plug it into the LCD display reprogram it you're still going to have issues.
Believe me I know the self learn wires which uaually arent oresent on alot of major brand made controllers but any aftermarket controllers of course they are existent which is why I say its a case by case basis
@@zeekltd thats like a gotrax. Which usually is maxxed out for the most part but i cannot 100% say without seeing it myself so I dont want to give you definitive answer and mislead you one way or another
@Endlisswheelz I appreciate your response. How do you think I can get the carerra impel is - 2 faster? It's a very sturdy scooter but restricted at 15 mph, hard commute 😳 unlocked it will be alot of fun 😃
@@Endlisswheelz hey sir, how about Inmotion Air Pro? It's supposed to go 35 but is limited to 25km/h. Your advice would be very greatly appreciated! THX
Thanks man.. how do I make my front wheel move to so I can have both wheels move at the same time? just my real wheel moves when I push the trigger. I want both wheels to move when I pull the trigger.
I think this was a one deal video on their particular kind of scooter they got excited on discovering if a cable particular was cut the acceleration increased not necessarily meaning for every scooter it will do this because probably not every scooter has that blue cable on the controller as someone mentioned in the earlier comment it could be yellow or white
I have an ancheere that is identical to the jetson bolt pro and i might just go ahead and start cutting cables. Tired of going 15 mph. Sometimes i feel my ebike want to go faster but its being limited. So first wired to go will be the blue then the white to see wich one worked. Ill updat if i founf the wire
Would this work on a ZIPPER M6 350W? I have this scooter for running to shops on but it just doesnt have enough power to get me up the hills, a little more power and Id get up the hills no problems. Great video and your English is excellent.
@@theebikeguy3852 you will burn down motor. I hawe 650w and max is 1000 and I use it att easy hills 200m -300m cos it will brake my motor and mine goes 42km/h
Can’t imagine that walking was brand scooters like ninebot… at least the last time I opened it it didn’t have so many loose cables in there anyways. Can you show this with gd30d2 (new controller?
If you’re thinking of doing this please take note that each scooter comes with a limit for a reason (to keep the motor from burning out) Increasing it from 20 to 45 is almost double and will produce more heat and may burn your motor out. In total making your scooter un drivable ( you may risk a explosion)
OK, this video is from a year ago. I still hope you reply. I have the Jetson.J5 electric bike. I have a brand new controller and I’m waiting for a battery to come. My thing is would I be able to connect this new controller and then the speed limit limit or restrictor goes away as I’m connecting this new one any advice would appreciate it and I am subscribed.
Hey guys. I really liked the video. In this case, only the top speed changes or does the acceleration change as well? and can this also be done on the Iscooter X6 scooter? I would also like to ask if it will spin at maximum in all speeds or will it only go more in eg 3rd gear?
Is it a digital signal? Obviously you could use a switch for on/off limits speed but could you use a potentiometer to adjust the value / voltage to dial in your own top speed instead?
Great video guys! I am in England and brand new to electric scooters. Your command of English is great by the way! Dues to buy a Chaos 1000W 36/48V used scooter next Wednesday 2nd August 2023. I believe they can achieve 45 to 50 KMH which is 27 to 30 MPH. I am going to have an investigation on the throttle controller and see if there is a blue wire. If there is, then I will follow your instructions and see if it can increase the maximum speed. If it does, then I will extremely appreciative of you guys. Vielen dank!
Hi guys. Could you, please, check if cutting the cable improves starting uphill capabilities? I don't need higher speed, while starting uphill is more important.
@@BoykoRomanI know it's an old question, but anyway... On the lcd (when you press both buttons simultaneously), there is a something like "Launching the scooter" - P09 option. You have two choices : 0 - start immediately or 1 - push and run. One of those two has a bigger torque (If I remember correctly it's number 1)
Greetings from Oregon USA. Can you tell me if it is possible to increase the speed of an Afikim S3 mobility scooter? Do you have to completely disconnect or cut the limiter wire(s), or can you adjust the speed from the settings menu?
After I cut/disconnect the two wire described, I successfully enjoyed the faster speed. My battery is still in very good condition but the speed is stuck at P2 recently. My speedometer has been damaged three years ago without effect to speed control. What could have cause my max speed to be limited from unlimited.
@@rajifonte6703probably did you just want something to talk bad about someone for seems like you wana be the main character taking out the speed limiter can easily burn out your motor or controller know what your talking about before you say something bc then you’ll get embarrassed
I'm sorry for everyone who cuted the cable on their scooters... Here's a simple trick to get the same results on your scooter without damages in 3 easy steps. Step1: Press simultaneously *On* & *Mode* Step2: When the menu opens, go to *P8* by pressing 7 times on the *On* button. Step3: Hold *Mode* until the setting is at 100. Your wellcome 🤜
Love your engagement! 😊 thank you. I have an electric bicycle front, that I can attach to my wheelchair. I love it, it's very practical. But it's limited to 10km/h, and that's driving me crazy. It's so boring and slow. The name of the attachable bike is Stricker and it has a battery named Lipo Lomo. Is there any chance you could help me increase the speed on that? Greetings from Norway
Hello is it always a blue wire or what exactly should I follow how to know which wire it is ..I own an electric scooter Sencor Scooter one 2020 ( model name e9pro) I split the bottom cover where the cables are located but I do not know how to know which one is the limiter and I do not know if it is even possible to find the wire . I have read that some models have a software limiter. as far as I know the first models of this scooter were going up to 30kmh but after the update they are only going 25 and I can't change it even in the older version of the mobile app where the speed increases but immediately goes back again... Could you please help me ? Thank you.
I wonder if wiring a pedal or dial of some kind could be viable. It would be like shifting gears on a ten speed bicycle and it could also help keep the motor and battery cooler.
I just got a Navee V25 yesterday. In the advertisement it said it goes about 20 mph but it wouldn't go past 12 mph when I rode it yesterday. Do u know of a way to make it faster? Thanks for your help
Need help. I have a ninebot max kickscooter and there’s one big plug with a bunch of different colored wires, problem is there’s 2 blue wires, which one do I cut
Well what type of scooter is that? Because the Evercross H5 which is what that one looks like is already set at a max. Speed of 28 m.p.h. which is 45 k.p.h.🤔🤔🤔
They didn’t change anything they did not show you the speedometer. They just caught a blue wire for first gear. I have that scooter. It goes 46 km in general make it goes 60.
Thanks lads. I've just got my first escooter so I'm very new to scooting. Your English is perfectly understandable, far better than my German.
I would recommend running a on/off switch to the limiter with some extra cable to handle bars so you can run limiter when you are going slower to give the battery and motor a break or you risk cooking both.
What if I turn on a slower mode when I drive normal?
@@ArtemGradinar think it doesn't matter what mode you put it on after disconnect the limiter loop it will go full capacity in all modes so better to just fit a switch and switch on when not doing full speed also not a good idea doing full speed for extended periods without limiter or you will kill it.
Smart
I drive the exact same model since 2021, 7300km on it, stock battery (48V 26Ah model, „100km range“, realistic 50-70 km range) and unlocked since day one.
I go nearly all the time 30-40 km/h continuous, also steeper (longer) climbs with 20-25 km/h and nothing fried yet except the cheap LED high beams.
But i also used thermal compound to improve heat transfer from the controller to the frame as well let the motor cool off a bit when the motor overheat icon lights up the very rare moments in the hottest summer days.
I have absolutely no clue how you all think this „unlock“ will harm the scooter in long term. If you have not realized yet, those scooters are normally made to be delivered unlocked from factory (thats why many have a connector instead of a bare wire to cut), it just happens that in many countries they are regulated to either drive anywhere between 20 (23 with tolerances) and 25km/h legally so they are delivered in those countries locked.
When we talk about the battery…. you are absolutely right about long term damage, especially with the cheapest 48V 10-12,8Ah models with 1000W (2000W peak) motor, when the manufacturers have not used high drain Li Ion cells you can be pretty sure the battery will degrade „fast“, so probably less than 500 cycles even possible since you can discharge the battery entirely within 20 minutes (25km/h or more slightly uphill) (so 3C continuous)
@@harrison00xXx yeah alot of the cheapo ones have the not so great batteries in and generally won't do well with scooter draining full capacity I know lots of people who have done the speed limiter hack and ended up with a dead scooter. It's better to err on side of causion when giving advice about these too many cheap knockoffs out there. That upgrade of the heat compound is a very good suggestion anything to keep it cool is going to help alot I got a cheap escooto secondhand that I have rebuilt derestricted and so far just standard use not had any major issues apart from getting a bit of play in motorhub but that's unrelated to restrictions. If people want to risk it's ultimately up to them I don't mind finding cheap broken ones I can buy and fix😂
Greetings from America guys. It's 3am here and I am researching a gifted a Hover-1 Alpha 1.0. I must have watched 12 E-Scooter vids, and you guys win. I understood your English perfectly, but the accents made me a new subscriber! The demo was clear and concise. Touch wires, slow. Cut wire, fast. Hear it? Yes. Check the gauge. It's faster! I will do a switch when I mod mine, push for turbo mode!!
Did you do yours yet? I just got the 2.0 but im an adult and don't want to fry the motor with the weight. I assume this scooter is for kids. Do you like your scooter?
From 20 km/h to 44 km/h is a very good difference in speed. I bet this video has made a lot of people very happy with their scooters. Cheers guys
Which scooter u have
@@yt_spoon4989 yes
I think you two speak very well in English and since I love electronics and making "modifications" myself I find the content humorous and informative! Gut Gemacht!
i'm from belguim and as long as i can learn stuff from people i don't care were they are from ! it's all about sharing knowledge and yes i have learned something !
Facts
This about if it works. It doesn't matter where they come from.
if you are in belgium broer politie will not be so happy about this
Heeft het gewerkt
Nothing wrong with it but it also ain't legal doing so everywhere. Bad ppl gonna ruin it for us I fear all the time. Aka city democrats of usa
Ahahaha your English is fine I understand everything, it does help that I’m Dutch so even the german filler words make sense to me, thanks for the video very helpful keep it going!
Thank you , we are Glad you unterstand and like the Video 😁
Greetings
werkte het?
@Survival Masters Hi mate, do you know how to deristrict a Pure air pro electric scooter 500w?
@@survivalmastersinternational I have a great question for you, I am interested in a twist throttle that starts you off slow, because I notice that all the cheap $15 twist throttles that I a have used, knock you off the saddle as soon as you barley turn it to its minimal activation point, I am looking for a throttle that starts off very slow and gradually starts accelerating to full speed. Please refer me to one either through amazon link or a model and model number, I will subscribe to your channel upon you response. thanks
@@alexshatner3907 hi what twist trottle do you have ? cuz i want like the scooter to kick me off
0:22 i did not know that scooters surpassed planes and jets already, thanks for letting me know, definitely got to get that 25km per second scooter. 😅😎
People who noticed
Hope u don’t use arguments like this when trying to speak to ppl.
I am surprised you wouldn't go for the 32kps model his friend mentioned.
25 Klm/second limit in what country? wait 32????? they sure have JET Scooters there! 😂😜
First off even in the UK a lot of these can be programmed in the LCD display if it is a lt100, lh100 QT - 100 and others alike it. Also make sure you giving out the right information some of these blue wires AR a self-learning wire not a rev limiter wire. The self-learning wire is usually white , blue or yellow unfortunately speed limiters are also white or blue single wire. Then there are some that the controller is just programmed into the system and if you do not know how to take the controller out or plug it into the LCD display reprogram it you're still going to have issues.
Hey, you seem very knowledgeable.
Do you know if this is possible on a carrera impel is-2?
Believe me I know the self learn wires which uaually arent oresent on alot of major brand made controllers but any aftermarket controllers of course they are existent which is why I say its a case by case basis
@@zeekltd thats like a gotrax. Which usually is maxxed out for the most part but i cannot 100% say without seeing it myself so I dont want to give you definitive answer and mislead you one way or another
@Endlisswheelz I appreciate your response. How do you think I can get the carerra impel is - 2 faster?
It's a very sturdy scooter but restricted at 15 mph, hard commute 😳 unlocked it will be alot of fun 😃
@@Endlisswheelz hey sir, how about Inmotion Air Pro? It's supposed to go 35 but is limited to 25km/h. Your advice would be very greatly appreciated! THX
Very good English guys. I understood everything you said easily. Great video
Thank you 😊
@@survivalmastersinternational will this work on the Efoe /e scooter 3200W 60V21Ah that already goes 40mph ??
@@ChefMarty9740 not fast enough for u
@@survivalmastersinternational😅
😂
Thanks man.. how do I make my front wheel move to so I can have both wheels move at the same time? just my real wheel moves when I push the trigger. I want both wheels to move when I pull the trigger.
I wish somebody would answer my question on which cable do i cut on the emove cruiser.. been hard finding anything on line specific to the emove
Same question for the emove touring!
sam questionfor the motorx @@brankelly1921
Same for gotrax g2 plus
@@DhaoistAzazel brainless
I think this was a one deal video on their particular kind of scooter they got excited on discovering if a cable particular was cut the acceleration increased not necessarily meaning for every scooter it will do this because probably not every scooter has that blue cable on the controller as someone mentioned in the earlier comment it could be yellow or white
Will it work with a 2024 Ienyrid M4 Pro S+? What is the actual name of the wire needing cut so I can make sure it’s the right wire?
Did you try it?
You should show us how to do it on a go traxx scooter and a nine bot scooter
9 bots easy, just throw it in the trash can
Firmware is only way to do it on ninebot. Gotrax is not possible
@@Endlisswheelz what about gyrocopters ones? I have a Flash Pro Max and found nothing in the internet about it :/
@@EndlisswheelzAnything is possible, if anyone can make it happen on a GoTrax @endlisswheelz you can make it happen!
Chaos gt 1600 w scooter 🛴
I have an ancheere that is identical to the jetson bolt pro and i might just go ahead and start cutting cables. Tired of going 15 mph. Sometimes i feel my ebike want to go faster but its being limited. So first wired to go will be the blue then the white to see wich one worked. Ill updat if i founf the wire
so I guess you didnt find it hahah
thank you, you both did awesome.
Hanz and Franz did a great job. I just saved this and cant wait to do this to my scooter this weekend. Great job. You guys do great videos 👍
Is this video correct? Did u get more speed out of your scooter?
I would also like to know
Did it actually work after cutting the blue wire?
Did it work
I have one question my scooter shows that the speed is 99 km but it’s waking slowly
Stack overrode it lol
It is the e10 scooter ?
so what happens when it comes to dual motor scooters with 2 controllers like my dualtron ?
without cuting... gas pedal down then press right hand brake,then turn on ignition and wait 10 sek. tunr off ignition. done
Which models? - also Niu?
@@Cool-ng5rhjust tried it on my niu kqi2 pro and it didn’t work
What about Aprilia esr Evo2? I Can not find how to remove speed limiter
Same here! If anyone knows how to remove speed limit on this model, please help us out 🙏😎
The German accent is so nice, thank you very much!
I don’t care about the scooter I’m watching the video for the accent😂
I I used a toggle switch to turn the speed controller on and off. Off when no police are around.
Would this work on a ZIPPER M6 350W? I have this scooter for running to shops on but it just doesnt have enough power to get me up the hills, a little more power and Id get up the hills no problems. Great video and your English is excellent.
A 350w escooter can only top out at 20mph unless it's programed in the controller
@@theebikeguy3852 you will burn down motor. I hawe 650w and max is 1000 and I use it att easy hills 200m -300m cos it will brake my motor and mine goes 42km/h
@@k9teamzagrebskolazapse149 Jel funkcionira ova metoda za Xiaomi 4 romobil?
What if I cut the wrong cable? Or if it’s not white or blue?
have your wire strippers, soldering iron and heatshrink tubing ready to splice it back together
Can’t imagine that walking was brand scooters like ninebot… at least the last time I opened it it didn’t have so many loose cables in there anyways. Can you show this with gd30d2 (new controller?
My scooter doesnt have that sort of wire neither blue nor white what should i do? Can you help please
If you’re thinking of doing this please take note that each scooter comes with a limit for a reason (to keep the motor from burning out)
Increasing it from 20 to 45 is almost double and will produce more heat and may burn your motor out. In total making your scooter un drivable ( you may risk a explosion)
OK, this video is from a year ago. I still hope you reply. I have the Jetson.J5 electric bike. I have a brand new controller and I’m waiting for a battery to come. My thing is would I be able to connect this new controller and then the speed limit limit or restrictor goes away as I’m connecting this new one any advice would appreciate it and I am subscribed.
Hey guys. I really liked the video. In this case, only the top speed changes or does the acceleration change as well? and can this also be done on the Iscooter X6 scooter? I would also like to ask if it will spin at maximum in all speeds or will it only go more in eg 3rd gear?
top speed changes only
Bro did you do it? Did it work because I have the ix5 and i dont know if I should cut it did it work for you
Is it a digital signal? Obviously you could use a switch for on/off limits speed but could you use a potentiometer to adjust the value / voltage to dial in your own top speed instead?
How does this effect the load speed and torque? Theres a big difference between speed and torque, especially under load.
will this work for sencor scooter one 2020 please help fast
Great video guys! I am in England and brand new to electric scooters. Your command of English is great by the way! Dues to buy a Chaos 1000W 36/48V used scooter next Wednesday 2nd August 2023. I believe they can achieve 45 to 50 KMH which is 27 to 30 MPH. I am going to have an investigation on the throttle controller and see if there is a blue wire.
If there is, then I will follow your instructions and see if it can increase the maximum speed. If it does, then I will extremely appreciative of you guys. Vielen dank!
So its now august 26th…. Still waiting on your update……..that is if you actually bought the chaos scooter loooool
update?
We are waitiiiiinnnnggggg
Update please
You fucked it up didn't you?
I have a Olsson brother scooter. It goes 25km. But where can i find the blue cable? And is it always a blue cable?
Hi does this work for the 5th wheel M2 scooter?
Yes
My Evercross H5 already does 45 kph, will I find a limiter in this model?
Hi guys. Could you, please, check if cutting the cable improves starting uphill capabilities? I don't need higher speed, while starting uphill is more important.
Most likely you are running full power uphill already, if you are hitting speed limit when going up then you have a bit more power to unlock.
torque.
You need more torque.
@@jenntek.101 Correct. Any ideas if the wire has any effect on it?
@@BoykoRoman increasing speed is different that increasing torque.
Try a different sprocket on your motor.
@@BoykoRomanI know it's an old question, but anyway... On the lcd (when you press both buttons simultaneously), there is a something like "Launching the scooter" - P09 option. You have two choices : 0 - start immediately or 1 - push and run. One of those two has a bigger torque (If I remember correctly it's number 1)
@Survival Masters when you do this, is it still safe to charge the battery ?
Hey guys, did you happen to do the Hiboy S2 pro? I was wondering if it has a similar cable i can cut? Thanks and keep up the great videos 😊
Did you find hack to remove speed limiter ?
I have Hiboy s2 pro.
@@shubhamjayswal3049 i need info on the hiboy too
@@joeeberger1 same
Same I have the hiboy titan pro 2 I can go 32mph but I would like to go faster lol 😂
If there is a tweak for Apollo city pro, I would really appreciate it. Stuck in 20 miles.
Can you choose the speed when cutting?
does this work for pure electric scooters?
If you find out let me know pal, iv just got the pure 3 plus
Greetings from Oregon USA. Can you tell me if it is possible to increase the speed of an Afikim S3 mobility scooter? Do you have to completely disconnect or cut the limiter wire(s), or can you adjust the speed from the settings menu?
Bro, How can i know What is the wire to cut?
i think it’s if it loops on itself
any idea to do that with navee N65 scooter (500W motor) only 25km/h max speed
Thanks for the information guys. Respect 👍🏻
Hi I’m Kristin can u tell me if u can do this on an iscooter max ? And what color would u cut ?
It will destroy your battery
Yea agreed
I saw someone add a computer fan to cool it.
The correct battery will out perform the controller.
After I cut/disconnect the two wire described, I successfully enjoyed the faster speed.
My battery is still in very good condition but the speed is stuck at P2 recently. My speedometer has been damaged three years ago without effect to speed control.
What could have cause my max speed to be limited from unlimited.
@@bobcentinaje2774 controller or a hurt motor.
i have several diff color bkue wires and dont want to cut the wrong one. can you help me? i have a hyper skute brand scooter..pls help
It broke my scooter
No it didn’t u just wanted to say that , i bet. U wanted some attention?. U wanted to challenge them?
@@rajifonte6703 Fr
@@rajifonte6703probably did you just want something to talk bad about someone for seems like you wana be the main character taking out the speed limiter can easily burn out your motor or controller know what your talking about before you say something bc then you’ll get embarrassed
Du you guys know how to tune navee v250 pro let me know
I think it better to connect that blue cable to a switch you can toggle. So if you want to engage the speed limiter, you can.
I'm sorry for everyone who cuted the cable on their scooters... Here's a simple trick to get the same results on your scooter without damages in 3 easy steps.
Step1: Press simultaneously *On* & *Mode*
Step2: When the menu opens, go to *P8* by pressing 7 times on the *On* button.
Step3: Hold *Mode* until the setting is at 100.
Your wellcome 🤜
What does that do??
Its easy to fix the broken cable anyway
@@deliriousbeats8940 it unlocks full power, *P3* is your acceleration. Be careful not to change any of the other settings 😃
@@luisfclopes9596 yes but why cut cables when you can simply change the settings 💁♂️
how can you do this on the kqi2 pro? It only has one button
DO ALL SCOOTERS HAVE THAT BLUE WIRE AS THE LIMITER? I HAVE A IENYRID M4 S+ PRO 2024.
Will my scooter catch on fire or explode due to this???
Hi my e bike Andersson 7000 gos to slow I wonder why.how to make it faster ?
Gratings Beck.
my friend, how about beyond sv1 electric scooter. what color? no language barrier. what color for the scooter?
Love your engagement! 😊 thank you. I have an electric bicycle front, that I can attach to my wheelchair. I love it, it's very practical. But it's limited to 10km/h, and that's driving me crazy. It's so boring and slow. The name of the attachable bike is Stricker and it has a battery named Lipo Lomo. Is there any chance you could help me increase the speed on that? Greetings from Norway
You guys are awesome do you know a way to make the jetson bolt pro electric bike faster like this cut wire? I look for wire but no luck?
can you do that in all xiaomi scooters?
Hi guys. I found my scooter's wires but not sure which one to cut. Where can i send you couple of pictures so to advise me?
How do you get rid of the GPS on your scooter so nobody knows where you're at on a moon scooter
How can we tell which wire is the limiter on other brands such as ninebot?
How would I remove the speed limiter on the hover-1 highlander scooter?
great guys but what if they have changed the colour hehe I have got yhr ZT3 Pro , so will this work ??
I have a iscooter ix5s and would like to remove speed limiter I need help
How are you able to identify which wire goes to the speed limiter. It can't just be color.
Hello is it always a blue wire or what exactly should I follow how to know which wire it is ..I own an electric scooter Sencor Scooter one 2020 ( model name e9pro) I split the bottom cover where the cables are located but I do not know how to know which one is the limiter and I do not know if it is even possible to find the wire . I have read that some models have a software limiter. as far as I know the first models of this scooter were going up to 30kmh but after the update they are only going 25 and I can't change it even in the older version of the mobile app where the speed increases but immediately goes back again... Could you please help me ? Thank you.
I wonder if wiring a pedal or dial of some kind could be viable.
It would be like shifting gears on a ten speed bicycle and it could also help keep the motor and battery cooler.
I have a caroma with a seat I have the battery and controller exposed but there is no blue or white wire that loops .. what do I do
What model Caroma do you own?
Do you know how to unlock the Red Bull Race Ten turbo 500W 10" 12Ah battery scooter? Is there a button combination? Please help.
Is it the blue wire for every scooter??
I just changed the settings on my solar P1 pro and get just over 42mph. Can you hook them up pc and make them faster that way some how
Hello thank you for the tip! Will this method work with a Valk eScooter?
Hey I have a gotrax GXL V2 and the throttle stop working can you make a video of how to fix or any recommendations???
Does this work for the iScooter m5 pro becuse I took of the cover and there is only red and black wires ?
Wsp guys I have the go trax G4 electric scooter it tops at 20 mph 500w rear motor is there any way to pass or cut the speed limit?
Do you have any tips on how to make electric cargo bike faster I have a fiido titan
Hi can you tell me what wire to disconnect on my niu kqi3pro to illuminate the speedgovernor
I just got a Navee V25 yesterday. In the advertisement it said it goes about 20 mph but it wouldn't go past 12 mph when I rode it yesterday. Do u know of a way to make it faster? Thanks for your help
Geht das auch bei dem neuen Nui Kqi 300x?
yes
Need help. I have a ninebot max kickscooter and there’s one big plug with a bunch of different colored wires, problem is there’s 2 blue wires, which one do I cut
did you find out
Don't work on mine e-scooter. My head is going crazy. Nothing works!
on my scooter I have two blue wires, a thin, one and a thicker one. Which one should I cut?
Cut them both to see which one removes speed limiter, the one that isn t the speed limiter, connect it back
Dad that work
Did that work I ment hahaha
@@DJSEBAKEmine won’t work anymore 😢
@@ForzaHorizonDriver2024same thing happens to me spent 600$ sucks
Xiaomi M365 pro 2 2023 is this the same, and color of the cable to cut??
Well what type of scooter is that? Because the Evercross H5 which is what that one looks like is already set at a max. Speed of 28 m.p.h. which is 45 k.p.h.🤔🤔🤔
I have seen moped dynos in Europe.
If you do this, make a hidden switch that you can enable on the fly.
Can this process work on my ducati pro 11 electric scooter?, please kindly answer me
Hi guys. Would it be possible to do this to the SEGWAY NINEBOT F25E ? Thanks.
There is this cable on jeep e scooter urban ? Thanks
My buddy and I cut the blue cable and no boost, any tips for ACER ES 5?
I need to know which wire to cut on my Bolzzen atom pro scooter. Anybody know any advice for this scooter model ?
Hiya.. ty for ya vid.. do you know if it's possible to do this to my my zinc e scooter.
They didn’t change anything they did not show you the speedometer. They just caught a blue wire for first gear. I have that scooter. It goes 46 km in general make it goes 60.
Which wire will it be for the evercross H5
yes black
What ninebot kickscooters model Can remove the speed limit on?
Frage, funktioniert das auch beim insinwheel e9 klassisch? Kenne mich null mit Technik aus
How can i know whats the limiter? I just bought my scooter i saved up a year for it was 1500 and im scared
Can you do a video for the pure air4 as they don't have a speed limiter wire
Does it work with Gotrax ultra gmax? If not please show me. Thank you.
Hey guys great video. I have a ocean drive Z5 pro that is limited to 20km. It has a sports mode but I can unlock it. Do you have any idea how