ADO A20 / A20F / A16 S866 LCD - Complete Settings Walkthrough (P01-P20)
Вставка
- Опубліковано 30 тра 2021
- ▶Follow me on Facebook for daily updates: / techtronic9000
⬇️⬇️⬇️OPEN DESCRIPTION FOR MORE INFO⬇️⬇️⬇️
Complete guide on all the P settings from the advanced menu of the ADO A20 eBike equipped with the S866 LCD display.
ADO bikes & accessories are available from the official shop
bit.ly/OfficialStoreADO
ADO spare & upgraded parts can be found on the official AliExpress store
bit.ly/OfficialStoreADO_AliEx...
You can now also join the Official ADO users group
/ adobike01 - Наука та технологія
ADO bikes & accessories are available from the official shop
bit.ly/OfficialStoreADO
ADO spare & upgraded parts can be found on the official AliExpress store
bit.ly/OfficialStoreADO_AliExpress
You can now also join the Official ADO users group
facebook.com/groups/adobike01
Hello sir. Can you help me? I bought a zip swft bike which have kind of the same settings on the lcd screen. I don't know what happened, the pedal assist stopped working. I did everything you showed but is not working. Can you help me?
P17: Cruise control, keep + or - pressed (I don't remember) until cruising speed begins, indicated by the icon on the display
DEFAULT SETTINGS 🙃:
P01: 2 (Display brightness)
P02: 0 (Km or miles)
P03: 36 (Nominal voltage)
P04: 10 (auto sleep timer minutes)
P05: 0 ( power assisted mode )
P06: 20 (wheel diameter)
P07: 1 (number magnets motor)
P08: 25 (speed limit, increase to 44 for max speed)
P09: 0. (non zero start, 0= no pedal needed)
P10: 2. (drive mode, electric, assisted or normal bike)
P11: 2. (assist delay since pedaling started)
P12: 3. (Strength of acceleration)
P13: 12 (PAS sensor)
P14: 15 (controller current limit)
P15: 29 (battery controller voltage limit)
P16: 0 (reset odometer, km to 0= new bike)
P17: 0 (cruise control)
P18: 100 (Display range adjust)
P19: 0 (0 gear assisted)
P20: 0 (controller communication mode)
Thanks, that is also useful.
Do you have the factory default settings for the A16+ ?
Thanks. I needed that after I messed around too much with the settings.
P06 is different, should be 16, the others should be the same.
Nice one bro that's a big help...
Summary for y’all:
P01: Brightness
P02: Km or Miles
P03: Voltage (Only effects how battery gauge reads)
P04: Control panel sleep time
P05: More assist modes
P06: Wheel diameter
P07: Number of magnets
P08: Speed limit
P09: Start with pedaling or not
P10: 0 = assist 2=both HAVE ON 2
P11: Assist delay
P12: Acceleration
P13: Pas sensor (DO NOT TOUCH)
P14: Limit to prevent battery damage
P16: Reset odometer
P17: Cruise control
P18: Speed tuning
P19: Assist or electric mode
P20-P22: DON’T FUCK WITH
thank you!!!!!!
I only got p1 through p7
hi there today when im cycling my electric bike the clock is just stay at o mph the bike is work but the clock wont change have you any idea thanks.
@@delboyfc74I probably have the same problem. MPH locks, but can still use the pedal assist on my EDISON ebike!
Currently checking out other videos on how to reset the s866 to factory settings!
T
Listening to you explain the settings rather than trying to decipher the manual was so much easier! Big thanks from the UK :) 👍
Glad it helped!
Well said. Thank you from Ireland also (howdy, neighbour....).
Excellent video. The only UA-camr who actually goes through the settings
Thank you!
Thank you so much for taking the time and explaining it so thoroughly - gonna go tune my controller now and will KNOW what I‘m doing ;) Thx again!
Glad it helped!
Dziękuję bardzo. Świetne wideo 👌
Thank you. The very best explainer on UA-cam.
Glad it was helpful!
I've noticed my stem is wobbling after a few weeks. If you have a video on that, I'd love to watch it.
Wooooow you saved my day, thank you very much sir I knew there would be a smart person as yourself that would know more about sheng milo mx20
Glad I could help
@@TechTronic9000 you did sir thank you very much
I almost sold my bike and start looking for a new one !! U saved me bro !! Thx 🙏 😅
Glad I could help!
Thanks for the helpful video. Got my bike today!
Just ordered this coming in tomorrow thanks so much
Very informative video Sir.. Thank you for this. I have a Emotorad t-rex which has this display unit. Due to restrictions in India i'm unable to go beyond 25km/h. Now I set it to 35km/h it runs more faster than usual. Thank you ❤️
Glad it helped
Grazie utilissimo 🔝🔝🔝🤩non andava più la mia bike …….. però forse mi è saltato il faro davanti per la variazione di alcuni parametri 🤩🤩🤩
Thx a lot! 👍
Similar lcd is in Bezior xf200, I'll check it today.
I'm glad that this was helpful for you.
THANK YOU So So So Much ❤ This video has helped me set up my Bezior XF001 👍🏽 My controller is different but the interface is exactly the same for the list of settings 1-20 👍🏽
You seem to be the only person who explains all the settings in detail on the whole of Yourube haha 😆 So thank you again from Scotland 🏴
Glad it helped! Sadly I'm also one of those persons that only get the lowest views and subs :)
@@TechTronic9000 Your video is rubbish an slow effort. You could have spent the time to make a better video, properly edited.
Try to do that on his behalf. You are the only negative person here😡@@Crashawsome
very good explanation for the settings , i did not see anything on regards to the Battery Indicator , as mine does not go down with use , so i can not see how much power is left after a period of time , maybe the battery indicator is fulty ? what would you advice ?
Hello. Excellent video mate.
I just got a second hand ADO A20 and I try to reset odometer but I can't do it.
I am at P16 pushing the minus button to change my km to 0 but nothing happens
Thanks for this helpful video. I managed to get the cruise function to work after activating it on the settings panel. Just hold and keep the speed you wish in assist mode 2 or 3 for about 10 seconds. This activates the cruise mode.
Do you have the newer controller?
@@TechTronic9000 Maybe, not sure. My bike was stolen a week after I got it 🥴
Sad to read that.
Can confirm that, cruise control works, I have the same model. Not sure tho if it holds the speed, or rather it holds (throttle input,) engine output level instead.
Also, thank you for this video :)
Cruise control only works with the new controller, check my new videos with the A20F controller upgrade and test ride.
Hi there. Thanks for the great video. My ado A16+ only has 3 assist and throttle only works on assist 3. If I change it to to 5 assist, does the throttle work in all levels? I am curious to know. Thanks
Thank you so much!!!!! Really helpful.
You're welcome!
Very good and informative, I have just fitted the newer controller and cruise control definitely works
The cruise controller option is related also to the installed controller, on the particular ADO ebike model with 1st generation controller this was did not work. It was soon upgraded to version 2.0 and this was enabled.
What model is the newer controller
@@Subscriptionexperiment I am sorry i sold the bike just after, I wasn't particularly impressed with it breaking all the time
Thanks. I'm looking at the s900 display. I just want a display that has cruise control.
@@Subscriptionexperiment it wasn't the handlebar controller this is the replacement controller box inside the frame i changed that gave that functionality
Very helpful and straightforward thank you
Glad it was helpful!
Thank you for this video, very well explained
I'm glad you have found my video useful.
Can i switch on and off for PAS mode and throttle mode? And do this meter able to work on all controller?
Thank you so much. From Paris
You are welcome!
This works for my IX4 scooter. Thanks.
Glad to help
Excellent video!
I only have one question. What should I do to reset the odometer? Do I just push the minus button to reach the 0km?
What you're probably going to do is go to the odometer setting and then push and hold (-) button. I doubt it but it may also be the power button, having to hold that
you are doing god's work my friend
Glad you enjoyed it
Thanks for explaining, help me a lot, great job.
Glad it helped!
Hi, Your videos are excellent!! Very detailed so I can know what to expect when I buy an ebike. Could you tell me how many teeth the crank wheel has? You talked about increasing it to 58 teeth so the rider doesn’t ‘ghost’ pedal. Your English is perfect!! Thanks, Bill (UK)
The sprocket has has 48 teeth. Thanks for watching and consider subscribing ;)
Very usefull information, thank you very much
Glad it was helpful!
Very helpful - thank you Sir.
Thank you very much. Interesting information. Thanks.
Glad it was helpful!
Super bien explicado, muchas gracias!
Muchas gracias
Hey, thank you for video. Very useful.
Is it possible to show battery life in percentage “%”? When I turn on the display I can see for a few moments percentage and then it will be disabled.
By pressing power and “+” button I can enable Max (MAX) and Average (AVG) modes. But I can’t switch to Distance (DST) mode. Can you please help me? Thank you in advice 😊
Battery is displayed only as "bars" and accurate as voltage.
Great video, very informative. Please could you tell me the best settings to have with a 36v battery, it seems to switch off the lcd display and cut everything out when i use pedal assist on a hill even on a fully charged battery. The bike is only a few months old too.
Hi, did you manage to solve this problem? I have the exact same issue..
Thank you so much. I have an A26 and this video helps me a lot.
I just have a question: Is it normal when I go through a hole in high speed, the display shuts down and sometimes it's hard to turn it on again. Many times the display only turn on if I push and pull weakly the battery.
You have a loose plug or connector, I would check all the plugs and wires.
Thank God someone put out the video manual on this display as I had no idea what to do with it. Now I know everything I need to. Thanks to you good man in video!
Glad I could help
Respect on a Great set of videos on the Ada a20f really helpful and informative I was hoping to upgrade my motor to a 1500w and my battery to a 48v 19.2ah mounted on the frame and upgrade my controller but I want to keep my display and currant wiring don't want to change everything can you recommend a controller that will support this please.
Well then you are lucky, the ADO A20F comes with a dual voltage controller which works for both 36V and 48V, while the power is limited to 15A which at 48V is 720W already! Just enter the settings and switch to 48V.
did you upgrade the hub motor?
@@mikewoolnough9102 no I found the current setup to be enough power I did change the handle bars and seat and put some mudguards and a mirror on but other than that I've left it alone thanks for your input.
Very helpful, thanks 👍
I'm glad you liked it. Thanks for watching!
To get cruise control to work at least on my bike ( I have a s866 controller it's a hit way bk11) hold the throttle in a comfortable position say going 13 mph hold it there then push and hold the negative sign (-)on the controller. After a good 3 to 5 seconds a letter "P" will appear on the display where the assist value number normally is.you'll be able to let go of the throttle and you should be able to maintain that speed even if you start pedaling. I use this function to set my speed to something that's comfortable for me to keep pedaling with resistance while in 7th gear and not feel like im doing the running man..lol. just a nice powerful pace and I can continue to provide manual power and save a lot of battery as my pedaling and the cruise control work in tandem. Please let me know if you were able to get this to work for you.
Thanks! This helped a lot.
Glad it helped!
thx for the nice tutorial.
is there any way to set everything back to default ?
There is no default, you just need to set them properly for your bike model.
I just got an A16 this week was working perfectly, but I noticed over the last two days only the pedal mode assist was accelerating me and not the right trigger. It seemed as though the right was broken but I don’t know any ideas ?
Great video
Thank you!
Hi thanks for the video I just got my AF20 and the motor doesn't engage I don't know if I got the settings wrongI got no power whatsoever or throttle the controller is an 866 is there any factory settings? The controller doesn't show any speed or distance and I noticed that the cover on the left pedal is a bit loose (guess where the magnet is situated) any help here would be appreciated. Thanks
You probably have the new controller, check this newer video for that one ua-cam.com/video/rL0P9gW5x4U/v-deo.html
Very informative, thank you!
I don’t understand the P15 option though. Are you saying you’ve set it at 29V which makes the Bike battery turn off once it gets to this voltage when riding?
I’ve got a 12-15 mile commute to work and I plan to re-charge the battery when I get there. My plan is to set the P15 option to 0v or 1v. Is there any harm to the battery in doing that?
P15 is a battery over-discharge protection built into the controller. At 29V you are at 2.9V/cell which is already low, going lower that that it will quickly destroy the battery.
No matter what the setting is on the display, the bms in the battery will shut down at a safe level (low voltage cut-off). Also, how far cells can safely be discharged depends on which cells they are. Some can safely be discharged to 2.75, or even 2.5v.
You don't want to run it that low as irreversible damage to battery may occur
My cruise control works great on my ADO A20+ in the 3rd gear (no pedal assist mode)....it turns on after a 30 seconds at least.
That works on newer controllers, including the "+" models. This was an initial release with another controller.
i dont understand how i can reset the odometer,the p16 can you make a short video for that? will be so useful thanks
Hi, do you recommend ADO A20 or the Fiido D4S? Considering the pedal assistance as criteria
The ADO assistance works better as you can adjust the delay, although it only has one single assistance level, check my full review for more details.
@@TechTronic9000 thanks for the reply. Just saw your review too. Very informative 😊😊
Hola muy buen video, una pregunta en el P09 arranca desde la primera pedalada? O hay que esperar dos pedaladas igualmente? Gracias
Puedes ajustar el retraso desde P11, tiene 24 niveles de retraso que puedes ajustar.
@@TechTronic9000 entonces si lo pones en 24 desde el primer instante ya te asiste?
@@tonisuredajuli7 el p09 activa el control del acelerador para que actúe desde parado o llegando a los 6km/h. Si lo dejas en 0 y tienes activado el modo híbrido o eléctrico puro es como si fuera una moto.
El p11 es un delay en segundos de la asistencia. Mejor dejarlo en 0
Thanks for this video, very handy! I just bought a ADO A20+ international and I tried to unlock the speed limit. Already set P8 to 100 and P5 to more levels of assist. But yesterday when I tried it I could not go faster than 25 km/h. Don't know why... Does the 35 km/h only works in hybrid mode with throttle or does it also work with electric assist? I didn't receive the throttle yet, so can't try that.
Did you need throttle I'm having the same issue.
More levels of assist will not give you more speed. I'm not totally sure about your E-bike model but mine has 3 levels. If I change it to 5 or higher, it just basically continues assist levels 3 to the highest assist level "number on display"
That was the most complete video of how to set these up. I have just ordered one of these as my controller has gone bad and was wondering what happens if I remove my battery from the bike to take indoors to charge. Does the display loose all the settings and have to be re-programmed again when I put the battery back ? Many thanks for the video and I await your reply.
The setting will remain saved even you remove the battery, so no need to reprogram. Thanks for watching my video and consider subscribing ;)
@@TechTronic9000 Thanks so much for that, My controller and display arrived this afternoon. I have installed them and find the pedal assist will not work but the walk assist works when I hold the - button down. I maybe need to look at the settings when I have more time. Thanks again and I have just subbed.
Check motor magnets, and check assisted sensor type settings, also adjust the assist delay.
@@TechTronic9000 Thanks for that, it appears the problem is with the PAS sensor on the crank. It's wired colour for colour on the plug and the LED on the sensor flashes as I turn crank but no rotation of motor. If I touch the blue and black wires in the PAS sensor plug from the controller together at one second intervals or faster the motor runs fine. I guess the sensor may not be compatible with the controller, any thoughts would be great. Thanks again.
Maybe the sensor wires are not corresponding with the controller one.
Hi great video I bought my bike a couple of weeks ago The throttle does not work even after your set up advise I complained to the shop and asked for a new throttle this arrived eventually I fitted off the bike went through the set up but still does not work would this be a faulty controller
You need to enable the throttle from the settings, also enable zero start. Also if it's the new controller check my videos regarding it. You also need to enable throttle mode on it.
Thanks for the video...😁😉😎
I'm glad that you have found my video useful. Thanks for watching.
If p9 is activated (accelerator from zero) then by pressing and hold the minus symbol the motor is activated perhaps to enter walking mode off the bicycle and pushing it by hand
Yes, holding the "-" will enable walk assist mode.
So will this work to help get it up stairs..I would like to get one but stairs to my apartment
Hallo i have urbanglide ecross pro boost 1600 i must do the same procedure to unlock the speed limit?
Hi, thanks for the video! Do you know any good battery to upgrade the A20 one? Like a 48v 12a instead of the 10a
It will not fit the frame, you can do that only with an external battery.
Hi yes there’s a 48v 10.4 on eBay at £190 I’ve just bought one and fitted It will increase speed but not by much maybe 4mph so not sure if it’s worth it I’m 12 stone in weight max speed 22mph When checking off the bike using the stand it managed 28mph So weight makes a difference
Hi yes there’s a 48v 10.4 on eBay £190 it fits but will only increase the speed to 22 mph using the stand and wheel off the ground 28mph So depends on weight
If you go with 48V you would probably get a ~ 30% speed increase, so you will probably do about ~45km/h. That would be more than enough for the A20.
I bought the 48 volt upgrade for my a20f and it fits in the frame fine, ive had 31 mph from mine now but it will comfortable cruise along at 25 26 mph
thank you from the uk
I'm glad you have found my video useful. Thanks for watching.
Are we supposed to click any buttons in order to save the settings ?
Hi Sir, thank you for this video. I am totally new to e-bikes, i live in Holland, so only 25kmh pedal assistant with no throttle are allowed on the public roads. I want to adjust the settings to follow the rules, what settings and steps should i apply? Doesnt matter what i do, nothing changes
Hello. You need to replace the controller with the new hybrid one, it's very easy: ua-cam.com/video/Pyl3P8tiyhA/v-deo.html then you will have 3 working assisted modes and also be able to disable throttle completely: ua-cam.com/video/rL0P9gW5x4U/v-deo.html
@@TechTronic9000 do the bikes being sold as international model now have this new controller?
I very much appreciate the way you explained how to program the S866. Thank You!!
I have a problem that I've not been able to solve; I hope you can help or anyone reading this!!. I have an Extreme 36V bike, and I've replaced the controller with a Zerone Brushless Controller that I got on Amazon. Everything seems to work except--- once the PAS engages the motor, it accelerates (fairly rapidly) up to the maximum speed for the range setting. There is no proportionality to the rate of pedaling to the assist from the motor. It's all or nothing. It's my wife's bike, and she can't ride it that way. Is there anything I can change so that the assist is in some way proportional to the speed of the pedal rotation?
Here are the settings I've programmed:
P01: 2
P02: 1 (miles)
P03: 36V
P04: 3 (Auto off, 3 min)
P05: 1 (5 assist levels)
P06: 26 (wheel diameter)
P07: 80
P08: 100 (speed limit)
P09: 0 (zero start enabled)
P10: 2 (Throttle + Assist)
P11: 5 (PAS Sensitivity)
P12: 3 (PAS Start Intensity)
P13: 8 (Number of PAS magnets)
P14: 20
P15: 26 (undervoltage level)
P16: 25
P17: 0 (cruise disabled)
P18: 99 (speed ratio adjust)
P19: 0
P20: 0
P21: 0
Try and experiment with by increase . decrease values. P12 should modify how fast it accelerates.
P11: 5 (PAS Sensitivity)
P12: 3 (PAS Start Intensity)
Hi have to mention the other problem some bikes are sent out with throttle disconnected and have the new controller fitted To unlock you have to hold right hand brake and full throttle in off position turn on bike wait 10 seconds then turn off then back on then the motor will work
Then you are lucky you got the new generation controller, a very wanted upgrade part for our older initial ADO bikes. You can check my other videos in regards to this matter.
Can you please help me to get my throttle mode back on .. I have E 08 on screen. I think the problem that caused it was after I carried a bag over the handlebars and it maybe has hit something like the horn and lamp buttons.. not really sure tho.. that was directly after this happened (No Throttle) Ado A20F Thanks for great videos.
hey what would be the best setting for battery under voltage protection thanks??
Not lower than 32-33V for longer lifespan, you can even choose 34V but it might cut out too early.
Hey I got my ADO A20+ the other day, loving it. Im unsure how t oactivate cruise control though, any ideas? Pretty sure mines the new controller.
Cruise control can be activated by holding and maintaining the throttle at the desire speed for 5 seconds
If it's the new one, the cruise control activates after keeping throttle constant for several seconds.
You may have to do that and also hold (-) for approximately 5sec. I have an S866 display.
Thank you
You're welcome
Thanks for the video. I have a question. When I start pedal and electric motor start running too. But when I stop pedal the motor will keep running about few seconds. Witch one can adjust when I stop pedaling motor will stop right away. Thanks again !
Check the assisted delay setting.
Just lightly pull brake lever
can you help me on the manual of this controller says "P12: Help start intensity setting range: 0-5;" and in this videos you said "P12: Electric mode acceleration strength" is this the same? very nice video btw, also i have 1000w ebike with 48V/15Ah baterry and Control system is "48v20a Vector controller" in P14 what setting should i use? 15a? 20a? default number its 13 don't know why
It's the same, it's how fast the motor will accelerate. For your second question I can tell you from my experience that the amp setting usually doesn't work, so default or maximum it is the same.
@@TechTronic9000 tks allot for the answer brother one thing i have notice is that ebike seams to have allot more power if i put P14 on 20a , i tested with 12a and seams allot more slower is that anything to do because my battery is 15ah ? or this setting have nothing to do with baterry power!? for the record "P12 was on 5 booth times while testing this. another weird thing that is happening to me now its that KM/H gets stuck on 34/35 even if iam going 40 or even 45hm/h have tested with GPS till 34/35 shows the same as the GPS after that gets stuck there and gps shows whatever more than 35 iam going 40.. 45.. etc.. any clue? sorry for long reapply hard to find help with this stuff online
Theoretically P14 changes the maximum allowed current for the controller. This should also be supported by the controller. It has nothing to do with the battery capacity, is it just allowing more power to go to the motor. I have seen this speed freeze on several other bikes when you unlock them and ride fast. Haven't found a way on sorting it out.
My menu P13 is set at value 10 (I am unsure if the A20 came like this, or I changed it by mistake when playing with menu. Do you think I Should change to 12 as per on your video? Many thanks.
That is for the assisted system, if your works normally then don't change change it.
Hello . If I set it to a smaller wheel size will it make the motor go faster if it thinks it has to make up the speed
No, it will just show wrong speed as that setting is just for display calibration. You can check my other related videos about ADO bike to see how to unlock them.
@@TechTronic9000 ok thanks . I will do . My bike was limited to 15 mph I've unlocked that but my bike only does about 19 or 20 mph if I peddle really fast. Hopefully I can get it abit faster
Best bet... Go on a diet. I max my Hit way BK11 (US edition) at 22mph gps calibrated. If I wasn't 260lbs and was closer to the 70 kg little boy they used to get the bikes specs I would probably rip lol😂.
Oh, another think you can do to get your bike to go faster would be too get a 60lb neighborhood kid to rid it. I mean you won't be on it but your bike will haul a55 . Lol
@MrWrr3rd I have a 1000 watt hub kit now with a 52volt battery . Much better
Thanks for you help, do you know how to reset it back to factory settings?
There is no reset to defaults. You just need to set each parameter correctly.
DEFAULT SETTINGS
:
P01: 2 (Display brightness)
P02: 0 (Km or miles)
P03: 36 (Nominal voltage)
P04: 10 (auto sleep time minutes)
P05: 0 ( power assisted mode )
P06: 20 (wheel diameter)
P07: 1 (number magnets motor)
P08: 25 (speed limit, increase to 44 for max speed)
P09: 0. (non zero start, 0= no pedal needed)
P10: 2. (drive mode, electric, assisted or normal bike)
P11: 2. (assist delay since peddling started)
P12: 3. (Strength of acceleration)
P13: 12 (PAS sensor)
P14: 15 (controller current limit)
P15: 29 (battery controller voltage limit)
P16: 0 (reset odometer, km to 0= new bike)
P17: 0 (cruise control)
P18: 100 (Display range adjust)
P19: 0 (0 gear assisted)
P20: 0 (controller communication mode)
Lots of comments about "old controller" and "new controller" - We can only see the one we have and have no way of comparing. How can we tell the difference?. What should we look for - type number?, serial number?, display and/or mode options?. There must be a quick way to identify each type.
For that you can check my controller swap where i talk about details, you see both controller and how to replace them: ua-cam.com/video/Pyl3P8tiyhA/v-deo.html then you can follow up the test ride where I explain more about it and show how it works: ua-cam.com/video/rL0P9gW5x4U/v-deo.html
If you press and hold the minus - button the bike goes into walk mode at 3 mph / 4.8 kph.
Pull breaks to disable.
Yes that is the walk mode
Delighted to hear that as stairs to apartment..do you know can you wheel it when folded
@@debee1544 I believe the battery is disconnected when you fold the bike.
Thank you. I have stumbled on your channel because, I was messing with the settings and I have lost my assist mode though I still have the throttle. What have I done wrong?
Check all the settings to be similar with the ones from my video. Do you have the newer controller?
@@TechTronic9000 I have change all settings. I copied all your default parameters. It's now working properly. Just one thing, I have 0 1 2 3 , 1 is pedal assist which I find a bit of a surprise jolt of speed and I have to brake sometimes because I might hit somebody in the street. is there a way I could tame it a little bit. it's only 1 that works as pedal assist. 2 and 3 are the same using the throttle. Is there something I can do? Please enlighten me and thanks a bunch.
It looks like you have the old controller model, you might want to upgrade to the newer controller, that woul give it 3 assist modes. You can also tame this controller by reducing acceleration power (see in video).
@@TechTronic9000 Thank you very much for the info, I would greatly appreciate it if you make a separate video tutorial about that, I'm sure many have the same problem. Thanks. Btw, I have Cruise activated, that means I have the newer version of a controller?
thanksforthis video ,now i know why my battery always was empty fast sellertoldset on 48v but youre advice put it on 36 voltit doesnt change speed but battery not fast showing empty had buy new display so now and rhank youre very good explaining video i got it working as should really good thank for this video ( even i have other bike works with correctly as it should )
I'm glad to read that my video has helped you.
yeah i had rouble do,i have 48 voltso i put on 48 volt,because on 36 ceepsshowing a full battery,im charging now but dont know how much volt must show on display when full charged because dont know if safety and overcharge still work,@@TechTronic9000
Thx for the video helped out a lot. Getting a sub from me good sir. Hope your day is as good as you just made mine.
Thanks for the sub! Glad it helped you.
Thank you sir
Hi. I Have A16 but it doesn't have accelerator and it goes automatically. Do you know how do we control speed if we have to increase or reduce speed. Thanks
Should the voltage be set to match the battery? My battery is 48v, so should I set it to that? Or is under volting okay?
I got my bike second hand and all the settings have been changed for max speed lol so I wanted to make sure all the settings are okay. Don't want to damage the battery
There are 2 voltage settings, one is for the cut-off so you don't over discharge it, while the other is for nominal voltage so that the controller know hos to display how much % battery is still left.
Hey! Iron, man!
Do you know how to reduce the intensity of PAS? Poor terrain and even the first of five PAS levels is dangerously powerful in the Shengmilo MX20. It’s almost fun that PAS accelerates and go to higher speed than the throttle! So I'd want scale all assist levels down, acceleration and speed. Is it possible? Thanks.
Yes check the motor acceleration level and motor delay.
@@TechTronic9000 What are their names? P11 and P12??? Thanks.
@@TechTronic9000 Hi! I went into settings menu put last parameter you can go is P08. After that you get back to P01! :( How to access all parameters?
You might have something similar but different.
Have you resolved this problem? Mine bike, also, very powerfully on pedal assists. Just few pedals rotations and the bike starts in full power. Doesn't matter which assist levels are using.
Once again thank you for your reply I set it at 000 on program 9 but throttle still not working even after replacing throttle It must be the controller at fault as I have set all programs as suggested thank you
Is it the new controller version? That needs activation for throttle with a different procedure. You can see both controller and how to replace them: ua-cam.com/video/Pyl3P8tiyhA/v-deo.html then you can follow up the test ride where I explain more about it and show how it works: ua-cam.com/video/rL0P9gW5x4U/v-deo.html
PO9 set to "000" will disable throttle. Try PO9 set to 002
Hi . Thanks for the good reviews but my A20f does not have trottle response. Do I have to upgrade the controller ??
Do you have the old or new controller? For the new one this is how to enable the throttle ua-cam.com/video/rL0P9gW5x4U/v-deo.html
@@TechTronic9000 thanks for the reply. I do not know. I have to see what controller I have installed...
What about the main screen not in the settings? I've seen some S866 displays look different with the battery meter at the top and able to show watts/current
Mine shows watts and current. I think it is the earlier version of the display as I have had it several years.
Good morning !
I have a A26+ and I wanted to know if an improvement for the max speed?
I am currently at 35km/h and I would like to have it homologated but for that I have to reach 50km/h
Is there an improvement?
You can't go faster than 35km/h as that is the limit for the battery, controller and motor. To get 50km/h you will need at least a 52-60V battery, new controller and new motor.
Hi! I got my A20F for about 4 days now. I'm in Hybrid mode using the throttle in the third assist mode. When I'm in the second assist mode I get pedal assist until 25 km/h. Unfortunately it feels like I'm pedalling ''air'' even when I'm in 7th gear (It feels very light). I want to be able to give more power myself so the bike doesn't have to give so much motor power and let the battery drain faster.
Check my other videos where I show how to enable 5 modes for hybrid, you will have 3 assist modes and 2 electric throttle modes. Also you can upgrade the chain ring for a bigger one. You can also join the user group for more ideas and mods: facebook.com/groups/adobike01
@@TechTronic9000 Which video? Link?
have a look at this, the display is different but the settings are the same ua-cam.com/video/sY08ZB4kAZI/v-deo.html
Hi, any ideas why my milometer has stopped recording the miles properly (got the first 11 miles done and seems to have gone bad). Also, the battery seems to show low bars very quickly, say after a few miles (4m) of riding part assisted mainly and a bit of throttle and getting 1-2 bars on assist 2 and peddling ( bike is set to 36v ). Bit worrying for a longer journey if I have just got the bike and the battery is fully charged? Regards
check all the plugs and wires, check and adjust the brakes, also check tire pressure.
Also check your tire diameter. If you accidentally changed it to something ridiculously small, your odometer might not have registered enough distance yet. Just a suggestion but the values might not go that small
Hi, thanks for the video. My S866 Display does only provide programs up to P16, next it jumps back to P01. I can't access P17-P20. But I need to change the protocol (P20), because otherwise it isn't compatible to my bikes controller. Do you know what I can do to access P17-P20?
If you have 16 settings then it's a newer controller model, there is nothing to unlock. Some settings are the same for both.
From what I've read, P17 to P
20 aren't useful anyway
thx!
Please concerning P10 from what settings can you disable and enable the throttle
I will like to choose either assisted or electric
Thanks
From P10
1- PAS only
2- PAS and throttle
3- NO PAS! throttle control only
Hello, I wanted to ask you when I enter the hidden menu to increase the speed of the electric bike, what should I put in the hidden menu of P02 P03 P04 P05 P06 P07 P08 P09 P10 P11 P12 P13 P14 P15 each number of P02 P03 P04 P05 P06 P07 P08 P09 P10 P11 P12 P13 P14 P15 P16 under yours there are other numbers. What numbers should I put in for the electric bike to go at full speed? I have a 750w 48v motorcycle
It depends on your display and controller, usually P08 is the speed limit.
P08 is my favorite!
We all like the P08 :)
@@TechTronic9000 I wasn't able to go much faster after unlocking the mph to 28mph... Fastest I could do was 23mph downhill.
What level would you recommend to set on p12? My pedal assist stopped working suddenly I'm.not sure if I moved it without noticing
Check all the wires and also check the sensor to still be seated in the proper position.
@@TechTronic9000 where can I find the sensor on my bike? It's a Zip swft bike
It should be on the pedal shaft
Hello!
Can this bike be tuned?
Take this to mean that I want to include a 48V battery.
This should increase your range in pure electric mode.
At 0:44, you said that this bike knows the 48V system.
What should I pay attention to when buying a battery?
Yes this bike in particular comes with a a 36/48V compatible controller. The motor will also go fine on 48V. The performance will see a large boost in speed, acceleration and range.
Hello!
Is it possible to set the display to show the battery voltage as a percentage?
No, but you have Vol indicator for "voltage" and it's more precise.
Is it possible to make different acceleration levels on different assists levels? My bike is very powerfull on ANY pedal assists. Just few pedals rotations and the bike starts in full power. Doesn't matter which assist levels are using.
You can reduce acceleration level, it has 5 options. Also you can decrease the delay so the bike starts faster and is more consistent with your pedaling.
@@TechTronic9000 Which one for acceleration level P11 or P13? Which one for decrease the delay so the bike starts faster P14 or P16?
Your video helped
I'm glad that you have found my video useful. Thanks for watching and consider subscribing.
how do i find out how many magnets my motor has?
Get in touch with ADO.
Thenks very much 👍
You're welcome 😊
Witam mam pytanie wymieniłem teraz sterownik na nowy s866 wraz z wyświetlaczem. Niby wszystko ok ale mam problem. Podczas pedałowania prędkość na wyświetlaczu pokazuje prawidłowo ale jak przestanę pedałować jadę na manetce prędkość spada do zera co może być przyczyną miał ktoś problem taki, i 2 rzecz po zaśnięciu wyświetlacza po paru minutach kasują mi się km przejechane i od zera rusza. Dziekuje