How to use Anti Gravel, Underbody Coating (Stone Chip Spray)? - MOTIP

MOTIP Stone Chip Spray (High Solid) is a underbody coating against chippings to treat the underside and visible parts of motor vehicles. MOTIP Stone Chip Spray is recoatable with all lacquer systems and has an excellent rust prevention.
Product details:
www.motip.com/...
How to use:
BEFORE USE, CAREFULLY READ THE DIRECTIONS ON THE PACKAGING AND ACT ACCORDINGLY.
1. Remove loose old lacquer and rust and sand the surface.
2. The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 15 to 25°C.
3. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.
4. Apply the Stone Chip Spray in several layers. After drying, without sanding, re-sprayable with all lacquer systems.
5. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
6. The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

[@aai3661]

Here's a handy little trick I invented. You can spray a crap load of stone guard into a disused dish or bowl and dab a cloth into it and then touch up your stone guard by dabbing it generously onto the vehicle periodically. No screwing with tape or overspray and you can keep your stone guard in perfect order. I do that on my 2003 Honda Civic. Not a spec of rust on it anywhere.

[@inikol]

How about spraying it over some surface rust? Or better to first remove the rust?

[@CoreMaster111]

@@inikol If you want to spray it over rust then first you really need to remove any loose rust and use a rust converter to neutralize it before you paint over it.

[@User-bs8ot]

How do I remove this stuff??????

[@fl0a226]

What's the difference between the "Medium Solid" and "High Solid" version of the spray?

[@MOTIP_eu]

This has to do with the coverage you want to achieve. The high solid version is slightly thicker and therefor covers more.

[@Toastandtea682]

Can this be used as a primer so I can spray onto it

[@MOTIP_eu]

MoTip Stone Chip Spray High Solid is re-sprayable with all lacquer systems.

[@williammathias1441]

Can i spray this on my sump to protect it from stone chips and rust?

[@MOTIP_eu]

Hello William,
You do not have to use MOTIP - ANTI GRAVEL spray on a sump, simply because it is not necessary. However, should you wish to protect it, the MOTIP - ANTI GRAVEL spray can be used for this.
Kind regards,
Your MOTIP-Team

[@marbunt1974]

Can i spray it on clean alluminium boat?

[@Sunny-s1de]

@Motip does this product give the grainy finnish if you apply it on a flat (repaired) surface? (Like oem)?

[@MOTIP_eu]

It is a slightly thicker lacquer, so it does give a slight texture.

[@arnoldjobbagy1637]

My car underside painted with unknow type of body protection and now the paint is full cracked.I checked it and under the car paint is soft(like chewing gum).My plan is remove that coating and use Motip type of stone chip spray.Can I over paint this coating with car paint? I would like to prevent the cracked surface...

[@MOTIP_eu]

Hi Arnold, our anti-gravel is, once dried (120 min), re-sprayable with all lacquer systems. More can be found here: www.motip.com/en-en/automotive-products/car-body-protection/stone-chip-spray/stone-chip-spray-500-ml-high-solid. If you really need more advice please contact us here: www.motip.com/en-en/contact

[@southney7211]

Can this be sprayed over existing factory coatings. For example in the arches of a 1990 vw, will it cure on top of the original body sealant?

[@renatleongardus467]

Technically, you have to remove the old sealant. To the bear metal and use use anti-rust zinc primer and then anti- gravel

[@Florin17]

Can I spray it on a scooter plastic part?

[@MOTIP_eu]

This is possible. Please check usage instructions here: www.motip.com/en-en/automotive-products/car-body-protection/stone-chip-spray/stone-chip-spray-500-ml-high-solid

[@fxstudio6321]

I this bitumen and wax type which will be sticky?

[@MOTIP_eu]

Thank you for your comment. In general, the bitumen spray is a little drier than the wax and a little less sticky. Also, the wax always remains slightly softer than the bitumen.

[@krazedimitrov5846]

@@MOTIP_eu and this Stone Chip Spray is bitumen or rubber based ?

[@thebigcheese1889]

Does this add texture or just colour and protection?

[@MOTIP_eu]

Mostly colour and protection. However it is a slightly thicker lacquer than for example medium solid, so it does give a slight texture.

[@thebigcheese1889]

@@MOTIP_eu thanks, I found that running a small paint roller over it got the perfect texture finish for my rocker panel, worked perfect

[@brunofontinha9818]

Is it safe to use this product in the wheel arches then put a coat of the colour of the car?

[@danielfl.9347]

No

[@Lonewolf_rider]

Yes

[@jimmyrobertson6746]

Maybe

[@SoulFoodEqualsMusic]

Can you repeat the question

[@dipacalypse1092]

so this is a primer? or do i need to use a primer before i use this stuff?

[@MOTIP_eu]

The surface should be clean, dry and free of grease, before you spray. Also, remove loose old lacquer and rust and sand the surface. After drying, without sanding, re-sprayable with all lacquer systems. www.motip.com/en-en/automotive-products/car-body-protection/stone-chip-spray/stone-chip-spray-500-ml-high-solid

[@Taner-Aydın]

Bu kadar kötü spreyleme yapılır.