Dope channel ! I’m subbed and can’t wait to see the next .... your content , editing , and communication , is very detailed clean and organized , plus I was thinking about getting one of those presses for my garage myself I might add , but thx for sharing the video it’ll be very helpful to a lot of us garage guys .😃
I need to post a lot more often to get UA-cam famous, and it’s not possible as a man operation, editing videos is insane time wise… but I like the finished result 👍
After watching all youir videos in french, Im about to do it again in english just for personnal improvements, and I also think that I will never watch you in French again, there's lot a vocabulary on thesse videos, thumbs up ! Nice job Tristan !
I have a yz250 f 2001 And could not get swing arm bolt out. Having a press is great but most people cant afford or have room for one. I used a map torch and socket extension to get mine out. Heat up bolt hole for awile then hit it with extension and it should pop out did it with mine. Good luck
Oh man! Congrats for all those channels. Another French improving his technical English wording. Bravo pour tout ce boulot de montage et la clarté des tes explications ! Both channels subscribed! 👍🏻 Go On! 🤘
You are a genius bro, I wish I had a friend like you. I bought the of these recently but it isn't running. The crank would not engage,what do you think is wrong or what should I check??? Anyone's help would be appreciated greatly.
Is there a washer that goes in between the transmission and bearing? I have a 04 YZ450F and the 5th gear is skipping. Seen video where you said dont forgot this washer when you was putting a engine together once and you said that. I think it was your video lol
Getting parts for a 2001 yz250f is impossible. Trying to get parts for it in 2022 is one peice at a time no rebuild kits that would make it cheaper. So if i were you dont bother getting a 2001 or older yz250f because parts are getting limited to none existent for them what a shame sucks to be stuck with this yz250f 2001 for that reason only.
@@TristanDurandBuilds I forgot to mention that when I take the tank off..and I turn the petcock switch the gas flows out perfect…It’s just when I connect the line to the carb there’s no flow at all
@@dionbray4048 well, there is no flow if your carb float is shut… the float maybe shut because it’s seized or simply because the float bowl is already full of gas…
Dope channel ! I’m subbed and can’t wait to see the next .... your content , editing , and communication , is very detailed clean and organized , plus I was thinking about getting one of those presses for my garage myself I might add , but thx for sharing the video it’ll be very helpful to a lot of us garage guys .😃
Thanks a lot Allan, that’s the channel for garage guys 👍
This is amazing how aren’t you famous yet?!
I need to post a lot more often to get UA-cam famous, and it’s not possible as a man operation, editing videos is insane time wise… but I like the finished result 👍
After watching all youir videos in french, Im about to do it again in english just for personnal improvements, and I also think that I will never watch you in French again, there's lot a vocabulary on thesse videos, thumbs up ! Nice job Tristan !
Thanks for the comment Zachary 👍
very underrated channel you put great effort into this video and it is barely even exceeding 500 likes i subscribed enjoyed this!
Danm !!! Génial je kiffe aussi la version anglaise! Très beau travail pour les vidéos! Smart !
Thanks 👍
I have a yz250 f 2001 And could not get swing arm bolt out. Having a press is great but most people cant afford or have room for one. I used a map torch and socket extension to get mine out. Heat up bolt hole for awile then hit it with extension and it should pop out did it with mine. Good luck
Love your content you should be wayyyyyy more famous!!!!
"Wawawa-wa-wait"!!
Lol love it!!
I do too
hehehehe its common for those shafts to seize up!
Good start for this series mate! The rest is gonna be a piece of cake!
I have faith in you :D
Yes I think this was the hardest, that thing was so stuck 😮
Thanks for documenting your work!
I’m glad you appreciate that Chris 👍
Using map gas worked great for me removing my swing arm bolt on 2001 yz250f. Popain gas is not hot enough.
Oh man! Congrats for all those channels. Another French improving his technical English wording. Bravo pour tout ce boulot de montage et la clarté des tes explications ! Both channels subscribed! 👍🏻 Go On! 🤘
Thanks a lot Sylvain, et merci pour ton soutien ✌️
Je me reregarde même tes vidéos en version anglaise ! Je vais finir bilingue !😅👌
That’s exactly what’s going to end up happening 👍
mdr ,pareil 👍
You are a genius bro, I wish I had a friend like you. I bought the of these recently but it isn't running. The crank would not engage,what do you think is wrong or what should I check???
Anyone's help would be appreciated greatly.
You may have the same problem as me: bottom end bearing on the rod shot. That means taking the engine completely apart 🔧
Tristan bought a bearing press finally whoop whoop
I did 👍
On Black Friday (it’s been sitting in it’s box since 😅)
I love the videos but I think a little less music and more information would be better
Where is the best place to order a 250 Yamaha YZf engine head
I’m not sure but you should definitely look at eBay and if you absolutely want new I would check partzilla 👍
Is there a washer that goes in between the transmission and bearing? I have a 04 YZ450F and the 5th gear is skipping. Seen video where you said dont forgot this washer when you was putting a engine together once and you said that. I think it was your video lol
Must not that expensive.Crankshaft and piston.And refining the cylinderwalls.Good work.Which state you live in?
You can see on the video I bought more than just a piston and crankshaft... 😅
I'm in NY ✌️
Pediste un quit para una del 2014 para ariva ??
🤷🏻♂️
That crank wtf it been butchered have faith in you Tristan
Yes that bike was really nicely put together 😅
How much do you think the engine weighed?
A dirt bike engine isn’t that heavy, I would say less than 100lb
very good crankshaft , bent? explain why .................thank you
HI 👋
I talk about it in the video, I show the broken bearing 👍
Oh my dude, buy a tusk case splitter / crank installer. It will change your life.
Where u live ??
He lives in New York
@@GOON4GOD_OO na already sold the bike
Getting parts for a 2001 yz250f is impossible. Trying to get parts for it in 2022 is one peice at a time no rebuild kits that would make it cheaper. So if i were you dont bother getting a 2001 or older yz250f because parts are getting limited to none existent for them what a shame sucks to be stuck with this yz250f 2001 for that reason only.
Do anybody know..
When I turn my petcock switch on, don’t no gas flow down to my carb
Sounds like your petcock is clogged by debris.
Remove the tank, take the petcock off, clean the tank with hot water, put a new petcock in.
@@TristanDurandBuilds Thank you for the help
@@TristanDurandBuilds I forgot to mention that when I take the tank off..and I turn the petcock switch the gas flows out perfect…It’s just when I connect the line to the carb there’s no flow at all
@@dionbray4048 well, there is no flow if your carb float is shut… the float maybe shut because it’s seized or simply because the float bowl is already full of gas…
@@TristanDurandBuilds thanks again
super crunchy ? my bad
Super crunchy indeed 😨
Mais pour cois tu le fait en francais
🤷🏻♂️
Nice vid, except for the horrible music...
Apparently it’s hard to make everybody happy 😅
Ой-ёй-ёй. Ты русский что-ли?
Are you gonna spend 5k on it then sell it for 3k ?