Friend thank you for sharing your video, I bought a HW 80 stock full size full power in 22 here in Iran with no power limit and can't imagine having it in Sub 12😢
Seems like shims between scope and mounts would help. I used photo negative material for this. Centralise adjusters on the scope turrets, shim it and get it close to zero first.
Thanks, shoots nice with the 97 spring. No idea why the scope has now run out of adjustment and POI is well off from the POA? I did look at the shims and it's straight and even? Stuck a cheap red dot and a few twists of the knobs it's almost on target?!
Have you tried an ox maximiser kit if they still make them they always used to work well on HW80s with consistant power as for the scope issue as it's shooting high try some insulation tape in the bottom of the front mount first although it did look like you could do with some higher mounts as the objective lens looks very close to the cylinder nice vid though fella hope you have some luck great guns are the weihrachs 👍👍
I have an old Ox spring that could always play with. Touch wood power and cocking effort is pretty good with the HW97 main spring. I need to play with the scope as no idea why it's suddenly off so much?!
Have you seen the latest weirhauch piston seals? They are worse than the older ones like you have in the video, they are absolute shit! Very hard material and comes with blemishes and indents from the molding process
I have seen on the forums and such that the quality is shoddy now? Can only assume a bad batch and not poor QC. I've previously bought seals and not entirely sure they've held up too good when I've stripped the rifle down later on?! These Brit Seals are a definite upgrade on the stock ones available. I've got some for the other rifles too when needed
Friend thank you for sharing your video, I bought a HW 80 stock full size full power in 22 here in Iran with no power limit and can't imagine having it in Sub 12😢
It's not too bad, can still reach out to 50m with relative ease, plus it's not too hard or stiff to cock.
The European limits are even worse!
Seems like shims between scope and mounts would help. I used photo negative material for this. Centralise adjusters on the scope turrets, shim it and get it close to zero first.
Christ you must be old like me , works a treat 👍🍻
@@manofkentcatapultsgunsando5069 Yup, reckon so!
It was fine before so no idea what I've done? Could be the punch bolts tighter one side and a bit of barrel droop with the new barrel who knows??
Nice work and love the lead toadstools😅
Nice you got the 80 working mate 😁👍
Thanks, shoots nice with the 97 spring.
No idea why the scope has now run out of adjustment and POI is well off from the POA? I did look at the shims and it's straight and even? Stuck a cheap red dot and a few twists of the knobs it's almost on target?!
Have you tried an ox maximiser kit if they still make them they always used to work well on HW80s with consistant power as for the scope issue as it's shooting high try some insulation tape in the bottom of the front mount first although it did look like you could do with some higher mounts as the objective lens looks very close to the cylinder nice vid though fella hope you have some luck great guns are the weihrachs 👍👍
I have an old Ox spring that could always play with.
Touch wood power and cocking effort is pretty good with the HW97 main spring.
I need to play with the scope as no idea why it's suddenly off so much?!
Have you seen the latest weirhauch piston seals? They are worse than the older ones like you have in the video, they are absolute shit! Very hard material and comes with blemishes and indents from the molding process
I have seen on the forums and such that the quality is shoddy now? Can only assume a bad batch and not poor QC.
I've previously bought seals and not entirely sure they've held up too good when I've stripped the rifle down later on?!
These Brit Seals are a definite upgrade on the stock ones available. I've got some for the other rifles too when needed