If I could give you more than 1 like for this video I would! Thank you for a wonderfully detailed video and helping me with my supercharged 1990 Miata!
Will the Speeduino work with the Chevy LS style V8 engines? Like say a genIII 5.3l out of a 2000-2007 Silverado? Or what about a genIV out of an 07-2012 silverado? Does this work to control the electronic trans as well? Or will it interface to the GM Trans Control Module?
I am doing acceptance testing on an NO2C I built, I am pumping 1,000 rpm into it using ardustim, should i be seeing the 4 led's flashing, or must I have injectors and sparks attached to the NO2C before they will function ?
hey man, not sure if you're still replying to comments, but I got up to the step where you upload on SpeedyLoader, but for me it just says "Access is Denied." and refuses to upload. How can I get past this?
i don't know what i did wrong, but i followed both methods and i can't connect the studio tuner to my ecu. i even bought another speeduino board just in case my board is bad. your video is extremely easy, but something is wrong. any other suggestion to help me out???
When getting to the portion of loading the "speeduino base tune" it does not give me the "power cycle" im not sure whats going on here but in the bottom right side it says i have the "speeduino base tune.msp" there then trying to start i dont even get the fuel pump to prime any tips on whats going on here?
With the core4 it says it already has a base map loaded for my car dose this mean i only need to download the driver and tuner studio and just plug it in.
Anyone running the speedy efi fishdog for 99-00 miatas? I get money tomorrow and want to get it but there's no reviews on the website and forums are scarce.
![Getting Started with a Speeduino ECU | Beginner's Guide | [Hardware]](http://i.ytimg.com/vi/9OhMNd45B9Y/mqdefault.jpg)
this is what we need. Keep it up.
sure thing
I was looking for a long time a complete guide videos for speeduino. Congrats from Greece!!!
Very concise and accurate video, a rarity these days.
Good simple explanation James
Thank you for your knowledge! Extremely grateful for the contributions !!
Perfect, got it running hopefully now time to order one of your test boards 👌👍
This helped me tons. I'm now up and running. Thanks for this video.
If I could give you more than 1 like for this video I would! Thank you for a wonderfully detailed video and helping me with my supercharged 1990 Miata!
Great video James, well laid out. Looking forward to more content 👌🏻
James, I've just bought your Speedstim and I'm not sure how you wire it up, the promised video would be a great help!
Great content, looking forward to the next video!
Great video.Keep up the good work.
Man awesome video! Thank you for the excellent tutorial!
louder audio please...
Great Job!!! Keep it up!!!
Very concise layout in your explanation, well done
Awesome! Nice work! Thank you!
Great video 👍🏻
Damn you make it look so easy bro going to try it on a 7m Toyota! I guess I can get a base map that's close?
Will the Speeduino work with the Chevy LS style V8 engines? Like say a genIII 5.3l out of a 2000-2007 Silverado? Or what about a genIV out of an 07-2012 silverado?
Does this work to control the electronic trans as well? Or will it interface to the GM Trans Control Module?
Thanks for your help
Hi James, fscinating and well laid out video, do you have any information about using a speeduino on an air cooled V twin motorcycle engine please.
Super clear, super useful, cheers.
More videos please
specially hardware
waiting to see SpeedySim video
I am doing acceptance testing on an NO2C I built, I am pumping 1,000 rpm into it using ardustim, should i be seeing the 4 led's flashing, or must I have injectors and sparks attached to the NO2C before they will function ?
my core4 speeduino when plugged in comes up under device manager but doesn’t allocate itself to a com port? any suggestions
how do i connect one of these to my is300 auto? are they only for manuals?
Great video thanks.
I’m having such a hard time getting my ecu to connect to my computer please help! Everything you did I did and it’s not working for me
hey man, not sure if you're still replying to comments, but I got up to the step where you upload on SpeedyLoader, but for me it just says "Access is Denied." and refuses to upload. How can I get past this?
there's a guide on mac?
can i make this for the motorcycle too?
Wiring arduino nano ke mega nya gmn om?
Pin mn yg dipake?
Simples!
Hi. Is there knock sensor input? It need a madule? Is there a cheap way to have the knock sensor module?
i recently bought a complete set from diyefi, they delivered it with a usb connector instead of a serial port connector, now i cant do anything
i do all of this but even after selecting mx5 pnp board i still cannot get anythign to work
Im filling the contract form and it’s not working do you have a email address
Many thanks Dylan
i don't know what i did wrong, but i followed both methods and i can't connect the studio tuner to my ecu. i even bought another speeduino board just in case my board is bad. your video is extremely easy, but something is wrong. any other suggestion to help me out???
When getting to the portion of loading the "speeduino base tune" it does not give me the "power cycle" im not sure whats going on here but in the bottom right side it says i have the "speeduino base tune.msp" there then trying to start i dont even get the fuel pump to prime any tips on whats going on here?
I am having trouble finding a grey camlock adapter for my speeduino on my 95 impreza. Any idea where I can get one?
My car wont start with the basemap any idea what could be wrong?
With the core4 it says it already has a base map loaded for my car dose this mean i only need to download the driver and tuner studio and just plug it in.
If I wanted to use this in something other then a miata or bmw, would I be able to? Specifically a Hyundai genesis sedan.
Can we use it for single cylinder motorcycle engines with above 13k rpm
I got problem with upload firmware. Its failed
Wow, 5 dislikes.
Probably the same 5 same people that cannot find email on their flip phones .
Anyone running the speedy efi fishdog for 99-00 miatas? I get money tomorrow and want to get it but there's no reviews on the website and forums are scarce.
Can I use speeduino on a 6 cylinder ?
13b Rotary support?
Show us some locked timing video. Speeduino junk.