Building the Speeduino Standalone ECU - Against the Clock
Вставка
- Опубліковано 1 чер 2024
- I build a Speeduino standalone ECU from scratch, configure it and run my car with it! All against the clock!
The Speeduino is THE best value standalone out there and it's the cheapest way to get into tuning your own car!
Chapters
0:00 Intro
1:55 Assembly
5:05 Loading the firmware
8:32 Configuring the Speeduino Board
10:51 Configuring the Firmware
13:27 Wiring the Board in
14:20 Running the Car
17:00 Summary
Links
speeduino.com/home/
www.megamanual.com/MSFAQ.htm - Наука та технологія
As a fellow car enthusiast (on a budget) and IT guy, this is exactly what I want. I do a lot of tinkering with SBC's, mainly Raspberry Pi's, and your previous video pointed me in the direction of Speeduino and I'm already planning my build. Better yet, being Australian, it's local for me too!
For me, it’s a massive bonus that not only is it cheap but it’s also something to play with and potentially change to better suit my build...
I just received my Speeduino board, now I just need to order up the parts to populate it. Thanks for posting this one.
I ordered my parts from Digikey.... came within a couple of days, clearly labelled and the cheapest option 👍👍
I have been wanting to build a stand alone ecu for years now. I have experience with arduino and soldering. Thank you for making the videos. Information like this helps make it easier to get into a project like this.
If you have experience with soldering projects you’ll fly through this! Best of luck 👍
AS someone who has been soldering his whole life and has built several megasquirts id like to pass on that once you finish soldering your board, use a paint brush cleaner to clean the rubbish and flux off the board, then rinse it with clean water and use a hair dryer to dry it out.
Then use a good PCB laquer to seal it and prevent it from corroding, many people dont do these things and wonder why they ahve random shorts or faults that start to happen a few months down the track...
Hope this helps.
@@Mike-ry4ti great point Mike, another point which to be fair the MS does have over my board is the MOSFETs are all supported. This is more of a v0.3 problem as there are many Speeduinos which are…
Amazing to see more love for the speeduino project. There are many variants of Speeduino Compatible ECU's also. Josh allowing this to be an open source project has empowered some of us to make our own. For me it started as refining the project for my own car. This gained traction and I now design and sell my own Speeduino Compatible variants.
Just had a look at your store, looks really good! Yeah, I think Josh is a modern day saint, the amount of hours he must’ve sunk into this he’d be well justified wanting to keep it closer to his chest!
Yeah, people seem to love the idea and the best thing is the people who always wanted to do this but lacked the money or technical skills to do it themselves now can get tuning... I had to shout about it!
This is a complete game changer for engines like the 1ZZ, which had previously not been economically viable to tune, thanks to the exorbitant price of standalone ECU's, as you could just do a 2ZZ swap for the same money. But now good 2ZZ's are getting thin on the ground, and you can get 3 or 4 1ZZ's for the same price.. well, this just opens them up to all sorts of modifications. Hayabusa throttle bodies, and forced induction spring instantly to mind. Bloody marvelous :-)
Pinned comment!!! Absolutely, using bike ITBs and a Speeduino makes what was (and still is) a £2k project is now a £300 project. If I had to do things “properly” I couldn’t afford to do it at all!
This is the most well presented speeduino channel I’ve run across! I subscribed after your last video and I’ll probably get a speeduino because of you! Thank you for putting these videos together and I hope your having a good one.
Glad you enjoyed it. If you have got a Speedy then that’s mission complete for me! But stick around as there is plenty coming that will interest you !!
@@MakingforMotorsport Hello sir, I want to communicate with you about building a custom ECU for a hydrogen combustion engine. I will give you everything you want, but I want to communicate with you about the project
Thank you so much for introducing this ecu to me, I am working on boosting a 08 scion tc right now and this ecu has solved my issue with not wanting to spend 1k or more on another standalone and it makes this dream now possible for me. This was my first car and decided I wanted to keep and have the best time I could with it.
What it’s all about! Power 🏎🏎🏎 to the people!
just sorted out getting my speeduino dropbear because of all these videos, currently getting reliability on my 1987 205gti with a big spec and swapping twin 45s to throttle bodies.
I'm one of those who subscribed with last video. Definitely a great concept for a channel and one that has already carved its own niche
Cheers buddy, glad your enjoying it and the niche seems to have hit the spot. Personally I can't wait to get abit more Motorsport on here! Its coming!
I'm overwhelmed by this whole thing but this is the only way for the car I have without spending more than I bought the car for so I'd appreciate all the help
Tuning on a budget can be the best way, as long as you are willing to learn you’ll be fine! 👍
The timing for this video could not have been better! Awesome job!
Cheers! glad you enjoyed it!
Just discovered this channel and definitely impressed by the amount of detail and ease of information.
This is a huge step for the open source community
Personally I think it’s great there are people out there willing to pour their heart and soul into these projects who then effectively “give it away”, it’s not quite like that but still amazing!
A budget standalone ecu is the holy grail!
The future is NOW!
Currently my favourite new channel. Really enjoy the presentation style, all the info is there, good sense of humour. What's not to love?
I'm glad I found your channel I build a megasquirt years ago, and now I just try to build data loggers for automotive off and on when I can figure stuff out, it's really cool to see this stuff is even more popular now and I'm hoping to put one of these together I got a couple engines I could run this with
Fantastic content, please keep making videos as well presented and info dense as this 🙏 you’re a great value to the community and myself
THANK YOU SO MUCH FOR THIS I REALLY APPRECIATE THE KNOWLEDGE. EXCITED TO START MY SPEEDUINO BUILD FOR MY 22RE!
Looking forward to using some of these in the future with a Teensy 4.1 for various engines.
Super excited to make use of this on one of my projects! I can't wait to see where this channel goes, especially keen to see how those itbs pan out
The ITBs are the next video... they are doing well so far! Glad you found it interesting... you’ve gotta get playing!
About the scariest thing about my build is definitely the wiring. I've never built a chassis harness or engine harness before. This is actually the ECU I got for my car about 6 months ago. I'm glad to see that someone else has done this. Makes it a tad less scary
chassis harness is simple. you should be able to re pin all of the factory harness to run on one of these things.
I'm running a speeduino n02c board on my turbo mx5. Great ecu. Has all the features I need for a turbo road car.
Curious to see someone running a rotary on one of these.
Here’s someone..... ua-cam.com/video/l_EIRGyNyfU/v-deo.html
watched your video, and i made my choice to go for speeduino. was thinking to build it this winter!
Good stuff, I've been looking at these to put on my Daihatsu hijet.
This is the best thing i have ever seen. will be building one for my turbo d16 project.
Just about to embark on a V6 speeduino build, thanks for the videos, perfect timing!
Glad it’s a help!
You should try : 1 conformal coating 2. Solder the Arduino Mega directly to the main board 3. Design & 3dprint an enclosure for your hardware with gasket, proper mounting of the connectors on the enclosure even have your own logo on the case
:D Watching this video in Sept 2022, and now at 25K subscribers. Really enjoy your stuff.
This channel is definitely one of my favourites, cant wait for the next video to come out :)
I like it too! 😂. Next one is already started 👍
I've been waiting for someone to vouch for speeduino. This is the push i need. cheers!
Good man, do your homework (and RTFM!) and you won’t regret it! 👍
Thanks. I'm going to try this for my aw11 turbo project.
I've absolutely no use for this, but I'm now gonna have to get something to use this on.
Really great, well put together video.
I'm sure this channel will go far, new subs and views coming dude 👍
Cheers buddy! Good to know people are enjoying it!
I'm only the first four minutes into this, but I'm delighted to hear it's based off the old megasquirt project.
I built a mega squirt, and a test thing for it and everything else and really wanted to use it but... This was early 2000s and it turned out that modifying my engine versus putting in that brand new LS1 motor was the same price, and I dropped that in instead, using the factory ECU and harness.
So I never ran my mega squirt on anything but I've always wanted to add fuel injection to all kinds of small engines and I do a lot of Arduino projects so this is just awesome.
Looking at this about the only thing I want to change is to get rid of the Arduino and just SMC solder on the processor and everything so it's just one board but... I get it is what it is. Definitely something cool and worth looking into
Great video !! cool to see a complete process of the build and testing of the speeduino.
I did notice that you had cooling on the IGT - FET i bellive it's cald units in your old ecu and not the new one.
Cheers bud! I didn’t add the coolers as they aren’t part of the BOM so I didn’t buy ‘em and they were only on my 1st as a best practice. If (more like when!) this other Speedy goes in a car I will add them...
keeping hydrated , love it also having a can watching this too. super interesting mate fair play top work.
Gotta stay hydrated!!! Safety first!
Nicely done, will definitely keep an eye on this for my future projects.
Oh it’s a great piece of kit, keep it mind!
Awesome job. I just got my Speeduino set up to function on a bench display. I will be using it to show students how an ECU works and hopefully used on our test mule engine on a dynamometer. The actual display needs to be built next. Great inspiration this video.
That sounds like a really fun setup... lucky students!
just came across this channel having been given a mk7 1.25cc fiesta from my mum and wanting to fettle with it...its fantastic, keep it up👍👍
Stay tuned, hopefully more in the works!
Super helpful finding your channel! I'm building a motorcycle and fuel injecting a currently carbureted engine. I've got a lot to learn, but I'm enjoying learning a new skill. Subbed! And thanks for sharing.
It’s always great cracking into something new… as long as you don’t need it to get to work in the morning 😂
Love your videos mate! Just want to more of them 🙂
Well Thank you, That gave me enough confidence to build one for my cafe racer project cheers
Thanks for the video I just subbed. Always wanted to put my own ecu together.
Excellent video, very informative. A lot of food for thought. Currently working on a stroked Bmw M42 and want to fit throttle bodies so this is a revelation. Thanks!
awww man, I had an old E30 318iS and I loved the M42, the stroked version (2.1 with the diesel crank?) always gets my attention... that'd be a great engine....
@@MakingforMotorsport Hopefully it won’t go BANG although I’ll be having a lot of fun if and when it does 😉😂
Great stuff, thanks! 👍
Great vid encouarages me more to get the speeduino when the project car is to that stage and being able to run it o better potential than the stock ecu. This is great motivation to keep learning.
Cheers buddy! Always plenty to learn...
Getting me liking the Speedy more and more , I used to built mini quads and their boards are tiny (12mm x 12mm) , soldering will be a pinch with this 👍 . Great vid too
It’s easy for me so you should fly! Enjoy! 👍
Super video. Great series overall, really.
I'm wanting to convert a carburated motorcycle to EFI soon. My biggest hang-up is the mapping process. Wiring, placement of sensors and ECU are issues that I can see popping up as well, but to me those are easy in comparison.
Thanks buddy, great to know it’s helping. I am just editing the final ITB video and without joking, the car started and ran fairly well with the standard base tune... it’ll be out in a few days but trust me, it’s not as complicated as you think..... 👍
Definitely thinking about using this for my L28 Datsun build. Get the E back into it!
I ‘liked’ this video the moment you advised me to “stay hydrated”! 👏
It’s important health and safety information… I always worry about dehydration, easily on Friday and Saturdays! 👍
As someone who uses linux and hates how every software is made for windows i really love speeduino. now i can tune without worrying about what happens with my data.
Very encouraging. I'm gonna tackle my K24 😃 soon!
Excellent… I have one of those big Hondas on my want list… torque talks!
Did you do it? I have a K24RBB in an '04 SI & need an ECU that can handle both cams. Did you find base settings somewhere or just work out your own?
Holy Crap!!! Ever since I first got into MCU's, with the TI Launchpad, and subsequently Arduino and RPI, I always wondered if it was possible to make an ECU with them, Arduino seemed like the most fitting. I thought they would not be fast or reliable enough for it... This is the first time I've heard of it actually being built!
They work well for me! It’s a great solution. Also, from the comments 99% of people who have one are happy as Larry with it, the only moaners are people who don’t think it will work and think they know better! Get one, you won’t regret it! (Not a guarantee 😂)
I mean it's way more powerful than the ecus in cars 20 years ago haha
There is no need to ask, already liked, subscribed and hit the bell icon.
Btw, I'm reading the manual.
Keep up those amazing videos!
👍👍👍
Initially I was going to fit some throttle bodies from a zx6r to my 1982 kz1100. After some thinking and the accidental acquisition of a turbo, I’m leaning towards using a single throttle body, thinking the inlet size matched to the compressor size. I’m not 100% on the wiring or programming but I figure I’ll just take it 1 step at a time.
Love the video, the content, the algorithm, the everything.
Cheers bud! Glad you enjoyed it!
Im excited for this. I talked to a friend a long time ago about using a raspberry pi, recycled dell optiplexes, and a 3d printed case to make cheap standalone APUs for cars and custom vehicles in general. We also talked about a scan tool that invades a ecu or tcu to monitor and download as much info from a stock unit that would be needed to allow a program to recreate it and upload it to your custom unit. This would allow for true freedom when doing cool builds. Allowing someone to cheaply swap a 6 speed auto into a car that originally came with a 5 speed auto. Has something like that popped up in the market yet? I know nissan was working on a diag tool that did something similar but i left the company that was working with them so im out of the loop now.
There are plenty of canBus sniffers so working out comms between modules and OBD2 let’s you pull parameters like load and spark advance so it’s easy to rebuild mapping tables…
It’s a brave new world people!
I was aware of speedino but haven't seen many videos on it but it is definitely cool
I have a couple of Motorhomes, both near the same YM, one is powered by a 350 and the other is as far as I can tell, a 427 industrial or truck version, both Chevy engines both are running Qjets at the moment. Ok so I have a 3rd BBC which I have dumped a $^*t load of money in and still have to dump more into it, it's a 540 which will be a race rig if I live long enough. Anyhow, for the 540 project, I dumped another load of funds into a MS3X with everything needed to run 2 stage fuel and 2 stage N20. COP, SFPI, dual knock sense, RTCC, 2 low impedence injector driver boards, a GPIO for controlling a 4L80E, there's absolutely NO room left in the case for anything else even if DIY made anything else that could be installed. So now I have to spend more for the full version, not a problem, I expected that. Then there is the MSQ file that must be developed, that's a problem for me at this time, I'm going to need some serious support for that. Again, anyhow, I knew a little ( very little and still very little) about Speeduino before starting the MS3X system and now I want to have a go at this to convert both or at least the BBC powered Motorhome first. IMOP I'm thinking this would be a good deal for either engine. Any opinions to offer from anyone?
5:20 the clock crystal you are referring to is used by usb to ttl chip on board. Arduino mega chip crystal oscillator is located just very near the atmega chip surrounded by 2 little capacitor and very small in size. Bdw very nice project.
Yeah, there’s a few people have pointed that out, my ignorance I suppose, every days a school day! But the point still stands as these are trickier to connect and use as a Speeduino...
ordered mine a week ago because of you
just takes a bit to ship to germany ^^
great video
Good man! I wish you viel gluck! 👍
@@MakingforMotorsport Thank you
I‘m assembling it right now :)
This eventually will be our only option, since the EPA is making it illegal for companies to sell stand alone ECUs and piggyback ones, we will have to make our on, so the earlier you hop on this wagon, the better off you will be, thanks for sharing bro
Yeah I heard about the EPA vs RPM, i don’t get it, seems strange that the home of hot rods wants to stop a tiny minority modifying their cars… I don’t get it 🤷♂️🤯
Congrats. Very good video in every aspect! For me personaly the only things worries me is the wiring of ecu with engine harness and the base map!!!
The key with the wiring is just get as much knowledge as possible on your current car, and the base tune isn’t that hard, there are several table generators and rules of thumb for advance, these will never be “right” but they can certainly get you running...
Excellent video very informative.
Thanks buddy!
Lovely video
I have enjoyed your video quite a lot, your presentation method is entertaining and the information you present is quite accurate for the most part! There's two things that aren't quite it. Early in the video you talked about the different mega2560 board versions and their clock crystals, these clock crystals are for the serial chip, not for the mega, the one with a 12mhz is a ch340g and can be used just fine. The mega with a 16mhz big crystal has an atmega16u2 as it's uart chip and is generally recommended because you can flash a custom firmware on it to make reset behavior more suitable for a car ecu. Both the ch340g and 16u2 equipped boards run at full 16mhz. On my Samurai project I've had issues with random resets caused by voltage spikes which was solved by removing a capacitor that was there to let the ch340 reset the mega. Another thing, you forgot to mention that people should load the speeduino base tune so that all the properties have some sort of a value to prevent any unexpected problems because someone left a cell at -255. Otherwise great work and I'm looking forward to seeing your next video!
Thanks! I am enjoying making them! Yeah, a few people have picked up on the Crystal comment, my ignorance but the advice is still the same, get a decent one. The basetune I’ll be picking up in the final ITB vids when I’m talking about tuning!
Excellent video 👍 well done
Cheers! Glad you’re enjoying it!
Thanks for this, I've been thinking about getting one of these to build a turbo dirtbike for the LOLs haha.
Great idea!!! Everything needs a turbo! 👍
Great video!
Cheers Zach! 👍
Excellent, thanks👍👍
underrated channel
Subscribing straight away! Thanks Mate.
Thanks! Glad you enjoyed it!
I have a Speeduino ECU that I will be putting in a Honda Civic ECU case for a auto trans. I will be using the OEM harness on my 97 Honda Civic Coupe manual with the plug for the trans control being used for my waste gate control solenoids and more.
One other thing I thought about is what is being said about the 12mHz crystal. I know from past experience ATmega chips have been over clocked to 20mHz for certain projects. If in this case 12 is a bit slow, and 16 works better, what would wrong with going to 20mHz.
Great Chanel!!!
All of the above. I’m an IT guy but I need to google what is still needed in a car where you upgrade to an aftermarket ECU but retain the stock cluster and heating controls etc. I’m basically planning to go ITB’s on my 1uz SC400.
That cheap one is completely fine. That 12mHz osc is for the ch340g USB chip. The actual XTAL for the 2560 is pins 33 34 and uses a much smaller footprint osc.
Yeah thanks, I realise that now 🤦♂️ but I do like the Elegoo ones… it might be totally wrong but they just “feel better.”
@@MakingforMotorsport For the most part they are pretty much the same. PCB tech is pretty good now and affordable. They all usually use the same suppliers so the components inside are the same. There might be variations in the layout, but not big ones that will effect anything.
Great Work
Thank you! Cheers!
Brilliant! Appreciate you taking the time to document. I’m going to go this route over MS as it’s cheaper and Arduino dev is something I am already comfortable with. Question - do you have an STL file for the 3D printed enclosure or did you find it online? Thanks again!
It’s not 3D printed, it pre-dates my printer but it’s a fairly standard ABS project box.... when this spare Speeduino gets installed in something, it’ll have a printed enclosure but I don’t have the designs yet!
@@MakingforMotorsport Thanks! Probably a pretty specific design for the car in any case. If I go this route I’ll post one. Appreciate it.
Ok.. you have a new sub...
I have a 600hp 2l sti that I use for mostly track days and a bit of town.. I'm going to give it a go..
Cheers mate
Thanks for the sub, 600? I bet that shuffles along! I drove a 400hp sti blobeye... that was no slouch!
@@MakingforMotorsport all good mate..
Lol.. its a bit stupid around town, the engine is built for more but I'm limited buy the ecu. I'm using the rom raider software and have reached the limit of what it can safely do. I was going for a link but this is a welcome new option.
Cheers
Great vid, I hope to use this on my LS Volvo 240 swap
LS swap!!! Is there any car they don’t fit?? Best of luck with it! 👍
This is brilliant
Cheers Steve! That’s what I thought 😂… but honestly glad you found it useful…
I am super interested in setting one of these up to run an Chevy 305 TPI engine in my 91 Camaro
Trying to put together all the info before I dive in though.
Great video, Thank you.
I subbed last time.
Thanks for the sub and continuing to watch! You’re absolutely right doing all the research up front, I feel like I have been researching for these kinds of projects my entire life!😂
@@MakingforMotorsport for sure, I have raced a variety of cars and theres so many nuances to each
I am an ' old school racer ' brought up with Hilborn constant flow fuel injection, and multiple side draft carb configurations. Now I have more time to fiddle around with a project car, an EMS is the way to go
Power comes from the cylinder head ( of which I have modified a lot ) and ignition timing.
I have collected all the parts for a hack on the GM Aussie VN ECU ( look up PCM hack )
but your EMS seems so simple. Can you program on the fly, and how many boxes in the ignition table ...ta
It is simple, honestly, I am not conning anyone, just need injectors that fit and an ignition amp that works for with either 12v or a crank pulley and you’re off! Power does come for the head but spark and squirt always help
Could you please breakdown the process of creating a wiring loom for running itb’s with a speeduino?
I saw your first video and went to order one but there's so many different versions and different types, could you please do a video on how to choose the right one? Also I still don't understand the arduino part is it something you order separately and is there different types of that too? Thanks!!
Itb BRRRRRAAAP got you my sub...now i need some version of cf filament.
But thanks for the videos!
Thanks for the sub! BRRARRRP indeed!!!!
I think you know quite a bit about the port air module delivering fuel loads based on constants. That's why you weren't saturated with the incoming MAF temp. I would like to know more about how with the engine hood closed air temp provides a more accurate fuel flow. Cool fuel air is always the best input. I really like the viability of taking a scratch board and making the interface better than the 90's. I wanted to build my own ECU once I understood that changing chips on an older model board cost me a lot of time based on recorded data. I would rather adjust everything then and there aside from a non-it-drive me home burn rate. I'd want to commandeer a carb built in and branch it to multi-port and when no chugga chugga I know that a carb could bypass the gross negligence that I did on my own.
Cheers bud! Always learning!
Thanks very good video
Cheers bud! 👍
Any updates to this project? Personally, I'd like to know more about potential logic-board swaps for the UA4C (EG: Mega=>Teensy or Mega=>ShieldBuddy, etc).
very well explained. So after someone stole the ecu and its connectors from my car this would be a good and cheap option considering the prices of the original ecu ... my question is, would it be feasible to make it for a v6 engine with 4x4 automatic transmission ?..It has been a headache looking for the original parts of an already rare vehicle in its variant only made for Latin America
(it's a 2008 Suzuki grand vitara)
The V6 is feasible but the auto-trans will have integration and being 2008 I would guess there will definitely be canBus integration…
Whilst not impossible I’d say using a Speeduino without the standard ECU to go from will be much more of a hassle than finding another OEM part… I could be wrong, just my opinion…
There may well be another aftermarket solution which is easier than Speeduino, but it won’t be just plug in and play…
fantabulous, I will have a new project to do.
And the best bit about tuning a car is there is always something to play with!
Really enjoy your channel - would love to try speeduino but need drive by wire, seen a few people achieving this…but they tend to be evasive how it’s done! Any idea how this is being achieved? - and thanks to your ITB film I now own an Ender 3 - keep up the great work fella.
Cheers buddy! Drive by wire, well it's like you've seen my planned video list! My pedal movement is waaay too short with the ITBs... so do I mod the pedal, do a mechanical lever exchange OR full drive by wire with maps???? 🤔🤔🤔
Speeduino does not and will not support DBW.
An external controller will be needed.
Hi. Great video. Thanks. Could you tell me the details of the soldering station you are using please? Cheers, Grant
Hi, I'm using a "Lonove 926" which I got from Amazon, I like but another commenter said they had it and it f$%ked up on them...
Thank you!!
You're welcome!
Came across this great video, whilst trying to find information on adding a Speeduino to a Classic Mini Engine. Watch your previous video but did not realise you were a Mini enthusiast :-) Not many videos around on this, so thanks. I'm a complete beginner (first engine build) so will need to do lots of learning. Starting off with a non boosted engine running a HIF44, then once run in I'll be slapping on a Weber DCOE45, then once I have it sorted out probably switching to a Supercharger with the Weber. Wasted Spark ignition not EFI, thought I could do this with CPS and MAP only to start with?
You can run wasted spark on a 3D management with just Crank and Map using SpeedDensity mode, just ignore the fueling part. I did the same on my car for years.
It’s only when you bring fuel in do you need the other sensors like Coolant, IAT, TPS etc…
Best of luck! 👍
I never smoke kids. They make far too much noise when you try to light them.
That said, I love this channel. It has a nice bit of Bad Obsession Motorsport to it, with less brackets.
😂 Thank you very much! To be mentioned in the same breath as those crazy geniuses is high praise! (I'm less into the brackets... but I definitely have more than one grinder!)
Stella is a excellent choise 8)
Your channel is very good, do you have any pinout or tutorial to be able to control 6 injectors, for a Mercedes 300E, thank you
1:10 in I'd like to say you're welcome, and don't think we didn't notice you trying to be more natty for your larger audience. Naturally I went back and watched the rest of the videos and it's funny what a tiny bit of editing produces. Good on ya mate👍🏼 cheers from the states.
P.s. Bruv, get a proper ale. Boddington's is my English preference (regardless of the Newcastle river Thames bridge I have tattooed on my back)
Tiny bit of editing? I feel like I spend my life in front of editing software!!! 😂😂😂 But apparently changing the shot every 10secs means people like it more! Cheers 👍