I droped in a k&n filter and also drilled out the front grill holes. It made a difference in iat’s both in traffic and cruising and no water issues at all. My car is daily driving and been driven thru some good rain storms and not a single issue with water getting into the inlet.
Alex thanks as always. Big thumbs up what I have learned with my 18 Whipple is not to stomp it when IAT's are high. I have the stock Whipple CAI open system. It is open at the top and the bottom. Plus holes around the tube, lots of heat entrainment possible. I took my hoodliner off and am working on modifying my cooling vents in the hood and the rear hoodseal to try and get the heat out and cooler air in.. without changing out the entire Cai for a lided unit. If you get fired Cletus is looking for a canyon car tuner. Just got to make it fly..
Thumbs up simply for a solid video description lmao. Thanks for the info tho! I have longtubes and Lund flex fuel, stock intake. Tbh IAT temps always are within 10 degrees of ambient, everyone always asks why I don’t have a CAI, simply don’t need it. 🤷🏼♂️
Best CAI to stay close to stock and get slightly more air is the Injen Evolution. I used it when I had my 2016 GT and loved it. With just the intake and a tune I ran 412 HP and 387 TQ to wheels. Those where literally the only mods I had. Not much of the increase was from the intake as usual but the intake temperatures were 3-4 degrees above ambient with the Injen and 5-7 with stock while moving. They would creep up when in traffic but nothing like my GT350 does. I hit 151 degrees today with an ambient temperature of 82 degrees at idle. That’s what happens with open element intakes. And I’ve never seen anything less than 5 degrees above ambient in the 350 except in a cold winter morning with temperatures around 30 degrees
Great video, been going back and forth weather to get a CAI or not on my 2020 GT, all I have is a SR X-pipe. Will be getting a tune in the next month or so
This video would have saved me a headache of trying a cold Air. Dealing with high IATs then swapping back to the stock box for what felt like an improvement in comparison 👍
I admit my first mod for my 11 GT was a K&N Typhoon CAI. Thought it looked awesome in the engine bay. I went to a Dyno Day at a local tuner and he said the metal air tube completely defeats the purpose because it absorbs the engine heat and feeds hot air in. Needless to say, I ditched the K&N and went back to the stock Airbox and my IATs are lower. Thanks for your honest opinions, love the channel!
I bought mine with a k&n Blackhawk and idk what’s wrong with it but it always made the car struggle after 6.3k rpm so I got the stock air box and now I’m waiting for a pmas
this is 100% true. My pmas in traffic or low speeds below 40mph is heat soak galore. Yes once im rolling for several seconds it hauls and I have a 2015 which doesnt have the better intake then the 18's+.
I kept my factory airbox on my '13 GT with a K&N panel and just replaced the tubing for an Airaid one. Works well! I try to explain this to so many. Every expensive "CAI" I had in the past on previous cars always worsened performance due to high IAT numbers. In the fender or in the engine bay "shielded off," it didn't really matter.
I reworked my PMAS and partitioned certain areas so that I get almost the same temp as stock on the highway, and it’s way better in traffic than out of the box. Completely happy with the setup, but to be fair I did have to get inventive to get results. Out of the box, IATs at long red lights were shocking.
Dude I already knew this LoL keep em coming YOLO! My procharged 2012 mustang is toast . Now I'm sporting 18 gt350. Need opinion on twin or single turbo.
Very informative vidio . Do they make a stock filter element such as k& n that can be substituted for original square filter that would let a little more flow?
great video and this is something I have been thinking about lately. I am curious about going back to my stock air box for drag racing so that IATs are not insane staging up to the tree. High IATs rob HP, so if I can bring those back down, I wonder if I can improve getting out of the hole faster and harder. I have e85, headers, CAI and pulled my interior. I raced another 18 with same final gears, he had full interior and only e85 tune. we had same tires and we both cut the same 60 and trap speed, mph, everything.
What do you think about the power packs that ford created for the 15-17 that’s open? Did they f it up? What your saying makes perfect sense, so I wonder why ford made these the way they did.
I know very little about cars but I have recently been trying to put a little money into my 2017 Ecoboost Premium. I know I'm not going to get a V8 roar so the next best thing is the beautiful sound of the turbo. with what you were saying about sticking with something close to stock.... That sorta suggests that I should go with the closed box option like AirRaid, but once the hood is closed, the Roush option with the shield... wouldn't that suffice?
How do you feel about the corrugated section of the intake just past the sensor on the CAI? Does it disturb the air enough to make a detectable difference? Even if a guy were to make a section of tubing that goes from the tb to the first joint?
I put an Injen CAI on my 2015. Doesn't require a tune so you're using the factory MAF sensor, closed box design and it works. Ran 2/10ths quicker 1/4 mile in 2000ft worse density altitude. Keeps those air intake temps down as well. I put a little foam tape where the Injen meets the factory air inlet since it doesn't have the rubber molding like the factory intake and my intake air temps are about 6-7 degrees above ambient.
Hi vxer, I'll be getting the same filter soon, it's good to hear it works properly. What kind of foam tape did you install? I guess it must be temp/humidity resistant?
@@dennylazzari8175 I found some foam tape at O'Reillys Auto. I used the thin stuff (maybe 1/8" thick). Not a perfect seal like the rubber factory seal, but better than nothing. Can't remember the name brand.
Hey Alex you started touching base on the turbulence and the design of the air box. What do you think about drilling out the rest of the holes in the grill?
Airaid design is the best then. It’s enclosed and works exactly like the stock design but you get more air. And it also still uses the ram air induction from the grille.
How’s the ‘18 intake bolted to the gen 2 coyote in the red car working out? Wondering if there is anything to be gained here over the stock gen 2 intake.
What do you think of the roush intake that comes with the phase one kit on a 16 s550? Love the content man and I will be talking to Lund at some point 👍
Hi I like your videos. My question is snorkel snorkel intake. There’s only about three open honeycombs in the girl. If I drill out a couple more honeycombs to get more air down the snorkel is that a good idea. Or will it help get more air into my airbox.
I thought it was well documented that PMAS was the way to go. After this video it seems that the route to go is a hi-flow filter and a smooth tube. Good food for thought.
Hay Alex quick question do you believe putting a gt500 hood on a gt mustang would be a simple way to get clearance for a cobra jet intake manifold I mean if it clears a supercharger would it clear the intake manifold thx and have a good one man
I've been telling people this for 2 years. The aftermarket CAI kits are senseless in a NA car. If the CA box doesn't seal it from the engine compartment completely, your defeating the purpose of having one to begin with.
If you are looking for a little more noise without causing any loss of performance I highly recommend the airaid intake modular tube , it works great, just leave the original box and that is all, no problems, your not going to make any extra HP but also not going to lose any but you can make more throdle noise
Would be nice to see dyno numbers. I agree with you. It's the same on an F 150 ecoboost. Dyno numbers don't show any improvement over the stock air intake.
Most “non tune” cold air intakes for the new mustang make very little difference on hp for the new 18+ mustang. The difference is the restrictor in the air intake with a tune. The Roush for the 18+ has the restrictor that can be removed. With the restrictor it is very similar to stock with out it, it needs a tune and takes more air in. Simple. It’s not like cars from the year 1999. Stock parts are very good for high performance cars. Ford did a lot to squeeze as much power as they could out of the 18+ mustangs. So with that being said. The best intake in my opinion is the Roush Cold air intake for the 2018+ mustang GT which is very similarly designed to the stock intake with a shield and cover blocking the hot air out.
I have a 2018 5.0. A few years ago I replaced the stock intake with a roush cold air intake which came with a tune. It could run with or without a tune. There was nobody here who could install the roush tune so I’m running it without a tune. The throttle response is instant. Without the roush intake there is a little bit of a lag when I floor the gas pedal. Is the car faster, maybe not but it is quicker.
@@YDBT4LIFE Alex, any update on this? I'm looking at CAIs for my 18 GT currently. Great info. Everyone seems to go JLT, but great point about the IAT. If the Steeda MAF signal is wonky, I may stick with the stock for now and just add a tune in the short term.
@@YDBT4LIFE Thanks, man. Will likely be going with your flex tune, as I daily it and only have reliable E85 close to home. Will probably save headers, x-pipe, CAI for next year.
I always scratch my head when I see the air filter hanging in the engine bay, drawing in hot engine bay air. The factory unit is just fine for mild mods, jmo.
Hey Alex,, I have whipple st.2 on my 18, my kit came with the open air box. I saw that whipple offers a closes air intake now with their kits. Do you think I should order one from whipple. I don't think they offered it last October when I got mine. Any info woukd be appreciated.
Somebody Didn’t get any nookie last night .lol Great vid and all the manufacturers need to leave are boy alone if not for Alex most of us wouldn’t own our be buying mustang parts. 👍🏼
My question is do the Ruffles in the intake tube actually slow down air flow because my intake tube on my 2006 Crown Victoria has Ruffles similar to that also and I was wondering should I just remove that intake tube and put a smooth intake tube to replace the factory one
Hi, just asking I have 26"s on my 2019 could you tell Mr what should I do to make my engine handle the extra weight and could u send me a link to upgrade my bushings and any thing that I need to slow the wear and tear of the wheel housing thanks just looking up to u for advice
So then in “your opinion Alex” the Steeda closed box design is that good? Based on the ones you’ve tuned compared to like a P.....s ot J....T? 😳😬 i’ve heard Pmas has a cleaner maf signal. Hope Steeda revises it.... i like my pmas but damn it sucks every time it rains and the car is parked i have to cover the filter up so it doesn’t get wet! 🤦♂️
I had a steeda cold air on my S197 coyote but after researching about cold air aftermarket intakes ( this video included) it only gains about 8 hp advantage over the factory cold air if that. I reinstalled the factory cold air and now prefer how it looks even. It kind of makes it more of a sleeper, LOL, if you can call it that anyway. I've thought about the K&N modular intake tube but the price just makes me want to cringe.
Im installing mine tomorrow. I just uploaded my 93 Lund tune to my SCTx4. Not really expecting too much but I got a used system for $200 so I said fuggit lol
Do you notice IAT'S from the stock box getting higher than previous Coyotes? I have never owned a gen 2 car but my last Mustang was a 2013 with stock air box, E85, Kooks LT's and the IAT'S on that car seem to be better than my 2019. My 2019 is still stock and the shocking thing is I haven't owned it long enough to see summer yet. The IAT'S seem to go up quicker and stay there longer than my gen 1 car.
So you say closed intake if u don’t get a CJ but didn’t lund NA car have a closed box steeda intake with the cobra jet intake? Just wanna know how come u didn’t go open
I have Long tube Headers on a 2017 Gt, I was planning on adding a ported 2018+ manifold with a stock 2018 Intake, would it be a waste if I don’t add an actual aftermarket intake?
Ah yes my friend... We get older (I'm 55!), and we finally realize that not all shiny things under the hood are necessarily the best option for our Rides!!! 😲 Seriously though, you're right. That 18-up Coyote intake setup is incredible for a CAI!! 👍👍 BUT, for us guys who like our older Stangs.... The Stock Intake SUCKS! 😖 And I'm referring to SN-95 & S-197.... I'm actually surprised that NOBODY made a CAI with a Closed Element and enough plumbing to run a 4" Tube to the Grille. Wouldn't it work???
Hi Alex, what do you think about Holley Intech CAI? Looks like stock yet with open pod filter. The down side probably is that it doesn't have a unit that needs tune.
Since my "application" is a gen1 2013 coyote with minor mods, what I get from this is....bigger diameter intake tube coupled with the stock air box would probably be best - possibly increase airflow (especially with a better filter) and keep IATs down. Got it, I think?
Your are a straight forward dude i congratulate you😎👏 keep the videos coming up!
I learned something new thank you Alex this is why I’m subscribed ! ! & I don’t even own a coyote car(yet) !
Always introducing new insights into my rookie Mustang career
I droped in a k&n filter and also drilled out the front grill holes. It made a difference in iat’s both in traffic and cruising and no water issues at all. My car is daily driving and been driven thru some good rain storms and not a single issue with water getting into the inlet.
All respect for sharing true information instead of marketing product that is not needed!
Alex thanks as always. Big thumbs up what I have learned with my 18 Whipple is not to stomp it when IAT's are high. I have the stock Whipple CAI open system. It is open at the top and the bottom. Plus holes around the tube, lots of heat entrainment possible. I took my hoodliner off and am working on modifying my cooling vents in the hood and the rear hoodseal to try and get the heat out and cooler air in.. without changing out the entire Cai for a lided unit. If you get fired Cletus is looking for a canyon car tuner. Just got to make it fly..
Thumbs up simply for a solid video description lmao. Thanks for the info tho!
I have longtubes and Lund flex fuel, stock intake. Tbh IAT temps always are within 10 degrees of ambient, everyone always asks why I don’t have a CAI, simply don’t need it. 🤷🏼♂️
This is exactly why I'm running my corsa cai it's the same exact setup as the stock and it's fabulous
Great video Alex, and please keep telling the truth, that’s why most of us follow you cause you are real. 💪🏽💪🏽👍🏽👍🏽
Thanks Alex always good info. Steeda for the 14 gts use the stock air ducting and shield the engine bay.
Thanks for sharing the knowledge brother
Best CAI to stay close to stock and get slightly more air is the Injen Evolution. I used it when I had my 2016 GT and loved it. With just the intake and a tune I ran 412 HP and 387 TQ to wheels. Those where literally the only mods I had. Not much of the increase was from the intake as usual but the intake temperatures were 3-4 degrees above ambient with the Injen and 5-7 with stock while moving. They would creep up when in traffic but nothing like my GT350 does. I hit 151 degrees today with an ambient temperature of 82 degrees at idle. That’s what happens with open element intakes. And I’ve never seen anything less than 5 degrees above ambient in the 350 except in a cold winter morning with temperatures around 30 degrees
Great video! Exactly why I only put in a better flowing drop in filter.
dave j I went with a k&n. There is some other ones that may be a little better.
i don't care for white but your S550 looks good as hell with those wheels it sits just right!! Steeda makes a sweet cai now for s550
Solid video Alex
You are looking fit / trim, keep up the good work and post up when you set a new dead lift best
(Dave from Chicago)
Good video man I have always thought this which is why I never bought one yet but everyone just knows you have to have one
Great video Alex thank you!
Dry high flow Saleen filter in stock air box seems to be the best. Coldest air from fender and traps dirt well. Breathes good.
Great video, been going back and forth weather to get a CAI or not on my 2020 GT, all I have is a SR X-pipe. Will be getting a tune in the next month or so
This video would have saved me a headache of trying a cold Air. Dealing with high IATs then swapping back to the stock box for what felt like an improvement in comparison 👍
Great content Alex,thanks!!
bad ass video bro, good info keep doing a good job
I admit my first mod for my 11 GT was a K&N Typhoon CAI. Thought it looked awesome in the engine bay. I went to a Dyno Day at a local tuner and he said the metal air tube completely defeats the purpose because it absorbs the engine heat and feeds hot air in. Needless to say, I ditched the K&N and went back to the stock Airbox and my IATs are lower. Thanks for your honest opinions, love the channel!
I bought mine with a k&n Blackhawk and idk what’s wrong with it but it always made the car struggle after 6.3k rpm so I got the stock air box and now I’m waiting for a pmas
Steeda closed air box is like 121mm mass air flow should work nicely
I'm thinking the same. Might just drop a K & N filter in for now.
K&N filters flow worse than paper elements. Been proven to death
@@Saml01 link for proof on that?
@@Andreallen4 of course he dont have proof.
@@Saml01 i also heard something about K&n what about air aide filter ?
Airaid intake tube, with an aFe drop in inverted filter is basically the ideal setup you were talking about. That's what I'm running anyway.
Thats what i have too, but the air inlet tube is smaller going in the throttle body:(
Know tune required...
this is 100% true. My pmas in traffic or low speeds below 40mph is heat soak galore. Yes once im rolling for several seconds it hauls and I have a 2015 which doesnt have the better intake then the 18's+.
I kept my factory airbox on my '13 GT with a K&N panel and just replaced the tubing for an Airaid one. Works well! I try to explain this to so many. Every expensive "CAI" I had in the past on previous cars always worsened performance due to high IAT numbers. In the fender or in the engine bay "shielded off," it didn't really matter.
I am thinking of possibly going this route - would you say that the Airaid was worth it?
I reworked my PMAS and partitioned certain areas so that I get almost the same temp as stock on the highway, and it’s way better in traffic than out of the box. Completely happy with the setup, but to be fair I did have to get inventive to get results. Out of the box, IATs at long red lights were shocking.
Alex , great video !!!! If I put a 2018 intake on my 2015 . Could I used the 2018 air intake, or go aftermarket??
youre so right im thinking the same as you what i did is to install a kn in the stock intake
Dude I already knew this LoL keep em coming YOLO! My procharged 2012 mustang is toast . Now I'm sporting 18 gt350. Need opinion on twin or single turbo.
Very informative vidio . Do they make a stock filter element such as k& n that can be substituted for original square filter that would let a little more flow?
great video and this is something I have been thinking about lately. I am curious about going back to my stock air box for drag racing so that IATs are not insane staging up to the tree. High IATs rob HP, so if I can bring those back down, I wonder if I can improve getting out of the hole faster and harder. I have e85, headers, CAI and pulled my interior. I raced another 18 with same final gears, he had full interior and only e85 tune. we had same tires and we both cut the same 60 and trap speed, mph, everything.
Zander13 were you pissed to see that time sleep?
What do you think about the power packs that ford created for the 15-17 that’s open? Did they f it up? What your saying makes perfect sense, so I wonder why ford made these the way they did.
"robust and thick" that's what she said
WAYOHHHHHHHHHHHH
I know very little about cars but I have recently been trying to put a little money into my 2017 Ecoboost Premium. I know I'm not going to get a V8 roar so the next best thing is the beautiful sound of the turbo. with what you were saying about sticking with something close to stock.... That sorta suggests that I should go with the closed box option like AirRaid, but once the hood is closed, the Roush option with the shield... wouldn't that suffice?
My Steeda Intake uses the cold air inlet just like the stock unit. No bypass. All good all cool!
Thoughts on putting the DEI gold foil on the intake? Road course car
Hey Alex what’s you’re take on tru cold air that pull From the fender or bumper?do you recommend heat wrapping them or not necessary.
How do you feel about the corrugated section of the intake just past the sensor on the CAI? Does it disturb the air enough to make a detectable difference? Even if a guy were to make a section of tubing that goes from the tb to the first joint?
I put an Injen CAI on my 2015. Doesn't require a tune so you're using the factory MAF sensor, closed box design and it works. Ran 2/10ths quicker 1/4 mile in 2000ft worse density altitude. Keeps those air intake temps down as well. I put a little foam tape where the Injen meets the factory air inlet since it doesn't have the rubber molding like the factory intake and my intake air temps are about 6-7 degrees above ambient.
Hi vxer, I'll be getting the same filter soon, it's good to hear it works properly. What kind of foam tape did you install? I guess it must be temp/humidity resistant?
@@dennylazzari8175 I found some foam tape at O'Reillys Auto. I used the thin stuff (maybe 1/8" thick). Not a perfect seal like the rubber factory seal, but better than nothing. Can't remember the name brand.
So Alex.... Do you recommend a cai that pulls air from the fender??? Will they iats be higher in traffic or due to the metal construction
Good info as always
Another good way to lower your iat's is to use a VMP dual fan heat exchanger yeah? although I guess that's for blower application only correct?
Hey Alex you started touching base on the turbulence and the design of the air box. What do you think about drilling out the rest of the holes in the grill?
Good advice. I only gained .05 with pmas. Not worth the cost or hassle.
Airaid design is the best then. It’s enclosed and works exactly like the stock design but you get more air. And it also still uses the ram air induction from the grille.
Can you send me a link ?
@@umairejaz6665 fr
How’s the ‘18 intake bolted to the gen 2 coyote in the red car working out? Wondering if there is anything to be gained here over the stock gen 2 intake.
What do you think of the roush intake that comes with the phase one kit on a 16 s550? Love the content man and I will be talking to Lund at some point 👍
The intake is good because it’s a closed box air intake but the Roush tune sucks😕
Hi I like your videos. My question is snorkel snorkel intake. There’s only about three open honeycombs in the girl. If I drill out a couple more honeycombs to get more air down the snorkel is that a good idea. Or will it help get more air into my airbox.
I thought it was well documented that PMAS was the way to go. After this video it seems that the route to go is a hi-flow filter and a smooth tube. Good food for thought.
Hay Alex quick question do you believe putting a gt500 hood on a gt mustang would be a simple way to get clearance for a cobra jet intake manifold I mean if it clears a supercharger would it clear the intake manifold thx and have a good one man
Face is looking slimmer, your workouts are paying off.
I've been telling people this for 2 years. The aftermarket CAI kits are senseless in a NA car. If the CA box doesn't seal it from the engine compartment completely, your defeating the purpose of having one to begin with.
Thank God roush makes a closed one but for $400.... ehhhhh
Great info !!
Afe makes a decent one for the edge st and other models, and they do offer a cover plate for the intake, too.
Have you dealt with the corsa closed air box cai for gen 1 coyotes?
If you are looking for a little more noise without causing any loss of performance I highly recommend the airaid intake modular tube , it works great, just leave the original box and that is all, no problems, your not going to make any extra HP but also not going to lose any but you can make more throdle noise
K&N typhoon seems to be a good design was thinking of replacing JLT with it, for this among other reasons
Would be nice to see dyno numbers. I agree with you. It's the same on an F 150 ecoboost. Dyno numbers don't show any improvement over the stock air intake.
Corsa Performance makes a closed box intake that removes the destructor as well for the 2018+ GT
Most “non tune” cold air intakes for the new mustang make very little difference on hp for the new 18+ mustang. The difference is the restrictor in the air intake with a tune. The Roush for the 18+ has the restrictor that can be removed. With the restrictor it is very similar to stock with out it, it needs a tune and takes more air in. Simple. It’s not like cars from the year 1999. Stock parts are very good for high performance cars. Ford did a lot to squeeze as much power as they could out of the 18+ mustangs. So with that being said. The best intake in my opinion is the Roush Cold air intake for the 2018+ mustang GT which is very similarly designed to the stock intake with a shield and cover blocking the hot air out.
I have a 2018 5.0. A few years ago I replaced the stock intake with a roush cold air intake which came with a tune. It could run with or without a tune. There was nobody here who could install the roush tune so I’m running it without a tune. The throttle response is instant. Without the roush intake there is a little bit of a lag when I floor the gas pedal. Is the car faster, maybe not but it is quicker.
Bro explained it perfectly
Cough cough Steeda closed air box definitely the best
Yeah seems like it. They’re running it along with a CJ intake on their 10sec N/A car
Their maf signal isnt the cleanest.. they will be revising it soon
@@YDBT4LIFE Alex, any update on this? I'm looking at CAIs for my 18 GT currently. Great info. Everyone seems to go JLT, but great point about the IAT. If the Steeda MAF signal is wonky, I may stick with the stock for now and just add a tune in the short term.
Stay stock until you go Max effort
@@YDBT4LIFE Thanks, man. Will likely be going with your flex tune, as I daily it and only have reliable E85 close to home. Will probably save headers, x-pipe, CAI for next year.
I always scratch my head when I see the air filter hanging in the engine bay, drawing in hot engine bay air.
The factory unit is just fine for mild mods, jmo.
That's why I like the Corsa Cold air intake.
.... Almost makes me want to try hooking up the Chrome CAI Tube to the Stock Airbox with a K&N Filter. 😲
Hey Alex,, I have whipple st.2 on my 18, my kit came with the open air box. I saw that whipple offers a closes air intake now with their kits. Do you think I should order one from whipple. I don't think they offered it last October when I got mine. Any info woukd be appreciated.
Somebody Didn’t get any nookie last night .lol
Great vid and all the manufacturers need to leave are boy alone if not for Alex most of us wouldn’t own our be buying mustang parts. 👍🏼
More S550 content dude 👍
What do you think about the JLT cold air intake? For a Mustang 2015-2017
What your take on the 2018-2021 roush intake
My question is do the Ruffles in the intake tube actually slow down air flow because my intake tube on my 2006 Crown Victoria has Ruffles similar to that also and I was wondering should I just remove that intake tube and put a smooth intake tube to replace the factory one
To me when you say cold air intake i only think of the type inside the fender like the jlt i have for my cobra. For my 17 gt im keeping stock with kn.
Hi, just asking I have 26"s on my 2019 could you tell Mr what should I do to make my engine handle the extra weight and could u send me a link to upgrade my bushings and any thing that I need to slow the wear and tear of the wheel housing thanks just looking up to u for advice
Is the roush CAI worth it since it’s a closed air box and works with ford directly.
Does this mean I can put a gen 3 intake in my gen 2 for an upgrade?
was thinking Steeda closed box thoughts?
So then in “your opinion Alex” the Steeda closed box design is that good? Based on the ones you’ve tuned compared to like a P.....s ot J....T? 😳😬 i’ve heard Pmas has a cleaner maf signal. Hope Steeda revises it.... i like my pmas but damn it sucks every time it rains and the car is parked i have to cover the filter up so it doesn’t get wet! 🤦♂️
I had a steeda cold air on my S197 coyote but after researching about cold air aftermarket intakes ( this video included) it only gains about 8 hp advantage over the factory cold air if that. I reinstalled the factory cold air and now prefer how it looks even. It kind of makes it more of a sleeper, LOL, if you can call it that anyway. I've thought about the K&N modular intake tube but the price just makes me want to cringe.
Im installing mine tomorrow. I just uploaded my 93 Lund tune to my SCTx4. Not really expecting too much but I got a used system for $200 so I said fuggit lol
Do you notice IAT'S from the stock box getting higher than previous Coyotes? I have never owned a gen 2 car but my last Mustang was a 2013 with stock air box, E85, Kooks LT's and the IAT'S on that car seem to be better than my 2019. My 2019 is still stock and the shocking thing is I haven't owned it long enough to see summer yet. The IAT'S seem to go up quicker and stay there longer than my gen 1 car.
What about the ford performance cold air intake with tune ? That ford came out with the 2018 plus mustang gt's
Is this the same for 2007 Gt Mustang with the 4.6L than this 5.0 2018 ?? You recommend to stay with the stock cold air system??
Good advice
When you doing a video for the trucks again?
Alex you know what be nice if a company would make a see through cover only for a stock cold air 2015-2017 model... That would be sick...
Does make it sound a bit better imo. Even if it doesnt help with hp.
Would like to have seen a dyno run with stock and after market compared side by side.
So you say closed intake if u don’t get a CJ but didn’t lund NA car have a closed box steeda intake with the cobra jet intake? Just wanna know how come u didn’t go open
I have Long tube Headers on a 2017 Gt, I was planning on adding a ported 2018+ manifold with a stock 2018 Intake, would it be a waste if I don’t add an actual aftermarket intake?
*Post 42* Coyote Breastmilk squirts just fine with a Ford cold air intake, especially Ford's 2018+ milky cold air induction systems
K&N drop in filter......best bang for your buck 💪💪💪
Yepp, sucks my Procharger IATs run through the roof here in MD while I'm in traffic or creeping in first and it drives me insane.
Ah yes my friend... We get older (I'm 55!), and we finally realize that not all shiny things under the hood are necessarily the best option for our Rides!!! 😲
Seriously though, you're right. That 18-up Coyote intake setup is incredible for a CAI!! 👍👍
BUT, for us guys who like our older Stangs.... The Stock Intake SUCKS! 😖
And I'm referring to SN-95 & S-197....
I'm actually surprised that NOBODY made a CAI with a Closed Element and enough plumbing to run a 4" Tube to the Grille.
Wouldn't it work???
Hi Alex, what do you think about Holley Intech CAI? Looks like stock yet with open pod filter. The down side probably is that it doesn't have a unit that needs tune.
Or would a Steeda closed box works better with a header and a tune?
Since my "application" is a gen1 2013 coyote with minor mods, what I get from this is....bigger diameter intake tube coupled with the stock air box would probably be best - possibly increase airflow (especially with a better filter) and keep IATs down. Got it, I think?
Yes!!
Stock OEM with aftermarket filter or steeda closed cia for the win.
Hey Alex can I take a stock 2018 AirAid Intake and put it on my 2015 Mustang GT?
D mark or rev auto is pretty beast tbh
Stock intake with aftermarket filter?