Rogue Fabrication M600 Tubing Bender Kit Build
Вставка
- Опубліковано 30 лип 2021
- Been wanting to start bending tubing for a long time. Finally pulled the trigger on a bender and saved a few hundred bucks by going with the weld together kit. Check out how it went together.
***Affordable self-paced welding courses taught by me***
courses.timwelds.com
***Where to Buy Practice Metal and Weld Kits***
USE DISCOUNT CODE 'TIMWELDS' TO SAVE 10%
weldmetalsonline.com/?ref=048...
***Where to Buy Top Quality Welding Machines and Accessories***
USE DISCOUNT CODE 'TIMWELDS' TO SAVE 5%
www.usaweld.com?ref=timwelds
***Other Videos That You Might Like***
4 Welding Processes Explained: • 4 Types of Welding Exp...
TIG Welding Basics for Beginners: • TIG Welding Basics for...
MIG Settings Explained: • MIG Welder Settings: M...
7 Places to Buy Metal for Welding Projects: • 7 Places to Buy Metal ...
3 Welding Tables for Small Shops: • 3 Welding Tables for S...
HTP Invertig 221 Review: • HTP Invertig 221 Revie...
***Things That Make Welding Easier for Me***
(These may be affiliate links that cost you no extra, but provide a small commission from sales to support the making of these videos)
Grasshopper Clamp: amzn.to/2TOU0QP
Switchable Magnetic Squares: amzn.to/3wzMOoR
Mag-Tabs: amzn.to/3e1LzYX
My recommended TIG Welder: usaweld.com/products/invertig...
Use the discount code TIMWELDS to save 5% off any purchase at usaweld.com
***Affiliate Notice***
Some of the links on this page are affiliate links which provide a small commission from sales to help support this channel and make these videos possible. Thanks for your support! - Наука та технологія
You can learn to weld. I'll show you exactly what to do in my affordable online welding courses at courses.timwelds.com.
nice little project, and good presentation!
You’ll have to update us on how you like it later once you’ve used it a fair bit
I am glad you showed the bend in real time and not x20 speed. Nice. I guess the speed was not so bad. Thank you.
Looking to get one for my shop classes as school. Thanks for the video!
Very cool!
🤯 holy crap! Nice build!
Thanks!
Super nice kit…… can’t wait to see what you have planned in the future.
Thanks!
That is super cool.
Thanks!
Oh fancy! The concept of "taking things to the powder coater" is a good one too, maybe I'll look into that once I visit a proper metal supplier during business hours 🤣
Thanks! I used to try to do everything myself, but I’ve found some good vendors and it’s helped me get a lot more done with my limited time.
Those don't exist anymore. Darrow...for the Prosecution
I need a bender like that !!!
I’m pretty excited about it!
Nice! Did you make that upgraded knob or did it come with the kit?
Where can I buy the upgrade to realease the hydraulic jack pressure by hand? The little turn knob I mean?
Hello Tim, congratulations on your channel growing like crazy! I have a small channel also that is all about welding now. My question is, how is your channel growing so fast? Is there any certain thing you are doing or using to help you grow? What is your technique to get views?
Thanks!
With everything you do, I’m surprised you don’t also do your own powder coating. Is there a reason for that?
Speaking of shop tools, do you have a good recommendation of a good tube notcher for aluminum tube? I’m looking for 0-55° range and 3/4” OD and up.
I’ve been googling but have had no luck.
I just have a cheap one that I got off of Amazon. It’s not awesome, but does the job. If I want something to fit really nicely, I just cope it by hand.
@@TimWelds That’s what I’m seeing too. I think there are a dozen manufacturers using the same model and just applying their own stickers to brand it.
They look a bit funky but worth a shot since they’re so cheap. Thanks for the reply.
To Tim's weld. How much does a kit like this go for to weld it yourself for the tubing Bender that you showed on your video. God bless brother. Awesome awesome video
I love you fact you don't waste our time with a cheesy intro
Hi, great videos... why not do a DIY project start to finish? Suggestions on joint types and welds? Juat a suggestion
Thanks so much! I’m planning to move toward doing more projects on my videos.
Do you have any comments on why you picked the m600 over the classic JD squared bender? A tube bender is one of the next things I plan to add to my shop. Thanks.
3 reasons that I picked this over JD2:
1. It doesn’t have to be mounted to the floor (I don’t have space for that)
2. It bends vertically up rather than sweeping around, which requires less open floor space
3. The air over hydraulic system is a lot less work than rowing the boat on one of those manual benders
All that said, JD2 benders work well too and have been used make a lot of good stuff.
Hey tim just curious what is the thickness of the outer plates and the big round one? Im debating on buying one of these kits as well but it’s hard to tell what thickness they are. Im guessing 1/4” but they almost seem thinner then that
They’re 3/16” I just used it today, still working good.
@@TimWelds thanks for getting back to me I appreciate it!
Very cool and well thought out. Up to what size and wall thickness can you bend on this unit?
I was pretty impressed with it. The capacity depends on the particular model. There’s a chart on their site that shows the different capacities. This is the HD, which is the medium one. It’s rated at .188” wall thickness on 2” diameter tubing. At 1.5” diameter, it can handle solid bar.
@@TimWelds blimey!! If you can bend chromemolybdenum you can make roll cages
A lot of great cages have been built with rogue benders. I’m hoping to work up to that, but I have a lot to learn.
@@TimWelds as you learn, i learn. I could not weld to save my life. After watching your vids i can almost make a decent join. Stick welding though should be abolished. Mig is just so much easier
What radius 1” die did you choose?
I went with 4.5", but I'll probably add a 3.5" die as well.
what diameter tube will it work with? are dies extra?
It goes up to 2”, I believe. You do need a die for each size you want to bend. The dies are pricey, so I’m going to add them one by one as I have work for a particular size in the shop.
@@TimWelds thanks for the info. let us know how it works.
I wanted a 20 minute video
Nice, but kind of bulky. I can almost fit the round parts into my powder coat oven.
It is kind of big...now I just need to figure out where to put it. On the other hand, more compact manual benders have to be mounted to the floor, which is probably worse. What kind of powder coat oven do you have?
@@TimWelds it’s really a lab oven. The inside is 28 wide, by 17 deep by 17 high. The problem when you have too many things in your shops, is that you can’t always get what you want in a big enough size. So my welding and powder coating are not done in my large basement, where my other shops are, but in my garage, which is a two car. But my house is from 1925, so it’s not a large two car. But my 14” lathe is there as well, along with deep steel shelving units. I built a powder coating spray booth, which has to have room.
You know, when you start, you think that you’ve got a lot of room. But as you accumulate things over time, that room disappears.
Too much stuff to deal with I think you should have bought the already built unit to maintain some kind of warranty and the operation of this unit seems way to complex.ive always used the lobuck tools bender but they don’t make it anymore so I think I’ll get the affordable Bender unit,
Do not buy the weld together kit. It’s a piece of shit trust me. It does not square up. Buy anything else!!
Mine squared up great, I’ve bent a lot of tubing with it and am very pleased for the price.
@@TimWelds well i mine wasn’t cut on their plasma very well it’s all messed up. I know how to weld and how to square up things. I build f135 jet engines for a living and before that I welded for the same company. I must have gotten a junk batch which is super dissatisfying
Dude shave your head let it go
I’m still in the denial phase, I’m sure I’ll get there eventually. 😂
@@TimWelds just do itttttt I did and it was awesome!!