Great video! I am looking to build a tube bending setup to start building roof racks. Starting out I’ll be using 1/2” and 3/4” maybe 1” tube….. Can I use this tube bender and hydraulic ram? Can you link dies that would work with this Amazon bender? Thanks again!
I haven’t done any research to see if anyone makes a true hydraulic setup for it. If you are looking at setups this is basically the exact same bender ad the Woodward fab and Eastwood bender just without a brand name. Any dies or components for those will with this bender.
@@aidannunan7164 I just checked for it and you’re right, it is unavailable now. I don’t know if there is a eBay store selling it or who else would have it.
@@JerryK-i6l unfortunately I can’t find it for sell anymore. This video put a pretty big demand on it I think now they probably sitting on a boat somewhere.
@@JerryK-i6l unfortunately I can’t find it for sell anymore. This video put a pretty big demand on it I think now they probably sitting on a boat somewhere.
I put the link to the bender in the description. You can use any Woodward Fab or Eastwood dies. www.amazon.com/Eastwood-Radius-Replacement-Capacity-Machine/dp/B07PRL4RNY/ref=mp_s_a_1_1?crid=3V6QRT4WU1J2D&dib=eyJ2IjoiMSJ9.pHhc44Px9H8wJo5kKQC6PDEyGhoRv8Ed9XmQNv-6__oZ7sssa0LiOBiI_-pAQd1Tr_GxsUztC6Dr8WYsMj13H1GU4N8fcvNNJ8nkMn6Ehs8qG5iQJGXI2FcFZQRBwnhV4z8yuUiQpU7uBCPHiRlB0bJVZ-fL4KmP73aVGAvlK3264MzbiVRFs7R3wawNmjDvihbHUtvj1XBUW5OHLVb1yQ.592zYfgituoZDFM3LZiAB3hgrr7sE-mxevLy_qDLvfE&dib_tag=se&keywords=eastwood+tubing+bender+die+2%22&qid=1714372676&sprefix=eastwood+tubing+bender+die+2+%2Caps%2C341&sr=8-1
Great vid, it’s been a while since I’ve been on a bender but I used to have a tub of white lithium grease and a brush to apply a litttle grease to the die, clamp and follower. This helps to keep them from premature failure! I might have to pick one of these up, thanks
Excellent video! Really appreciate the call out! Glad to see the Ram Mount is working for you!
Call it like I see it! Had to have something American made.
@@TrailTime. Well we sure appreciate the support!
Great video you made it to where I understand I appreciate it
@@lancebranham2314 I’m glad you enjoyed it. I liked how I had 3 different cameras and was able to switch between the shots in the editing.
this is hands down the best tube bending video on youtube. thank you . getting ready to order all of this stuff. 👍🏼
I’m glad you enjoyed the video. I wish I had the money for a American made bender. But this one does everything I need at a fraction of the cost.
I’m not able to find the tube bender it self for $209 are you in the USA ?
@@ACEJEAN420i found it on Amazon
Thanks for the demo! Appreciate your time. :)
👍🏼
I bought this bender after watching you video. So far so good. Fast shipping, great price. Thank you sir.
Sir… that’s my dad’s name. Haha, I’m happy with mine and got to put the savings into more Jeep parts.
Very easy to understand and informative video! Thank you!
I noticed when I set up two cameras like I did in this video, it makes the video much easier to watch.
Very educational. Thank you!
Thanks.
Where did you get the yellow degree dial at along with the pointer for it??
@@erickarr2554 www.jmrmfg.com/products/raceline-degree-wheel
The 1 inch marks are there to show you how long of a piece you need to make a bend of that angle which he didn't explain.
Where would I get a 1 3/4” od die?
I think I need to pick one of these up
Whered u get the adpater for the engine stand? Looks very convenient
I welded a piece of 3/8” angle iron to a piece of 2 3/8” tube.
Scrap bin special!!
Does it come with any dies and if not where can i get dies
@@montecarlo6.0turbo any dies that are compatible with the Woodward Fab WFB2 will work.
Great video! I am looking to build a tube bending setup to start building roof racks. Starting out I’ll be using 1/2” and 3/4” maybe 1” tube…..
Can I use this tube bender and hydraulic ram? Can you link dies that would work with this Amazon bender?
Thanks again!
I haven’t done any research to see if anyone makes a true hydraulic setup for it. If you are looking at setups this is basically the exact same bender ad the Woodward fab and Eastwood bender just without a brand name. Any dies or components for those will with this bender.
Is there an updated Amazon link. Looking to buy and it is unavailable on Amazon.
@@aidannunan7164 I just checked for it and you’re right, it is unavailable now. I don’t know if there is a eBay store selling it or who else would have it.
Is there a new link to Amazon. They have the Woodward fab 1 but can't find this 1. Great video. Thanks
@@JerryK-i6l unfortunately I can’t find it for sell anymore. This video put a pretty big demand on it I think now they probably sitting on a boat somewhere.
@@JerryK-i6l unfortunately I can’t find it for sell anymore. This video put a pretty big demand on it I think now they probably sitting on a boat somewhere.
Nice!
Great video, maybe show the results lol
What's the model number for this one?
where do I get the 2" die from?
I put the link to the bender in the description. You can use any Woodward Fab or Eastwood dies.
www.amazon.com/Eastwood-Radius-Replacement-Capacity-Machine/dp/B07PRL4RNY/ref=mp_s_a_1_1?crid=3V6QRT4WU1J2D&dib=eyJ2IjoiMSJ9.pHhc44Px9H8wJo5kKQC6PDEyGhoRv8Ed9XmQNv-6__oZ7sssa0LiOBiI_-pAQd1Tr_GxsUztC6Dr8WYsMj13H1GU4N8fcvNNJ8nkMn6Ehs8qG5iQJGXI2FcFZQRBwnhV4z8yuUiQpU7uBCPHiRlB0bJVZ-fL4KmP73aVGAvlK3264MzbiVRFs7R3wawNmjDvihbHUtvj1XBUW5OHLVb1yQ.592zYfgituoZDFM3LZiAB3hgrr7sE-mxevLy_qDLvfE&dib_tag=se&keywords=eastwood+tubing+bender+die+2%22&qid=1714372676&sprefix=eastwood+tubing+bender+die+2+%2Caps%2C341&sr=8-1
Got same got bushings but not pressed in...
Where can I get does
Will it make a 180 bend?
@@thepeoplesmorgantownindian8383 yes. If you get a 180 degree die.
$850 now
I actually just checked the link in the description and it’s $220 and ready to ship.
@@TrailTime. oh thanks for checking. I just went on the swag website.
Not available again :(
Great vid, it’s been a while since I’ve been on a bender but I used to have a tub of white lithium grease and a brush to apply a litttle grease to the die, clamp and follower. This helps to keep them from premature failure! I might have to pick one of these up, thanks