How to install stop valve on pvc pipes as shown in the video will make the process of replacement or repair later easy and flexible! How do you see the idea of installing the valve on this pvc pipes ? Please leave your thoughts in this comment section! Thanks for watching !
Thank you for letting me know what you think about this! really great , I totally agree with what you said ! However, if it is installed like that, although it costs more to install, it will be effective in the future for the process of repairing and replacing the valve when it is broken? What do you think of this comment? Thanks for your enthusiasm!
@@hectorgarcia8691 Oh ! great for this! very happy that the video has brought you usefulness in real life! Wishing you and your family all the best and happiness! Please keep the good interaction! Thanks for your nice feedback!
Here in the US, if I was concerned about easy valve replacement, I would just use a Sharkbite valve. Otherwise, if replacement was necessary, I would just cut out a section of pipe and use cemented PVC couplers to connect a short stub on either side.
That is the way I assembled my 160' deep well pipe, sans valve, but with couplers between each 20' section of pipe. Continuous poly is usually used but pulling the pump was a lot easier with the couplers when you don't have a crane and winch. Your technique (with one coupler as noted below) is a useful approach to replacing or adding a valve.
thanks for watching ! you are so kind to leave me a comment about this! Hope the video will be useful to you and everyone! See you in other videos of the channel!
I'm Electronic and Electri Service Engineer . But ❓ I Like The Plumbing Work. Some Time I Fittings Water Pumps Plumber Works. Today I Got New Ideas. Once Again Thank You For Sharing..
You only need one disconnect coupling, this is because once the coupling is un-threaded, the valve can simple turn to spin off the male connection on the other side.
what do you mean it would spin?.. both union when facing each other goes in clockwise and the other side is counterclockwise.. to make it spin with water pressure you need that two union facing in both clockwise or counterclockwise direction.
I've been brainstorming how to install a 1 inch ball valve into a gravity fed pvc line from my spring fed water tank where it enters the house upstream from my water filter. No flex in the pipe so your suggestion is perfect! Plus, the valve is serviceable in the future without cutting remaining pvc again and again. Thanks!
Thank you for watching the video and leave me a comment! Glad you shared the same opinion! Wishing you and your family all the best and happiness! Looking forward to seeing your opinion in other videos on the channel! Thanks and good luck!
Use a single pvc push to fit (shark bite type or twist to lock) coupling on one side, glue the other threaded fitting direct. (only need one union or push fitting).
I have had on my mind to install a shut off valve in the 3/4" PVC water line coming into my house for sometime now. This video is exactly what I needed to see to get my valve installed. Will get the parts today. Thank you very much for this video.
Thanks for your feedback! I am very happy for this , it is great that the video has been valuable to you , hope you enjoy the other video content in the channel ! Looking forward to hearing from you in other video content! Thanks for watching .
Wellcome ! Thank you for watching and leave me a comment! Hope the video will be useful to you and everyone! Looking forward to seeing you in other video content on the channel!
Thank you for these good things , may God bless you always with peace and happiness ! Looking forward to your feedback for other videos on h channel! Always welcome to my channel! good luck.
Thank you for this great feedback! Wishing you and your family peace and happiness! Hope to see you in other videos on the channel! Thank you for your kindness and awesomeness!
It gets tight to fast by hand, and it seems 2 be cross threaded . A diy could cross thread it. And if u have a rubber gasket in you don't have to tape it, maybe one revolution.
That's doing it the hard way. Also unless the pvc is schedule 80, the pipe is for electrical work and not code approved for plumbing. Maybe things have changed since I retired after 45 years as a plumbing contractor.
why have 2 unions when you only need 1? better yet: 1) use a sharkbite shut off (the 2 unions will more than pay for it). or with the shutoff (threaded) shown 2) use a single sharkbite straight connect. 3) sharkbite Quick Connect Push to Connect/John Guest Speedfit Union fitting (these are made out of pex). If its its outdoor or irrigation, use an orbit PVC-Lock fitting (push on). All of these will be cheaper and easier than 2 unions and all will allow shut off to be removed if it fails.
2 things u forgot . when u cut the pipe u have to deburr it. And second thing u have to clean it with a PVC Cleaner before u get the glue on. These are two very important things.
When I apply PVC glue on both surfaces, I just pushed it in. I avoid twisting it because as the glue dries, any twisting action will create unevenness and air spaces which will cause leaks.
The usual problem here is when the teflon you put on both ends of the valve turned out to be insufficient. You turn on the water, and the teflon starts leaking. But you glued both ends already, so you have to repeat the process all over again and buy another set of fittings.
Thank you for leaving a comment! I agree with your thoughts! but in my opinion, using 2 joints will be easier to manipulate! How do you think about this?
It's exactly for no Plumber, it's not the correct way to install a valve, no body use two unions, more parts than can have a damage and not good because they have seal and thread and have more risk of f future leaks, looks nice and elaborate but not really professional 😊
great idea. I'm planing to install a temporary water line source and want to redesign it after finishing some renovation and this idea really help although its costly but its really efficient rather than cutting and buying new pipe and fittings and this video really fits for low pressure water lines
1. Only PVC valve (both end female socket type) will be just sufficient to replace. 2. At last you installed the valve diametrically opposite to that you saw in starting of video for correct direction of its lever. 3. Anyway, it is a nice video. 🎉
Thank you very much ! you are so kind to leave me a comment , hope you enjoy the content on other videos in my channel ! Thank you , wish you and your family always happy and successful !
Thank you ! I'm so glad to see you here! I'm glad to make you happy! Hope to see you in other video content on my channel! Thanks and have a good time!
❤ it's just amazing you are sharing your plumbing skills to assist people who never ever done any plumbing work which is really appreciated, sorry 4 some of the negative feedback in the comments section,have a great day
Thank ! In the process of creating content, I look forward to receiving your and everyone's evaluation, whether positive or negative, it is precious to me! Thank you for those comments! I look forward to receiving your feedback on other video content on the channel so that I can improve what is not on my channel! Thanks and good luck!
Thank you !I'm glad it was useful to you and everyone! Hope my other video content will make you satisfied! I look forward to seeing you in my other videos!
![YOU AIN’T SEEN NOTHING YET! // Solarballs // [Theia/Proto Earth] / [Moon/Earth]](http://i.ytimg.com/vi/eb4vHQ3NWrg/mqdefault.jpg)
How to install stop valve on pvc pipes as shown in the video will make the process of replacement or repair later easy and flexible! How do you see the idea of installing the valve on this pvc pipes ? Please leave your thoughts in this comment section! Thanks for watching !
Qààaà s CE CRee see see CR 2 we saw to
P
Welcome and Thank so much!
Kebanyakan sambungan coiii.....
hahaha ..huh costly
Correct idea but costly. Single Union can be sufficient
Thank you for letting me know what you think about this! really great , I totally agree with what you said ! However, if it is installed like that, although it costs more to install, it will be effective in the future for the process of repairing and replacing the valve when it is broken? What do you think of this comment? Thanks for your enthusiasm!
You just saved me 300 dollars that I was being charged by a plumber, thank you 😊
@@hectorgarcia8691 Oh ! great for this! very happy that the video has brought you usefulness in real life! Wishing you and your family all the best and happiness! Please keep the good interaction! Thanks for your nice feedback!
With a PVC shut valve..could save two couplers.
You know, there are pvc union valve thing, it combine those valve and union in a single thing..
Here in the US, if I was concerned about easy valve replacement, I would just use a Sharkbite valve. Otherwise, if replacement was necessary, I would just cut out a section of pipe and use cemented PVC couplers to connect a short stub on either side.
Thanks , sir!
Well, sharkbite doesn't fit pvc, it fits cpvc, copper and pex.
@@stevem1081thank you Steve for correcting this wanna be plumber. Saved me the trouble of dropping the hammer on him....
Single union can be sufficient , it's too much but idea is correct, thank you....
thank you so much, watching from Alaminos city Pangasinan Ph.
Welcome and Thank so much!
That is the way I assembled my 160' deep well pipe, sans valve, but with couplers between each 20' section of pipe. Continuous poly is usually used but pulling the pump was a lot easier with the couplers when you don't have a crane and winch. Your technique (with one coupler as noted below) is a useful approach to replacing or adding a valve.
thanks for watching ! you are so kind to leave me a comment about this! Hope the video will be useful to you and everyone! See you in other videos of the channel!
I'm Electronic and Electri Service Engineer . But ❓ I Like The Plumbing Work. Some Time I Fittings Water Pumps Plumber Works. Today I Got New Ideas. Once Again Thank You For Sharing..
nice. The advantage of this method is when it comes to change the ball valve..it makes it easier 👍
Thank you for watching and leaving a comment! I'm glad it was useful to you and everyone! Wishing you and your family peace and happiness!
Change a brass ball valve? 50 years from now. Plus not pvc, it poly
ball valves DO GO BAD. Got one on my irrigation system now. This would make it easier to fix. Thanks
And that would be once in a blue moon though 😂
You only need one disconnect coupling, this is because once the coupling is un-threaded, the valve can simple turn to spin off the male connection on the other side.
Thank you ! I will think about these! Thank you for watching and thanks for the feedback! wish you happy
what do you mean it would spin?.. both union when facing each other goes in clockwise and the other side is counterclockwise.. to make it spin with water pressure you need that two union facing in both clockwise or counterclockwise direction.
Avoid maximum joints, then only required one union!
Only one 🤔 isnt it better with two? Also arent those unions?
Thank you for showing this and very idea 💡 you r the best
Thanks you !
I've been brainstorming how to install a 1 inch ball valve into a gravity fed pvc line from my spring fed water tank where it enters the house upstream from my water filter. No flex in the pipe so your suggestion is perfect! Plus, the valve is serviceable in the future without cutting remaining pvc again and again. Thanks!
Thank you for watching the video and leave me a comment! Glad you shared the same opinion! Wishing you and your family all the best and happiness! Looking forward to seeing your opinion in other videos on the channel! Thanks and good luck!
Use a single pvc push to fit (shark bite type or twist to lock) coupling on one side, glue the other threaded fitting direct. (only need one union or push fitting).
Very convenient for disassembly
Thank you, I'm so happy for this! Hope to receive your feedback in other videos on the channel! have fun.
I have had on my mind to install a shut off valve in the 3/4" PVC water line coming into my house for sometime now. This video is exactly what I needed to see to get my valve installed. Will get the parts today. Thank you very much for this video.
Thanks for your feedback! I am very happy for this , it is great that the video has been valuable to you , hope you enjoy the other video content in the channel ! Looking forward to hearing from you in other video content! Thanks for watching .
Don't do it this way use pvc valve and a slip coupling
What a good idea to apply for...Thanks.
Wellcome ! Thank you for watching and leave me a comment! Hope the video will be useful to you and everyone! Looking forward to seeing you in other video content on the channel!
Appreciate💕 both you and your Shares Thank you
Thank you for these good things , may God bless you always with peace and happiness ! Looking forward to your feedback for other videos on h channel! Always welcome to my channel! good luck.
Thanks for your Idea WE can need that one day
Thank you ! I'm really happy for this! Hope to see your feedback for other video content on the channel! have fun.
I am a plumber and still watch this video ❤
Yess
I am a plumber from Ghana
Mantap...sangat bermanfaat.....
thanks you!
Nice idea, you can easily change the valve once broken.
Thank you for this great feedback! Wishing you and your family peace and happiness! Hope to see you in other videos on the channel! Thank you for your kindness and awesomeness!
Once broken, I just cut another one next to it. Same result but uglier. 😅
Thank you very much
Now u have 2 find where they sell it and name of it. Also 2 much thread tape can easily cross thread it when screwing on.
To much tape can cause it to split would only cross thread if you make it do so
Absolutely agree.
It gets tight to fast by hand, and it seems 2 be cross threaded . A diy could cross thread it. And if u have a rubber gasket in you don't have to tape it, maybe one revolution.
You deserve a hug right now
great for this! Thanks for your appreciation! Wishing you happiness and fun always!
Using conduit for water pipe looks like problem number one.
THANKS
My man said “Thanks” 🤣🤣🤣🤣 oh my goodness UA-cam is full with clickbait videos
That's doing it the hard way. Also unless the pvc is schedule 80, the pipe is for electrical work and not code approved for plumbing. Maybe things have changed since I retired after 45 years as a plumbing contractor.
Thanks sir! Each region will have different standards and practices! Sincere thanks for your feedback! Good health to you sir!
THANK YOU VERY GOOD AND FUN VIDEO!
THANKS MY FRIEND!
@@dailytricks6161 I Subscribed To Your Channel And Shared Your Videos. Thank You For Responding To My Comment. I'm Very Happy For That. Thank You !
why have 2 unions when you only need 1? better yet: 1) use a sharkbite shut off (the 2 unions will more than pay for it). or with the shutoff (threaded) shown 2) use a single sharkbite straight connect. 3) sharkbite Quick Connect Push to Connect/John Guest Speedfit Union fitting (these are made out of pex). If its its outdoor or irrigation, use an orbit PVC-Lock fitting (push on). All of these will be cheaper and easier than 2 unions and all will allow shut off to be removed if it fails.
Thanks for your information! I appreciate these very much!
Exactly. An idiot who should learn instead of making videos spewing nonsense.
Buen video.Gracias por compartir.👍🙋🇪🇦
Thanks
2 things u forgot . when u cut the pipe u have to deburr it. And second thing u have to clean it with a PVC Cleaner before u get the glue on. These are two very important things.
Thanks you , sir!
@franksengatti5499
Yeah maybe thats Luck, but i work with this Things almost every Day and these These Tipps are important
So the context is maintenance easy. Good video.
thanks you!
Why didn't you just add a few more plastic connectors just for the hell of it? Just to make the video a little longer and confusing.
thank you for watching and thank you for reminding this , this is awesome ! Wish you always cheerful and happy !
Wooow... very very amazing
Thanks you! Have Nice day
Most expensive valve installation ever!!! Why not just the valve???all you would need is one sch80 socket ball valve!!!
yes thank you for these reminders! Wish you always cheerful and happy !
Good information sir
thank you somuch ! have nice day!
When I apply PVC glue on both surfaces, I just pushed it in. I avoid twisting it because as the glue dries, any twisting action will create unevenness and air spaces which will cause leaks.
Thank you for this reminder! have fun!
Yups...twisting creates scratch gaps
Excellent 👌
The usual problem here is when the teflon you put on both ends of the valve turned out to be insufficient. You turn on the water, and the teflon starts leaking.
But you glued both ends already, so you have to repeat the process all over again and buy another set of fittings.
Thank you ! I will reconsider this issue ! have fun.
Smart notice 👍🏻 thanks.
Con una universal es suficiente.... Att.Menudito.
Awesome 💯👍
thanks
You're right about one thing I'm a plumber and I shouldn't have watched this😂😂😂
Thanks bro!😜😜
शाबाश भाई बहुत अच्छा धन्यवाद
You just made the connection more costly
Only a homeowner would do that.
thanks you! What is your suggestion?
spectacular ocean until you're officially captivate me...great
Wellcome ! Nice to see you here! Thanks and have a good time , hope to receive your comments for other content on the channel !
Why used many connector
Mantaf tq for infornation👍👍
thanks you!
You can only use one coupling two is not advisable
Thank you for leaving a comment! I agree with your thoughts! but in my opinion, using 2 joints will be easier to manipulate! How do you think about this?
Dude just cut it and glue it plenty of flex on that pipe
He's not a plumber either....
very creative and it worked for me
Thank you ! I am very happy to receive your noble deposit ! Wish you always happy and successful! Welcome to my channel, thank you for watching!
Much easier ways
thanks you!
Hay lắm ak.nhớ ra nhiều video nữa nhé
Thank you for watching and leave me a comment! Wish you success soon and always happy !
Gosh ! Just to fix a $10 valve you have spent twice as much. I would straight away cut the pipe and joined with a pair of joints
Nope, he bringing that valve home every sundown. Just to make sure no one can steal.
@@griffingrendel9911 😆
me too.....😅
Very good nice videos like ❤❤👍
thanks you!
Why use a brass valve with plastic pipe?
Mistaken installation of union union must gap around 10 cm. From the valve if pipe have more distance.
thanks!
Yes give a space so that easy to reinstalled .
The idea is not from a good plumber. Leaks can come from several points aside from being expensive.
Agreed - the extra fittings are a pointless over- complication. Why use a metal tap too?
Excellent method onday a client asked the same question. How to connect ball valve?
It's exactly for no Plumber, it's not the correct way to install a valve, no body use two unions, more parts than can have a damage and not good because they have seal and thread and have more risk of f future leaks, looks nice and elaborate but not really professional 😊
Thank sir! Thanks for your feedback! I will try to improve myself as well as the video content! Thanks and good health!
Good lesson tanks
thanks!
Wasting a lot of money sir, to save time and money just use connector period.
Thanks sir!
thank you for sharing😮
Thanks you and good luck! let's keep interacting together!
😂Overkill😂
great idea. I'm planing to install a temporary water line source and want to redesign it after finishing some renovation and this idea really help although its costly but its really efficient rather than cutting and buying new pipe and fittings and this video really fits for low pressure water lines
Seems like a very expensive and time-consuming process. I'll pass on this one.
Thanks for your feedback!
Good job sir
thanks you!
costly, redundant
Very useful for repair myself.
Not much of a trick.
Sweet :) , it is Such a pretty video
welcome and thank so much !
Overkill...no thanks..
Wonderful shot
welcome and thank so much !
to much time , for nothing,sorry...
thanks
Beautiful Videos 🍧
Thank you! Cheers!
Bad quality
Do you have any other good ideas?
than not? let me know about that !
1. Only PVC valve (both end female socket type) will be just sufficient to replace.
2. At last you installed the valve diametrically opposite to that you saw in starting of video for correct direction of its lever.
3. Anyway, it is a nice video.
🎉
Thanks for your comments , this is great for me ! Thank you and thank you for your compliments! Wishing you and your family peace and happiness!
Not practical...
Thanks for your feedback! We look forward to hearing your creative ideas! Hope you can help!
good job bro, keep it up
thank so much, my friend !
Jolie musique ET travail propre et merci encore 😂
great video bro
Welcome and thanks!
Good tricks for life
Thank you very much ! you are so kind to leave me a comment , hope you enjoy the content on other videos in my channel ! Thank you , wish you and your family always happy and successful !
Super buenas ideas
Thank so much
Excellent
thanks you for watching ! Hope to see your comments for other content on the channel! Thanks and have a nice day!
Enjoyed the finger pointing.
Hi
Hoy aprendí contigo 😮
great connection
thanks !
Great 👍👍👍👍
Thank you! Cheers!
thanks for the sharing. it's very necessary for me
Thank you ! I'm so glad to see you here! I'm glad to make you happy! Hope to see you in other video content on my channel! Thanks and have a good time!
I will try with these tips
Thanks and good luck! I'm glad you're satisfied!
Great job, man
Молодец,👍
welcome and thank so much !
i love you your idea
Welcome to my channel! It's a pleasure to receive your comments! Hope to see you in other videos! Thanks and have a good time!
People talking about adding two leak weak spots, big deal, if happens, just install new o rings.. Nice video Sir.
thank you , you are so kind to leave me these words of encouragement ! Have a nice day and full of energy!
I also put two 90 degree on both sides to take it off the wall... some might call it overkill, but I don't like the strain... never failed so far...
The purpose of using union in this TUT in next changing of stop valve you won't cut a piece of pipe. Nice idea.
thanks you!
❤ 👍 If the pipe on both side is full tight, then we have to break atleast 1 inch on wall to fit these fitting in straight..
❤ it's just amazing you are sharing your plumbing skills to assist people who never ever done any plumbing work which is really appreciated, sorry 4 some of the negative feedback in the comments section,have a great day
Thank ! In the process of creating content, I look forward to receiving your and everyone's evaluation, whether positive or negative, it is precious to me! Thank you for those comments! I look forward to receiving your feedback on other video content on the channel so that I can improve what is not on my channel! Thanks and good luck!
This is stupid in fact. See others for simpler.
Good 👍
thanks you! have good time 😆
Breathtaking 💖💖
welcome
Simple and useful tips
Thank you !I'm glad it was useful to you and everyone! Hope my other video content will make you satisfied! I look forward to seeing you in my other videos!
Very good idea
OMG😍,Awww💞 I love this
thank you ! thanks for liking
Ide cemerlang, salam kreatif
Thanks you so much, Have a good time !
Very good cogragulation.