@@JoshTolbertUrbana They just brought back their parametric EQ, it would probably be very handy for bass. It came yesterday so I don't know how it sounds yet. It seems like they get back ordered quickly.
@@themassacoustics264 Yeah, they seem to be back-ordered on that EQ pretty regularly! That one's on my short list to do, too. I did their older version of the analog chorus, and of course a green-Russian build of the lil beaver.
@@themassacoustics264 look at the weber,s . Build and upgrade. They make really nice speakers. I think they have gotten a a bad rap over the years. I want to do a princeton with dave allen tranny,s that would support 6v6,s at 22 watts or 6l6,s at 35 watts! My dream amp in head form and then mix and match cabs!!
Hey, Nice job on the video guys! I had a question, I'm building one with an MXR power supply and it has a wall wart type plug, is it necessary to keep that on there for some kind of voltage conversion or is it okay to cut it off and wire it directly to plug? I'm adding a built in power plug like what you have here, thanks! Dan the bass man
I just looked at the MXR power brick power supply and it looks like you'll have to leave the wall wart on there or you will fry your power supply.You could wire up the IEC cable like I did and then wire the wall wart after it under the board. Be careful I am not an expert on this and that's a whole lotta juice. There are a few other good vids out there that might help. Let me know how it turns out.
Hey, thanks alot for the reply, I kinda figured that out here but what I'm going to do is just wire an outlet under the board, plug the wall wart in and zip tie it to keep it in place. Dan
@@themassacoustics264 The Amish are awesome. Full(sized) pickup truck of scrap wood....$5. Bring a little Ford Ranger and catch hell for trying to still give him $5....:):):)
@@themassacoustics264 so, as talented as you both are. Can you do something femine like? Like needle and thread up a quilt, or something. I'm afraid you might cut off a finger with all these manly projects. 🤣
@@themassacoustics264 I'm using a Gibson Ga30rv Super Goldtone, it looked like in one of your stays at the Tuna you were using one as well or maybe a 60?
The name of your next rekkid should be Uncle Dave's Woodpile. The cover pic is a pile of guitars stacked up like firewood, something like: images2.imgbox.com/f1/a9/BzSIUaOD_o.jpg
You can never have enough good wood at any time of the day, gets the project started off right and your good to go.
I would totally buy a pedalboard from you guys if you made more than one!
Hadn't heard of BYOC till today, always on the hunt for interesting pedals. thanks!
They've got a bunch of good effects. We're probably going to do a few kit build videos of them in the near future.
cheers
They make good stuff. I've built a few of their pedals for use with bass.
@@JoshTolbertUrbana They just brought back their parametric EQ, it would probably be very handy for bass. It came yesterday so I don't know how it sounds yet. It seems like they get back ordered quickly.
@@themassacoustics264 Yeah, they seem to be back-ordered on that EQ pretty regularly! That one's on my short list to do, too. I did their older version of the analog chorus, and of course a green-Russian build of the lil beaver.
Cool build
Nice!!👍🏼
“Turn those holes into slots.”
Who doesn't love a good slot?
THE MASSACOUSTICS personally, I work better with a good dowel rod or two. But hey, to each his own. Whatever gets the project finished.
You guys should do an amp project!!
Maybe we can do a mojo kit early next year.
@@themassacoustics264 look at the weber,s . Build and upgrade. They make really nice speakers. I think they have gotten a a bad rap over the years. I want to do a princeton with dave allen tranny,s that would support 6v6,s at 22 watts or 6l6,s at 35 watts! My dream amp in head form and then mix and match cabs!!
nice!
how do you attach the pedals to the board
🧡
Hey, Nice job on the video guys! I had a question, I'm building one with an MXR power supply and it has a wall wart type plug, is it necessary to keep that on there for some kind of voltage conversion or is it okay to cut it off and wire it directly to plug? I'm adding a built in power plug like what you have here, thanks! Dan the bass man
I just looked at the MXR power brick power supply and it looks like you'll have to leave the wall wart on there or you will fry your power supply.You could wire up the IEC cable like I did and then wire the wall wart after it under the board. Be careful I am not an expert on this and that's a whole lotta juice. There are a few other good vids out there that might help. Let me know how it turns out.
Hey, thanks alot for the reply, I kinda figured that out here but what I'm going to do is just wire an outlet under the board, plug the wall wart in and zip tie it to keep it in place. Dan
HOLA, PARA QUE SON ESOS 2 DISPOSITIVOS QUE ESTAN A LADO DE LA AC?
Uncle Dave’s wood pile has to be getting small
I was gonna say something very similar. Uncle Dave's wood pile has been getting lots of use.
He's got an Amish friend who just wont stop cutting up logs...we got a long way to go
@@themassacoustics264 The Amish are awesome. Full(sized) pickup truck of scrap wood....$5. Bring a little Ford Ranger and catch hell for trying to still give him $5....:):):)
@@themassacoustics264 so, as talented as you both are. Can you do something femine like? Like needle and thread up a quilt, or something. I'm afraid you might cut off a finger with all these manly projects. 🤣
Chainsaw vids on the way!
New video please....."What's on your pedal board?"
Good idea. it's forever changing though.
@@themassacoustics264 I'm using a Gibson Ga30rv Super Goldtone, it looked like in one of your stays at the Tuna you were using one as well or maybe a 60?
The name of your next rekkid should be Uncle Dave's Woodpile. The cover pic is a pile of guitars stacked up like firewood, something like: images2.imgbox.com/f1/a9/BzSIUaOD_o.jpg