Building my 2019 RM250 in 15 Minutes!!!
Вставка
- Опубліковано 2 жов 2024
- As you all know. I purchased a 2006 Suzuki RM250 off facebook marketplace about 9 months ago now. This video shows from start to finish the whole build process and what it takes to build a bike. This video only shows the main parts and highlights of the build so sit back and enjoy the build in one 15 minute video.
Like-Comment-Subscribe-Share
Instagram: @motovated_nz
Instagram: / motovated_nz
Music: Dreams-Joakim Karud
Love Mode-Joakim Karud
10K-Joakim Karud
Balloons-Joakim Karud
I'll Be There-Joakim Karud
Not 4 Nothin-Joakim Karud
I’m very impressed! I’m 28 years old and wouldn’t even know where to start! Good job my man
Use your brain.
@Matthew721 79 pretty ironic I wrote that two months ago nd since then I got hired as a mechanic at a big time scrap yard. Even though I have no experience they are training me. So it will come in handy when I want to build a bike someday
@@15subarusti59 keep working brother
@@AshrafAshraf-zx6vz thanks man. Right on
@@AshrafAshraf-zx6vz sold my 2011 Dodge Ram Big Horn yesterday, and am buying a 2011 WRX STI with a fully built closed deck EJ257 (closed deck means the coolant passages around the cylinders are filled with aluminum for reinforcement and then redrilled for coolant flow so you can make 600whp+ without blowing a head gasket). You give up some cooling but that’s what gauges are for. I’m pretty excited, the car was built at a Subaru garage near my house, so ya I’m amped to get this thing. Getting a good deal at $13,500 the guy showed me over $15,000 in receipts for the motor alone he bought a brand new block and everything. Cheers bro
No way you built that in 15 minutes
Haha imagine if it was that simple.
No way you can be such an stupid!
15 minutes to wash the seat.
It's true 😔
rm250’s are like legendary to me idk why but i love them
Yea they are a really nice bike. Love them too
Josh Frank righttt😂
I had exact same bike,I wished it look that nice
That’s the nicest rm250 I’ve ever seen great job man!!!
Thanks alot, Cheers for supporting the build.
This bike is so sick check mine out i made a couple videos on it but I wanna do the same thing u did for my 07 crf450
Sick build, bike sounds and looks awesome!!
Cheers mate
Superrrr. And a great bike, better than a cr 250 kx250.
Good job la moto et magnifique continue comme ça les gas . Et salutations de la France
Hey nice job. It looked so good.
Best regards from Germany 💪
Well done. I have a 2002 model that Id like to do a mid 80s job on it.
Works pipe looks much much better! 👍
Great job, man. Had an 01 myself. Still the best bike I ever had. 51 tooth rear sprocket with fmf gold fatty is a great combo. If you didn't upgrade the clutch from stock, I would recommend. The stock one is pretty weak and slips.
If that's a 2019 mode it's had a bad previous life
Its a 2006 but he built it in 2019 i guess
Thanks for the info it looked a bit older that's what I meant
@@lloydisaacs415 yeah i was also like it cant be a 2019 then checked the description
Mostly cause a 2019 rm250 doesnt exists or id have one
Excellent work 🙌
That was fun to watch, nice work brotha, she looks amazing!
Thanks, glad you enjoyed it.
I have a question did your polisport restyled plastics just bolt right up or did you need something else to make it fit I have a 04 rm 250
Hey, it just bolts straight up. Check out the video where I install the new plastics and graphics. Think it is part 15. Hope this helps.
One of the best restoration projects I have seen. Your skills and care made one amazing looking bike. Top job👍
Thanks alot bro. Much appreciated. 🤙🤙
MotoVated NZ I much appreciate you posting it on you tube. Best of luck to you😊
I tried putting this restyle kit on my 01 rm250 and the rear fender looked weird as shit. Your bike looks sweet!!
Yea I have heard that some have issues. Mine seemed to work fine. Thanks for the support.
Oh shit...nicely done!!!
Cheers man
Excellent work on this RM250 Looks Fantastic 💛
Never thought a bike could look this good 😳
Some people do not realize the amount of time and knowdlege is to put engine apart and back up.
I remember when I was 14 and my cousin 17 we put apart my YZ80 and made full general on it...took us 2 days to do everything but we made it and I was kinda proud on us.Obviously if my cousin wasn’t near we would never be able to do this,he was mechanic...me more just helper and observer lol.
Excelent job my friend,admire real skilled mechanics at work!
That's better than a brand new the year model really nice hand made or put together anyway
if i rebuild my dirt bike like that i'd have 11 leftover parts
I have an rm 250 I did something like you did but that’s far more better
Vonderful pörfekt 🧿👍🙏☺️👋🧿👍🧿🧿🧿🧿🙏🙏🙏👍🙏👍☺️☺️ harika bravooo mükemmellll
Bella moto, bel lavoro. 👍🏻👍🏻👍🏻
Un saluto dall'Italia. 👍🏻🇮🇹🖐️
2 Strokes is better...
I'm building a rm 250 as well your bike is flawless man!
Hey class bike. What is the name of the colour of gold you done your rims in? I'm looking to do my 04 in the same.
Hey, they aren't actually gold. They are a anodized yellow. So yellow is the color to ask for. Cheers🤙
here before 100k
What was the total price for the rebuild?
If you have anything like this lying around..can you ship to India? 😀
Amazing build. Bike looks awesome! It looks like an amazing machine. Great job!
Nice..
Dammm! I am just starting the restoration of my 2007 RM, have you sanded and painted all the parts or they brand new? congratulations on your excellent job from france !
Majority was new. Frame was powder coated along with a few other parts. Thanks heaps for the support.
love it great video I subbed
Thanks man, much appreciated.
Nice...
Credit to you mate. It came up absolutely beautiful, congratulations on your bike!
Hermosa increíble!!
Just a few questions
- How do you get those parts so clean?
- Did you do anything to restore compression amount and if so, what did you do?
- Do you think there is a profit margin from your work?
-Vapor blasting.
-New piston and crank, new reeds and freshly renickasiled cylinder.
- To this scale not really unless you are building full blown race bike for a professional company or rider(s)
@@motorvatednz7432 thanks!
Wish i had half of this young man's talent. And what a beautiful bike.
Cioffkfkdfkfkrfkfifkrieitlrrlr😎
Great job brotha, love the graphics 👍 Check out my 1988 Suzuki RM250 Barn Find.
Awesome 👌 job you've done buddy !! I have always been a Suzuki fan always will too !! I wish one day i can have a sick ass RM 250 like this one, one day. Well done ✔
El sonido ,el olor a humo, la potencia de los motores 2t sonsravillosos te felicito quedó hermosísima saludos desde cali Colombia ☺️☺️☺️☺️
You may have this imma have to look after this video, but if u ever do another bottom end do a whole video on it, you made it look so easy
Hey bro. I split the engine rebuild up in to three parts. Go check it out.
This bike is so sick check mine out i made a couple videos on it but I wanna do the same thing u did for my 07 crf450
Sick, And its in nz, cheers From dunedin
Lol I’m from south Auckland
3:51 his finger timed with sound
Haha never realised. Good spotting
@@motorvatednz7432 I myself ride a 125 2008 suzuki, Suzuki rocks!
That was an awesome coincidence lol
Haha didn’t see that till now 😂😂
Trippy
How do you know what to do? Im going to take small gass engines next year of high school when everything goes back to normal but would that help? Also how much did it cost to rebuild?
Yea mate of course it would help. Depending on the engine its obviously different but will help. After time you just build up knowledge.
MotoVated NZ thanks man, I heard that 2 strokes were cheaper and easier to repair is this true? Also how did you learn to do this?
@@jonathanesqueda3452 yes that true. Because they have less moving parts, researching and just doing it is how I learned.
@@motorvatednz7432 thanks again dude, knowing how to rebuild a dirt bike is one of my dreams and one day i'll know how.
Only Suzuki 💪🏼❤
That thing was naasssty at first, great job man looks great, doesn't even look like the same bike!! Wow!
Yes it was. Thanks alot
I have a question what premix are you running ? I'm new to 2 strokes and I have a 97 cr250 and people say run a 32:1 but it doesn't really sound like other cr250s I heard 40:1 is also good but like I said I'm new to 2 strokes so I don't know
Gratulálok neked nagyon ügyes vagy ez a moci nagyon gyönyörű lett
very good job😍
I love 2 strokes. How much power gain does the reed valve offer??
Its hard to tell without running it up on the dyno. I feel like It delivers the power smoother.👍👍
Hello bro. Awesome build.
In 1:52 Can you tell me this spray??
Where Can I buy?
Thank you😉👍
Thanks mate, it is compressed air in a can used for dusting computes down, once turned upside down it comes out from the nozzle as like dry ice, extremely cold. I believe its proper name is an air duster. You can get it from any office/stationary shop. Hope this helps. 👍
Compressed air it’s nothing special get it at any hardware store
There is no such thing as a 2019 rm250 suzuki stoped making 2 strokes in 2008 unless the bike is based off of a 2019 rmz250 or rmz450
I subbed definitely wanna see more builds
Thanks man, definitely will be more builds.
Where and what's the brand for that engine sprocket cover that you got I been trying to buy it but can't find it and Damn that bike looks sexy
Motoxparts search them up. 🤙🤙
I have the 1982 Suzuki rm 150
That thing was so clapped you saved a life. Thank you
Where did you learn how to do that ? Got any advice like did you get the service manual and just follow it ? How did rebuild the whole bike
Waow ! very beautiful 👍🏼 Nice Job
Cheers bro
How did you get all engine parts (all the covers etc) so clean?
Vapour blastimg
You could really make a killing here in California where most bikes made after 2002 can't be used on federal, state or county parks between May or April (depending on the park) though Nov. You could sell the heck out of 2002 and older bikes that look like 2019 bike. You would get tired of getting stopped by the rangers though!
Excelente video como reviven esa Suzuki
That was fucking great! You kidding me?
hate suzuki but nice looking bike for sure
What rebuild kit did you go with? And do you run straight pump gas in your bike? recently bought a 04rm250 that needs a bottom end and I been reading a lot that they need a 50/50 mix with race gas
Hey, the rebuild kit I used is from a place called Motoxparts. They are only available in NZ and AU. They are reasonably cheap bit I haven't had an issue with them. Have used it In multiple bikes now. I run 98 pump gas at a mix of 40:1. Hope this helps. Cheers 🤙
Loving that dr trim seat have one on my rmz450
One of the nicest builds I've ever seen!!
Cioerkrlrtltrlrletoeoh😎
Dkfkggkgl
Sick build man! I've got the same bike and did a lot of the same work, just haven't done the bottom end... yet. What reed block did you end up putting in there? I've modded mine for single track with Fly Wheel Weight, 18" Rear, Gnarly Pipe and Lectron Carb. I prefer the old school plastics still, the Polisports are a little too angular for my liking. Sweet 2 stroke smoke!
Nice work man. Thanks for the support👍
@@motorvatednz7432 What was the final reed block you installed?
@@marchanselman it was the Boyessen RAD Valve.
Great work bro', greetings fro France ; )
Please help! My RM 85 was just rebuilt and still doesn’t start and has no compression
Hey, if it has had a full rebuild including crank, piston, cylinder replate etc. It is unusual to have no compression. You most likely have an air leak/crack/hole some where and that is where the combustion is going not allowing it to run or build up compression. It also could be like a head gasket or cylinder gasket and is not sealing correctly. I would pull the top end off and check the crank and inspect the cylinder, piston and gaskets. Hope this helps. Motovated NZ 👍
MotoVated NZ It was just a top end rebuild
@@EuroTrashTV. Well in that case then, there is a possibility it is your crank that is not allowing it to run. The Con-rod bearing will be worn and the rod will have up and down play. Could also be your crank seals. You're going to have to pull the whole engine apart probably and see whats going on. Cheers 👍
Hi, where did the graphics come from and seat cover? Im purchasing a 2006 RM 250 soon next week, will be purchasing the polisport plastics and hopefully this graphics kit too. Looks good to me. Thanks
Got the seat cover from DR Trim and graphics for Mac Media.
You gave some inspiration! Yellow gold and black 🖤💛
Nice!!! I'd like to know if anyone does that is South San Diego, I just took my bike to a "Mechanic" and I'm disappointed. It's going to be hard for me to trust another one. Bad ass video bro!
Thanks man, shit that sucks. I'm sure there is!!
I'm very impressive about your young age and your project to rebuild completly your motocross 2 stroke 250cm3 sorry for my bad english. Really great job Man
Thanks heaps, much appreciated.
good
nice job,
that smile, when it runs, feel you bro :)
Great looking bike man!! I miss my '92 so much
Thanks bro
Hey man the forks on bike are they the stock forks but had them re-coated or something as im doing a build of a rm125 2003 model and want to make the forks look mint like yours so what is the trick to getting forks like that without buying a brand new set??
Hey mate, they are the stock forks. I had the upper fork tubes vapour blasted then anodized gold. I then fully rebuilt them with new seals and bushes. Since they are Showa forks and i wanted to protect the tubes from roost chips. I put the Showa decals on them plus they looks sick.
The link below will take you to the suspension video and will give you a better understanding of what i did.
Cheers.
ua-cam.com/video/B8Q5Fn2w2og/v-deo.html
What plastic you used. I think is the other motorcycle. Please let me know and you do a crear job.💪
Hey I used the polisport restyle kit
oh man you re a hero reviving a two stroke. Greetins from two stroke rider.
Thanks man
What year plastics did you use on the bike..nice job
Fuckin mint man cleannnnnnnnnnn bike lol i wouldnt even want to ride it after all that lol
Should have gone with black wheels.
Thought about it. My new 08 RM250 will have black wheels.
MotoVated NZ I dig the gold, but with all the yellow, it’s just too much. I’m looking forward to seeing the new one.
Fair enough. Ever since I was a wipper snapper. Seeing the factory Suzuki bikes with yellow rims. Had to give it a try. In person, they were also more yellow than gold. I cant wait either. 👍
Didn't know I had already watched this but watched again after 3 whole years and still amazed!
Awesome build. Sorry if I'm so brutally impolite, but how much does a job like this set you back?
Thanks bro. I made a whole video on just that. Go check it out.
13:05 that smile speaks for itself :D
Such a sweet build. How much did it cost in total?
Thanks man, I've made a whole video, it's titled How much did my RM250 cost to build? Go check it out
How much did it cost you in parts (including graphics n such) I’d assume $2000 right?
Just shy of $9,500nzd including buying the bike. Check out the "build breakdown" on it for full parts and prices.
Where did you get the graphics
Excellent 💪💪😎😎
Ik 100 ppl have said it, but damn that thing is nice!
Wow really. Really Really beautiful. Dirt bike really really really beautiful 👍👍👍👍👍👍👍 And great 👍 video.
Cheers mate
I saw this exact bike on Facebook marketplace just the other day. fella was after $10k
Yea, I sold it to a kid. Then he sold to that guy. He needed to buy a tractor so he is selling it. I sold it for 8k amd some how it's gone up in value. Haha. 👍
Best rm that I’ve see great job men
@6:46 straight thought those where fmic's. Oh was like ohhh turbo? Lol coming over from the car world
Haha I wish
Just kinda weird how there’s no graphics on the bike the first time u started it threw me off a lil.
haha yea i started it before i put the graphics on.