Wood Wick Testing hack - This easy trick will save you materials and money
Вставка
- Опубліковано 21 січ 2021
- This video is a easy trick you can use to test wooden wick with one vessel. This method saves you money on materials ( wax & fragrance oil) This hack is for a quick one hour burn test. I always run a full wick burn test once I've chosen my wick.
My Etsy Shop - www.etsy.com/listing/92651519...
Candle making supplies-
woodenwickco sample wick kit - woodenwick.com/collections/sh...
heat gun - amzn.to/39SViy0
464 - amzn.to/3o95sRd
wax pot - amzn.to/3hG1hK3
candle making pouring pot- amzn.to/34oz0RY
cooking thermometer- amzn.to/3jtHC05
Infrared Thermometer- amzn.to/2SoXRQg
eco-friendly honeycomb packing - amzn.to/2Y7gNFM
shipping boxes 6x6x6- amzn.to/2Gzbzxf - Навчання та стиль
Wow, why didn’t I think of this method of not fully preparing wicks in the pour. You’re a genius. What a time saver, and materials. Thank you!
You should do at least 2 full burns, to be able to decide if the wick isn't the right one for your jar. But the best is to burn full candle. Then, you will know how long it takes to get full melt pool, how is the hot throw, does tunnel, etc. 1h is nothing! With my wicks I don't get full melt pool until sometimes to 2-3 burn. Later on, when jar gets hotter, all wax gets melted and going down nicely.. and then I get many hours from one jar. Never decide after 1h burn.. Try again, with your wicks, but have at least 2 burns. And by looking, I would choose the second wick.
Thanks love ! I don't know about you but the wick process feel the most daunting . I appreciate your input though :)
@@CovetAlchemyCandles Yes, i think exactly the same. It's a very long process. Wasting so much wax, fragrance oil... £££ until we find "the one". But I never give up until at least I burn 2-3 times with same wick. They behave so differently every time, especially the wood wick, that's why you need more time with one. One day they burn nicely, another huge flame! But I can't make up my mind after 1h burn. Always give more time. Xxx
For conventional wick, this is especially true when using coconut wax blends. There doesn't need to be a full melt pool because the hang up wax will melt down when the wick reaches half way down the jar. For soy blends, there should be a full melt pool, unless the soy blend is super soft and behaves like coconut wax. As far as wooden wicks, I would assume the same principal applies.
Very very very helpful. THANK YOU ❤
I wish I have watched this sooner lol. Thank you for this :)
Glad it was helpful!
Thank you so much for this
Wow! Thank you for the idea! I wasted a lot of money all this time!!!!
Your voice is very soothing. I am curious what diameter is that vessel because I though we would achieve the full melt pool after let's say 3 hrs if your vessel is 3" but in this you discarded 2 wicks because of the results after only one hour. Thank you for making a video of this!
This is so informative. I’ve been wasting so much wax AND wicks making full candles with fragrant oils! I recently switched to Makesy (The wooden wick co) virgin coconut soy and cannot figure out the appropriate wick! Omg I feel like an idiot. Thank you so much for this awesome video!!
No girl, I was doing the same thing! Of course, it doesn't work with some of the harder waxes, but with the wood wicks and softer wax blends, it has truly been a game changer. I'm so happy to hear that this helped.
@@CovetAlchemyCandles I used their wick guide and ended up w the wrong wick size (flames too high). They told me that the wick size I have with the diameter of the tins I used, it would work perfectly for soy wax (I have about 4lbs left). I tried it and it will not stay lit. So I had to place an order for a new wick size (according to customer service). We shall see how it turns out! Thank you for all your help!! ♥️
Thank you dear so much 🙏💕🙏💕🙏💕🙏💕 you are an angel 🌹 this was really a big help for me 🙏🌹
You are so welcome and thank you for the sweet note
I love BeScented wicks 2 different colored work 1" and 1/2" for double wicking I find price is good for me great I fo, thank you
Can you re use/trim the burned part of the wick & use them to test a different vessel:fragrance instead of clipping another 1inch or two off?
My girl and I have 3.5 diameter tins. We used double booster wicks and it worked perfectly. I think since the last test were non-booster that’s why they didn’t reach the sides. We also pointed the booster part outwards. Also, we had tried one booster wick alone but that didn’t work. And.. you can either separate them or put the two wicks together. But I find it harder to have both them fit in one metal piece.
That's awesome! It takes a lot of patience, ingenuity and tons of testing. Thanks for sharing
Thanks for sharing!! What size were your double booster wicks for your 3.5 diameter tins? Thank you!!
Very niceeee😊
Thank you! Cheers!
If you have reached a full melt pool in one hour, then the wick is too big. I would have used the second one you tried. Slow burn is better than a quick burn. Three- four hours is sufficient time to reach full melt pool. Not one hour.
But who keeps a candle lit that long each time to avoid tunneling or faffing to fix wax memory. I maybe have my candles lit one or two hours
@@MissGlassButterfly I use mine 4/6h each time helps me write. Guess it differs depending on the person 😊
@@MissGlassButterfly candle makers are supposed to sell safe candles and if the wick throws off too much heat, that candle is now unsafe. So many people leave their candles burning all day and a candle that hot can burn their houses down
What are the reasons why a slow burn is better? Im having trouble deciding because in my vessel i used a .5 and it was good, good HT slower burn but residue was left on the sides despite it being lit for 7 hours(power burn). Wicked up to .625 and now it has a nice even melt pool no residue on the sides but does get to the rim within 1 hour 30 min what do tou think?
@@regilinecandles1548 I just think the faster it burns, the vessel can get extremely hot if the melt pool is very deep, also if it's burning too hot, you'll get sooting and mushroom tops and the flame can look too aggressive but having wax build up on the sides after 7 hours doesn't seem to be the right wicks? Have you tried putting two wicks in to help the distribution of the melt pool? I double wick my vessels which are 8cm in diameter and use Pro Wicks HTP62 and i get great melt pools in that 4 hour window. I may have slight build up of wax after the first 4 hour burn but it eventually catches up after each burn. Hope this helps :)
what type of wax did you use for this tutorial- that helps me to know which wicks to buy based on type of wax used. Thanks in advance
I used coconut/soy wax from @woodenwickco
Great video, I use the same wax did you let your wax cure before you tested the wick if so how long
Thanks so much ! I let it set up ,but don't wait the 2 or so weeks to cure. I might be wrong, but I think that is more so for fragrance . Kind Regards !
I love this but I use paraffin wax and I feel that the fragrance load may be altering the way my candle burn; plus I use tin cans from dream vessels. However I'm going to lower the fragrance load and try this method in the morning and come back with an update!
Thanks for sharing! Do share, I'm sure we have a some paraffin wax candle makers that would love to hear your feedback.
Any lunch Diamond? I also use parrafin wax and dream vessels. My tin is at almost 4’. Having a hard time finding wooden wicks
I’ve been testing out some wooden wicks, is it normal for it to have small sparks around the flame?
tiny sparks are normal. It's important to keep the wood wick dry, moisture can cause and increased sparking.
@@CovetAlchemyCandles Thank you!
the problem I'm having is keeping my wick on. any tricks with that?
What to do to make wicks more flammable? I bought some wooden wicks but they barely lit...
the thickness and size of the wick may not be the right fit for the diameter of the jar you are working with. Also, sometimes too much fragrance oil can clog the wick as well.
Hi, i tried this method, howver the wicks would not stay lit. Any suggestions? Thank you.
hummm.... okay lets think .... 1. are you letting the wax cool and harden up all the way? 2. Are you giving the wick enough height? 1/8 to 1/4 inches ? 3. It may be too thin or not wide enough. Start there, and if that doesn't answer it, this trick might not be the way to test. Best of luck!!!
How big was your container in diameter?
Hello there, sorry about the delay in my response. This is a Nordic Ceramic Tumblers from @candlescience and it says on the website that the interior diameter is 3 inches. (side note) Love this vessel !
What is your height for your wick? Is it a 5" (127 mn)?
You've got it ! pre-cut 5 " in height.
@@CovetAlchemyCandles thank you for the response!
My coconut soy wax is pulling away from the wooden wicks slightly. How do I fix this issue?
Have you tried warming up your vessels slightly or pouring your wax at a higher temp?
@@CovetAlchemyCandles I have not tried heating up the vessels! I’ll try that for sure! Thank you so much.
@@ashleyartisancreates absolutely!! Check back and let me know what happens 😊
What vessel is this?
Aura Vessel from @woodenwickco or I think it's @makesy now
I pull my wicks out with a needle nose pliers.
That is the better/safer way to go. The wax doesn't concern me as much as the wick. Thank you :)
If you're in need of personalized cards for your wooden wick candles' upkeep or gratitude, look no further. I provide tailor-made cards to meet your specific needs and preferences. ☺