Stihl FS45 hard starting and servicing
Вставка
- Опубліковано 13 вер 2022
- This stihl trimmer/weed whacker was hard to start and would hesitate at full throttle. Even adjusting the carb made no difference.
"Stihl FS45 won't start: Troubleshooting guide"
"How to fix Stihl FS45 trimmer that won't start"
"DIY Stihl FS45 trimmer troubleshooting"
"Stihl weed eater won't start: Solutions and fixes"
"Step-by-step guide: Troubleshooting Stihl FS45 starting issues"
"Stihl FS45 trimmer won't start after winter: Tips and tricks"
"Common reasons why Stihl FS45 won't start"
"Stihl trimmer starting problems: Easy troubleshooting"
"Fixing Stihl FS45 starting issues: Quick solutions"
"Stihl FS45 won't stay running: Troubleshooting tips"
"Stihl string trimmer won't rev: Troubleshooting guide"
"How to fix Stihl trimmer that won't rev"
"DIY Stihl string trimmer troubleshooting"
"Stihl weed eater won't rev: Solutions and fixes"
"Step-by-step guide: Troubleshooting Stihl trimmer revving issues"
"Stihl trimmer won't rev up: Tips and tricks"
"Common reasons why Stihl trimmer won't rev"
"Stihl string trimmer revving problems: Easy troubleshooting"
"Fixing Stihl trimmer revving issues: Quick solutions"
"Stihl trimmer won't accelerate: Troubleshooting tips"
This video is intended for informational and educational purposes only. I want to stress the importance of safety when working with tools. Always exercise caution and follow proper safety guidelines when handling tools or attempting any repairs. The methods and techniques demonstrated in this video are performed by a trained individual with experience. However, it is crucial to note that there is always some level of risk involved when working with tools and machinery.
If you're unsure about any aspect of a repair or don't have the necessary experience, it's strongly recommended that you seek professional advice or assistance. Attempting repairs without proper knowledge can be dangerous and may result in injury or damage to tools and equipment.
By watching and following the instructions in this video, you do so at your own risk. The creator of this video and any associated parties cannot be held responsible for any injuries, accidents, or damages that may occur as a result of your actions. Prioritize your safety and that of others around you when working with tools."
This disclosure makes it clear to your viewers that they should prioritize safety and exercise caution when attempting any repairs and that they assume any risk involved in doing so.
STIHL FS55R FS55 FS55RC FS55C FS55CE FS55T FS55Z FS55CEZ FS55CEDZ FS55DZ FS55RCE FS55RCE-DZ FS55RCE-Z FS55R-DZ FS55R-Z trimmer / brushcutter
Compatible with STIHL FS38 FS45 FS46 FS45C FS45L FS46C FS38Z FS45CE FS46CE FS45CE-DZ FS45CEZ FS45DZ FS45Z FS46CEZ FS46DZ FS46Z trimmer / brushcutte
Compatible with STIHL FC55 HS45 HL45 HL45Z HL45DZ hedge trimmer; Compatible with STIHL KM55 KM55C KM55R KM55RC KM55RCE
Briggs and Stratton, Honda, Chinese motor. MTD yardman yard machines cub cadet law boy toro ariens craftsman Subaru Murray Kohler Kawasaki John Deere snapper Troy bilt brute - Навчання та стиль
Thank you so much for sharing. I bought a FS 45 at a consignment store for 40 bucks. After taking it apart the same way you did in the video, I found out that the arrestor was plugged and the primer bulb was cracked. I also gave it a new filter and a new spark plug and it worked like new when I fired it up! Not a bad find for $40 and I learned a lot while working on it!
Glad I could help. Thanks for commenting!
The Stihl FS 45 is a very durable machine. I've been using it for 21 years and it's still good.
Thanks for your comment!
thanks for sharing.
I noticed a few times when you were hard to hear...perhaps an exteral mic could help...but I understand you have to walk before you run. This was a good video for the most part. (I know...I know...I shouldn't say anything because I'm not making videos on here...but you don't have to be able to play an instrument to know the music you like...lol) Please keep making videos and get your channel built.
Cheers from New Brunswick, Canada...eh.
Just started using a mic. Perhaps I need to put it closer to my mouth haha. Thanks for the tip, the support and for watching!
Nice job welcome
Thanks!
Good vid. You say your just getting started ? Having watched a few channels, I could suggest a bit more detail on the whys and wherefores. I knew nothing about small engines before I started youtube university. Every bit helps. Thanks. Judging by your shop and watching you work you know lots.
Thanks for the suggestions! I feel like I’m getting a little better on the video making. I’ll think adding more detail would be beneficial and maybe more entertaining. I’ll see what I can do going forward
Mine never started at all from day 1 . Other people could not start it either . There were faulty models back when I bought mine . I threw it aside in frustration and bought a Honda .
Out of curiosity I took it back to Stihl just after the warranty had expired and they charged $240 to fix it even though they new they had faulty production and knew it had never worked and never started . The motor runs good now but it has other issues so I don't use it much .
That’s odd. Sounds like it had bad crank seals or something. Either that or a cylinder issue. I’ve had really good luck with stihl but I’m sure there’s always a few that just aren’t right. Thanks for sharing.
NGL, I had anxiety when you said diaphragm first and gasket second on the metering side of the carburetor. It's always gasket then diaphragm on that side. Pump side is diaphragm then gasket. This isn't a dig, just advice for anyone who wants it. I've run into a bunch of carb's with reversed and upside down metering diaphragms.
Good call. After I posted it I realized the mistake. Hopefully doesn’t scree anyone up. Thanks!
Subscribed :)
Nice work, learned some stuff.
Thank you! Cheers!
Could you share the link for the parts? Thanks man great job!
To order an aftermarket use this site or similar sites. Google search fs45 carb rebuild kit. To get a kit from stihl, you would have to go to local ace hardware.
Hicello Carburetor Rebuild Kit for STIHL FS45 FS46 FS75 FS80 FS85 HT70 HT75 Zama C1Q-S63 a.co/d/0qDvRRa
whats the spark plug gap sopposed yo be?
.02 in or 5mm
You didn't show anything.
Sorry about that. Didn’t know how to edit back then. Hope you got some value anywsy