I have had flat tiles sliding out of place twice in the last 4 years. Are there some tiles that do not require nails? The house is only 4 years old....
Some Tiles use adhesive to stay in place, that is usually done in hurricane areas. Some tiles use a wire hook type fastening method. Regardless it should be fastened somehow; nail, adhesive or another system.
Do you typically prefer installing tiles with or without battens?
Do you have to install tile with buttons?
Doesn’t rain het inbetween the gaps?
Yes, that is why the underlayment and flashing is most important.
We have a flat roof, wanted to know if it be posible to use non-slip tile on the roof, the roof its solid cement.
I’m not sure on what you mean by non slip tiles. I’m assuming you’re not in the USA , I would recommend consulting with local builders to find out
What size length galvanized roof nails to use on concrete roof tile 3/4” thick on plywood no battens
You want to penetrate the plywood and protrude 1/2” so usually 2”
Whats the min pitch required for this type of.flat tile system?
Same as any time roof, I wouldn’t recommend anything under 4/12 roof
I have had flat tiles sliding out of place twice in the last 4 years. Are there some tiles that do not require nails? The house is only 4 years old....
Some Tiles use adhesive to stay in place, that is usually done in hurricane areas. Some tiles use a wire hook type fastening method. Regardless it should be fastened somehow; nail, adhesive or another system.
What is that blue sheet called beneath the tile
Polystick MTS+
Made by Polyglass
Thank you very much
I stack them deep and sell them cheap!!!!
13 and half istu much
Says who?