Thanks a lot for this great screen set :-) I encounter a weird problem since I installed this. After "Zero All", and starting the program, the maschine starts air-cutting 10 mm above my material. After zeroing the Z for the second time, all is good. Then loading another program for another Bit, and Zeroing the Z axis; it does the opposite, it starts cutting 10mm below what I have set. Any suggestions? Thank, Robert Glotzbach
Hey Robert, Thank you for your support. Its impossible to know what's the issue without seeing what's going on as I'm essentially a mechanic being asked to diagnose a car without it in front of me. We can schedule a consultation to cover it, and we can schedule next week. Thank you, Vince
hi, i got issue with center probe, on all the slots, normal i use big tex screen set, with all his marcro´s, can that be the issue that some of my probe dont work ? it goes to one side wall, probe it two times. and then it does nothing after that, like go to the other side and do the probe.
Thank you for your support. I haven't had anyone had this issue, and without seeing your installation, and settings there's no way I can diagnose the issue as I'm essentially a mechanic being asked to diagnose a car without it in front of me. I suggest carefully retracing your steps backward. You explained you're using macros from someone else's screen set, and yes that would certainly cause problems. Thank you, Vince
@@corvetteguy50 yeah I know it’s a small info. But I’m on lpt port. I got a backup on my installation of mach3. So I will try to getting to org macros back again :) hope it work. But right now all side probe of outer circles work. The only thing that goes not work is slot probe 😅 I’m using a old 2 mm broken end mill to have a good rounded profile
Hi there i follow exact your direction to down load PA screen unfortunately only i have boxes and light grey numbers could you please let me know what i have don wrong
I would start the process of uninstalling it, and reinstalling it again using the same process outlined in the video. If you're still having issues we can schedule a consultation to get it installed. Thank you, Vince
Here's the video to review as the designer discusses it as its not discussed in the screenset download. ua-cam.com/video/7o_V_1AIaXE/v-deo.html Thank you, Vince
Vince this is a very nice looking screen set thanks for the video, stay safe 👍🏼
Lou, thank you as always for your support. Have a great weekend!
Vince
Thanks a lot for this great screen set :-) I encounter a weird problem since I installed this. After "Zero All", and starting the program, the maschine starts air-cutting 10 mm above my material. After zeroing the Z for the second time, all is good. Then loading another program for another Bit, and Zeroing the Z axis; it does the opposite, it starts cutting 10mm below what I have set. Any suggestions? Thank, Robert Glotzbach
Hey Robert,
Thank you for your support.
Its impossible to know what's the issue without seeing what's going on as I'm essentially a mechanic being asked to diagnose a car without it in front of me.
We can schedule a consultation to cover it, and we can schedule next week.
Thank you,
Vince
hi, i got issue with center probe, on all the slots, normal i use big tex screen set, with all his marcro´s, can that be the issue that some of my probe dont work ? it goes to one side wall, probe it two times. and then it does nothing after that, like go to the other side and do the probe.
Thank you for your support. I haven't had anyone had this issue, and without seeing your installation, and settings there's no way I can diagnose the issue as I'm essentially a mechanic being asked to diagnose a car without it in front of me.
I suggest carefully retracing your steps backward.
You explained you're using macros from someone else's screen set, and yes that would certainly cause problems.
Thank you,
Vince
@@corvetteguy50 yeah I know it’s a small info. But I’m on lpt port. I got a backup on my installation of mach3. So I will try to getting to org macros back again :) hope it work. But right now all side probe of outer circles work. The only thing that goes not work is slot probe 😅
I’m using a old 2 mm broken end mill to have a good rounded profile
Hi there i follow exact your direction to down load PA screen unfortunately only i have boxes and light grey numbers could you please let me know what i have don wrong
I would start the process of uninstalling it, and reinstalling it again using the same process outlined in the video. If you're still having issues we can schedule a consultation to get it installed. Thank you,
Vince
Have the same issue.
Yeah this is a known issue now, doesn't seem to install correctly anymore.
Will this look also good on a 1024x1280 (4:3) screen?
It may be alright if that's all you have access to. Typically its better to stay with the native resolution of the screen set. Thank you,
Vince
@@corvetteguy50 What is the native resolution of this screen set?
Here's the video to review as the designer discusses it as its not discussed in the screenset download. ua-cam.com/video/7o_V_1AIaXE/v-deo.html
Thank you,
Vince
reinstall and install now all good