Thanks for sharing.. is there a way to breakout the toolpath or MDI window to a 2nd monitor? Would be very nice to see toolpath progress on a large screen during a cut.
Hi dear I have CNC Router from Flxicam its control system computer no more working operating system is QNX is this posiable i remove old compouter and fix Mach3 brakout board and run through Mach3 software i have servo motors in all three axes please guide me is there any chance to fix this,
Thank you again for your support. Its certainly possible retrofit it. Please contact me at storm2313@gmail.com to setup a consultation. Thank you, Vince
Great post thanks for this!!! Two things when i copy over the Bitmaps folder there is already one for the 1024 screenset so what should I do about that? If I replace it then the 1024 screenset wont be able to find it's associated bitmaps? The other thing is On my Jog increments with the Dark Screen set loaded I don't get "Cycle Step" like you do for the jog steps I just get a "1, 2 and 3" button which changes between 1.000, 0.1000 and 0.0100 respectively. Is this maybe because i'm using mm as my units and you're using inches? Many thanks again and keep up the awesome work! Cheers
Thank you for your support. Unfortunately, I can't answer your questions without actually seeing what you have going on. If you would like to schedule a consultation please contact me. Thank you Vince.
Very useful and understandable design. Thank you very much.
Thank you for your support. I really appreciate it. Vince
Thank you very much for your work! Very nicely done. This is a design I've been dreaming about for a long time. Good luck and all the best to you.
Thank you for your support, and kind words. I'm glad you enjoy it! Vince
Love this screen set. compliments to the chef! is there a way to show the B axis in the coord section and or the jog section
Thank you for your support. Just what's on the screen is available. Thank you,
Vince
Very helpful. Some great screensets out there.
Thank you Rob for your support. I really appreciate it. Vince
A very nice screen set thanks Vince 👍🏼
Excellent work, clean and efficient look. congratulations and thanks from BRAZIL
Thank you for your support. I really appreciate it! Vince
Thanks for sharing.. is there a way to breakout the toolpath or MDI window to a 2nd monitor? Would be very nice to see toolpath progress on a large screen during a cut.
Thank you for your support. I don't use two screens myself, but I don't believe its possible. Thank you,
Vince
Hi dear Excellent work keep it up
Thank you for your support. I really appreciate it! Vince
Hi dear I have CNC Router from Flxicam its control system computer no more working operating system is QNX is this posiable i remove old compouter and fix Mach3 brakout board and run through Mach3 software i have servo motors in all three axes please guide me is there any chance to fix this,
Thank you again for your support. Its certainly possible retrofit it. Please contact me at storm2313@gmail.com to setup a consultation. Thank you,
Vince
Very nice work man! Especially for a free download, thanks!
Thank you for your support. I really appreciate it! Vince
Great post thanks for this!!! Two things when i copy over the Bitmaps folder there is already one for the 1024 screenset so what should I do about that? If I replace it then the 1024 screenset wont be able to find it's associated bitmaps? The other thing is On my Jog increments with the Dark Screen set loaded I don't get "Cycle Step" like you do for the jog steps I just get a "1, 2 and 3" button which changes between 1.000, 0.1000 and 0.0100 respectively. Is this maybe because i'm using mm as my units and you're using inches? Many thanks again and keep up the awesome work! Cheers
Thank you for your support. Unfortunately, I can't answer your questions without actually seeing what you have going on. If you would like to schedule a consultation please contact me. Thank you Vince.
What’s it mean when only a few buttons show up when opened
Thank you for your support. You need to reinstall the screen set. Thank you,
Vince
🥰🥰big thanks