Woodturning - Are Pine Burls Worth Buying?
Вставка
- Опубліковано 6 бер 2023
- Woodturning - In this video I attempt to turn a pine burl but encounter a ton of issues when I try to complete this bowl. So the question is, are pine burls worth buying? As always, please like and share, thanks!
Get the Freshest CA glues in the market at Starbond
Use Code INLAYJIM at checkout to save 15% off on your purchase!
www.starbond.com/?rfsn=455379...
Sandpaper.ca USE CODE: inlayjim for 10% OFF
sandpaper.ca/
Designer Epoxy USE CODE: INLAYJIM for 10% off your first order.
designerepoxy.ca/
Hunter Tool Systems
American customers use this link below to get 10% off your order, use code INLAYJIM at checkout!
huntertoolsystems.com/
Canadian customers use this link below, please call Ken Rude to get your 10% discount at 1-403-830-3049
www.branchestobowls.com/hunte...
Instagram
/ spraguewoodturning
Facebook
/ spraguewoodturning
Website
www.spraguewoodturning.ca/
Email
spraguewoodturning@hotmail.com
If you want to send something me, send it to:
Sprague Woodturning
652 Rantz Rd
Petawawa, ON Canada
K8H 2W8
This video is for entertainment purposes, please read and follow all safety precautions with all your equipment!
American Amazon Subscribers use links below.
Drill Brush
amzn.to/2S8B66s
1 Gallon resin mixer
amzn.to/3wlP8QC
3ml Disposable Plastic Transfer Pipettes, used to transfer CA glue and pigment to work piece.
amzn.to/3qELuhL
Inkbird ITC-308 Temperature controller 1200W Heating and cooling thermostat.
amzn.to/34EdCJP
Starbond Adhesives
amzn.to/2Y3MtvY
Timber check moisture meter
amzn.to/2Jn0XTt
Scotch Brite Hand Pads
amzn.to/34Foffq
0000 Steel wool
amzn.to/3e8lcQa
Soapstone carving blocks
amzn.to/37TYief
Pen I use, Pilot V5 0.5mm tip, Black
amzn.to/3mGBRgv
¾” spindle roughing gouge
amzn.to/3eeycUu
UC Coatings End Grain Sealer
amzn.to/2HO8Ssx
Pressure Pot for Casting by California Air Tools
amzn.to/31Xm0T2
Canadian Amazon Subscribers use links below
Drill Brush
amzn.to/3pj4QcS
1 Gallon Resin mixer
amzn.to/3hHE8cc
Crown Pro Turning Parting Tool
amzn.to/3mCIEIo
0000 Steel wool
amzn.to/3jBfEyI
Soapstone carving blocks
amzn.to/3kJPX03
Pen I use, Pilot V5 0.5mm tip, Black (you can select the quantity when you get there)
amzn.to/3kUtU6U
Pressure Pot for Casting by California Air Tools
amzn.to/2TCY9n5
Inkbird ITC-308 Temperature controller 1200W Heating and cooling thermostat.
amzn.to/3oINYvF
Timber check moisture meter
amzn.to/34GJs8V
Scotch Brite Hand Pads
amzn.to/2TFnqNy
As an Amazon Associate, I earn a small commission from qualifying purchases. By purchasing from the links above, you are supporting this channel so I can bring great content every week! Thanks!
Waterlox Finish
exotic-woods.com/products/fin...
Beall Buffing System
www.leevalley.com/en-ca/shop/...
Ellsworth Signature Bowl Gouge
www.leevalley.com/en-ca/shop/...
Typhoon Carving Burrs
www.leevalley.com/en-ca/shop/...
Sculpture Supply Carving Stones
www.sculpturesupply.com/list....
Sculpture Supply Lead Free Pewter
www.sculpturesupply.com/detai...
Oneway Manufacturing Easy Coring System
oneway.ca/index.php?route=pro...
Saltmill Mechanisms
woodchuckers.com/products/cs-...
Peppermill Mechanisms
woodchuckers.com/products/che...
R&D Bandsaw Blades
tufftooth.com/product-categor...
Oneway Vacuum Chucking System
oneway.ca/products-category/c...
Combination Skew Chisel and Gouge
www.leevalley.com/en-ca/shop/...
Soapstone Block for Inlay Materials
www.leevalley.com/en-ca/shop/...
Rikon slow speed grinder
www.leevalley.com/en-ca/shop/...
CNM grinding wheel
www.leevalley.com/en-ca/shop/... - Навчання та стиль
It was nice to see how that burl looked when you attempted to turn a bowl.. That pitch is really crazy! Love the teaching moments about why you don’t turn pine burls. Keep up the good work, love your videos!
Thanks so much!
Thanks for the info on this Jim. I had a cedar burl that was very similar to this piece last fall. I felt bad when I had to pitch it in the fire, now I don't feel so bad. Misery loves company.
Yup, lol. Thanks for watching
I agree totally, have had the same experience
Definitely interesting, I've turned one small pine burl and it turned out okay. I've got one about the same size as this one and I've been hesitant to turn it. This basically solidified my decision
Firewood, lol. Thanks
I worked with alot of white pine and yellow pine when i was working for a stairbuilding company and i always loved the smell of the pine. I made alot of cool projects on my own time out of white and yellow pine. I loved working with wood.
Thanks for watching!
I've turned most of the wood in the north east, the only pine I've had come out nice was way over 100 years old. I still had major finishing issues with softness between the rings. Like the way you think though, it's always worth a turn. Thanks again Jim.
Thanks for sharing!
Interesting video. To bad that burl did not work out. I live on the East Coast lots of pine trees in New England where I live. And I don't recall seeing very many pine burls compared to other trees in my area. Most of the burls I see are on hardwood trees, I just started turning last year and have been warned to stay away from pine because of the pitch problems. But I still will play around with some pine framing lumber scrapes. It is free and if I screw it up it is OK, LOL.
Free is good, thanks.
Great video, I learn a lot from you. I want to learn to wood turn but my hand may not make it possible but it doesn’t stop me watching amazing turners like yourself.
Thanks for watching
Always appreciate the educational info, even without a beautiful, finished piece at the end.
Thanks again!
Thanks Jim for this demonstration, it’s part of what makes your channel unique, showing what doesn’t work or goes wrong.
Thanks 👍
Thanks for the educational video Jim. It's not always about the beautiful pieces you produce, but the why and how that you always seem to provide through your videos. Thanks for the bonus video this week.
My pleasure! Thanks!
You couldn't have made this at a better time for me; I was recently gifted some quite large pine burls. I appreciate knowing what to look for.
Good luck, lol. Thanks
Thank you for this video, as a relatively new turner, I have seen many videos and books that say don't turn pine but none have really shown/explained why. And I can't forget, Designer Epoxy!
Thanks for watching!
I carve my old Christmas trees into ornaments for the house and for the kids at school so I can understand the smell you're refering too. I deal with shellac after a quick sanding and it helps to minimize the smell and the loss of wood. No where in the scale you are dealing with, but it might keep the piece tighter. In the deeper voids I would use multiple coats. Just make sure it's not the amber as I am not a fan of the colour.
Edited to add: it would take multiple coats of shellac to seal the piece but I would give it a shot. Even if you do just the pitch to seal it so the rest can be sanded. Still going to go thru some sandpaper, but not as much or as fast/bad.
Thanks for the info.
Everything you do here is beautiful and creative. I am amazed every time I watch one of your videos.
Wow, thank you!
I loved the thumbnail for this video! The coloring and shape of burl got me curious for sure!
Awesome! Thank you!
I absolutely hate that you feel like you're talking to much. I love the educational value you give. I have shared your site to my family and have received excellent responses.
I think most do approve, just the odd hater out there, haha. Thanks
Very interesting video today. I've avoided pine like the plague over the years ever since during one turning I was covered in sap by the end. Nothing but hardwoods since. Lol
I actually forgot to mention that as well, lol. Thanks
Seeing it , along with explanation of the issues really does help us understand the problems and potential hazards that could arise from turning such a piece.
Thank you!
Thanks for watching!
I always watch woodturning before I fall asleep and I am so tired I just needed a quick blast of the lathe to send me to sleep. This was perfect and really interesting. All the best
Glad to help! Thanks
Thanks for showing us the burls and explaining the problems of working with it.
You bet! Thanks
You gave it a good try! I'm not a wood turner but certainly appreciate the education content you always provide, even when it doesn't result in something gorgeous at the end. :) Love the videos!!
Glad you enjoyed it, thanks!
When I first started turning, I thought using Pine to learn with would be cheap and easy. Boy, was that a frustrating experience. Darn near stopped, but then I got my grubby mitts on some Walnut and Maple.... very eye opening.
I recommend using soft maple or birch to start turning, thanks for watching!
Back to basics, education is always welcome 🥰 thank you for sharing!
Thanks for watching
Don't Apologize , It's part of the Work. The More Important thing to take away from this is that You at least " Attempt " to give the customer what they would like. But you don't pull any punches, if it isn't going to happen you let the customer Know, And That is what is more important. And that is the Attitude that people will remember, and have MORE of a desire to Buy from you, WHY? Because YOU are HONEST with them. And that is what Makes for GOOD Business. Cheers, Enjoy the Channel And will continue to watch..... All the way from Nova Scotia 👍👍👍
Thanks 🇨🇦🇨🇦
Where I grew up was surrounded by pine trees and my Mom couldn't figure out why I always had a cold. Yup, not a cold as it turns out I'm allergic to pine and pine pollen. Ironically, I tend to love things made with pine. I know, absolutely no logic there, huh? So I was sad to see you couldn't make this one work but I get why. Nice try though, Jim. 💜
They’re only good for the pine cones, lol. Thanks!
Burl #2 looks like you can pop the center out with a pry bar, instant bowl with no turning required! :)
Possibly, lol. Thanks
I've never tried to turn pine, but that pitch was crazy. Glad you posted this one, possibly saving me (and others) some headache down the road.
Thanks for watching!
One of things I really enjoy about your channel is that you explain the business side of turning. Very few turners on UA-cam do that. Even though I don’t plan to become a professional turner, I do plan to sell my work and the lessons you share from your years of experience are very helpful and inspiring. Thank you Jim!
Stuart
I appreciate that! Thank!
Interesting information and lesson here.
Glad you enjoyed it, thanks
I'm not a turner, but I love watching you create stunning works of art, and learning about wood turning. I live in Georgia, and grew up in a pecan orchard. Have you turned pecan wood?
I haven’t, doesn’t grow here in Canada. Thanks for watching
@@SpragueWoodturning , I live in NC , home of pecans. I think they have the same softwood issues as pine. Bees won't hive in a pecan tree either.
I am glad you posted this video. I liked reading other people's comments and questions and your response as those were my questions too. Very informative!
You are so welcome! Thanks
Yes, it's really good that you show us the good, the bad and the ugly on your channel. It really helps a person prepare for the reality of this kind of endeavor, which is really important, given what a serious investment it is to even start! Thank you.
I get that this is more opinion than fact; that you prefer avoiding them, even though some might find it worth the struggle. Hopefully that point is not lost on the pine-lovers watching!
I hope so to. I just processed another one for this weeks video. It will be interesting to see if it works out or not, lol. Thanks
Extra Special Bonus Content Thanks 🎉🎉🎉
Clear Resin. Ok, maybe not for a purist.
Not worth wasting the money on it. Thanks
Thanks for showing the ones that don't work too. It's one thing to hear it won't work, it's totally different to see why. We appreciate it
Thanks for watching!
Thank you for posting this. While the turning may not have been a success for you, it was an educational moment for me and many other fans.
Thank you very much!
This bonus video was definitely an education I didn't know I needed.
Thanks 😊
Im glad you posted this video. Ive never turned any pine before so its good to see the problems associated with it
Thanks for watching
Hopefully you save other folks some frustration, and some sandpaper. I love how you share your experience so freely.
Thanks for watching!
Another aspect of woodturning I had no clue about, very interesting to see. Thanks so much for the bonus vid!
Glad you enjoyed it! Thanks
I can see your reasoning with these two pieces but I have had some amazing bowls with Pine. I turn pine because I have an endless supply of it, free, as well as aspen. A lot of them I end up resin stabilizing with dye before final turning to toughen them up. I'd love to do some hardwood but it is so expensive to buy. I do have some black walnut, elm, crab apple drying but they are not ready yet. Jim, I love your candid videos, the education and your work. Thanks so much for taking the time to record what you do. Designer Epoxy
Thanks for watching!
Thanks for taking the time to edit and share this video. I appreciate your showing the good, bad, and ugly.
Thanks for watching
Very interesting and happy to have a bonus video. I am not a turner but love watching you.
I appreciate that! Thanks
I always appreciate your videos, whether they are a finished product or not. They are very educational to me.
Glad you like them! Thanks
What a lovely surprise to see a bonus video - always something new to learn with you, Jim. Thanks!
Glad you enjoyed it, thanks
Thanks for showing this. Good to see things like the separation of the rings pointed out.
Thanks for watching!
Thanks for the education here. I’ve yet to turn a burl but now I know what to avoid! Designer epoxy :)
Thanks for watching!
Very educational. A great example of the perils of soft wood.
Many thanks!
Thank you for sharing your thought process on this burl. It really helps me to understand and learn about wood turning😊
Glad it was helpful! Thanks
Used to park under a pine tree at my grandparents’ farm. Pine sap ruined the paint on my car after a while. I swore I’d never have a pine tree, then bought a house with 7 of them. Luckily Hurricane Katrina took care of them for me.
Only trees I’ll never regret cutting down. 😮
They are beautiful, but definitely mess makers!
Designer Epoxy
Yes, and you can’t grow anything under them either. Thanks for watching
Thanks for the video. Im very new to wood turning and this will help me avoid some issues!
Glad to hear it! Thanks
Thank you for the continued education. Thanks as always. Stay well. Designer Epoxy
Thank you! Cheers!
Thanks for taking the time to explain your choices. I definitely learned some things 👍
Glad to hear it! Thanks for watching!
Honestly, I’ll watch you turn anything, and I learned a lot. Thank you!
Thanks 😊
Thank you for explaining all of this ... may need to watch this again to cement the learning
Glad it was helpful! Thanks for watching
Thanks for your honesty regarding the pine burl. Hopefully viewers will accept your reasons for not wanting to turn the pine.
Always! Thanks
Great lesson for me since I'm such a newbie and am being offered pine burls by my logger friends (I'm in the Pacific Northwest) all of the time. Now I know not to waste my limited shop space storing them to turn! Thank you!
If there free, give them a go, can’t beat free. Thanks
Thanks for sharing. Before you even mention the aroma of the wood, I thought how lovely to have that pine smell. I love the aroma of wood. ❤ designer epoxy
Thanks for watching!
I have never seen that much pitch in wood. And the layers was just crazy. Thx for the info and take care.
Designer Epoxy
Thanks for watching!
Enjoy all content from you, Jim!
Thanks 😊
Jim: good info about the pine gum. I started out turning pine, because it was free and cheap. Very easy to learn on also. Having it fly off of the lathe is always an issue due to its softness. I stained my projects and then coated them in urethane. They came out nice and they were light. Take care and stay safe. PS: I have run across Eastern Larch groves up by Bissett Creek area while I was ATVing.
Good to know, thanks.
Been there and not again . We have property in Cloyne not that far from you . Spent most of the summer/fall cleaning up after the tornados . Lots of every wood for the sawmill and a lifetime of turning , so thanks for the insperation and tips , I will for sure stay tuned in . Also showing your links to the Durham Woodworking Club of which I am a member .
Sounds great! Thanks
Excellent video and great explanation of this type of wood. No finished piece at the end was very education and well versed. Great job and keep the videos coming.
Glad you enjoyed it! Thanks
Appreciate the honesty and the teachable moments.
Thanks for watching
Hi Jim thanks for showing the white burl before you started to turn it. I enjoyed you explaining about the pitch and rings it was very interesting I enjoy all your information you give on your videos I find it useful.sorry you was unable to make anything out of this burl due to the pitch. Amanda x
Glad you enjoyed it, thanks
Thanks for the info now i know why I was told to bake the pitch out of pine before you use it.
Don’t waste your time and money, lol. Thanks
At least you tried...
Not a turner (but I did make some cabinets/end tables & shelving in the past), your explanations make perfect sense.
Thanks for watching
Always enjoy the educational side of your videos
Glad you like them! Thanks
Thanks for letting us know. It's one thing if you're just doing turning as a hobby but for people who want to earn extra cash and cover expenses for materials. Knowing about the business side as well you help people make wise choices. Especially were to spend your money for improving your business or You Tube channels. I watched someone last night who should have upgraded sound equipment instead of buying fancy little disks to place on their merchandise.
Lol, thanks for this!
Ok that is one interesting piece of wood. Thank you for sharing this with us. It gave me a better understanding of wood burls and what to look for. Great job. Thanks again
Glad you enjoyed it, thanks!
At least you tried. Definitely interesting to see the difference between different types of wood.
Thanks for watching
I love how educational you always are. Thanks!! Might not have worked out in the end but still enjoyed the video 🙂
Glad you enjoyed it! Thanks
I've seen others use a torch and burn the pitch and kept on working. Sometimes they had to torch it again, but in the end, it was fine and able to be sanded and finished.
Thank you very much!
Interesting video, love your teaching style. Really down to earth and clear 👍
Thank you kindly!
I do appreciate the educating aspect of your videos
Thanks James!
Awesome, love watching your videos. Once again learned something new.
Awesome, thank you!
Your videos are always mesmerizing!
Glad you like them! Thanks
Thanks for the video. I Have taken on board your comment about pine burl and will avoid them. appreciate this quick video. thanks for sharing
Thanks for watching!
Great info! Thanks for the extra video too!
You bet! Thanks
Great video Jim! Thanks for sharing the good, the bad, and the ugly. 😉
Thanks 😊
I enjoyed watching it! Thanks for the bonus ‘ vid’.
Glad you enjoyed it!
That was interesting
, thanks. Designer epoxy, I gotta try that stuff!
You should! Thanks
Thanks for the lesson Jim very informative!
You are very welcome
Jim, a few years back I had a commission to turn a bowl from a very large balsam burl that came from a vacation property in Vermont that was special to a lady her son owned, like you pointed out the grain was very disappointing with no figure but so stable that after a few weeks of no distortion I told them it was ready after initially telling them that i'd have to twice turn it which could take months, it sure did smell good though.
I get talked into those types of jobs too, lol. Thanks
Wow, that was something else! Really fascinating to see the history of the tree in such a visual way, but unfortunate that it doesn't make for good turning stock. Very informative, thank you for sharing with us! :D
Glad you enjoyed it! Thanks
It is a good educational video. I've never seen the delamination. Thanks Jim.
Glad it was helpful! Thanks
thanks for the bonus material. informative.
My pleasure! Thanks
Thank you for sharing this information, keep up the Great videos
Thanks for watching!
Great presentation. Thank you for posting.
Glad you enjoyed it!
Designer Epoxy
Very good information here Jim about the pine burls.
Glad you enjoyed it, thanks
Thanks for the video and the lesson about what is worth turning and what is absolutely worthless. Oh, and Designer Epoxy.
Thanks for watching!
Thank you for showing the problems with pine very interesting.
No problem! Thanks for watching
When I saw the burl cut in half, the grain looked like an onion to me. Pretty cool, really. Enjoyed your video again. Thank you for the effort you put forth on each video.
A lot of burls look like that. Thanks
Good to know, putting that in the vault.
Thanks Jim
Glad to help, thanks
Every day is a school day. So interesting 🌞
Thanks for watching
Thanks for the lesson. I am surrounded by pine trees, but just haven’t seen any burls on them yet. Now I don’t feel like I’m missing much.
You’re not, thanks!
Thanks for the bonus video!
You bet! Thanks for watching
Always look forward to the next one.
Thanks 😊
Very informative! I have tried the pine and spruce burls I pick up from the local tree trimmer, and 9 our of 10 times, the juice ain't worth the squeeze, but as a hobbyist, not too big of a deal. If I wasted 8 hours of productive shop time, I would be quite put out... :-) DESIGNER EPOXY - gotta give the entry a try! - I really do enjoy all your content.
Thanks for sharing!
Agree with you about avoiding pitchy softwood, even burl. I understand boiling the wood can help improve its turn-ability. And it kills the bugs. An alternative is scrubbing the pitch pockets with detergent which dissolves the pitch.
Acetone works well to. Thanks
@@SpragueWoodturning …I was wondering that myself….if there was a way to remove the pitch…even if you then needed to use epoxy to fill the voids…hmmmmm…dunno if it’s worth the work….
Interesting content. Always enjoy watching your videos.
Glad to hear it! Thanks