Good tutorial on how to diagnose and repair. Nice ending where you mention other potential high pressure oil leaks. Question: for standpipes and dummy plugs why cant you just replace the o-rings rather than get new pipes?
Honestly I've never seen o ring seal kits for them. As far as I know you only replace the actual dummy plugs and stand pipes. There are Teflon seals also to keep seals from blowing out. I've never done it but there are companies that sell welded stand pipes so they are one piece. The connection between the two is where they generally leak. You can look it up
Thanks good job. Working on my 03 6.0 crank no start. Ipr removed, gonna get icp soon.I have scan Gauge 85%.Hope valve and sensor and pigtail fixes it.100k on hpop and I hope thats not the problem. I not a mechanic but I can turn a wrench. Icp wiring oil soaked.
@robertdilullo7343 if icp erupting is soaked then yeah icp is leaking through. Good luck. Hit me up on Instagram if you have any other issues. Thank you
Good tutorial on how to diagnose and repair. Nice ending where you mention other potential high pressure oil leaks.
Question: for standpipes and dummy plugs why cant you just replace the o-rings rather than get new pipes?
Honestly I've never seen o ring seal kits for them. As far as I know you only replace the actual dummy plugs and stand pipes. There are Teflon seals also to keep seals from blowing out. I've never done it but there are companies that sell welded stand pipes so they are one piece. The connection between the two is where they generally leak. You can look it up
exselente dianostic master mui bueno mi respecto para ustes master
Great walkthrough Tony. I hope the parts problem gets solved soon.
@ToolDemos thank you Steve, yeah me too. Parts problem is really bad right now
Thanks bud very good information
No problem 👍
Thanks good job. Working on my 03 6.0 crank no start. Ipr removed, gonna get icp soon.I have scan Gauge 85%.Hope valve and sensor and pigtail fixes it.100k on hpop and I hope thats not the problem. I not a mechanic but I can turn a wrench. Icp wiring oil soaked.
@robertdilullo7343 if icp erupting is soaked then yeah icp is leaking through. Good luck. Hit me up on Instagram if you have any other issues. Thank you
Great video, thanks
Glad you liked it!
Haven’t even watched vid yet and feel like he’s going to talk about the stand pipe o-ring that always goes out and causes that same problem
What causes for 6.0 run in idle for 5 minutes and suddenly to shut itself off?
@@mikeches7992 could be a lot of things message me on Instagram
That would be you turbo exhaust manifold regulator pressure sensor hpop sending unit