@skaraudio
Вставка
- Опубліковано 2 лип 2023
- Thanks for taking to time to watch my install, I hope it helps another car audio enthusiast out there.
This install will work on 2019-2023 Chevy Trucks without Bose. Feel free to ask any question, comment, Like and subscribe to the channel.
Shout out to @skaraudio everything sounds great!!!!
Follow us
Facebook: / sharklifeventures
Instagram: / sharklifeventures & / sharklifebobbyls
Twitter: / sharklifeventur
Products used in the video are listed below.
Skar Audio Dual 12" Ported Subwoofer Enclosure Compatible with 2019-UP Chevrolet Silverado/GMC Sierra Crew Cab Trucks
amzn.to/3pBTyoE
Skar Audio VD-12 D4 12" 800W Max Power Dual 4 Ohm Shallow Mount Car Subwoofer
amzn.to/3CYyU5e
Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W
amzn.to/449E5LK
Skar Audio 4 Gauge OFC Complete Amplifier Installation Wiring Kit, SKAR4ANL-OFC
amzn.to/44sZTSb
PAC SNI-35 Variable LOC Line Out Converter 1.2x6.25x5.9
amzn.to/46Br52Y
Nilight - 50004R 120 Pcs/60 Pairs Quick Splice Wire Terminals T-Tap Self-stripping with Nylon Fully Insulated Male Quick Disconnects Kit, 2 Years Warranty
amzn.to/3XDReub
3M Dual Lock Reclosable Fasteners, 04862, 1 in X 1 in, 4 pair per pack
amzn.to/3pxOj9G
GOOACC 102Pcs Trim Removal Tool, Auto Push Pin Bumper Retainer Clip Set Fastener Terminal Remover Tool Round Handle Crowbar Pry Kit Car Panel Radio Removal Auto Clip Pliers
amzn.to/3rcPYlo
Duck Brand 393150 Friction Tape, 3/4-Inch x 60 Feet, Single Roll, Black
amzn.to/3rfYBM7
#chevy #dayton #ohio #rst #silverado #silveradorst #z71 #caraudio #skaraudio #subwoofer #amplifier - Ігри
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
Wish I’d found this sooner. Went with KICKER no regrets but saw few ready to go options. Good video, so glad you added audio demo also.
Your video was the most helpful out of all the other ones I saw! Thank u sir!
Thanks helped me with my install
Great video shark 🦈, I'm literally buying the exact setup, I have the same truck too👌🏽 thanks for the tips in the video!!! From AZ✌🏽
No problem, keep me posted on your install
I got it too
Great job , thanks
Good video and sound really good 👍
I put a Zip tie on the seat clips so it’s easier to take the back seat off.
Brother u do damn good work...back in 1997 i had a chevy with a downfire box...now that ive seen the newer designs i would do (2) 8'..... front facing and the 8' will have better sound quality...down facing woofers have know where for the bass wave to travel ,so u actually losing sound like that.
Clean
Hey guys if u do all this and And it won’t work check ur speaker connection from ur amp to the sub. Stagger them. If positive and negative next to each other it’s wrong. Negative I. Far left positive on far right. ❤ I did finish thanks to this video but one detail I think will save u time and money.
Sweet !! I just finished my install tonight !! They have great prices and sound great too. Good job
Nice. I would have used and audio control LC2i so that way you did it have to run your remote to the fuse panel cause the LC2i has signal sense remote turn on.
Thanks I was looking into that
Thank you for all of the valuable information here. Considering doing this myself, I see you chose the 4ohm subs vs the 1ohm that they have available, curious as to why you chose these. In addition wouldn't the amp be under powered for these particular subs? I ask because the spec sheet says RMS Power at 4 Ohms = 370 Watts x 1 Channel (14.4v). Also, if you are running 2 subs wouldn't this cut the Wattage in half? Sorry for the questions just trying to understand it all a little more.
So if I did it all like you did and also wanted to change out the stock door speakers I’d just need aftermarket speaker, adapters, and aftermarket, harness connectors, right?
What color wires did you use for getting Audio for your rca’s
Is the twisted green wire sub out or just rear left
I have the same truck, i custom lockbox under my rear seats so i cant do what you did, do i have any other options to add bass?
the link to the box is for crew cab model would this fit double cab also i would think the seat spacing is the same whether its double or crew cab??
What ohms did you wire the subs to?
What size motor you have in the rst
Can you send me a pic of how you have your amp set up? Right now my problem is trying not to have the speakers sound horrible if bass is high
does anyone know if the wires are the same color on gmcs as chevy ik they are both gm
You can tap all speakers in right rear door jam.
You have more info on this?
@@SadBoyENVY under the rocker panel cover
Should space the amp off the carpet so it can breathe and not get too hot
What's up man great video. I also have a 2021 silverado and I was wondering are you still happy with those skar subwoofers? I'm considering buy the same loaded setup but just wanted to get your opinion first before I purchased them
No complaints at all
nice install, for the LOC did you tap negative wire to green and black and positive wire to the green.
Yep
On the SNI do you use both negatives and both positives to the green green/black?
Where is the anc located
Man I’m stuck on the line converter
Sni35 or the lc2i? I asked for the same setup in my 21 Silverado and was told I can’t use the sni35. Curious on how your system is holding up with the sni35?
Hey bro question? i have the same year truck but not an rst and I have a double cab.. but I can’t seem to find a box for my truck. Do you think the crew can one would fit mine?
It should check Skar Audio website
I just put mine in last week I have a black RST with the Bose system. I have two Skar 8 inch EVL. And they get down.
Good install video! One question, what size is the nut you used to fasten down the ground wire? thanks
I’ll check in the morning
@@SharkLifeVentures where did u get the box
Can you post a picture of where you set your gain,LPF, and subsonic?
I got you!!
I need a picture of that as well.
Did you add the subs or was it a complete box w/ subs?
It’s was a complete box w/ subs
Same system same truck and my amp does NOT fit. Exact skar system. So I am stuck where to mount my amp in my truck. Seat pinches the amp every angle.
It will fit under the passenger seat or if you pop the back seats off there’s space to mount it on the back wall. There’s a Sierra video I followed
how is the bass? im getting the exact same setup. wondering if i should get the 1500.1 amp instead of the 1200.1
It’s sounds great with the 1200, but I’m swapping it out for the 1500
After watching your video i thought "he's going to want more power" I know those Skars can push out more. Check out JL C1 speakers. I installed some in my Silverado (same as yours). I ran without an amp for a month and some people thought it was amped. Thanks for the Vid.@@SharkLifeVentures
Could 0/1 gauge fit through that grommet
Yes, it can. I have 2/0 running through mine. Just had to spray it with lubricant.
What about the rest of the speakers??? And additional amps???
Nothing else yet but I have plans for the spring
Where did you mount your ground ?
Go to 10:12 the mount for the jack
Can you provide help with the wiring. Diagram?
Where did you tap for the remote. I know the video says next to the big fuse but it doesn’t show where you ended up tapping to. Also need help with the wiring of the RCA converter.
Thank you!
@@Pardomiguel ua-cam.com/users/shortsfgt-ODMp3U8?si=rMvR3f0IIScc_neN
Should I go with the sni-35 or the lc2i?
Does the system sound better adding the 1500 watt amp?
I don’t have a ton of experience installing, but I’ve done my fair share of research and from what I understand, a more powerful amp will not necessarily make the system sound better. The subwoofers/speakers are manufactured to a certain RMS rating, or power where they function best. Can you give them them more power with a more powerful amp, you can and it may sound louder to a degree. But once you do that you risk damaging your subwoofer. Look up “killing a subwoofer” on UA-cam and there are plenty of videos of people who purposefully hook up a low-power sub to a powerful amp to bust it.
Do you need a remote wire if your using rca’s?
Yes the remote wire is what turns your amp on and off!.
Where did you connect the remote. Thanks @@SharkLifeVentures
@@kevindanielschay ua-cam.com/users/shortsfgt-ODMp3U8?si=RyO091zS7oW7oEaM
Any places that can do this in the dfw area?
I got a home boy down there I’ll ask him
@@SharkLifeVenturesplease let us know because im looking to get an install
Clean install iam not a big fan of skar.everyone has an opinion when it comes to quality of sound.plus that amp needs to be bolted down.
Man I can’t see the damn setup. Smh