2019 - 2024 + Chevy / GMC Truck 5 Channel Amp & Sub Install

Parts linked in the description below!
Watch a full tutorial as a 2024 Chevy Silverado will have a 4 channel and mono amplifier, along with two 12" subwoofers installed. We will be using an Audio Control LC-4.800 and LC-1.800 to power our system while bypassing the factory Bose audio sound system.
NOTE: Our GM Truck was equipped with the factory BOSE audio sound system. We will be completely bypassing the OEM amplifier to install our new equipment. IF you do not have Bose, we can link those corresponding parts in the description of the video.
This video applies to GM Vehicles such as Sierra, Silverado, Tahoe, Suburban, Avalanche, Yukon, and Escalade models for years 2019, 2020, 2021, 2022, 2023, 2024 and newer. This video also includes rear seat trim and panel removal, amplifier rack and wiring, and installation and testing.
*For the front door speaker install, click here:
• Chevy / GMC Truck Fron...
*For the rear door speaker install, click here:
*For a mono amp and sub install video to the Bose system, click here:
• 2019 - 2023+ Chevy / G...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used (Amazon Associate / eBay Partner Paid Links):
*AudioControl LC-4.800 4 Channel Amplifier: amzn.to/45JWKiR
*AudioControl LC-1.800 Mono Amplifier: amzn.to/3ROOFUg
--Alternative 5 Channel Amp: AudioControl LC-5.1300:
--Alternative 5 Channel Amp: Kenwood 5 Channel: amzn.to/3tjoj3a
*Sounds Good Stereo Amplifier Rack (non paid): soundsgoodstereo.com/products...
*Custom Subwoofer Box for two 12" Subs: www.soundoffaudio.com/2019-23...
--Alternative Subwoofer Box option:
--Skar Audio 12" Empty Single Sub box: amzn.to/3RUEYDJ
--Skar Audio 12" Empty Dual Sub box: amzn.to/4bmj8QB
--Skar Audio Forward Firing 8" Empty: amzn.to/45MstQk
*JL Audio 12W0v3-4 Subwoofers (not available on amazon)
--Alternative Subwoofer Suggestions:
--Kicker 12" Shallow: amzn.to/3XSSoDU
--Skar Audio Shallow: amzn.to/45JDjXv
--Skar Audio 12" Loaded Single Sub box: amzn.to/4eLemyQ
--Skar Audio 12" Loaded Dual Sub box: amzn.to/3W4l8bv
*Axxess AXDSPX-ETH1 / BOSE Bypass Harness: amzn.to/3L87gqE
*AudioControl ACR1 Bass Knob:
*Stinger 4000 18" RCA cables (3x): amzn.to/3VOu0Rf
--OR Male RCA Couplers: amzn.to/3xQDaEV
*Skar Audio 1/0 OFC Wiring Kit: amzn.to/3hlbZdo
--OR if you need a 4 gauge, here is an OFC kit: amzn.to/31f0r2U
*Extra OFC 4 Gauge Wiring: amzn.to/3Vw1eDo
*Recoil Fused Distribution Block: amzn.to/4btP05R
*Recoil Grounding Block: amzn.to/4btP05R
*IF you do not have the factory BOSE amplifier, here are the parts needed (instead of the Axxess AXDSPX-ETH1):
*Pac LPH-GM72 Radio T Harness: amzn.to/3RQPGuO
*AudioControl 5/6 Channel LOC: amzn.to/45MrAY0
*9 Conductor Speaker Wire (2x): amzn.to/3xK4PSk
Disclosure: As an Amazon Associate / eBay Partner I earn from qualifying purchases

[@ProvoBeastAudio]

Parts used and recommended in the description of the video!

[@michaelwatson5747]

Awesome work! I always learn something when I watch your vids. Thanks for sharing.

[@user-vj3wd3ge4l]

Clean install

[@Warden95]

As difficult as it is to remove back seats, hope they don’t ever have to adjust the amps 😂

[@edwardbeleele5593]

Does anyone make amp racks for 08 GMC crew cabs like this to ade the installation of amps

[@el_animal2146]

So is the AXDSPX-ETH1 Ethernet like the JL Audio fix 86 except without the harnesses

[@ProvoBeastAudio]

The same on the level of a DSP, but very different as the JL DSP requires you still to keep the Bose amp installed (so it can still communicate with the OEM radio) and you'd tap into the factory amp outputs for signal. Axxess piece totally allows you to remove the factory amp.

[@leomaster101]

can the amp rack work with a non bose truck?

[@ProvoBeastAudio]

Usually non-bose trucks don't have the mounting spots on the back wall where the bose amp usually goes. My suggestion is to pull the rear seat out and see how it would mount. If it does still work, let us know!

[@juangarza6271]

Does anyone know if there a harness for non-bose that will send the signal back from the 4-chan amp to the speakers?

[@ProvoBeastAudio]

There is, and it's linked all in the description of this video. Go check it out.

[@juangarza6271]

The one linked on the description is the black/gray connector. Mine has the aqua/beige connectors. I know there is a T-harness to add a sub/amp but haven't been able to find one to also add a 4-chan amp and send back the signal through original wires.