If you guys enjoyed this video, please consider supporting my work by checking out the links below! Get the SV06 ACE at the best possible price: ► shareasale.com/r.cfm?b=2559435&u=3650799&m=131011&urllink=&afftrack= ► www.sovol3d.com/?ref=EMBRACEMAKINGSV06ACE Looking for the Sovol core XY cube frame monster? Best price on the SV08 here: ► shareasale.com/r.cfm?b=2559397&u=3650799&m=131011&urllink=&afftrack= Need the universal spool stand for your SV06 ACE or another application? You can find it here: ► embracemaking.com/products/universal-top-mount-spool-stand A few other cool tools and things for 3D printer enthusiasts. (As an Amazon associate I may earn a small commission at NO extra cost to you) Sunlu Matte Blue PLA (as seen in the video): ► amzn.to/3ZhlVYB Polymaker PolyTerra PLA (One of my favorite filaments): ► amzn.to/3sdhK1x eSUN PLA+ (Another one of my favorite filaments): ► amzn.to/3QA4tuq Electric Screwdriver: ► amzn.to/3JRbbZe Rechargeable Batteries: ► amzn.to/3W6dAoK LED Bars for your work space: ► amzn.to/3Cuk3CD
here is a question. I've been searching for a way to change the zero on the Y axis on mine, but I cannot locate anything on the screen. is this Gcode fix?
Just to be clear you want to change where on the print bed the y=0 position is? Not the physical end stop position, correct? If it is just the software y=0 then you should be able to go into the printer.cfg file in Klipper and apply a y offset I think. I can look into that.
@ when i do the print to start. The orca slicer says the print is centered. When it starts to lay layers. Its off centered on the physical build plate.
Is it off a little bit or a lot? When I first got the machine I didn't remove the piece of foam wedged under the print bed at the back so it was hitting the end stop early and messing up my y axis. Otherwise if the print is centered in Orca it should be centered on the bed.
If you guys enjoyed this video, please consider supporting my work by checking out the links below!
Get the SV06 ACE at the best possible price:
► shareasale.com/r.cfm?b=2559435&u=3650799&m=131011&urllink=&afftrack=
► www.sovol3d.com/?ref=EMBRACEMAKINGSV06ACE
Looking for the Sovol core XY cube frame monster? Best price on the SV08 here:
► shareasale.com/r.cfm?b=2559397&u=3650799&m=131011&urllink=&afftrack=
Need the universal spool stand for your SV06 ACE or another application? You can find it here:
► embracemaking.com/products/universal-top-mount-spool-stand
A few other cool tools and things for 3D printer enthusiasts. (As an Amazon associate I may earn a small commission at NO extra cost to you)
Sunlu Matte Blue PLA (as seen in the video):
► amzn.to/3ZhlVYB
Polymaker PolyTerra PLA (One of my favorite filaments):
► amzn.to/3sdhK1x
eSUN PLA+ (Another one of my favorite filaments):
► amzn.to/3QA4tuq
Electric Screwdriver:
► amzn.to/3JRbbZe
Rechargeable Batteries:
► amzn.to/3W6dAoK
LED Bars for your work space:
► amzn.to/3Cuk3CD
Very good presentation. Please could you share the spool holder stl?
here is a question. I've been searching for a way to change the zero on the Y axis on mine, but I cannot locate anything on the screen. is this Gcode fix?
Just to be clear you want to change where on the print bed the y=0 position is? Not the physical end stop position, correct? If it is just the software y=0 then you should be able to go into the printer.cfg file in Klipper and apply a y offset I think. I can look into that.
@ when i do the print to start. The orca slicer says the print is centered. When it starts to lay layers. Its off centered on the physical build plate.
Is it off a little bit or a lot? When I first got the machine I didn't remove the piece of foam wedged under the print bed at the back so it was hitting the end stop early and messing up my y axis. Otherwise if the print is centered in Orca it should be centered on the bed.
@ 🤣🤣🤣 that was it. Little foamy guy stuck in.
Yeah I mention it in the video above, I missed it too and it screwed me up for a whole day 😭 lol