If you guys enjoyed this video and would like to help support the channel or Sainsmart who sent the K1C to make it possible, check the links below! SainSmart (Creality K1C): ► www.sainsmart.com/collections/3d-printers/products/creality-k1c-fdm-3d-printer? SainSmart (GT3 PLA Filament) ► www.sainsmart.com/collections/filaments/products/gt-3-pla SainSmart Amazon Store (Creality K1C) ► amzn.to/3XNeEi6 SainSmart Amazon Store (GT3 PLA Filament) ► amzn.to/45m8s1v Official Creality Store (K1C) ► shareasale.com/r.cfm?b=2504941&u=3650799&m=124834&urllink=&afftrack= ► amzn.to/4e84i23 (As an Amazon associate I may earn a small commission at NO extra cost to you) A few other cool tools and things for 3D printer enthusiasts Polymaker PolyTerra PLA (One of my favorite filaments): ► amzn.to/3sdhK1x eSUN PLA+ (Another one of my favorite filaments): ► amzn.to/3QA4tuq Electric Screwdriver: ► amzn.to/3JRbbZe Velcro Tie Wrap Rolls ► amzn.to/42jr3dX
This is the best review of a 3d printer I've seen so far. Showed how it is to own and actually use it. The long term review and the fact you had multiple printers makes such a difference.
Great video. I love mine. So much so I added the K1 Max 2.0 :-) I wanted to mention incase no one else has...The new Orca Slicer 2.2.0 fully supports the K1 series now. You can send prints directly to the printers now without having to root. When connecting the printer where it says Octa just hit the drop down menu and you will see Creality in the list now. Select that and boom... Happy printing
I think many were hesitant to get a K1C because most people wanted what would otherwise be "K1C Max" in a sense. All the upgraded features but with the Max's print size. The 300 squared (or with taller z) seems to be the new desired "standard" print volume overall, especially now that 1000x1000 printers are becoming a consumer-grade option.
Definitely. For what it's worth I do have the Max with the earlier extruder hot end and it's still going strong - I've logged a ton of hours on it... I don't know if the latest Max variant is shipping with the latest extruder and hotend but I'm pretty sure it is... so in that regard it kind of is the K1C max already... just that Creality doesn't do the best job with the printer naming conventions.
That's great, the new slicer will make your life a lot easier as I described in the video. I do also have two Bambu A1 and two of the P1P and there are pros and cons to every model still. The P1P didn't really impress me that much given all of the hype - don't get me wrong it's very good, but the K1C is on par but just way less fanaticism around it. You'll love your K1C
The vertical artifacts were fixed from the firmware updates and the slicers I have a last gen k1 and after more then 9 months of use never had a problem I did ad a camera and did root the printer took of the stupid drag chain and printed a lighter fun duck only upgrades I did . Nice video
I am looking into a printer with closable casing. Curently have a Voxelab Aquila. My first 3d printer, but getting annoyed with it. Would this be a good upgrade? Its not for a farm but for private / non commercial use
Great Review as always, but I'd like to see it being used for its intended purposes such as printing PETG CF, ASA CF and Nylon CF to see how it performs. I have only see people print PLA CF on the printer. I look forward to seeing what you do with it.
Thank you David! I think one of the reasons you usually see PLA-CF is that it sticks well to the print bed. I have some PETG-CF that in retrospect I could have shown. Nylon based materials don't stick well to the PEI print surface so I know that would be a big challenge, and I think I have some ePA-CF that may or may not work... Might make a good second video 😉
Right now I don't have any ASA or ABS with CF as the smell really bothers me with those two. I do print a lot of PETG-CF on the K1 max that has the original hotend and I put a hardened steel nozzle on it. Haven't had a problem with it and I've logged a ton of hours on that printer so the K1C should be more or less the same
There is definitely some of that meme: "hey, can I copy your homework?" ..... "Sure, just make sure it doesn't look like you just copied it" sort of thing going on here lol
Junk again. IMO. All printers are great. But without software support...ie...profiles.... the machine is junk. Anycubic is just as bad. Anyone can put together a printer. I have a few for years until I went Bambu. I now don't make excuses like its settings here settings there..because of this because of that..i tried so much to justify all my old printers... I'm glad i don't have to make excuses now.. pass.
My brother i christ, someone have to make the profiles. Either you do it, and use any filament, or you use the manufacturer's profile as a crutch, and be "locked down" to a specific manufacturer filament. (I know you can always make your own profiles later)
Dunno what you're babbling about. This is my first printer, got it 2 weeks ago. I've printed few dozens of models since without any issue using the stock software and built-in profiles. Without touching any settings. Even the best tool can't make you an artist, you're probably the junk element here. IMO.
@20cent bad prints are not good prints if you keep telling yourself it's good. Stay junky. I'm just letting you know. Don't upgrade since you can't take criticism and stay attacking someone's intelligence just like woke people attack others. I hope you stick with them and keep saying they are great.
If you guys enjoyed this video and would like to help support the channel or Sainsmart who sent the K1C to make it possible, check the links below!
SainSmart (Creality K1C):
► www.sainsmart.com/collections/3d-printers/products/creality-k1c-fdm-3d-printer?
SainSmart (GT3 PLA Filament)
► www.sainsmart.com/collections/filaments/products/gt-3-pla
SainSmart Amazon Store (Creality K1C)
► amzn.to/3XNeEi6
SainSmart Amazon Store (GT3 PLA Filament)
► amzn.to/45m8s1v
Official Creality Store (K1C)
► shareasale.com/r.cfm?b=2504941&u=3650799&m=124834&urllink=&afftrack=
► amzn.to/4e84i23
(As an Amazon associate I may earn a small commission at NO extra cost to you)
A few other cool tools and things for 3D printer enthusiasts
Polymaker PolyTerra PLA (One of my favorite filaments):
► amzn.to/3sdhK1x
eSUN PLA+ (Another one of my favorite filaments):
► amzn.to/3QA4tuq
Electric Screwdriver:
► amzn.to/3JRbbZe
Velcro Tie Wrap Rolls
► amzn.to/42jr3dX
This is the best review of a 3d printer I've seen so far.
Showed how it is to own and actually use it.
The long term review and the fact you had multiple printers makes such a difference.
Finally a Review which talks about the prints and not about being to stupid to Change a nozzle or fitting the filament. Thanks for that!
Thanks :) glad you liked it
Great video. I love mine. So much so I added the K1 Max 2.0 :-) I wanted to mention incase no one else has...The new Orca Slicer 2.2.0 fully supports the K1 series now. You can send prints directly to the printers now without having to root. When connecting the printer where it says Octa just hit the drop down menu and you will see Creality in the list now. Select that and boom... Happy printing
I ordered a k1c i wanted a bambulab p1s but i got my new k1c for 370 euros and i think its realy good right now
Your content is always top-notch. Thank you again for your thoroughness.
mine arrived while watching this video :)
thanks for the good review video. just ordered mine:)
I think many were hesitant to get a K1C because most people wanted what would otherwise be "K1C Max" in a sense. All the upgraded features but with the Max's print size.
The 300 squared (or with taller z) seems to be the new desired "standard" print volume overall, especially now that 1000x1000 printers are becoming a consumer-grade option.
Definitely. For what it's worth I do have the Max with the earlier extruder hot end and it's still going strong - I've logged a ton of hours on it... I don't know if the latest Max variant is shipping with the latest extruder and hotend but I'm pretty sure it is... so in that regard it kind of is the K1C max already... just that Creality doesn't do the best job with the printer naming conventions.
@@EmbraceMaking Yeah they tend to do a lot of revisions and not mention it or offer it to backwards-compatibility support for older versions
Yep that is true. Revision control on their end is not the best lol
I appreciate your honesty. Got K1 on Amazon for about $320. I think it's worth it. Let's hope it has upgradet extruder.
Thanks! The K1 will be great for you, is this your first printer?
@@EmbraceMaking Yes it is. Your channel will be of great help. I am glad they are still makers out there who are not Bambu religion fanatics.
That's great, the new slicer will make your life a lot easier as I described in the video. I do also have two Bambu A1 and two of the P1P and there are pros and cons to every model still. The P1P didn't really impress me that much given all of the hype - don't get me wrong it's very good, but the K1C is on par but just way less fanaticism around it. You'll love your K1C
have they fixed the warping beds ? i wanna get one but scared too
The vertical artifacts were fixed from the firmware updates and the slicers I have a last gen k1 and after more then 9 months of use never had a problem I did ad a camera and did root the printer took of the stupid drag chain and printed a lighter fun duck only upgrades I did . Nice video
I just ordered a k1se as my first printer
If you have to choose between a K1C Refurbished for $280 vs A1 $340. Which you think can give better quality and be more reliable.
I am looking into a printer with closable casing. Curently have a Voxelab Aquila. My first 3d printer, but getting annoyed with it. Would this be a good upgrade? Its not for a farm but for private / non commercial use
Please i need a help . My ender-3 v3 3D printer dudplay cable is bad can I use K1 CABLE as replacement
Good video I've mine about now it won't retract the filemant
I did not have to root my K1C in order to add it to orca slicer
please help theres a lot of vfa even at 400mm/s
Can the k1c print pa-gf?
why don't you check the official website that list all the specs and features of their models?
@20cent tnx for answering my question 🙄
the website has answers you need. Nothing, glad to help.
Great Review as always, but I'd like to see it being used for its intended purposes such as printing PETG CF, ASA CF and Nylon CF to see how it performs. I have only see people print PLA CF on the printer. I look forward to seeing what you do with it.
Thank you David! I think one of the reasons you usually see PLA-CF is that it sticks well to the print bed. I have some PETG-CF that in retrospect I could have shown. Nylon based materials don't stick well to the PEI print surface so I know that would be a big challenge, and I think I have some ePA-CF that may or may not work... Might make a good second video 😉
@@EmbraceMaking that makes a lot of sense. I look forward to seeing you test it further. I intend to get one for making car parts from ASA CF.
Right now I don't have any ASA or ABS with CF as the smell really bothers me with those two. I do print a lot of PETG-CF on the K1 max that has the original hotend and I put a hardened steel nozzle on it. Haven't had a problem with it and I've logged a ton of hours on that printer so the K1C should be more or less the same
@@EmbraceMaking thanks for letting me know.
Would probably print something so that tape can just go on the chain personally.
Looks like they copied a lot of design elements from the Bambu Labs X1C
There is definitely some of that meme: "hey, can I copy your homework?" ..... "Sure, just make sure it doesn't look like you just copied it" sort of thing going on here lol
Sorry for nitpicking, but they're called Bambu Lab ^^
@@elhuronBrooo😅 ur a square that is also incorrect.
k1c
im gonna feel free to leave a comment like you told me to , that looks more orange then red ... sorry
Junk again. IMO. All printers are great. But without software support...ie...profiles.... the machine is junk. Anycubic is just as bad. Anyone can put together a printer. I have a few for years until I went Bambu. I now don't make excuses like its settings here settings there..because of this because of that..i tried so much to justify all my old printers... I'm glad i don't have to make excuses now.. pass.
My brother i christ, someone have to make the profiles.
Either you do it, and use any filament, or you use the manufacturer's profile as a crutch, and be "locked down" to a specific manufacturer filament. (I know you can always make your own profiles later)
Dunno what you're babbling about. This is my first printer, got it 2 weeks ago. I've printed few dozens of models since without any issue using the stock software and built-in profiles. Without touching any settings.
Even the best tool can't make you an artist, you're probably the junk element here. IMO.
@20cent bad prints are not good prints if you keep telling yourself it's good. Stay junky. I'm just letting you know. Don't upgrade since you can't take criticism and stay attacking someone's intelligence just like woke people attack others. I hope you stick with them and keep saying they are great.
I know effort is a lost art but come on bro, a little tinkering is all you need