Watercooled Hit & Miss Engine with Pump Ready to Run!
Вставка
- Опубліковано 10 жов 2019
- Get it here!
ban.ggood.vip/IBP6 (code: BGETX30 US$329.99)
This particular engine was on the first batch of manufactured engines, that's why you may see on the video some cosmetic defects.
Also if you order one, from now on, it comes with a pull start so you don't have to crank it from the flywheel by hand as you see me on the video.
Finally, I got my carburators to make the conversion on the v4.
Stay tuned!
►Subscribe! bit.ly/2m1d1y7
Instagram: johnnyq_90
Support my videos!: / johnnyq90
Follow me on Twitter! / johnnyq90 - Наука та технологія
Get it here!
ban.ggood.vip/IBP6 (code: BGETX30 US$329.99)
This particular engine was on the first batch of manufactured engines, that's why you may see on the video some cosmetic defects.
Also if you order one, from now on, it comes with a pull start so you don't have to crank it from the flywheel by hand as you see me on the video.
Finally, I got my carburators to make the conversion on the v4.
Stay tuned!
What thermal camera was that? It looked pretty good! Maybe a short video on it? Please?
Also love the videos! Keep it up!
When do you give this engine a upgrade?
@@Soggstermainia Same question, hope to see you upgrade this engine. Thanks
@@AEON. Exactly. the flywheel acts like a governor. When the speed reduces (under load) ignition happends. When there ir no load, there is no ignition, since the governor is open.....
Yeah, a hit and miss engine works by only using gas and electricity when it needs to, so when it slows down enough, the weights stop being flung outwards and press a lever that allows the combustion cycle to commence until it speeds back up.
You should also build a Dyno, for those little Engines.
YES!!!
Great suggestion
An electric motor can be used as a DC or AC generator. That's actually the idea behind regenerative braking in hybrid and electric vehicles.
I can't be the only person who'd love to sit down with the builder and watch the entire construction process and everything being explained and what each part is and why it's there and does what it does.
My brain really enjoys watching these engines running but it does love the build process because you get to see the real intricacies within the entire engine.
Great video, the audio was a little on the low side but turning the volume up fixed it.
Thanks for making these great videos.
Well I guess an engine such as this is much less complex than psychology!
Not at all, human psychology is the easiest thing in the world to learn.
I'm sure you've heard the saying "know thy self" that's a very apt saying for understanding psychology.
A saying I've come up with since studying psychology is "you can tell the quality of a nations people by the music that they keep"
The main issue I personally have with teaching people psychology is the way it comes across when explaining it because it can seem a bit patronising and this is predominantly because nobody who wants to know it really wants to know it because of their own issues it forces them to face.
I had to study it because I didn't have a choice if I'd not done so the family member I've helped change the life of wouldn't be with us today.
Little over 5 years I've been studying it and I'm still in study today, I don't think my study into the subject will end but it really isn't complicated and what I do now is more to do with observations and analysis of individuals.
I'd be happy to give you a lesson free of charge if you'd like but it's quite a bit of reading because I'll have to type it here for you.
I will be fully explaining it on UA-cam starting in the New Year but I'll be explaining what no university or psychologist ever explains.
If you would like a lesson do say and I'll provide you with the fundamentals.
I'm not going to kidd you though and say it's fun or exciting because it really isn't it's pretty distressing.
Hey, Johnny, its time for your own handcrafted engine ;))
V8? 😍
I had the same idea : a JohnnyQ90 gas engine deserves to be created.
Sure you have this hidden somewhere in the back of your mind.
everyone like this so he sees it
Check this one out. Pretty sure it's gonna be hard to top that ua-cam.com/video/rz0Uteqfpao/v-deo.html see one of his more recent videos. He mounted that beauty on an r/c car.
Love this video! The hit and miss engine was a workhorse on the rural farm. This little model engine is great!
I am in awe of the stuff you do. Keep it coming Brother!!
Road to 1M ✊
I just started the first 30 seconds of video and it’s just a succession of beautiful miniature mechanical images ! I'm in love
That's a beautifully designed and made model. Thanks for the great video.
I think your crawler is on par with this in my opinion
@@quentin8094 much appreciated bro
Getting so much better every visit.
Brilliant work. Excellent craftsmanship. Like all hit and miss engines could use with a very heavy base but it works and that's what matters.
amazing work as always
Beautiful machining. Very nice!
My father owns a large hit and miss on a carriage. Only about 6 HP but when we had it running on the trailer it shook the whole damn thing. It's really something
Your videos are always a treat!
Nice little engine.
Thanks for the video.
I love engines. I live your mini engines. Keep up the killer videos. These motors are so cool
Amazing work, thank you very much!
wow that was so SWEET thanks. wish I could afford some of what you have so cool.
Gotta respect ur passion.
Cool little engine. I love going to car shoes and seeing the big ones run. They are amazing.
I have never been to a car shoe. Do you wear them when driving only? :D
Where’s the supercharged mini wankle engine?
Don’t get me wrong, this is a great video, but still.
Exactly !!!!
If you followed his channel you would know he has been having issues with getting the SC working correctly........Where is your super charged mini wankle engine video?
The engine is fine, but the supercharger is busted. He's doing other projects for now.
Bro don't hate
Not gonna happen.
That's a thing of beauty!
A line shaft mini lathe woule be a great project to make Johnny
I don't know why but these mechanical stuff always make me super excited...
Watched the whole Dr Squatch shampoo commercial, that's funny stuff. Also I enjoy every minute of your videos.
I really gotta get myself one of these!
I guess they never miss, huh?
No, I'm not sorry
i am glad i don´t have to be the one
Only you better be sorry
:(
You got a boyfriend i bet he doesnt kiss yah
Oh my fucking god you will be sent straight to hell
Круто !!! Интересный механизм подгазовки!!!
I would pay for a guided tour round your house !
Wow, now this is awesome 🤩. I want to do this too
great video. Also loved the music.
Awsome video man this is really cool
I hope you get 1 million subscribers!
Gotta Love Creativity
It has been a while since your shop tour, as an idea it would be interesting to see a tour of your creations all lined up.
You should make a steampunk RC car out of it. Since Prallplatte is MIA, you'd be the only old guard mini engine guy with something like this. :D
This one will be cool with a load so it runs mostly on the hit hit
Love your stuff keep it up
The engine music percussive beats seems like it would fit the audio pretty nice.
Needed a heavier base, but okay really cool.
Waiting for mine,,hopefully it doesn't take 6 months and 3 orders to get it this time.
i want to see the next V4 engine Video :D
amazon sells "whippits" which are whip cream chargers about the size of 12 gram co2 cartridges except filled with nitrous, and little kits that you can load the chargers into as a mini Nitrous kit. i think it would be awesome if you hooked that kit up to the single cylinder 4 stroke.
Hm, so this is an engine that only burns fuel when the flywheel slows down below a certain threshold?
Yes. Benefit is consumption of pretty much any ic fuel. I think it uses less fuel at idle too. And also quite low maintainance. Don't quote me!
@@quadracycle4000 why
@@quadracycle4000 Having no throttle as such, these engines don't actually idle in the normal sense. Idling is running an engine at the lowest practical rpm. These things are all over the place because they are a primitive, obsolete design, that have been greatly superseded. These are only slightly more advanced than steam engines, which in this day & age, are just a curious novelty of a bygone era.
MicKMuzZ MKMZ who took the jam out of your sandwich?
@@uhhhhh262 who put the cream in your pie UwU
Hello, excellent. I suggest you change the emissivity of the thermographic camera to make metal thermographies, it should be lower. The polished bronze is close to 0.1 and if it is porous it is 0.5. Changing it will give you a value closer to the real temperature.
Great video
You should build a phone charger out of it :D
You need to give that engine a load to run!
Why do you think it comes with 2 giant flywheels? They"re dual purpose
JohnnyQ90 do a showcase of all your work!
More enjoyable sound when under load!
Sounds like my rear end after a night of draft beer.
It sounds like my old Passat 32b which had an worn timing belt. If you would turn it off it kept on running irregularly because it self-ignited the fuel... :-D
Sounds similar to when oil is slowly weaping past a ring on a diesel engine and it starts to run on its own oil.
heyy, jij kijkt toch ook mastermilo, leuk je hier te zien
@@HvV8446 Yep, hier ook vaste kijker. Kom er gezellig bij :-D
@@paulterhaar4862 Johnny speelt met motoren zo groot als een koffiemok, en Emiel met motoren zo groot als een auto.
Leuk he? 2 van die uitersten?
@@HvV8446 Rozehartjeskussentjes ;- )
This little motor in a RC tractor would be so sick. Geared way down for max torque. Or possibly a little gear box with a couple gears in it and a clutch controlled just like the steering is. That would be sick
Would grease work better for the exposed moving metal parts?
Thanks for sharing, that is a rather elaborated engine ...
Do you think this is also a reliable one ?
Interesting gov concept
Beautiful 😵
MUITO SHOW ESSE MOTOR, BRASIL OK.
I guess they never mis huh
Nova I’m glad someone said it
You got a boyfriend
I bet he doesn't kiss ya
Moah
That is sofa king cool!!
You just made all the germans drool over this piece of machinery.
You should run something off of those engines like a generator
outstanding!!!
Hey johnny next project increase fuel tank and make a working generator....please
Load on this engine would make it usefull, i agree
I'd like to see if one of these little engines could run a 12vdc generator and produce 1 or 2 amps to power some small items..
OK Jonny, what you gonna do with this beauty? OH and Bangood,SHUT UP AND TAKE MY MONEY!
I hope KFC aren't reading this. That's their slogan!🐔
Well at least it is in my country. They don't use "finger Licking good" anymore!😄
Nice one
very genius
Fantastic!!!
i would love to pull that little bar that stops the rod from hitting the cam back and let it run as hard as it can
I want one!!!! Please and thank you!
Anyone from the Van Wert County Fair will immediately think of ice cream when they see this.
Small but looks powerfull
can you attach a rubber band and transfer the load to something else like the larger working class ones do?
Love all your videos!
I also love a lot of the music in these videos, maybe in description you could add the music track you're using for that video? Thanks
...anyone know the music track in this video?
Interesting! The centrifugal clutch is some sort of idle control? :-)
Quite powerfull for the size... 😗
My car does this alot.
Could this power a fine lined rowing boat.
Sounds just like the Harbor Freight 2-stroke generator.
How does the valve without rocker open?
0:49 Cam driven water pump
So exhaust valve is always open when miss, and only closes on hit?
Yup. The latchout mechanism will hold it about 95% open when the engine gets going fast enough. It's only held 95% open because the latchout mechanism needs to be able to release and this happens when the cam lobe nudges the follower while engine speed is below governed speed. Cam lobe picks the valve up off the latchout, arm pops out of the way, valve then closes.
Much easier to see on larger engines but works fine here.
@@TestECull thx i was wondering the same
Hit and miss?
I guess they never miss
huh
shut up Visco girl
Why does one of the valves in the head not have a rocker or lifter ?
very cool! has the proper sound and and everything haha. a bit too beautiful tho lol but that's imho
For god sake, how this video can have a single dislike ?? !!! Proposal to UA-cam: Rename dislike to Jealousy button please.
Very nice video and realisation !
where did you buy all of your engines
I guess it never miss huh
I wish these things used magnetos for ignition rather than destroying alkaline batteries left right and center. Pretty snazzy engine though! Maybe not too hard to rig it to run a generator and recharge nickel based cells in the battery holder while in operation?
It's more than a toy i would like to buy
Nice sir
Very cool
why would you want to use a hit and miss engine ? or more in what would you use it ?
I like the moter use something with it
Nice!
Давай больше про этот двигатель видео.
Маховик сделай тяжёлый и приделах генератор, круто получить маленькую электро станцию
Awesome 🔥♥️
It seems like the engine's got decent torque.... I'd bet it would work well with a PENCIL SHARPENER! No really.... just imagine pulling out a hit and miss pencil sharpener during class lol
nice 👍